Upgrading SAP BW from version 7.0 to 7.4

Hello Everyone,
We are going to upgrade the BW system from version 7.0 to 7.4. My question is that, we have 3.5 flow as well in our system, so would it cause any issue while upgrading or we should do the migration of 3.5 flow to 7.0 first and then we should go for upgrade. Does 7.4 supports 3.5 flow? Please suggest.

SAP BW 7.4 supports 3.5 flows and i guess upcoming version will also supports 3.5 flow.
The 3.5 flow will not create any issues during SAP BW upgrade.The migration of 3.5 to 7.0 is also not mandatory.The Application upgrade is taken care by SUM tool.It will not differentiate any flows (3.5/7.0). It will upgrade all BW objects to 7.4 versions.

Similar Messages

Does anybody know benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?

An upgrade of ERP SAP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10 is being planned in the company I work for. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?
Regards, Alejandro

Hi _Miguel
I am going from ECC 6.0 to ECC 6.06. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version 6.0 to 6.06
regards, Alejandro

Upgrading sap programs from one version to another version

Hi All,
I want to know how to upgrade sap programs from one version to another version,Please help me...
Regards,
Raj.

The seriousness and the complexity of the upgrade is primarily dependent on the version of the older SAP system. The Upgrade from 4.6 -> 4.7 is relatively easier and faster than that of an upgrade from 3.0 -> 4.7.
Most of the function modules in the older system have been reworked and would be marked as obsolete in the target version. (This could be seen in EPC Error Analysis & warnings).For example Function modules like Upload, Download, WS_Download, WS_Upload,WS_File_Delete, WS_Filename_get, Popup_to_confirm_step etc. These obsolete Fm's can be easily replaced with Fm's like Gui_Upload,Gui_Download, etc. There are few other complex Fms for which you have to do through R&D to find out the replacements.
Apart from replacing obsolete Fms one has to correct those syntax errors that may occur in the target version. There is a lot of variations in Syntax standards across versions.
Further more many transactions would have been reworked. Some Fields would be missing in the old system or a field would have been made a Key-Field in the new version , some screens would be missing or would have been addded. Also some Tables would have been flagged as obsolete and we need to find replacement for those obsolete Database tables.
It would be wise to do a R&D for all the programs in the system before Upgradation. This would really give us an idea about the complexity of the task and we can plan our Upgrade work effectively.
regards,
cartik

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Can i upgrade SAP business One version 8.6 to 9.1

Hi Expert,
Can i upgrade SAP business One version 8.6 to 9.1 directly.please assist me.
Regards,
Mizan

Hi,
There is no 8.6 version for SAP B1. Please advice correct version with PL.
Thanks.

I have upgraded Acrobat Standard from version 8 through time until I am currently using version X, which doesn't work with Office 2013. Can I upgrade to version Standard XI?

Over the years I have upgraded Acrobat Standard from version 8 to currently working with version X.
However, since getting a new laptop it doesn't work with Office 2013.
Can I upgrade to Standard XI?

Upgrade pricing now only applies to version 9 and X. So if you have a retail serial number for X, you should be able to upgrade. (Or consider subscription).

Process to Upgrade SAP HANA from SPS06 to SPS07 on distributed systems

Hi Experts,
We have a requirement to upgrade our SAP HANA system system from SPS06 to SPS07, but I have below queries on the same:
1) Do we need to consider any Notes before applying the upgrade for pre and post steps (as per my knowledge we have to consider post upgrade note: 1962472, are there any other too?)
2) As per my knowledge, we just need to stop SAP app systems and then backup of HANA system
3) Also we have a distributed environment in our landscape (three multiple hosts), what could be the upgrade approach, is it same as like single host environment (as /hana/shared will be the common to all distributed hosts)
Could anyone clarify my questions please.
Also for your information we have BW systems on top of HANA DB
Thanks very much in advance !
Kind Regards,
Arun Reddy
Message was edited by: Tom Flanagan

Hi John,
Thank you for the response, our source and target levels are (Source - 1.00.69.00.385196 Target - 1.00.74.03.392810)
I just wanted to ask you one more quick question here, can't we upgrade the above mentioned versions in one go? or we need to upgrade in two steps like, at first upgrading from 1.00.69.00.385196 to 1.00.73.00.389160 and then to target level 1.00.74.03.392810?
Also as you said in distributed environment we can upgrade as same like single host environment, so it same like below approach?
1) stopping the hana database
2) navigate to media path and then execute hdblcm in gui or command line
3) select option upgrading existing system
4) provide the passwords and system poped-up inputs
5) select the target levels of HANA components
6) once upgrade done successfully, then need to upgrade hana client in all app servers
if my above assumption is correct, then I have couple of questions like:
1) in which host we need to login and perform the upgrade? (as we are having three hosts- HANADB1, HANADB2, HANADB3) , is it okay we can do from any of the three hosts?
2) Also if upgrade stopped at middle due to errors, do we have option like to start the upgrade from the point where it stop? else we need to restore the lat successful backup and then again need to perform the upgrade from starting point?
Sorry for asking many questions, i have done the upgrade in single host environment, but not on distributed. So wanted to be make sure with all points to action the activity.
Thanks for your help and patience in advance !
Kind Regards,
Arun Reddy

Upgrading sap business one version 800232 is not allowed

Hi All
I got this error when I tried to run an upgrade from SBO 2007A PL 42 to SBO 8.8 PL3.
Any suggestions.
Regards
Bongani

Dear Bongani,
i found something for this Error i hope it help:
Zusammenfassung
Symptom
In the connection setting step or database selection step, the following error dialog appears: "Upgrade SAP Business One from version xxx is not allowed. Contact your SAP business partner for support."
Other terms
Upgrade Wizard, Upgrade Path, Restriction
Reason and Prerequisites
Application error
Due to the nature of development cycles, it takes some time for SAP Business One 8.8 to merge bug fixes from latest released install base patches. As a result, some upgrade paths are restricted in order to avoid data loss/duplicate upgrade in certain cases. For example: a bug fix is applied on 2007 A SP01 PL07 and merged with 8.8 PL05. If the database in 2007 A SP01 PL07 is upgraded to 8.8 PL04, the fix will be lost. In addition, there is a risk of data loss if the fix involves some metadata change. So 2007 A SP01 PL07 can only be merged with version 8.8 PL05 and higher.
Solution
SAP intends to provide a patch or patches in order to solve the problem described.
The section Reference to Related Notes below will list the specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
Please note that these references can only be set at patch release date.
SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
In addition to the bug fixes listed in this SAP Note, this patch contains also the bug fixes from:
SAP Business One 2007 A SP01 PL06,
SAP Business One 2007 B SP00 PL14.
For more details, please see the SAP Notes under the "Related Notes" tab.
IMPORTANT: Please note that if you are on a higher patch than the 2007A/2007B patch levels listed above and upgrades to 8.8, this may result in unexpected issues and potential data loss as the upgrade path is not supported yet.
Best regards,
Indira

Advice on upgrading ASA 5510 from version 8.4(4)1

Hello all,
Due to an issue we need to upgrade our ASA. Cisco Support team recommended upgrading to version 8.4.7, but, as we'll upgrade, we'd like to upgrade to version 9.
We still use Cisco VPN Client for Remote Access VPNs so I'd like your advice on which version to install on ASA.
Would you recommend version 9.0.3? 9.1.X?
Thanks in advance,
Igor

We have a pretty huge ASA and ASASM complex, and we are just about finished upgrading from an assortment of 8.4.x, 8.5.x, and 8.6.x installs to 9.1.3 on everything. There is one gotcha on some systems in that there is a file system change or some sort of bug that is fixed in 8.4.5 I think. So you _may_ have to first upgrade to a newer version (8.4.7 would work) before going to 9.1.3.
Our Cisco team has recommended going to version 9.x, and this is supported by recent tickets I've had on our stuff still running on 8.x, as the TAC engineer often says we need to upgrade to version 9.
Four our setup, we had some fatal bugs in 8.4.6 and 8.4.7 that kept us running 8.4.5 for a very long time on some equipment.
Anyway, I would recommend going to 9.1.3, which is one removed from the recently recleased 9.1.4. Our AnyConnect VPN complex has been on 9.1.3 for a few months now with no issues. Be sure to read the release notes thoroughly as 9.x changes some command contexts, new features, etc.
Graham

Upgrading SAP MDM from 1.0-2.0.

Hi all ,
Can anyone explain what will be responsibilites in the upgrade of MDM from 1.0 to 2.0 and what is ment by Variant Configuration and IPC configuration .
Thanks in advance ,
Regards
Reddy

Hi,
You can refer SAP note no 967088 for SRM MDM catlog1.0 configuration.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=967088
the reason of upgrade is better features with catlog2.0 like product relationships(alternate or substitute items),better search experience,better performance.
You can also refer
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1054303
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1057316
also u can refer the upgrade guide
https://websmp110.sap-ag.de/srm-inst
As mentioned earlier u require S ID for above notes.
Regards
Nisha

Any known issues on upgrading SAP Netweaver from 7.0 EHP1 SP5 to SP6

Hi All,
Please let me know the implications after upgrading our portal from 7.0 SP19 to SP21 and also Netweaver ABAP stack from BW 7.0 EHP1 SP 5 to 7.0 EHP1 SP6.
Thanks & Regards,
Sowmya
Edited by: Sowmya B on Apr 15, 2010 2:27 PM
Edited by: Sowmya B on Apr 16, 2010 6:44 AM

Hi Experts,
We're in the process of upgrading SAP NW 7.0 EhP1 SP3 to SP10 using Enterprise Portal. I download the all the patches MOPZ via in Solution Manager System. NW 7.0 EhP1 SP10 Related patches successfully downloaded. But i didnt get
Enterprise Portal related patches for Example.
sap.com/CAF-KM.SCA
sap.com/EP-PSERV.SCA
sap.com/EP-WDC.SCA
sap.com/EPBC.SCA
sap.com/EPBC2.SCA
sap.com/KMC-BC.SCA
sap.com/KMC-CM.SCA
sap.com/KMC-COLL.SCA
sap.com/LM-PORTAL.SCA
sap.com/NET-PDK.SCA
sap.com/RTC.SCA
sap.com/RTC-STREAM.SCA
sap.com/SAP-EU.SCA
sap.com/SAP_BUILDT.SCA
I serached through SMP, But I am getting NW 7.00 releated patches, But our current running pathes NW 7.0 EhP1 SP03 upgrade plan for SP10. Please How to download the Those Patches. Thanks for All.
Thanks,
Selva

I can't upgrade my Iphoto from version 9.1.1 (527)

Hi.
I am trying to upgrade my Iphoto. I currently have version 9.1.1 (527).
When i open Iphoto i get a promt, that there is a new version, and would i like to download it. Sure! But when the appstore opens, where the upgrade should be there is nothing there.
Ive tried other solutions, such as searching for Iphoto in Spotlight, opening Iphoto, and manually clicking the "search for updates" or what it is called in the drop-down menu.
Then i found differnt upgradefiles here on the apple-site. I downloaded upgrades 9.1, 9.3.1, 9.3.2. But when i tried to apply them, a error message says that i have to have Iphoto 9.1 installed on my mac to upgrade.. But, i have that already don't I, as i have Iphoto version 9.1.1 (527) ??
Ive read that you could delete it, and download it again from the appstore, but im not gonna pay to download something i already own !
Can anybody help me ?
Thanks,
Simen

How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
--> If you have moved iPhoto from the default location (i.e. into a Folder) then the updater won't find it. Move it back.
-- > If you have renamed iPhoto, the updater won't find it. Change it back.
Regards
TD

Upgrading call manager from version 8 to 9

Hi All
Can anyone please tell me the summary steps on what I need to do to go from call manager version 8 to version 9?
many thanks
Carl

The answer to your question, is that they entirely depend on you exact CUCM versions, asking here and just saying "8 "does not work. You will need to do your due diligence, and read:
A) Upgrade guide for your target version
B) Release Notes
C) New and changed doc, if not included in the RNs already
They will provide you with ALL you need to perform the upgrade, pre-reqs, procedure, and post-upgrade changes to the VM. All the information is available on cisco.com under the CUCM main documentation site.
Once you've been thru those, you can come back with any further questions.

I want to upgrade to Lion from version 10.4.11 how do I do this?

Hi
I want to upgrade my Macbook to the latest Lion software but do I have to upgrade to Snow Leopard first then go to Lion?
Can I do this online or do I need to go in store?
current version 10.4.11
thanks

You can upgrade from 10.4 to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/ You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any third party Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.
To upgrade your iLife and iWork. If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store after you've upgraded to 10.6.6. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each.
Once you are at 10.6.8 you can buy Lion for $29 from the App Store if you have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Unable to upgrade Flash Player from version 15 to 16

Hello Chris. The process is still not right. I've posted elsewhere but am unable to update Flashplayer from 15.xxx to 16.xxx. I can get the installer but the actual download stalls at 35% or so using Firefox, sometimes as high as 44% with Chrome. I don't play games but several sites have started initially denying me due to out-of-date FP. Otherwise I really would have quit trying. Using Window 7 Pro 64x, though several other programs are 32x----no idea what this means. I have deleted FP 15.xxx and the world has not ended--tho my patience has. There's gotta be a fix!

Sorry you're having problems with the update. Here's what I'd try:
1. Uninstall Flash Player using the stand alone installer here (do this even if you've uninstalled from the control panel): http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe
2. If the online installer is failing, go to our Flash Player Install Help page and scroll to the bottom of the page: Installation problems | Flash Player | Windows
3. At the bottom of the help page you'll find links to the ActiveX (IE) and NPAPI (Firefox) "standalone" installers. Download these and give them a try.
Ps. I broke this out into a new thread as the one you had replied to was over a year old and unrelated to installation.

Upgrading SAP BW from version 7.0 to 7.4

Similar Messages

Maybe you are looking for