Upgrading portals from 3.0.9 to portals 10g (9.0.4)

has any one upgraded portals from 3.0.9 to 9.0.4 lately? i have a few questions about this upgrade process; </p>
<p>
the oracle guideline describes that there is a certain script (pobredir.sql) that you run in order to see an output file (typically by the name ... <upgrade_tmp_dir>/uppgrep2.out ).
this file lists the old and new urls for this upgrade process. are these url's the ones which appear in the user_source only or they appear anywhere in the portals (like in the portal components - pages, forms, etc).
</p>
will appreciate any helpful hints.

classic macgrubers wrote:
I only want to UPGRADE to 4.0 because I have heard some bad things about 4.0.1, and 4.0.2 closes the easy jailbreaking hole on jailbreakme.com...if I decide to jailbreak in the future.
And you HAVEN'T heard bad things about 4.0? You haven't been paying attention, then. There as many, if not more complaints about 4.0 compared to 4.0.1 and 4.0.2.
Is there no way to force it to upgrade to only 4.0? What about putting it in DFU mode, would that help?
There is no way to upgrade to 4.0 without jailbreaking the phone.

Similar Messages

  • Upgrade direct from 9i File System DB to 10g ASM instance

    Can I upgrade from a 9i file system based instance directly to a 10g ASM based instance? without the middle step of a 10g file system instance.
    Thanks
    MN

    The minimum compatibility for ASM storage system is 10.1.0, it is not possible to manage 9i instances in ASM, and there is no way to waive the 10g migration requirement.
    If you are planning to use 10g ASM storage then you will have to migrate or upgrade your database to 10g first. Next you will have to move your datafiles, control and log files into the ASM storage.
    0. Configure your +ASM instance
    1. Upgrade to 10g (Upgrade procedure) or Migrate (exp from 9i/imp to 10g)
    2. In case you upgraded then use RMAN as stated in the below given reference to move your datafiles to the ASM instance, or if you created the database in 10g make sure you defined +ASM as the default storage mechanism
    Ref. Oracle® Database Backup and Recovery Advanced User's Guide
    10g Release 2 (10.2)
    Part Number B14191-03
    Chapter 16.
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmasm.htm#i1016581
    ~ Madrid
    http://hrivera99.blogspot.com

  • Error while upgrading Portal from 10.1.2 to 10.1.4

    This is the error message I am getting when I try to upgrade portal from 10.1.2 to 10.1.4 by applying the patch.
    NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
    NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID.
    Please let me know if any has has a solution?
    ==========================================
    D:\Software\Oracle\IDM\as_windows_x86_portal_1014\mrua_051020\mrua>mrua.bat -ora
    cle_home D:\Software_Installations\OraHome_Infra_01 -oid_host <hostname> -oid_ssl_port 636
    Executing mrua.pl
    Running on Windows
    OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
    Enter the password for SYS:
    Enter the password for cn=orcladmin:
    Enter the password for cn=orcladmin:
    Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
    Calling upgrade plugin for MRUA
    Component has already been upgraded MRUA
    Calling upgrade plugin for PORTAL
    Error: Component upgrade failed PORTAL
    Error: PORTAL component version is: 10.1.2.0.2 INVALID
    Calling upgrade plugin for MRC
    Component has already been upgraded MRC
    FAILURE: Some OracleAS plug-ins report failure during upgrade.
    Log file: D:\Software_Installations\OraHome_Infra_01\upgrade\logs\mrua2007-07-1
    3_02-07-15PM.log
    Finished mrua.pl

    That didn't help for me....
    I have those things shut down already and you can see below what I'm getting on the re-run:
    -bash-3.00$ /app/oracleas/as1012portal/bin/emctl stop iasconsole
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://asdev:1811/emd/console/aboutApplication
    Stopping Oracle Enterprise Manager 10g Application Server Control ...
    Cannot determine Oracle Enterprise Manager 10g Application Server Control process; /app/oracleas/as1012portal/bin/emctl.pid does not exist.
    Oracle Enterprise Manager 10g Application Server Control may not be running.
    -bash-3.00$ /app/oracleas/as1012portal/opmn/bin/opmnctl stopall
    opmnctl: opmn is not running
    -bash-3.00$ mrua/mrua.sh -oracle_home /app/oracleas/as1014metadatarepository -oid_host asdev -oid_ssl_port 636
    Executing mrua.pl
    Running on UNIX
    OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
    Enter the password for SYS:
    Enter the password for cn=orcladmin:
    Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
    Calling upgrade plugin for MRUA
    Component has already been upgraded MRUA
    Calling upgrade plugin for PORTAL
    Error: Component upgrade failed PORTAL
    Error: PORTAL component version is: 10.1.2.0.2 INVALID
    Calling upgrade plugin for MRC
    Component has already been upgraded MRC
    FAILURE: Some OracleAS plug-ins report failure during upgrade.
    Log file: /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
    Finished mrua.pl
    -bash-3.00$ grep PORTAL /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
    2007/10/23 12:43:06.236 CST NOTIFICATION:1 Framework: Calling upgrade plugin for PORTAL
    2007/10/23 12:43:28.203 CST NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
    2007/10/23 12:43:28.209 CST NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID
    There is another oracle instance we have, the one that is hosting the LDAP server, and after the above I also tried doing a stopall there, then bringing up only the ldap server which is required for the upgrade, and then shutting down the iasconsole for that instance too so that only the ldap server remained, then re-running the portal upgrade. It didn't help.
    Any ideas?

  • Help: Upgrade portal from 10.1.2 to 11.1.1.3 Issue

    Hi Experts,
    I have to upgrade my portal from AS 10.1.2 to FMW 11.1.1.3, I was doing so following
    Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer
    According to the guide, an upgrade start point from OAS 10.1.2 to 11g is supported (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10130/upgrade_classic.htm#BABFFIGJ)
    And I installed new 11g middle tier with old portal schema, checked and updated the new oracle home with ua, it's all successful, but in the last step, upgrade portal schema failed, I found below error message from log:
    Portal SQL script started at Wed Jul 27 01:08:32 2011
    Running upg/frwk/popinv.pl### Show errors and warnings
    Step started at Wed Jul 27 01:08:32 2011
    ### ERROR: WWU-01013: Upgrade terminated with the following errors:
    ### 173 : ### ERROR: WWU-00022: Version 10.1.2.0.0 of Oracle Portal/WebDB is not supported
    ### Upgrade aborted at Wed Jul 27 01:08:32 2011
    ### Precheck ended with status :13
    Question1:
    Why 10.1.2.0.0 is not supported, which should be supported according to the doc.
    And according to the doc, even without upgrading the schema, the portal can still be functional in a limited manner, without 11g new feature.
    Question 2:
    In my case, I can not access my portal page by neither http://host:7783/portal/pls/portal(which is old portal address), nor http://host:9001/portal(according to wls console), they return 404 error or just a line reading "PPE is working."
    Am i missing anything when upgrading?
    Thanks for any help.
    Todd

    This restriction is most important for Oracle Portal users. Specifically, if you are using Oracle Portal 10g Release 2 (10.1.2.0.1) Standard Edition One, you must upgrade to Oracle Portal 10g Release 2 (10.1.2.3) before you can upgrade the Oracle Portal schema to Oracle Portal 11g.

  • Help needed on upgrading portal application from sp3 to weblogic portal 10

    Hi Guys
    I have an application which is currently running on BEA Weblogic Portal 8.1 sp3. We need to upgrade our application from 8.1 sp3 to BEA Weblogic 10 version.
    (1) Is there any way for upgradation from 8.1 sp3 to portal 10 directly or do I need to upgrade it from sp3 to sp4 and then from sp4 to portal 10? Pls clarify?
    (2) How reliable are the BEAs automated scripts for retaining the personalization/customization of my application on sp3 to upgraded version i.e portal 10?
    (3) I believe, we do not need to do any coding/design changes/architectural changes into my application for this upgrade.
    Any help on this will be highly appreciated
    Thanks
    Jameel

    1) I believe only sp4 and later to weblogic 10 is supported (http://www.bea.com/content/news_events/white_papers/BEA_WL_Portal10_ds.pdf)
    so yes i think you need to upgrade from sp3 to a later version of the service pack
    2) You tell us :)
    3) Depends on your application and the features you have used. E.g. I believe Content management has changed between sp3 and what 10 supports.
    regards
    deepak

  • Unable to Upgrade Portal Webdynpro from SP9 to SP11

    Hi,
        I had upgraded my ESS to SP11 and now i think i need to upgrade portal Webdynpro Component to SP 11 inorder to work on ESS iviews and i'am trying to deploy Portal Webdynpro Component through JSPM,it is not showin any error but it is not uploading the .ear files(Portal Webdynpro SP11 files).I even tried through SDM same thing happend.Anybody please guide me to Upgrade my Portal Webdynpro component and is it necessary to Upgrade Portal Webdynpro component as i upgrade my ESS to SP11?
    With Regards
    Pradeep.B

    Praveen,
    Stop SDM and restart it in integrated mode using the command : sdm jstartup "mode=integrated" .
    Now try to deploy your ear file through SDM.
    If you face error still,check sdm log files and paste it here,we can identify the issue.
    Regards,
    Karthick

  • Intermedia problem after upgrade Portal 3.0.7 to 3.0.9

    Hello,
    I had several reports in Portal 3.0.7 with embedded Intermedia data ORDSYS.ORDIMAGE - they worked fine in Portal 3.0.7. After I upgraded iAs from 1.0.2.0 to 1.0.2.2 and Portal to 3.0.9. in all my reports I see only AAAHLOAADAAAAIFAAG instead of images. The same situation if I create new report with ORDIMAGE data.
    Have anybody met this problem?
    Thanks in advance for your help.
    Egor.

    It is a bug that has been identified and and rectified. I am sorry there are no workarounds. I am afraid you will have to
    wait till the next release to solve your problem.
    Regards,
    Sunil.
    null

  • Upgrade Portal in OCS 10.1.2 to Portal 10.1.4

    Hi all,
    Can I upgrade Portal in OCS 10.1.2 to Portal version 10.1.4? Will it make any impacts on other Collaboration components?
    Thanks,
    Vietdt

    It will work and it os supported as from OCS 10.1.2.2. You must upgrade the portal before upgrading the ocs.

  • [Urgent] Some questions about Oracle Portal 10g - 11g upgrade

    Dear friends,
    We are under doing upgrading assessment of Oracle Portal from 10g to 11g. After reviewed the 'upgrading guide', we still have some questions as below:
    1. Whether the 'Instant Portal' feature remain in Oracle Portal 11g? If yes, how to migrate the Instant Portal 10g sites? If no, any workaround?
    2. Whether the old 10g Page Group and Pages will be still available after 11g upgrade? Also can customer import the old 10g transportset into Portal 11g?
    3. How about the customized Portal 10g objects (such as customized template, style, attributes) after 11g upgrade? Still be usable?
    4. Customer use PDK to develop many portlets in 10g. Can they use JDeveloper 11g to migrate their old project to 11g automatically?
    Thank you in advance and any comment are welcome.

    1. Whether the 'Instant Portal' feature remain in Oracle Portal 11g? If yes, how to migrate the Instant Portal 10g sites? If no, any workaround?Instant Portal is not available anymore in Oracle Portal 11g. The Instant Portal page groups will be migrated to standard Portal page groups. Maintenance of the Instant Portal can be done with the standard Portal tools. The Instant Portal tools are not available anymore.
    Whether the old 10g Page Group and Pages will be still available after 11g upgrade? Also can customer import the old 10g transportset into Portal 11g?Old 10g Page Groups are migrated to Portal 11g. They will still be available after the upgrade.
    Export/Import through transports sets has always been limited to instances of the same version. It is not supported between versions as documented in the Administration Guide :
    [11.2.1|http://download.oracle.com/docs/cd/E14571_01/portal.1111/e10239/cg_imex.htm#CCJBCCGD] System Requirements
    Before exporting and importing content, ensure that your system meets the minimum system requirements, as described in this section.
    Notes:
    * Export and import functions only within the same release of Oracle Portal and the same patch release, for example, release 10.1.4 to release 10.1.4 or release 11.1.1 to release 11.1.1. You cannot export and import between two different releases, such as release 10.1.2 to release 10.1.4 or release 10.1.4 to release 11.1.1.
    How about the customized Portal 10g objects (such as customized template, style, attributes) after 11g upgrade? Still be usable?Customized objects get migrated as well. Certain types (e.g. PL/SQL item types) need to be checked after upgrade as the behavior of the PL/SQL code may differ between database versions. This is particularly of concern when the 10.1.4.x Portal uses a 10.1 database. A database upgrade to either 10.2, 11.1 or 11.2 is necessary as Portal 11g is not supported with RDBMS 10.1.
    Customer use PDK to develop many portlets in 10g. Can they use JDeveloper 11g to migrate their old project to 11g automatically?Never done this, but the Portal framework is able to consume JPDK providers which are running in older versions of the toolkit. If the providers are running in standalone OC4J containers, you would be able to upgrade the framework and keep the providers in their OC4J containers. This will allow you to focus on the framework first and worry about your providers later.
    Thanks,
    EJ

  • How to upgrade tracks from NetWeaver 7.0 to 7.3?

    Hello!
    I'm trying to create a Web dynpro 7.3 track from a 7.0 track. It's for a sandbox install of 7.3 so I don't want to change the current track or SC but I want to include all my developed code for testing purposes.
    I've read about track migration here:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8061e964-2036-2e10-ee9d-ef21d174fdd9?quicklink=index&overridelayout=true
    and here:
    Migrating/Upgrading NWDI from 7.0 to CE 7.1
    but it's missing some important information. How do I get my current code into the new track? It just says "Import your SCs and required SCs in the new track in NetWeaver 7.3".
    My old track is called Extern and contains a SC called ExternSC. The new track is called Portal73 but which SC should it contain?
    I can't check in my old SC without adding a dependecy to it.
    Should I create a new Extern73SC with dependency to the old one? Then it wants to check in the old 7.0 dependencies as well.
    I want to be able to create projects from the old DCs so they can be migrated to 7.3 as well.
    The forum thread above suggest changing the dependencies of the current SC to 7.3 components  and add that to the new track, but that would break my current 7.0 track, right? I tried to make a new version of the SC with the same name but I still couldn't import the existing code.
    Is there a more complete source for track migration?
    Please help me if you can
    Regards,
    Richard Linnander
    Edited by: Richard Linnander on Jun 30, 2011 10:39 AM
    Edited by: Richard Linnander on Jun 30, 2011 10:41 AM

    Thank you for your answer!
    Just to make sure I do this correctly.
    I have a product called ExternProd (1.0), and an existing SC called ExternSC (1.0) that belongs to the product.
    Do I need to create a new product version as well?
    Otherwise I do this:
    In Software catalog in SLD on the NWDI i click "new software component version"
    In the dialog box I select ExternProd 1.0, unit Extern 1.0, enter vendor, name ExternSC and version 2.0 and click create.
    I define dependencies to SAP SCs but NOT to ExternSC 1.0.
    Now if i go to the product I see two software units for ExternProd 1.0.
    I add ExternSC 2.0 to my track and then I should be able to forward the old SC and import it in development, or should it be exported and checked in?
    Is this what you meant?

  • Upgrade 9iAS from 1.0.2 to 1.0.2.1

    I want to upgrade portal from 3.0.6.6.5 to 3.0.8. I'm working on HP-UX 11.0.
    I've read on otn, that I need to upgrade also 9iAS from 1.0.2 to 1.0.2.1.
    Where can i find this upgrade script and some documentation about it.
    Thanks for your answers.
    Alain.

    Hi!!
    I have migrating from ias 1.0.2 to 1.0.2.1 and i want to migrate also Portal from 3.0.7 to 3.0.8 and i don4t know what are the correct steps. I read the migration document and i have minimal installatio tipe (http sever and Portal) and if don4t read bad i only have to backup the panama directory install 9ias in the same oracle home that the previous release and make changes in jserv.properties but and then i don4t know if i have to upgrade portal with the installation gives me configuration assistant or launch the pupgrade.cmd, i launch this and don4t works, i do it in a second machine but i need to do thus in our server.
    Could anyone say me what are the good steps to migrate this??
    Thanks in advance.

  • After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation

    Hi
    After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation where in case of equity knock off the amount is not get balanced even after we run legal consolidation package in group currency.
    Regards
    Vikash

    Hi sandeep ,
    Hence the problem was not there with previous versions where the .js files were simply not compressed by default.
    Solution :
    I believe switching off javascript compression is a suitable option in this case as the script files are usually cached by the browser as well and will not be transmitted every time.
    Kindly follow these steps:
    1. Enter the J2EE Config tool.
    2. drill down: Global Server Configuration->services->http
    3. on the right hand side, click on NeverCompressed
    4. on the bottom, add at the end: ,*.js
    5. Apply the changes
    6. restart the J2EE.
    After this clear the browser cache and then log onto the portal and check if the issue gets resolve
    I hope it will useful to you.
    Thanks@ Re grads
    G.srinu

  • Migrating/Upgrading NWDI from 7.0 to CE 7.1

    Hi,
    Currently we have application developed on NW 7.0 (Web Dynpro, J2EE, EJB etc) and we have NWDI 7.0 for code repository.
    Now we are planning to migrate the NW 7.0 (Web Dynpro, J2EE, EJB etc) to CE 7.1 (we have documents & procedure to do this).
    My question is:
    1. Does repository NWDI 7.0 supports for all kind of DC/applications if we migrate NW 7.0 (Web Dynpro, J2EE, EJB etc) to CE 7.1, If not what are the chanllenges?
    2. Is it required to upgrade repository from NWDI 7.0 to NWDI CE 7.1? If so how we can achieve/migrate the code to NWDI 7.1
    Please suggest.
    Regards,
    Patana

    Hi Patana,
    Let me give you some background first...
    *1) Yes, NWDI 7.0 will support all the developments that you will be migrating to CE 7.1
    2) There is no 7.1 version of NWDI, that means you ned not worry about NWDI version as, it is just a platform that acts as repository for your source code and version control.*
    So you don't need to upgrade your NWDI.
    But wait it doesn't mean that you don't have to upgrade anything from NWDI side .
    As your Application Server will now be running on 7.1 version, you will have to get a compatible CE 7.1 version of developer studio too.
    Also the Tracks that are present in your NWDI 7.0 version will be required to be upgraded with the latest build time dependent SCA files of the 7.1 version too.
    This is a step-by-step guide for setting up NWDI for Composition Environment.
    Link:[HOW TO SETUP AN NWDI TRACK FOR COMPOSITION ENVIRONMENT DEVELOPMENT (SAP NETWEAVER CE 7.1)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f?quicklink=index&overridelayout=true]
    To update all the tracks with the latest .SCA files, follow the below mentioned steps...
    1) you need to copy all the standard .SCA files of 7.1 version from the path /usr/sap/<SID>/SYS/EPS/buildarchives/ as mentioned in step 10 of the above manual to the CMS transport directory (<specified in the domain tab>CMSinbox) directory in order to make these dependencies available for your tracks.
    2) Then, in SLD you have to modify all your software components that are used in track and replace all their build time dependencies to the 7.1 version.
    3) Update the CMS,
    4) Remove and add the tracks SCs back for your track.
    5) Save the track, while saving always choose Save & Re-import button.
    6) Check-In the latest 7.1 version SCA into Development and Consolidation tab.
    You have repeat this for all the tracks.
    Please revert in case of any further clarification.
    You can also refer to the thread Re: source code of a track nwdi, for understanding how NWDI works under the hood.
    Regards,
    Shreyas Pandya

  • Are return codes from APIs different when upgrading DOT from 8.0.3 to 8.1.4/8.2.3 (7-mode only)

    Customer is looking to upgrade from DOT 8.0.3 to 8.1.4/8.2.3 (7-mode). There are no real API changes between these upgrades other than additional functionality being added. Howver, are the return codes from APIs any different when upgrading DOT from 8.0.3 to 8.1.4/8.2.3 (7-mode only)? Any help on this to help confirm would be greatly appreciated. Many Thanks in advance. Luke

    Thanks. I had the Portal 3.0.6/3.0.7/3.0.8 to Portal 3.0.9 upgrade scripts and instructions, but thought that was my last step. I hesitated on running the Portal Configuration Assistant. None of the instructions told me what to do at this point.
    Anyways, it looks that by running the Portal Configuration Assitant at the end of the 1.0.2.2 9iAS install, it created a new repository for Portal 3.0.9 in my database. Since I gave it a different schema name, I now have two portal repositories. The old Portal 3.0.6 repository (jvac_portal30) and the new Portal 3.0.9 repository (j_portal30).
    So, I assume I have to perform the upgrade scripts on the Portal 3.0.6 repository to get it to 3.0.9. Since we really did not have very much in the repository, we may just manually recreate everything in the new 3.0.9 repository. I have ssen several discussion threads about the upgrade and problems, so I am very leary to do it.
    In regards to our J Server propblem, we left for lunch. Came back and rebooted several more times, double checked all our configuration files (made no changes), stopped and restarted Apache several more times, and then by some miracle everything started working.
    null

  • Upgrade WLS from 10.3 to 10.3.1

    Hi,
    It's my first time to upgrade an WLS server installation.
    When I upgrade WLS from 10.3 to 10.3.1 where I should install the WLS binaries?
    (same directory than WLS 10.3 or a new one).
    Maybe I missed something in the doc's but in the WLS 10.3.1 upgrade guide I could only find how to upgrade e.g. security provider, domains, .... AFTER installing the binaries.
    regards
    Peter

    Hello Peter,
    I had the same problem.
    According to the install documentation for Forms/Reports you can only extend a domain which was created by the Portal, Form, Reports, Discoverer installer.
    These domain type is called Classic.
    So if you have already a domain which is still empty, remove it and create a ClassicDomain with the Forms/Reports installer.
    If your existing domain is not empty you have to create a second domain of type Classic
    Kind regards
    Juergen

Maybe you are looking for