Upgrading sap business one version 800232 is not allowed

Hi All
I got this error when I tried to run an upgrade from SBO 2007A PL 42 to SBO 8.8 PL3.
Any suggestions.
Regards
Bongani

Dear Bongani,
i found something for this Error i hope it help:
Zusammenfassung
Symptom
In the connection setting step or database selection step, the following error dialog appears: "Upgrade SAP Business One from version xxx is not allowed. Contact your SAP business partner for support."
Other terms
Upgrade Wizard, Upgrade Path, Restriction
Reason and Prerequisites
Application error
Due to the nature of development cycles, it takes some time for SAP Business One 8.8 to merge bug fixes from latest released install base patches. As a result, some upgrade paths are restricted in order to avoid data loss/duplicate upgrade in certain cases. For example: a bug fix is applied on 2007 A SP01 PL07 and merged with 8.8 PL05. If the database in 2007 A SP01 PL07 is upgraded to 8.8 PL04, the fix will be lost. In addition, there is a risk of data loss if the fix involves some metadata change. So 2007 A SP01 PL07 can only be merged with version 8.8 PL05 and higher.
Solution
SAP intends to provide a patch or patches in order to solve the problem described.
The section Reference to Related Notes below will list the specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
Please note that these references can only be set at patch release date.
SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
In addition to the bug fixes listed in this SAP Note, this patch contains also the bug fixes from:
SAP Business One 2007 A SP01 PL06,
SAP Business One 2007 B SP00 PL14.
For more details, please see the SAP Notes under the "Related Notes" tab.
IMPORTANT: Please note that if you are on a higher patch than the 2007A/2007B patch levels listed above and upgrades to 8.8, this may result in unexpected issues and potential data loss as the upgrade path is not supported yet.
Best regards,
Indira

Similar Messages

Can i upgrade SAP business One version 8.6 to 9.1

Hi Expert,
Can i upgrade SAP business One version 8.6 to 9.1 directly.please assist me.
Regards,
Mizan

Hi,
There is no 8.6 version for SAP B1. Please advice correct version with PL.
Thanks.

Unable to open 2007B database in SAP Business One version 8.8

Hi Experts,
We are in the process of upgrading one of our client from SAP Business one 2007B PL13 to SAP Business One 8.8. While trying to open the client's live database in 8.8, system throws a message "You cannot upgrade company databases from SAP Business One client. Use the Upgrade CD or contact your IT administrator for the upgrade". Plz guide me on how can I open the DBs used in 2007B in 8.8??
Regards,
Madhavan

Hi
I thiink your database is not updated ..Install client in your server and try with opening up ..
It will probably ask you to back up the database and upgrade ...
If not ,uninstall everything thing ..instead of having new installation ,download the upgrade version and see if resolves your issue
Hope this helps
Bishal

Upgrading SAP from one version to other

Hi
I would like to know the various procedure for SAP updgrade project and the technical (ABAP) work involved in it and when it will come to picture while upgradation

hi
good
in care of a upgradation you have to follow the following procedure as a vendor.
1-SAP Release documents for the particular documents
2-Availability of the proper Functional Spec
3-Availability of the proper Technical Spec
4-Servers those have been properly upgrade with the required version of SAP.
Thanks
mrutyun^

Upgrade Error Failed to upgrade SAP Business One Client

Hi All,
I have upgraded one of our customers from SAP 9.0 to 9.1 PL5.
Everything upgraded successfully through the wizard. When launching the client, the 32 bit client upgraded with no errors. When attempting to open the 64 bit client I get the error above. I have also uninstalled the 64 bit client and re installed from the B1-Shr folder with the same result.
This is a 64 bit Windows Server 2008 R2 machine. Log files are not showing any errors.
Has anyone never ran into this?
Sincerely,
Chris Sorensen

Chris
I just had this happen with PL06.
It gave me this message for both 32 bit and 64 bit client
When I checked - even though it said it had not upgraded the 32 bit client it already had.
With the 64 bit client I had to 100% reboot and go directly to the client upgrade and then it worked.
You might try that. Seems like something was interfering with it.

SAP Business One version comparison

Hi, we're currently using 2005, and we're considering an upgrade to 8.8 later on. When researching the compatibility/benefit issues, I can't find anything that compares 8.8 to 2005 (all I can find are 8.8 to 2007). So I tried to find the comparison between 2005 and 2007 but can't find anything as well.
Can anybody help me on this? Please advise me on what's the difference between 2005 and 2007? (what's the compatibility issues, performance gain, new features, etc).
Thanks.

If you have addon's running on 2005 then for 2007 you will need to recompile them with the UI and DI API dll files from 2007 SDK. This would be your first step for the addon to even work in 2007.
I would recommend update your current company db by installing 2007 on a test environment and try the above steps for your addon.
Suda

SAP Business One Speed problem

Hello All
We are using a SAP B1 2007 PL12 and facing a very big problem of performance or Speed currently our database size is more than 50gb and now our consultant recommend us to upgrade 2007 to 8.8. can this upgrade resolve our problem or not?

Dear,
Check : upgrading sap business one version 800232 is not allowed
This may give you helpful information.
Regards,
Syed Hussain.

SAP Upgrade wizard crashes on upgrading users SAP Business One 8.82 PL12 to 9.0 PL5

Dear Forum,
Good Evening!
I have an issue while upgrading, present we are using SAP Business One 8.82 PL12. We would like to upgrade SAP Business One 9.0 PL 5 as per SAP Overview note SAP Business One 9.0 PL5.
At the time of upgrading Users
System Automatically crashed.
Further does not upgrade.
Please give your suggestion.

Hi Manivannan,
Please check below link.
SAP B1 8.82 to SAP 9.0 PL3 Data Upgrade Error
Hope help
Regards::::
Atul Chakraborty

Crystal Server with SAP Business One Crystal

Hi,
We have installed Crystal Reports Server 2008 on a server which already had Crystal Reports 2008 (12.1.0.892) (Fix pack 3, SAP Business One version) installed, as well as SAP Business One 8.8.
This is the first time we have dealt with the CR Server application.
The CCM & the CMC are running fine as are all the services.
When running CR 2008 and choosing Save As: Enterprise, the error message "No authentication plugins are installed" appears.
The Business View manager pops up a log on box and no authentication methods appear in the drop down box.
Is it possible the SAP install has corrupted the Crystal Server install, as the authentication plug in dll's do appear to be missing from the server.
The same issue arises when istalling the client tools on a client which has the same designer version installed, but not on a client which has on older version installed.

Resolved by uninstalling everything Crystal related, deleting the Business Objects folers, then reinstalling starting with Crystal Server.
The install of the B1 specific versions must not contain some necessary files, which are then not installed by the other products

Crystal report for sap business one problem

Hi experts,
I am facing problem while dealing with crystal report 2011.
I installed sap b1 8.8 pl 10, then upgraded to pl 20. Now again upgraded to 9.0 pl08. Then i installed SAP Crystal Report for SAP Business One 2011.
I seems that it is not integrated to SAP Business One, because i am not able to save my crystal layouts in sap business one.
How can i resolve this issue, please let me know if anyone faced same kind of problem and got solution for that.
Thanks

Hi
1758302 - Error while connecting to Crystal
1397692 - Error when starting Crystal Reports software
Thanks
Mohammad Imran

Running SAP Business One on a 64-bit server

One of our clients wants to upgrade their server to a 64-bit server running Windows Server 2008.
What are the implications of this and do we also need to then use Microsoft SQL Server 2008?
I went to this web link: https://websmp103.sap-ag.de/smb/sbo/platforms and found some info, but the questions I still have is the following:
1. If we upgrade to SQL 2008, do we have to buy licenses or can we also just get an installation from SAP with our software (if we've gone live over 2 years ago already on SQL 2000, then upgraded to SQL 2005).
2. Can we still stay on SQL 2005 or is it better to use SQL 2008 and what is the implications?
I found the following on the link posted above:
Mar 11: SAP Business One 2007 now supports Microsoft® SQL Server 2008.
Microsoft SQL Server 2008 is now fully supported by SAP Business One 2007 A (as of patch 47) and SAP Business One 2007 B (as of patch 10), including SAP-developed add-ons.
Jan 21: SAP Business One 2007 now supports Microsoft® Windows Server 2008.
Microsoft Windows Server 2008 is now fully supported by SAP Business One 2007 A (as of patch 46) and SAP Business One 2007 B (as of patch 09), including SAP-developed add-ons. 64-bit and WTS support are still pending and will be announced when available.
What exactly does the bold part mean?
Any tips/hints on making this decision will be greatly appreciated!
Thanks,
Adele

Hi Adele,
"64-bit and WTS support are still pending and will be announced when available" means that Windows 2008 64bit has not been tested working with SAP Business One yet. Thus not supported (yet).
Same applies to W indows T erminal S erver 32bit and 64bit.
>
Adele le Roux wrote:
> 1. If we upgrade to SQL 2008, do we have to buy licenses or can we also just get an installation from SAP with our software (if we've gone live over 2 years ago already on SQL 2000, then upgraded to SQL 2005
I am not sure if procedure as described in note [928839|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=928839] will apply. In order to get excact clarification I have asked the owner of the note to update it reagarding MSSQL 2008 licenses.
>
Adele le Roux wrote:
> 2. Can we still stay on SQL 2005 or is it better to use SQL 2008 and what is the implications?.
Yes, you can still stay on MSSQL 2005 and upgrade later to MSSQL 2008. The other way around will not work. MSSQL 2008 is currently supported only as of SAP Business One 2007 A PL47 or SAP Business One 2007 B PL10. Refer to [http://service.sap.com/smb/sbo/platforms|http://service.sap.com/smb/sbo/platforms].
Regards
Mario

Installation of SAP Business One client and required administration rights

Dear community,
I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
The pain points I have heard so far are the following:
- The installation of SAP Business One client and its patches has to be started by a user with administrator rights. As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
- End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator. This is time consuming (and therefore costly) activity.
We are considering to design a new solution which would overcome the above limitations.
I would like to confirm with you if my understanding is correct:
Question 1:
Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
If yes, how do you resolve this currently?
Question 2:
Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
Question 3:
If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
Thank you
Best regards
Jan Ruzarovsky
SAP Business One Product Management

Dear all,
Thank you very much for your comments, very helpful!
@Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
We are currently considering several possible designs. One of them is as follows:
1. A new SAP Business One Updater Service will be installed on each client workstation.
It will be a windows service installed and running under a local system account.
2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
The service would be able to install patches even if nobody is logged in.
Questions:
If we consider the above design, there are a few open topics:
1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
- Does this have any impact on your tools, processes or add-ons?
2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
- Can you configure such a shared directory?
From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
1. Manually initiated upgrade of the client
Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
2. Automatic update:
- Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
- If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
Question: Which of the above two scenarios would you and your customers prefer?
If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
Best regards
Jan
Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

Error While Starting XL Reporter Addon on SAP Business One Server

Hi Everyone,
I have got the following error message while starting XL Reporter Addon on SAP Business One Server:-
1. "Unable to Connect SAP Business One, Connection string is not valid [66000-84]. The user is not licensed."
2. "Addon does not have a License"
while license is installed on this machine.

Hi,
Try these below steps:
In Business One from the main menu go to Administration -> License -> License Administration.
Select the user you wish to connect to the XL reporter.
Assign the user the SAP AddOn License.
JimM

SAP Business One iPhone App konfigurieren...

Hallo zusammen,
Seit heute gibt es ja eine SAP-eigene iPhone-App.
Link zum APPSTORE
Dort findet man auch einen Link zur Info-Seite von SAP auf der steht:
You need to be running SAP Business One version 8.8 with a professional user license. Before you start using the app, make sure your SAP partner configures the mobility settings in SAP Business One.
Mehr aber leider nicht.
Weiß irgendjemand, wie man die Einstellung im Business One vornimmt?
Bin für jede Information dankbar!
LG Basti

Hallo zusammen,
mir ist es soeben gelungen mit meinem iPhone eine Verbindung (zumindest im Wlan-Netz )herzustellen.
Hoffe das klappt bei euch genauso.
Ich habe folgendes gemacht:
1. Beim Benutzer den Haken bei "Mobile-Benutzer" gesetzt
2. Dann die Mobilfunknummer eingetragen
3. Dann die UUID vom iPhone eingetragen (die ewig lange Nummer)
4. Dann dem Benutzer eine B1i-Lizenz zugewiesen
5. Auf dem iPhone in den Einstellungen eingetragen:
Server: <IP-Adresse>:8080 (dort musss die B1i installiert sein und laufen)
SSL hab ich ausgemacht, da deswegen eine Fehlermeldung beim Verbinden kam
Benutzercode: Benutzer aus SAP wo ich meine Mobilnummern und UUID eingetragen habe
Mobiltelefon: meine Mobilnummer
Fertig.
Dauert beim Verbinden eventuell eine gewisse Zeit aber dann funktioniert es super.
Gruß
Jacqueline

Not able to get Form 16 A (SAP Business One 8.8 Version)

Hi all,
I am not able to get Form 16 A, after giving necessary information in Form 16 A Selection criteria screen (after posting Outgoing payment for vendor and Govt authority), then system opens another window u201CForm 16 A reportu201D and clicked u201Cgenerate certificate nou201D , but not able to view form 16A.
system is throwing a message "No certificate number marked to any invoice included in this form",
where to mark the certificate number in the invioice?
In BP master under accounting , tax subtab, for Subject to withholding tas there we have a feild for certificate no, update this feild also the same system mesaage is popping up
Is there any other process to view?
Am working on SAP Business One 8.8 (8.80.229) SP: 00 PL: 10
Can anyone help how to get Form 16 A
Thanks
Kumar
Edited by: kumar on Jun 29, 2010 1:11 PM
Edited by: kumar on Jun 29, 2010 1:12 PM

Hello Dear,
After posting outgoing payment and payment of TDS on TDS account,Update the challan entries.
You can get the update challan entries form under Financial --CXS-TDS.
After that open the Form 16 A form you will get the report.
Thanks,
neetu

Upgrading sap business one version 800232 is not allowed

Similar Messages

Maybe you are looking for