Upgrading pcre to 8.34 causes errors in mediawiki

A breaking change in pcre-8.34 causes a bug in mediawiki where many of the pages show up blank (with no content), because of a PHP error happening under the covers. The bug has been reported and fixed upstream.
This won't be fixed in the Arch package until the new mediawiki release, but until then, these steps worked for me:
Downgrade pcre to 8.33.
Restart your machine. For some reason just restarting Apache didn't fix the issue for me, but restarting my whole machine did. I probably just missed a step.
Edit a page in your wiki and save it, without making changes. At least for me, this seemed to fix all the other pages.
There's more info at the linked bug, but these steps might help any Arch users running into the issue.

This is already fixed in the arch package. I'd also recommend to apply the patch to mediawiki if you are not using the package from the repos rather than downgrading pcre.

Similar Messages

I-Tunes upgrade failed and has given me errors.

Yesterday I attempted to upgrade I-tunes when prompted however the upgrade was unsuccessful and has caused errors. Today when I booted up my computer I got runtime errors and was unable to open I-tunes as a .dll file was missing. The error message recommended downloading i-tunes again so a uninstalled I-Tunes and then tried to download again but I get this message. "Service "Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services" If I ignore the message it just keeps coming back to I have to Abort. I now have no I-tunes. Any help you can give me would be greatly appreciated.

Hello there, klittee.
In some cases it's necessary to remove all traces of iTunes software. This has to be performed in a very specific fashion. The following Knowledge Base article outlines those steps:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, this article provides some additional steps to try:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Bug Report : Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error. "Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)

Upgrade stoped in phase "RFCCHECK_INI". Error: " RFC_ERROR_SYSTEM_FAILURE"

Dear friends,
Please take a look of this case. Is related with a SAP 4.6C (I386/Oracle) upgrade process to SAP ECC 6.0 (I386/Oracle).
Thanks for any help.
Xavier Pol
Case:
====
"RFC_ERROR_SYSTEM_FAILURE" raise in phase "RFCCHK_INI" running the Upagrde Asistance. This is the error show:
Error: RFC of "subst_get_uvers" failed.
Key : RFC_ERROR_SYSTEM_FAILURE
message:
User not authorized. Sesion terminated.
Aditional Information:
========================
- SAPup version (SAPup -V):"This is SAPup version 7.00/2, build 24.067"
- The logon in client "000" with user DDIC, was succesfull
Log RFCCHECK_INI.LOG
===================
1 ETQ201XEntering upgrade-phase "RFCCHK_INI" ("20070605161205")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ220 Reading table "UVERS" via RFC
4 ETQ359 RFC Login to: System="PRD", Nr="00", GwHost="sapupg", GwService="sapgw00"
4 ETQ359 RFC Login to: System="PRD", Nr="00", GwHost="sapupg", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_GET_UVERS" by RFC
2EETQ360 RFC of "subst_get_uvers" failed:
2EETQ361 code/exception : SYSTEM_FAILURE
2EETQ362 key             : RFC_ERROR_SYSTEM_FAILURE
2EETQ364 message         :
2EETQ399 User not authorized. Session terminated
4 ETQ359 RFC Login to: System="PRD", Nr="00", GwHost="sapupg", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "SUBST_GET_UVERS" by RFC failed (error-status "-2")
4 ETQ239 Logging off from SAP system
2EETQ217 Reading UVERS entry via RFC failed
1EETQ204 Upgrade phase "RFCCHK_INI" aborted with severe errors ("20070605162847")

Greetings All
I am doing a CRM upgrade and I get this exact same error. The DDIC passwords were changed in the 000 client and 001 clients from the default. (question how do I check the shadow system?) I updated the parameters in the SAPup via
set DDICpwd
set shdDDICpwd
and yet I still get the error
Should I reset the DD pwd to the SAP default then update the SAPup parameter with the new password?
I check the function module SUBST_GET_UVERS on se37 for execute the test and execute and the table returns with 0 entries under Tables.
TT_UVERS Value 0 entries
Is this the problem? If so how can this be resolved?
Please help, any feedback is much appreciated.
ps...how and where do I find the RFCCHK_INI.LOG file?

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

Does upgrading OSX 10.6.8 cause PhotoShop 9.0.2 to stop working?

Would upgrading OSX 10.6.8 cause PhotoShop 9.0.2 to stop working?

A Safari upgrade will not affect PS. An OS X upgrade, however, could. See App Compatibility Table - RoaringApps.

Premiere CC 2014.1 Blu-ray MPEG 2 export causing error in Sony DVD Architect Pro

I've filed a Bug Report for this but wanted to post here in case it helps anyone else or on the off chance someone can give me a solution / better work around.
Something has changed in the results of a Blu-ray MPEG2 export from Premiere 2014.1 vs those of the previous CC version. The result is that my authoring software of choice, Sony DVD Architect Pro, fails to prepare a disc image giving an error in the final stage of preparation. This workflow has been working fine for 2-3 years.
My work around is to export to original format (mxf / XDCAM EX HQ) and then go back to Media Encoder CC rather than 2014 to produce the Blu-ray MPEG2 file, which works without problem.
Here's a copy paste of my bug report in case anyone with a similar setup has an opportunity to replicate (I'd be very grateful to anyone able to confirm whether its a bug or something specific to me that I might be able to fix).
******BUG******
Export from Premiere 2014.1 directly or via Media Encoder of MPEG 2 1080 50i Blu-ray files causes error in preparation of Blu-ray disc in Sony DVD Architect 5.2.
This error does not occur when using the same Media Encode export preset in the previous version of Premiere Pro CC / Media Encoder.
Steps to reproduce bug:
1. Export Sequence from Premiere
Export, in my case XDCAMEX 1080i HQ, using a media encoder MPEG 2 Blu-ray preset:
Preset Name: HD 1080i 25
Format: MPEG2 Blu-ray
Bitrate Settings: Medium (Target 25Mbps)
2. Create DVD Architect 5.2 project
Set up as single movie Blu-ray project in DVD Architect:
Disc format: Blu-ray Disc
Resolution: 1920*1080
Framerate: 35 interlaced
Choose the file exported from Premiere
3 Prepare Disc
- Select Make Blu-ray Disc
- Click Prepare
- Choose Location of iso
- click next then finish
Result
Around 50% - 60% through the process the following error is displayed:
An error occurred while preparing compilation
Details:
File name: STREAM/00000.m2ts
Status: TSWrapper.dll::CTSWrapper::ProcThreadMain::Failed to read ES file. - The ES file may be shorter than the size described in the MUI file.
Expected results:
A shiny ISO ready to be burnt to disc and sent sent to eager customers.
Its taken me a full day and a half to isolate problem - someone remind me why I fall for the software updates every time?!
Cheers
Iain
Other details:
Windows 7 pro 64 SP1
Intel Core i7 950 @ 3.07GHz
RAM 24.0GB
ASUSTeK P6T DELUXE V2
1279MB NVIDIA GeForce GTX 470

There is a known bug in the H.264-Bluray export. I assume it has nothing to do with your issue, but perhaps it will give you something to consider.
https://forums.adobe.com/message/6848505#6848505
It appears due to a malformed xmpses file. It creates a problem on import into Encore, and I think it should do the same upon import into Architect or it would be ignored entirely. The test is to delete the xmpses file and see if that avoids the issue.

Changes in RPCBURZ0 causes errors in other programs

Hello to All,
I made changes to RPCBURZ0 in order to extend the TABLE schema function to read a custom Infotype 9001.
I added the necessary code in RPCBURZ0 and the data definition in RPCFDCZ0.
The code is working perfectly , but the changes are causing errors in other country specific reports
specifically in : HINCALC0 , HCNCALC0 , and HKRCALC0 and Transports to Quality generating errors.
Error is because the custom infotype definition is not seen in these reports.
Generation of the users of the transported Includes                                                                                |
Program HCNCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HINCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HKRCALC0, Include RPCBURZ0: Syntax error in line 000021
       |   The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Looking at other H--CALC0 reports i could easily spot an include for RPCFDCZ0.
include rpcfdcz0. "customer-specific data declaration (int'l)
I wonder why this include is not in (HINCALC0 , HCNCALC0 , and HKRCALC0) !!!
I have two solutions in mind :
1. Make a custom ZRPCBURZ0 and include it in the main report.
2. Look for user exist for the three reports and add the data definition statement .
What is the best way to fix this situation ? and is there any other possible solutions ?
We are using :
   SAP ECC 6.0
   Payroll International Driver.

Alex Gorly and Matt Sullivan solved one of my issues above:
Message: Attribute 'prod' is not declared for element 'prodname'
I'm still stumpled on the other one:
Message: Not enough elements to match content model '(prodname,vrmlist,((brand|component|featnum|platform|prognum|series) )*)'
As stated above, I've even removed everything from the general rule of <prodinfo> except prodname and I'm still getting the same error. I've searched everywhere for this general rule and <prodinfo> is the only place I can find it.
What I really want is: (prodname), (vrmlist)?, (brand | component | featnum | platform | prognum | series)*
so that vrmlist is optional.
No matter what I do, unless I include a vrmlist, I get the above message. Currently, our CMS can't handle vrmlist but I don't want to remove it altogether because we may be replacing our CMS.
Help please!

I tried to upgrade itunes and i get windows error 7

i tried to upgrade itunes and i get windows error 7 - it says "The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic link library AVFoundationCF.dll

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Upgrade to itunes 7.6 now error "network connection timed out"

Upgrade to itunes 7.6 now error "network connection timed out" when i try to connect to itunes store and podcast

I did a manual install of itunes 7.6 (it refused to install through the automatic update) and now I get the same problem - itunes store won't connect.

Code 91 - Caused Error: (Object variable or With block variable not set)

Hi,
We are using FDM 9.3.1. We have enabled batch processing.
We are having following process being followed
- Batch Loader script will pull the data from dwh table for each entity, scenario, year and period
- Batch processing is set to serial and processlevel set to Up-To-Check
- We had following five files created for Location - EMAFF100
i. 1_EMAFF100_ACT_May-2011_RR.txt
ii. 1_EMAFF100_ACT_Jun-2011_RR.txt
iii. 1_EMAFF100_ACT_Jul-2011_RR.txt
iv. 1_EMAFF100_ACT_Aug-2011_RR.txt
v. 1_EMAFF100_ACT_Sep-2011_RR.txt
Batch loader process completed the processing for May - 2011, Jul - 2011, Aug-2011, Sep-2011.
But for Jun 2011 it has given the following error in the 'tbatchinformation' table and failed at import stage.
40751.6239236111 1_EMAFF100_ACT_JUN-2011_RR.TXT 2 2 91-Object variable or With block variable not set
When we checked the view error log from tool menu we found following
** Begin FDM Runtime Error Log Entry [2011-07-27-14:58:29] **
ERROR:
Code......................................... 91
Description.................................. File [1_EMAFF100_ACT_Jun-2011_RR.txt] Caused Error: (Object variable or With block variable not set)
Procedure.................................... clsBatchLoader.mFileCollectionProcess
Component.................................... upsWBatchLoaderDM
Version...................................... 931
Thread....................................... 5600
IDENTIFICATION:
User......................................... ncreighton
Computer Name................................ HYAPSDEV1
App Name..................................... EMATTEST
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ hydev_serv
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... EMAFF100
Location ID.................................. 762
Location Seg................................. 16
Category..................................... ACT
Category ID.................................. 13
Period....................................... Jun - 2011
Period ID.................................... 30/06/2011
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... False
Is Auditor................................... False
We then re submitted data for Jun period and saw batch process got successfully completed and June data got imported successfully and also rest other processes got through.
Can any one provide exact cause for this error? As we have automated the data load from DWH to FDM And then to HFM. Hence when such error comes it disturbs lot of processing there on. Appreciate your early response.
Thanks in advance.

Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch

Why sys_extract_utc(sysdate) never causes error in pl/sql block?

Oracle 11.2
I cannot use
SELECT sys_extract_utc(sysdate) FROM DUAL But I can use
v := sys_extract_utc(sysdate)in a procedure or a trigger without causing any compile or run-time error.
In my opinion, the return value of function sysdate doesn't contain any timezone info, so it should not be able to be used as the parameter of function sys_extract_utc, because it needs timezone info to do the conversion.
Any clues?
Thanks in advance.

Kiran wrote:
use systimestamp it will contain timezone.I know, what I don't know is why sys_extract_utc(sysdate) can be used in procedure without causing any error. It should cause error, right?

Reports Background Engine caused error and had to be closed

"Reports Background Engine caused error and had to be closed"
we are encountering this error when trying to run any report on some machines.with windows 2000.
we tried to login (on the machines having problems) using another windows user,
sometimes it works and sometimes not.
we also tried to reinstall the reports runtime and it never worked.
we have developer 6i, Oracle database 10g express edition.
Does anyone have a solution to this random problem ?
Thanks

dear all
you can pass parameter from form to report to close report server after close report
add_parameter(pl_id, 'oracle_shutdown',text_parameter, 'Yes');
then it will be ok
good luck
Message was edited by:
nim
Message was edited by:
nim

Deleting iMovie files & exported movies causes errors in all of iLife

I just went through quite an ordeal...
In an attempt to clean up some space, I deleted a bunch of my iMovie project files and movies after backing them up (files in the default Movies folder). I have deleted iMovie projects before with no issues.
This time, it caused errors in iDVD, iMovie, and iPhoto...it would say: "Connection failed. The server may not exist or it is not operational at this time. Check the server name or IP address and try again." It would say this over and over and over again and often completely hang up my application so that I would have to force quit. This would repeat itself over and over...
I read about this in other forums and erased .plist files in User > Library, etc...This solved the problem for other people, but it kind of made it worse for me. Long story short, I ended up having to restore from Time Machine my entire system just to get iLife working again... I also searched for Aliases and externally referenced libraries or files, and I do not have any.
So now I have those files again. I want to delete them again. But I'm afraid! (P.S. This may also be related to deleting the Aperture Trial Library in the Photos folder...I am also posting about that to the Aperture forum.)
Does anyone know what the deal with this is? How come before I did not have problems but am now? How do I safely delete iMovie files without having this happen again?
THANK YOU!

iMovie is a non-destructive editor, meaning that all original clips are maintained in the folder, even after editing. Until you render the movie to DVD, all the original files are still "in the background". Kind of hard for me to explain. Others here could give more technical details. You would have to delete your movie from the folder to regain all the hard drive space.
If your idea is to archive your movies, a better method is to record them back to tape. Otherwise, get an external drive to store the finished movies and then delete the original files.
One word of caution about emptying the iMovie trash. This has been known to cause problems with a work in progress and it is generally advised to leave the iMovie trash alone until your project is finished and burned to a DVD.

Upgrading pcre to 8.34 causes errors in mediawiki

Similar Messages

Maybe you are looking for