Upgrading OS X 10.3.9 to Leopard

I would like to install Leopard. After some research, I've purchase Leopard 10.5.1
and this is my laptops' details.
Processor 1.2 GHz power G4
Memory 768MB DDR SDRAM
Machine Model: iBook G4
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.2 GHz
L2 Cache (per CPU): 512 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.8.5f0
beside installing leopard DVD, what else should i do to my laptop? increase memory??and so on...
I am really bad at this, even though i have been using mac for past 10 years...in the advertising company..now i really have to do something with my personal laptop, i can't connect to my iphone at all, lots of programs are way too slow..
please advice..
I have already bought leopard DVD, but have not done anything yet.
thanks thanks!

Welcome To  Discussions minjungko!
As a precaution, before upgrading the OS, you should create a backup of the entire system, or at least, any data you do not wish to lose or corrupt.
In addition to the Archive & Install procedure, there is also a Simple Upgrade, or an Erase & Install option.
Review the info here About Installation Options.
Specifically; "About Upgrade to Mac OS X
Upgrading to Mac OS X takes a little longer than installing it on a volume without Mac OS X, but it is the least intrusive way to install--most of your existing settings and applications are left untouched during an upgrade. In other words, you won't have to configure a lot of settings afterwards."
ali b

Similar Messages

  • My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

    y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

    Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

  • How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.

    I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.  I've also installed the 10.5.8 combo update but that didn't help it.  I've tried restarting the macbook with the disc in, holding c, all that.  Why won't this work?!

    Zap the PRAM and Reset the SMC, then try again.

  • What is the best way to upgrade my OSX 10.4.11 to Leopard??

    I want to use Mackeeper but my Mac, i assume is too old and needs an upgrade. Do I upgrade to Leopard and if so what the best way?
    Thanks

    as for upgrading, depends what model you have.
    Leopard is indeed pricey; it was pricey when it first came out and many resellers now ask a premium for it.
    Snow Leopard may be an option, at $29 it's not a bad bargain. However, you could have grief with printer and scanner drivers, and other software needing updates (Adobe for one) many of them not free.

  • When I upgrade from OS10.5.8 to Snow Leopard will all my data transfer.  If I need to back up what is the best way to do this?

    I plan to upgrade from OS10.5.8 to Snow Leopard. Will all my data, applications and settings transfer automatically?
    If I need to back up what is the best way to do this?

    If everything works perfectly, your data should not be touched.
    Personally I never trust my data to everything working perfectly.
    I always backup everything twice at least.

  • Just upgraded my iMac to OS x snow leopard. trouble now with my printer. I've disconnected and reconnected. Does not seem to recognize printer. It is listed as the default printer

    just upgraded my iMac to OS x snow leopard. Now I have another problem. Printer not working. I've unplugged and replugged, nothing happens
    HELP
    thanks in advance

    Go to the website for your printer manufacturer and check if there are SL compatible drivers available for your model. This is not an unusual issue, and if the printer's not too old, the updated drivers should be there.
    If you can't find one on the manufacturer's site, try Apple Support Downloads and look back through the updates in there; Apple has issued generic updates for a number of printers since SL's release, so you may find one that way.
    After installing the new drivers you'll need to setup the printer again.

  • I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

    I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

    Niel...
    I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
    thank you for your time and help,
    Dennis

  • I'm trying to upgrade from 10.5.8 to Snow Leopard

    I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.".  Isn't Snow Leopard 10.6?....so now what?

    It sounds more like you are trying to use an updater rather than the Snow Leopard installer DVD. You might read over the following:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • How do i upgrade from os x 10.5.8 leopard to the newest software?

    I would like to get the newest software for my macbook. I run system os x 10.5.8 (leopard i guess).
    Thanks for answering!
    My problem is: i dont have the app store installed. So how can i upgrade?!

    You can purchase Snow Leopard from the Apple Store ( and numerous resellers). It costs about $30, plus state taxes.
    10.6.6 up to 10.6.8 will install the "App Store" where you can purchase and download "Lion" (10.7).
    Make sure your machine meets the Lion install requirements before you buy.

  • Recent upgrade of MAC to OS X Snow Leopard.  Using a kodak easy share 2730 digital camera will not download as pix.  States cannot read  Have I Photo 08 7.1.5.  Is this the problem?

    Recent upgrade of MAC to OS X Snow Leopard.  Using a kodak easy share 2730 camera cannot open pix in I Photo.  States cannot read  Presently have I Photo 08 7.1.5 .  Does this have to be upgraded?  No problems downloading from this camera previously

    There's a long standing issue with Kodaks and OS X. Workatound: use  a USB Card Reader.
    Regards
    TD

  • HT1444 can i upgrade osx 10.5.8 to snow leopard and how?

    How can i upgrade my  10.5.8 to snow leopard???

    Phone the Apple Store and order a Mac OS X 10.6 DVD.
    (69525)

  • I just upgraded my mac book pro to snow leopard, now my I photo library dissappeared

    I am a novice in all things technical and I need some help figuring out my I photo library.  I bought my Mac Book Pro in 2009 and shared/transferred all information from my G5 (2004) to my laptop.  I Photo was also transferred and I have started to add more photos to this laptop.
    I just upgraded my mac Book Pro to Snow Leopard and now when I open my Iphoto library it shows  some of the library but now all.  My husband said it is still there but the system is not able to look in the right place due to the sharing...so I am totaly confused?????
    WHen I go to the Information it syas it is Where: /users/shared
    Under sharing and permission it says: You have custom access
    vivianlie read and Write (but this is in light gray)
    Everyone (also in light gray)
    NOW: My old and faithful G5 all of a sudden is telling me this morning that in order to open I photo I
    need to upgrade to work with this verion of I photo
    Your photo library will not be readable by previous versions of I photo after the upgrade.
    What should I do now?
    Thanks so much for any tips and ideas...

    On you MBP try the three fixes below in order as needed:
    Fix #1
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - reboot, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
    Select the options identified in the screenshot. 
    Fix #3
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    On your G5 make a temporary, duplicate copy of the library and run the same 3 fixes. 
    OT

  • I have 10.5.8 and want to upgrade, Do I have to download Snow Leopard before download the Mountain Lion?

    I have 10.5.8 and want to upgrade, Do I have to download Snow Leopard before download the Mountain Lion?

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Upgrading from 10.4.11 'Tiger' to Leopard

    Hi, I have a mac running on 10.4.11 and someone bought my daughter 'iLife 09' as a Christmas Present but we cannot install it unless we have Leopard Software. Is there anyway to 'upgrade' to Leopard without having to go out and buy a whole new Snow Leopard Software package. I took the iLife 09 back to the apple store to get a refund - because I thought I might as well just buy the new Snow Leopard as it is included in this - but as it had been opened (my daughter tried to install it) they would not give a refund. So if I can upgrade at a relatively low cost to Leopard, then I can install iLife so it won't have gone to waste. Can anyone advise? Apple told me to ring one of the London stores and ask for the 'Archive' department, but I'm sure I read somewhere that it is possible to upgrade online. Look forward to hearing from .... someone ... ?! Thanks. Shona

    Kappy wrote:
    Alternatively you can purchase the Apple Boxed Set at $169 USD that contains iLife, iWork, Leopard, and Snow Leopard.
    AFAICT, the boxed set doesn't contain a separate Leopard installer, only Snow Leopard, which may not work on the iMac in question. Apple's phone sales is the only Apple outlet for the retail Leopard installer—$129 USD.
    mstetz wrote:
    It's too bad that it would violate Apples TOS if you bought the US$30 Snow Leopard upgrade intended for Leopard users and installed it over Tiger.
    That's not true. See http://discussions.apple.com/thread.jspa?threadID=2304131

  • Can I upgrade from Panther 10.3.9 to Leopard 10.5.2?

    I have a Powerbook G4 running 10.3.9. Can I use the OSX 10.5.2 disks from a newer MacBook Pro to upgrade the G4? I tried but a message comes up saying 'you cannot install this software on this computer' but I'd like to know why.

    Limnos is correct. Also, note, the Find File system of 10.5 is much weaker than 10.3.9 for locating files quickly by name. Though if you find files mainly by content, then it is better to have Spotlight. See this thread on how difficult it is to work with Spotlight based systems:
    http://discussions.apple.com/thread.jspa?threadID=1861415&start=0&tstart=0
    Amnesty offers Dashboard Widgets without Tiger or Leopard:
    http://www.amnestywidgets.com/WidgetBrowser.html
    Launchbar offers almost the same facilities as Spotlight without getting rid of the Find File in the Finder that is faster for simple find by name file finding:
    http://www.obdev.at/products/launchbar/
    Maybe this is an opportunity to decide if you really want to upgrade that machine to Leopard or Tiger, or just stick with Panther. Unless you have some software that is Mac OS X 10.5 or 10.4 only compatible, I see no reason to upgrade your Panther machine to Tiger or Leopard. Furthermore, Upgrading to Leopard will disable the Classic environment, unless you add an Firewire external hard drive with 10.4.11 or earlier, or erase and partition your hard drive to have 10.4.11 or earlier on it.

Maybe you are looking for

  • ITunes Won't Open; Get Option To Send Error Report

    Whenever I try to open iTunes, I get the message, "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." I have the option to either Debug (which does nothing), Send Error Report, or Don't Send. I have tried restar

  • Use of 0REFPER in multiprovider reporting with virtual provider in BCS

    Hi all, We're using the multiprovider reporting option in BCS 6.0 / BI7. As you may know the data in the 'closed periods' provider is populated with closed requests, which need not necessarily be for individual periods (this is different to BCS 4/BW3

  • How do I save a Numbers spreadsheet as an earlier version

    I have just upgraded to Yosemite from Snow Leopard.  I have a spreadsheet which I have sent to a third party and they are unable to open it as they are on an earlier version of Numbers.  How do I save my spreadsheet in the format which they can open?

  • Nokia E65 themes

    help plz... my nokia e65 themes can't be deleted.. i have search it through e65 file manager (from the handphone and pc suite) but i still i can't find the theme so i can't delete it.. plz help.. T_____________T

  • Is there a way to turn backlight off, permanently,...

    Often in bright light I can read the screen just fine without backlight. Is there a way to have the backlight (and keyboard light) NEVER come on?