Upgrading RAM from 2GB to 4GB on newer iMac - No Dice..?

Hello, I have an aluminum 2.4 Core Duo iMac (7,1), with 2GBs of RAM and want to upgrade it to 4GBs. Bought (2) 2GB sticks from Apple and they popped in fine. Then, I got a black screen when I restarted, would not boot. So I swapped out one of the new 2GB sticks with one of the older 1GB sticks, worked perfect, 3GBs registered. Then I shut down and tried it with the other new 2GB stick, and that also worked fine, registering 3GBs of RAM.
I reset the PRAM under both configurations and the iMac still will not recognize the 4GBs of RAM, as it will not boot up.
Any suggestions?
Thanks,
Dan

Dan,
Very strange as the iMac 7,1 can actually support up to 6GB of RAM.
0. See my signature below.
1. Just search this discussion area for 6GB.
2. See also http://eshop.macsales.com/item/Other%20World%20Computing/5300DDR2S6GP/
You wrote that you have a Core Duo, but the 7,1 is a Core 2 Duo (big difference).
I suspect that one or both of the new SODIMMs is/are bad.
1. Check to make sure that each 2GB stick is the correct speed. The label will either say: 5300DDR or 667MHz. Any other speed will not work.
2. You bought the memory from Apple, so march into your nearest Apple Store and get them to make it work.
3. Return the SODIMMs to Apple and get your money back and buy 6GB from OWC (see link above) for $40 less than you paid for 4GB from Apple.
,dave

Similar Messages

  • Upgraded from 2gb to 4gb of RAM and now my Imac freezes up all the time.

    I have a 2009 model Imac and I upgraded from 2gb to 4gb but now after about 20 minutes of the computer being on it will freeze up randomly. It could be 20 mins - 3 hours of use before it freezes up. I did my research and I'm didn't get any RAM my Imac couldn't handle...so I have NO idea what's wrong. Any help would be greatly appreciated!

    As old as it is have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    Here is a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/

  • How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?

    I have iTunes 12.0.1 on my Windows PC. I'm about to get a new iMac (hooray!) and I'm beginning the process of transferring everything on my PC to my Mac. I've got all the documents, pictures, files, etc. covered, but now I have to make a copy of all of my music.
    Most of the music in my iTunes library is not bought through the iTunes Store (I download most of my songs from the Internet). Then, after saving the downloaded song to my computer, I go into iTunes on my computer and add the song. I also add metadata like artist, album, genre, album artwork, etc. to the song in iTunes. What concerns me is that only the songs in iTunes have this metadata: the original downloaded files I saved onto my computer don't have any metadata.
    I really don't want to have to go through the long and tedious process of adding artist/album names, genre, etc. to every single song in my iTunes library on my new iMac. How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?
    Thank you so much for any help!

    Hello! I'd like to learn more about Home Sharing. To do this, would both my PC (which I hope to get rid of) and my new iMac need to be plugged in?
    Also, after Home Sharing with the old PC is initiated, I understand that all my songs would appear on my iMac. Is there a way to copy all of these (with album artwork, name, artist, etc.) directly to the iMac's hard drive and then disconnect home sharing so I can get rid of my PC?
    Thank you!

  • How do I move data from my iphone to a new iMac?

    I just purchased a new iMac.
    I would like to move all data (music, apps, etc.) from my iPhone to the new iMac - how do I do that?
    Also, I have an old iMac that is no longer working but was one of the 5 computers that I had authorized for sharing music.  Is there a way to de-authorize that computer, even if it does not boot, to 'reclaim' a sharing computer?
    Thanks...

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Migration Assistant and best cables to trans. info from a Mac G4 to new iMac?

    Baest Cables to use with Migration Assistant from a Mac G4 to new imac?

    No you can not use a direct USB to USB connection. You can however use a USB External Hard Drive and copy your music, photos and other files from the G4 to the External Hard Drive, then from the External Hard Drive to the new iMac.
    The best option is FireWire, followed by using an External Hard Drive, then an Ethernet connection to migration from the G4.
    See > Mac OS X v10.6: How to use Migration Assistant to transfer files from another Mac

  • How can I import Quicken Files from a G4 to a new iMac.

    I need to transfer my Quicken 2007 files from my G4 to my new iMac. My G4 is running OS 10.4 and Quicken Essentials for Mac requires 10.5 or above. My G4 cannot run 10.5. My iMac is running Lion and I've heard if I load Mac Essentials on my iMac, I won't be able to import the files from my G4. Anybody have any ideas?
    I've been considering making a copy of my system and applications folders on an external firewire drive, then connecting it to my iMac. I thne plan to use the external drive as a startup disk and load Quicken essentials on the external drive. Then, once eveything is loaded, I was hoping I could copy the files and pull them over to my applications folder on my iMac. Does anybody know if that will work?

    I'm in the same boat!!! Been a long Time Quicken user and they finally made the software almost un-useable. I have 2 intel laptops in the house and a G4. The intel systems are both running Lion had I known the quicken conversion software dosen't run on Lion I would have converted all my quicken backups (going back to 1997) before installing Lion.
    To answer your question, what I have found out is convert all your files on Lepoard then update to lion. The conversion software that comes with Quicken Essentials will work on Lepoard. Thats how I converted mine. But last week I needed to go back to and old backup looking for some transactions and found the Lion issue. Had to boot up the G4 and load the old Quicken software to look at the backups.
    Been really thinking of switching to another product.

  • HT4527 I'm transferring my iTunes library from a PC to my new iMac via home sharing.  I've followed all of the steps to "import" my library but the "import" button is greyed out.  Any suggestions?

    I'm transferring my iTunes library from a PC to my new iMac via home sharing.  I've followed all of the steps to "import" my library but the "import" button is greyed out.  Any suggestions?

    There is no need to import anything or use Home Sharing.
    Copy the ENTIRE iTunes folder from the old computer to the new computer, everything will be exactly as it was.

  • How do i get my data/apps from my powerpc to my new imac?

    how do i get my address book data from my powerpc to my new imac?

    Your best bet is to use Setup Assistant (preferred) or Migration Assistant to set your new Mac up just like the old one.  That will transfer old 3rd-party PPC apps, but they won't work, and you can delete them afterwards.
    See How do I set up a new Mac from an old one, its backups, or a PC?

  • I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

    I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

    Move iTunes from PC to MAC, http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

  • How do I transfer the music from my iPod to my new IMac computer (95% of the music on it is from CD's I own)?

    How do I transfer the music from my IPod to my new IMac computer?  I just changed from a PC to IMac. 95% of the music on it is from CD's I own and the ITunes on the new IMac is only recongnizing the ones I bought off of ITunes.

    That is correct.  The music sync is one way - computer to ipod.  The only exception is itunes purchases.
    Copy everything from your old computer, or your backup copy of your old computer to your new one.

  • I replaced my iMac and want to put apps from my phone onto my new iMac. How do I do that?

    I replaced my iMac and want to put apps from my phone onto my new iMac. How do I do that?

    Connect it to the Mac and use the Transfer Purchases function in iTunes.
    (69129)

  • Migrating from an eMac to my new iMac

    Hello,
    I need to migrate all of my info from my eMac to my new iMac.
    How is this done between the computers? Do I use a USB cable?
    What steps do I need to take?
    Thanks

    Cat-5 is just a speed rating for the Ethernet cable (higher number means faster). If you look closely at the cable, the rating is usually printed along its length. Cat-5 will give you at least 100 mbps. Cat-5e or Cat-6 will allow gigabit (1000 mbps) speed. The recent Macs all have gigabit Ethernet ports. Your eMac probably has 100Base-T (100 mbps) Ethernet, which is sill pretty fast for networking.
    Can I use the ethernet cable from that connects my cable modem to my iMac?
    Yes. You can use any old cable, and it will work as long as the cable is not broken. The speed rating of the cable may limit the file transfer speed.
    If you use Ethernet, you are making the connection using +File Sharing+ over the network.
    If you wait and use that FireWire adapter, you can use +File Sharing+, but it would be better to start the eMac using FireWire Target Disk Mode (as mentioned earlier), and mount the eMac's hard drive directly to the iMac's desktop. The eMac's hard drive will appear to be an external FireWire drive.

  • Can I transfer my itunes library from my ipod to my new imac?  If so how is it done?

    Can I transfer my itunes library from my ipod to my new imac?  If so how is it done?

    Welcome to the Apple Support Communities
    Of course. The best would be to transfer the iTunes library from your old Mac or PC to the new Mac, so you will keep everything and you won't have to use any third-party app.
    Anyway, if you don't have access to the old PC or Mac, you can transfer songs from the iPod to your Mac. If you purchased all the songs on the iTunes Store, just open iTunes, connect the iPod and transfer the songs. If you are using an iPod touch, you will lose everything if you sync it with iTunes on the new iMac.
    Another method is to use an app like Senuti to transfer the songs to iTunes, being a safer way to transfer them if you aren't sure that you will lose your songs

  • I would like to transfer my iTunes and photos etc from my PC to my new iMac via a external hard drive. Would somebody recommend one. I read that the Western Digital Mybook Essential 3.0 is good.

    I would like to transfer my iTunes and photos etc from my PC to my new iMac via a external hard drive. Would somebody recommend one. I read that the Western Digital Mybook Essential 3.0 is good. Though as Mac has 2.0 is this fast enough? I am a basic user, surfing only.

    If you plan on using the WD with the Mac after the iTunes transfer I would strongly recommend against WD. WD external HD's tend to be the most troublesome with Macs. If you intend to use the drive for backup using Time Machine or creating a bootable clone then I'd recommend a higher quality drive than WD. The drives I'd recommend in that case would be:
    OWC Mercury Elite Pro series
    LaCie d2 Quadra series
    G-Tech G-DRIVE series
    These are all high quality drives and enclosures with similar features. Personally I use the LaCie's however I would be happy to have OWC and G-Tech on my desk too. FWIW I've been using the LaCie's for 4 years and have 4 of them, all work perfectly and have never given me any trouble.
    You also my find this article helpful: Move an iTunes library from a PC to Mac (and back)

  • I have recently bought a imac and wish to transfer iphoto, imovie, and itunes files, albums, projects etc, from my macbook to my new imac desktop, to free up space on my macbook. How is this done?

    I have recently bought a imac and wish to transfer iphoto, imovie, and itunes files, albums, projects etc, from my macbook to my new imac desktop, to free up space on my macbook. How is this done?

    Hi,
    Are Both Macs running the same OS... i.e. Snow Leopard... ?
    Also These Links may be of Value:
    http://www.apple.com/support/imac/intel/
    http://web.me.com/pondini/AppleTips/SetupAsst.html
    http://support.apple.com/manuals/#imac
    Cheers,

Maybe you are looking for

  • "Printing: Error while printing" when I tries to Save - How?

    Since recently, whenever I tried to save a Pages document, Pages freezes for a few minutes, then show me a system message that says "Printing: Error while printing". I did not ask Pages to print anything! Please advice. Thank you very much.

  • Different Results with Powershel v2 and v3

    Hope someone can help me determine why there is a difference in my data between v2 and v3 of Powershell. I do my development on my laptop which has version 3 installed, but the script is executed on a server which has version 2 installed. #create dir

  • Compressor is crashing on startup every time. Im on 10.8.2. Here is the Report... Can anyone suggest what to do?

    Process:         Compressor [1787] Path:            /Applications/Compressor.app/Contents/MacOS/Compressor Identifier:      com.apple.Compressor Version:         4.0.5 (210813) Build Info:      Compressor-21081003010000000~1 App Item ID:     42439074

  • Date validations for fiscal year

    My selection screen has select option for date in that it shold take financial year i.e from april to march. suppose if date-low = dec2008 date-high = feb2008. how shld i write the code for this.validations etc. it should not give error saying lower

  • Delete line in query

    Hi! I'm not sure whether this issue fits here or not. Anyway, here it goes. Does anybody know how to delete (or not to show) a line in a query (SQ01) according to a condition. That is, how do I say to SAP, If this Cell is equal to zero.. Do not show