Upgrading report from CR8.5 to CR10 and connecting to new server

Post Author: jnicholsDME
CA Forum: Data Connectivity and SQL
We have numerous reports (50+) with various subreports that are used by our enterprise accounting system (MAS500). We recently upgraded to a new version of this program. The upgrade required that we upgrade the reports to CR10 from CR8.5 in order to render them in the program's runtime engine. All of these reports now live on a new server and are pointed to a SQL2005 db on that new server. I had to reset the datasource (we're using an ODBC connection) on all of the reports to point them at the new server and database. However, the SQL queries seem to still reference the old database (which was on the old server). The reports run fine inside of the accounting system, however, if we unplug the old server the reports take approimately 1 minute, compared to 3 seconds with the old server plugged in. Even editing the report in crystal, it takes approximately 1 minute to open the report in Crystal designer if the old server is unplugged (as opposed to 2 seconds with it plugged in). Despite setting the datasource it seems as if something in the report is still trying to resolve itself to the old server. Another strange thing is that even when the old server is turned on, the sql database the reports previously referenced is OFFLINE. Despite reset the datasource, when attempting to verify the database the reports bring up a dialog saying a table from the old database can't be found, and this reference is still visible in the SQL query inside of crystal. Unfortunately, I can't edit this query, or I'd probably be able to resolve my issues. Any ideas? Rewriting these reports would take weeks.

Post Author: ejthunder
CA Forum: Upgrading and Licensing
Hello,
What edition of Crystal Reports 10 do you have? You have to have CR 10 Developer or Advanced Developer. CR 10 Professional and CR 10 Standard are not development level products and do not install development components into VB6.
Open CR 10 and go to Help > About. What is the edition description at the top? If it doesn't say CR10 Developer or Advanced Developer you have your reason.
I hope this helps!
EJ

Similar Messages

3rd node is taking 15% of CPU without any load and connection on the server

Hi,
I am struggling to resolve the 3rd node is taking 15% of CPU without any load and connection on the server. but not find clues for this. Please give me some inputs.
The issue is:
We have 8 databases on our 3node RAC (11.2.0.1). One of the performance team guy reported that 3rd node is taking 15%cpu utilization when there is no load and connection to the database and at that time the other 2 node are taking only 1%cpu. even i have checked it by using top command and it is almost given same results.
To come out of this issue, i have two solution in my mind, but i am not sure whether this approach is good or bad. the plans are
(1). shutdown the databases and check the cpu usage. --to findout is there any thing wrong with Kernel parameters or at system level.
(2). Shutdown the databases and CRS on the 3rd node and reboot the server.
If above process is correct then i need to take permission from my manager.
I am total stuck, what i need to do. Is there any other approach to resolve this issue. Please help me, this is very critical issue for me.
Also i have checked from GV$SESSION for the active session, but i didn't find any connection apart from oracle processes.
Thanks in advance.

Thank you Guzma for your suggestion,
When i checked the gv$session for the active sessions from only 2databases, Do i need to check in all the databases and make sure there are no active session and try for the 1st solution.
-more over i have observed that one of the oracle process is taking 99% of the 15%cpu when i checked from top command. i have tried to find out the what the session is from below, but it given no results from the 2of the DB's.
top - 13:43:27 up 28 days, 2:44, 1 user, load average: 8.62, 7.90, 6.46
Tasks: 1275 total, 11 running, 1264 sleeping, 0 stopped, 0 zombie
Cpu(s): 37.3%us, 6.9%sy, 0.0%ni, 44.3%id, 3.9%wa, 0.2%hi, 7.4%si, 0.0%st
Mem: 32830792k total, 32440660k used, 390132k free, 2888k buffers
Swap: 32764556k total, 9553692k used, 23210864k free, 20920068k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
17870 oracle 25 0 4254m 111m 102m R 94.6 0.3 35345:34 oracle
8332 oracle 15 0 9151m 676m 639m R 27.9 2.1 2:03.00 oracle
18062 oracle -2 0 9151m 4.5g 4.5g S 13.5 14.5 3049:49 oracle
18058 oracle -2 0 9151m 4.5g 4.5g S 12.8 14.5 2948:39 oracle
SQL>select p.spid,s.sid,s.serial#,s.username,s.status,s.last_call_et,p.program,p.terminal,logon_time,module,s.osuser
from gV$process p,gV$session s where s.paddr = p.addr and p.spid=17870 ; 2
no rows selected.
in database level, will some of the session or processes hangups fro some reason?
thanks,
Hari

What is involved in removing an image from a PDF document and inserting a new one?

Our form producing process is very typical:
(1) Start with a TIFF image, create a fresh PDF document.
(2) By adding items such as links and interactive fields, convert the read-only document into an interactive form.
Step (2) may take a lot of work, but fortunately when modifications are needed, it is always possible to edit the individual items. No need to redo the whole form from scratch.
There are some cases, however, in which we have invested a substantial amount of work in Step (2), but we need to modify the underlying image, removing it and replacing it with a new one. We obviously don't want to destroy all the work done in (2).
I envision the procedure as taking a rug from underneath a person and putting a new one.
What is involved in doing that? Can that be done at the JavaScript level? Are there commercial packages that can do that? Is the Acrobart SDK required?
-Ramon

Document->Replace Pages
Been in Acrobat since at least version 5.

HT5622 How can I remove one phone from my apple id and create a new apple id for that phone

How can I remove just one phone from my apple id and create a new apple id for just that phone

Follow the Checklist here
What to do before selling or giving away your iPhone, iPad, or iPod touch
Then set up the Phone as New using the preferred Apple ID.
Create one at My Apple ID

HT1766 I recently replaced my iphone and took 6 weeks of new pictures, I plugged it to my computer and by accident I restored the back from 4 months ago and erased my new pictures. How can I recover the new pictures ?? Help!!

I recently replaced my iphone and took 6 weeks of new pictures, I plugged it to my computer and by accident I restored the back from 4 months ago and erased my new pictures. How can I recover the new pictures ?? Help!!

Sorry those pics might be gone, since you restored from your backup.
Only way possible if by some possibility you were able to backup your current data to itunes, then you can restore from that backup.
Open itunes - edit - preference - devices - backup - see if there is an up to date backup.
If you don't have one then sorry those pics are gone.

R12 Upgrade Report from 11i Getting Error

Hi everyone,
We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
Current system time is 06-DEC-2011 15:52:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='JRG120111b'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 06-DEC-2011 15:52:06
---------------------------------------------------------------------------

It looks as though its failing in your beforereport trigger.
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
BEGIN
MO_GLOBAL.INIT ('SQLAP');
MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
END;

Creating a report from scratch in java and getting invalidfield error

hello
I am trying to generate a report java.
I am getting invalidfieldobject - the field was not found
I checked the resultset and it does contain the column called trn
package com.surecomp;
import java.io.ByteArrayInputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.OutputStream;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.DBField;
import com.crystaldecisions.sdk.occa.report.data.FieldValueType;
import com.crystaldecisions.sdk.occa.report.definition.FieldObject;
import com.crystaldecisions.sdk.occa.report.definition.ISection;
import com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
public class reporting {
     public static void main(String[] args) {
          reporting x = new reporting();
          x.run();
     public void run() {
          try {
               java.sql.ResultSet javaResultSet = null;
               Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
               java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:sqlserver://ssi-allmatch:1433;databaseName=mrmdus33xxx;","sa", "sa12");
               java.sql.Statement statement = connection.createStatement();
               javaResultSet = statement.executeQuery("select * from trades");
               ReportClientDocument boReportClientDocument = new ReportClientDocument();
               boReportClientDocument.newDocument();
               boReportClientDocument.getDatabaseController().addDataSource(javaResultSet);
               ISection boSectionToAddTo = boReportClientDocument.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0);
               // Create a new Database Field Object
               DBField boDBField = new DBField();
               boDBField.setName("trades.trn");
               boDBField.setHeadingText("trn");
               boDBField.setType(FieldValueType.stringField);
               FieldObject boFieldObject = new FieldObject();
               boFieldObject.setDataSourceName(boDBField.getFormulaForm());
               boFieldObject.setFieldValueType(boDBField.getType());
               boFieldObject.setLeft(9000);
               boFieldObject.setTop(1);
               boFieldObject.setWidth(1911);
               boFieldObject.setHeight(226);
               boReportClientDocument.getReportDefController().getReportObjectController().add(boFieldObject, boSectionToAddTo, -1);
               ByteArrayInputStream byteArrayInputStream = null;
               byteArrayInputStream = (ByteArrayInputStream) boReportClientDocument.getPrintOutputController().export(ReportExportFormat.PDF);
               writeFileFromInputStream("c:/bob.pdf",byteArrayInputStream);
          catch(ReportSDKException ex) {
               System.out.println(ex);
          catch(Exception ex) {
               System.out.println(ex);
    private void writeFileFromInputStream(String sfile, ByteArrayInputStream inputStream) {
         try {
              File file = new File(sfile);
              OutputStream outputStream = new FileOutputStream(file);
              int bytesRead = 0;
              byte [] buffer = new byte[32768];
              while ((bytesRead = inputStream.read(buffer, 0, 32768)) != -1) {
                        outputStream.write(buffer, 0, bytesRead);
              outputStream.close();
              inputStream.close();
         } catch (Throwable th) {

Hi,
I have the same problem, did you get this resolved? I am new to the Crystal Report Java SDK and want to create reports from scratch but I can't find any good resources on the internet or the website.

Run Crystal Report from URL includes username and password

Hello,
I've downloaded CR 2008, and CR Server 2008 demo's.
I'm trying to use a feature I've used with CR10 enterprise, and XI report server, where I can run a report direct from the URL.
Something like:
HTTP://scada-ho/crystal/enterprise/admin/en/viewrpt.cwr?id=381&init=actx&apsuser=administrator&apspassword=&apsauthtype=secenterprise
or
http://192.168.72.98/businessobjects/enterprise115/infoview/main.aspx?id=1024&init=actx&apssystem=hobprim&apsuser=visy&apspassword=Fillers3&apsauthtype=secenterprise
I've noticed that there were subtle syntax differences between CR10 Enterprise and XI report server in the past, and expect that similar differences exist with CR server 2008.
Could someone show me the syntax for CR Server 2008 to run a report from a URL, and pass the required username and password, without having to go through the infoview logon screen

Tim,
Thanks for the reply. I admit I did see that thread when I was looking for a solution.
My hesitance is that for a non programmer it looks very difficult, and a lot of settings.
I liked the URL reporting because of its simplicity - one line.
I know that it advertises the username and password, but for our requirement (intranet reporting, LAN separated from IT), its not a big risk.
My further investigations indicate that for CRS 2008 something like the following should work:
http://192.168.207.156/CrystalReports/view.aspx?id=1102&apsuser=administrator&apspassword=admin1&apsauthtype=secEnterprise&init=java
However I get
404 - File or Directory not found.
I'm running on Windows7 with IIS7, so I think it must be an IIS configuration issue
Any Ideas?

Create a report from scratch, add Table and Datasource Problem

Hi,
I'm using the latest Crystal Reports Runtime supplied for eclipse.
I want to create a report from scratch, add a Table and then add a ArrayList of Pojos as the Datasource.
But unfortunately depending on the ConnectionInfo I supply to the Table I get different errors.
I looked through the samples and see that I have to supply properties
like
"Database DLL", "crdb_javabeans.dll" and ConnectionInfo.setUserName("");
     ConnectionInfo.setPassword(null)
I looked through the forums and find different set of properties.
Actually because I am just working with Pojos I would have thougth that something like the following
would be sufficient:
ReportClientDocument doc = new ReportClientDocument();
            doc.setReportAppServer(ReportClientDocument.inprocConnectionString);
            doc.newDocument();
Table table = new Table();
table.setAlias("reportTable");
table.setName("reportTable");
doc.getDatabaseController().addTable(oTable, null);
doc.getDatabaseController().setDataSource(myCoolection, myClass, "reportTable", "reportTable");
So could someone tell me the right/minimum Set of Properties to make a Table get connected to Pojos?
Edited by: jack mann on Aug 31, 2010 3:25 PM

With XI Release 2, you can come quite close to creating from scratch:
http://technicalsupport.businessobjects.com/KanisaSupportSite
/search.do?cmd=displayKC&docType=kc&externalId=5074668
You need Service Pack 2:
http://support.businessobjects.com/downloads
/service_packs/crystal_reports_en.asp
Sincerely,
Ted Ueda

Upgrade path from Unity / Exchange to Unity Connection 7.1

Has anyone found (perhaps doesn't exist) an upgrade path from Unity / Exchange 4.1 to Unity Connection 7.1?

It will likely require a new server, but I just performed this migration. You also have to be on Unity 4.0(5) or higher in order to perform the migration. You use the COBRAS Export tool for Unity to grab the majority of system data and the COBRAS Import tool for Connection to migrate data over. Read up on COBRAS here:
http://www.ciscounitytools.com/Applications/General/COBRAS/COBRAS.html
If you have other questions, let me know.
Hailey
Please rate helpful posts!

Creating a Single Report from Oracle Data Base and BI Answers

Hi,
I wanted to create a single report by using a BI Report where in we have project and Activity columns,now I want to add column with Program to see the results.Program data is in Oracle Database.
Can some one help me how to create the report.
ii.How to edit a pivot table in BI word designer.What I am doing present is creating every time a new report.
Thx In Adv.
From Sravan

Hi Pivot table was a general question.Is is nothing to do with the qus 1.
See I have a report which have a programme and Activity.So I need to get the data of Prject from Data base how to do this in BIP.....I am not using any pivot table here.

I upgrade firefox from 7 to 8 and now when i start firefox everytime it opens "getting start with firefox" page, in options i select the option 'show a blank page" how can i resolve this issue?

i upgrade firefox from version 7 to version 8, now when i start firefox everytime it open self the "getting start with firefox" website, in the options on firefox i select the 'show a blank page' but its not working. i am using firefox on windows XP- SP2.

Try restarting Firefox, the one time page(s) after starting a new release should disappear. Actually this last time with 8.0 they did not come up for me.
If that doesn't work then bring up '''about:config''' and place the url of the page into the filter. Right-click on anything that comes up and use "Reset".

Upgraded Online from CS to PS4 and PS4 Keeps CRASHING

Well I decided against better judgement to "upgrade" from CS as the RAW plugins did not support one of my cameras. (5D)
Well now after I downloaded the PS4 Upgrade install, everytime I go to work on an image, PS4 just up and closes. No messages at all.
Also as an upgrade, I now have both CS AND PS4 on my machine. Is that correct??
Tried phone help 2 seperate times but after 2 hours i gave up.
Please help with any suggestions.

Appreciate the info. Good to know that CS and CS4 together are OK. I do wish there were clear instructions to download. (Instead of having to "search" all over for help. All good.
PS4 still crashing and dumping my work but I found that as long as I keep my image edits down to 4 or 5, I shut down PS4 and then restart it again each time. Seems to work Ok that way. Image files are around 12 to 25 mb so maybe on the edge of it's capabilitys.
Although CS ran like a champ, PS4 seems to be a nice system if I can wok out all the bugs.
(I sure I hope I can in the next 30 days... Otherwise I will be returning PS4 and will figure out another way to pull down RAW files from a Canon 5D)
Great Forum and will use again.

HP 8500 Printer and Connection to eprint server

Refurbished Printer: HP Officejet Pro 8500 Premium A910 n (Changes status from new to refurbished 02-17-2011)
ISP: ATT DSL
Modem/Router: 2wire new from Best Buy. It is white with ATT logo on it. Is using latest firmware.
Network: ethernet
The printer downloaded and installed a firmware update after initialization. So it is connected to the internet.
It then tried to register to the eprint server and said it cannot connect to eprint server.
The printer functions normally in every way except it will not register to eprint server.
Numerous calls and hours with HP Support rebooting, resetting and everything else under the sun have done nothing.
I tried setting IP and DSN addresses per all the suggestions in these forums and nothing works.
Could there be an issue with the HP Sever? Does it really exist? Are there compatibility issues with 2wire router.
ATT did remote session on my computer and could find nothing they could do. They were able to plot a test page remotely.
Any suggestions or help would be greatly appreciated. Thanks.
NEW INFORMATION (02-11-2011):
I noticed today while looking at the EWS that the printer SSID is not the same as the router, but it was grayed out. Does this matter for ethernet? If so how do I change it? I do not think this matters for ethernet.
NEW INFORMATION (02-12-2011):
The support team at 2wire have given me procedure to completely open all in and out traffice to the printer. They said if this does not work then the problem is with the eprint server. I will try this on Monday, but I expect there is a communication problem between the printer and the eprint server that has nothing to with anything at my location or my ISP. Is there any way to check the server this printer is trying to connect to? Where is it? Is it operational? If not, is it rerouting properly to an operational server? The printer must be trying to access a particlar IP address or DNS to establish communication.
NEW INFORMATION (02-14-2011):
Per the instructions from 2wire support team I opened all ports and allowed all services then turned the printer off and on. It did not work. The printer will not connect to the HP eprint server. So the problem is with the HP eprint server. This printer is programmed to look somewhere for a server to connect to. Where is it? Is it operational? Why will not allow a connection? HP the ball is in your court. What can we do?
I have ATT DSL at work and Charter Cable service at home. The problem is the same for both locations and ISP's. Is there anyone out there has connected that has ATT DSL or Charter Cable? If so what are your settings?
NEW COMMENT (02-15-2011)
Can anyone at HP tell me why the printer will connect to the HP Server and download the firmware update, but will not connect to the HP Server to register to eprint? It all seems to be on HP's side. When will we get a fix?
NEW COMMENT (02-16-2011)
The model number is blank in the engineering menu and the printer diagnositc page. If this is an issue can it be added with a firmware update? Do I need to get money back for this one and buy a fully configure one in a local store? Maybe the blank model number is throwing all the other information out of place that is being sent to the server. Can the server be updated to accept blank model numbers?
POSSIBLE SOURCE OF PROBLEM - SOLUTION PENDING (02-16-2011)
I JUST LOOKED ON THE BACK OF MY PRINTER. IT HAS A REMANUFACTURED STICKER ON IT.
It appears that the missing model number on the remanufacturered units is the reason why it will not connect to the eprint server. Print out the printer diagnostic page and see if the model number is blank.
HP is working on a fix.
SOLUTION- (02-22-2011)
I UPGRADED MY ORDER FROM REFURBISHED TO NEW REPLACEMENT. THE NEW REPLACEMENT CONNECTED THE FIRST TIME TO EMPRINT SERVER - NO PROBLEMS. I HAD TO PAY FOR A NEW ONE AND THEY WILL CREDIT MY CARD WHEN THEY GET THE REFURBISHED ONE BACK.
LESSON LEARNED - IF YOU HAVE PRINTER WITH BLANK MODEL NUMBER YOU WILL NOT ABLE TO CONNECT TO EPRINT NO MATTER WHAT YOU DO!
Thanks if anyone can help.
This question was solved.
View Solution.

Try setting a fixed IP/DNS…hopefully you haven’t tried that yet. (The problem is most likely w/how therouter and the printer are communicating…setting the fixed IP/Manua DNS should fix it. )          If previous steps didn’t help, you may need to set a fixed IP address/DNS Server on your printer.
Setting a fixed IP address/DNS Server for your printer may resolve web services connectivity issues that can occur on some networks with some routers. Note: This may be particularly helpful with networks using DSL/VIOS routers.
Please read the entire set of instructions through completely before trying them. You should not attempt these on your own if you don't understand networking basics. Most of us have a "techie" buddy/friend/family member...if you're not comfortable this might be a good time to call him/her, or contact HP support.
Before you begin, we recommend you first remove Web Services from your printer. (See the previous section for where to find this on your printer.) Removing web services will remove your printer from your HPePrintCenter.com account (if you have previously set up an account and added it). When you re-enable web services after completing these steps you will have a new ePrint email address and need to add your printer to your ePC account again.
Setting a manual IP address/DNS Server on your web-connected printer:
Print a Network Configuration Page from the printer front panel. On some printers this will be under Wireless>Wireless Settings, and on other models use the “Print Report” option from the Wireless status screen accessed from the wireless icon on the printer home screen.   Note the printer's IP address that is listed in the IPv4 section of the report. On most printers you can also see the printer’s IP address from the Wireless menu, or on the Wireless status screen.
Type that IP address into your browser address bar (where you would normally type a web page URL) and hit enter - this will load the printer's internal settings page (also known as an Embedded Web Server, or EWS)
Select the “Network” or “Networking” tab (the label varies depending on printer model) from the tabs along the top of the screen in the EWS
Depending on your printer model, the next step(s) will vary:
Select the “IPv4” option from along the left side of the Networking screen
or
Select the “Networking” option from the left side of the screen
Then select the “Network Address (IP)” option from the left side of the screen
The screen you end up on should be the “IP Address Configuration” screen. That screen allows you to choose an Automatic or Manual (i.e., fixed) IP address for your printer, as well as Subnet Mask and Default Gateway values. You will use this screen to set a Manual IP address for your printer.
To continue:
Select the radio button next to “Manual IP”
Select the “Suggest a Manual IP Address” option below the IP address fields. The Manual IP address fields will automatically populate with suggested values.
Select the “Manual DNS Server” radio button in the DNS Address Configuration section
Enter the address just entered in the “Manual Default Gateway” into the “Manual Preferred DNS Server” field. Leave the “Manual Alternate DNS Server” entry blank.
Carefully double-check the values you entered to make sure they are all correct.
Click 'Apply'
Save any open documents and close any web browsers on any computers
Turn off the printer and unplug the router.
Plug in the router, wait for it to start up and for status lights to settle down (approximately a minute at least), then turn on the printer.
If you removed web services from your printer before starting this process, after the printer has connected to your network, re-enable web services on your device and add your printer to your account on HPePrintCenter.
If you did not remove web services before setting a manual IP address and are still having connection issues, remove and re-add web services.
In some cases you might need to add the printer to your computer’s Printer/My Printers folder again, after you set the new fixed IP address.   If you have problems printing to your printer, simply use the option to add a printer, select the Networked printer type, and complete the add printer wizard. You will not need to reinstall any printer software on your computer.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Run report from EBS with Discoverer running on a separate server

Hi.
Usually, when I define a report as a form function, it can be accessed using an URL.
In my current project, Discoverer (10g) is running on a separate application server (but using the same database). Is there any way of specifying a function in E-Business Suite to open a report from an external server?

Actually, the URL is to a form function, which in turn will open the report. This URL is just pasted into a jsp in iStore.
If there's another and maybe better solution, I'd really like to know.
I think the ideal solution would be a jsp querying the database and displaying all Discoverer reports assigned to a specific responsibility, then linking directly to the report in viewer, but I don't think this is doable without extensive work.

Upgrading report from CR8.5 to CR10 and connecting to new server

Similar Messages

Maybe you are looking for