Upgrading Service Manager to R2. Question on DW server
Upgrading our environment from SM 2012 SP1 RU2 to R2. I will be upgrading one DW server, one SM server and one Portal Server. Part of the procedure is exporting all sealed and unsealed MP's on the SM server. Is this also necessary on the DW server? I tried
to run the PowerShell command on the DW server to export MP's but it's not available. I would think the MPSync would copy all the MP's from SM to DW.
You really should do a daily backup of management packs. I actually just finished a blogpost on the subject. You can read it
here. There is a link where you can download the script and get started.
Cheers,
Anders Spælling
Senior Consultant
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful
Similar Messages
-
How to Upgrade Service Manager 2012 SP1 with Windows 2008 R2 to SCSM 2012 R2 with Windows 2012 R2
Hi,
We are using Service Manager 2012 SP1 UR2 with Windows 2008 R2.
I am planning to upgrade Service Manager to R2 with Windows 2012 R2. I found the steps to upgrade SCSM 2012 Sp1 to R2 but need assistance to upgrade with 2012 R2 OS.
Please suggest how to achieve the above mentioned objective.
Regards, Syed Fahad AliVirtualization solves this problem handily, by allowing you to create a new server to run the new program on the same hardware. it also solves the related problem of moving off unsupported hardware without changing OS or application. VMware is my personal
favorite, but Hyper-V, Xen, and VirtualBox all have similar capabilities.
Compare the cost of work and confidence in success of a upgrade, where any of thousands or millions of uncontrolled settings could cause an issue, to the cost of work and confidence in success of installing a new OS instance and configuring a known state
for the new environment.
In short, upgrades should no longer be a thing. there are just too many ways they can go wrong, and it's far too easy to create a new OS with minimal expense and effort. -
Getting error when trying to create Exchange Connector in System Center Service Manager 2012
Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-ITSomeone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support -
Service Manager 2012 R2 is not in a valid state.
I currently have Service Manager 2012 SP1 with update roll up 4 installed on our server. I also installed the web portal on the same server. later I installed the web portal on a separate server(I could not remove the web portal as we had already
started using the server and I can not just uninstall the web portal. I stopped the data warehouse jobs and updated the Data warehouse to 2012 R2 with no problems and started the update for the service manager server and I get an error when the setup
splash shows up " Microsoft System Center 2012 R2 Service Manager is not in a valid state". this is now a production server. I have backuped the DB and the management packs. for worst case. I have tried to run the update from all
user accounts I can think of I even detached the date warehouse thinking that some of the jobs had not stopped. I found a few links online regaurding the removal of the web portal with out removing the management server but I don't want to do
this on a production server. I am now stuck with a 2012 R2 data ware house( I can't use) and a 2012 SP1 management server and web portal. please help!!here is the SCSM setup wizard log (part of it)
this is what I have found "Could not find WCS portal web site name in setup registry!"
the web portal was installed and sharepoint was never installed then moved to a different server..
how do I remove the self-service portal and web parts of service manager with out removing the management server. (having to back up MPs and DBs and restoring them)
05:59:45:All vital setup files found.
05:59:45:Upgrading Service Manager 7.5.2905 with 7.5.3079
05:59:45:Checking dependencies for Server upgrade...
05:59:47:Getting Management Group information from PMR-SC-SM:ServiceManager
05:59:47:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=PMR-SC-SM;Initial Catalog=ServiceManager;Integrated Security=True;Persist Security Info=False.
05:59:47:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
05:59:47:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:PMR-SC-SM.adi.local.
05:59:47:Validating SmAdminRoleGroup
05:59:47:Checking dependencies for WCS Portal upgrade...
05:59:47:Could not find WCS portal web site name in setup registry!
05:59:48:***ERROR*** Microsoft System Center 2012 R2 Service Manager: Microsoft System Center 2012 R2 Service Manager is not in a valid state. -
Service Manager 2012 R2 report libraries don't deploy
So I've got a fresh install of Service Manager 2012 R2 with SQL Server '08 R2 in the 4 server layout, everything on Hyper-V. My issue is this: after registering the data warehouse, everything appears to function normally, the MPSyncJob completes its first
pass and other jobs show up in the list but the reports section of the management console is never populated. All of the management packs deploy just fine except for the report libraries and there is no indication/logs of issues on any of the servers. I've
gone through the manual setup setups for SSRS several times with no change in results. This is the 4th full reinstall of Service Manager with the same result.
Any thoughts? Is there any way to tell whether or not SSRS is actually functioning as intended? Are there any special database permissions that need to be configured for the DW reports service account (I have read all set)?here is the SCSM setup wizard log (part of it)
this is what I have found "Could not find WCS portal web site name in setup registry!"
the web portal was installed and sharepoint was never installed then moved to a different server..
how do I remove the self-service portal and web parts of service manager with out removing the management server. (having to back up MPs and DBs and restoring them)
05:59:45:All vital setup files found.
05:59:45:Upgrading Service Manager 7.5.2905 with 7.5.3079
05:59:45:Checking dependencies for Server upgrade...
05:59:47:Getting Management Group information from PMR-SC-SM:ServiceManager
05:59:47:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=PMR-SC-SM;Initial Catalog=ServiceManager;Integrated Security=True;Persist Security Info=False.
05:59:47:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
05:59:47:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:PMR-SC-SM.adi.local.
05:59:47:Validating SmAdminRoleGroup
05:59:47:Checking dependencies for WCS Portal upgrade...
05:59:47:Could not find WCS portal web site name in setup registry!
05:59:48:***ERROR*** Microsoft System Center 2012 R2 Service Manager: Microsoft System Center 2012 R2 Service Manager is not in a valid state. -
Why SCOM 2012 R2 Agent version for Service Manager servers is 6.1.7221.49, why not 7.1.10184.
Hi ,
In SCOM 2012 R2 console if i look at all of my agent managed servers have agent builds of 7.1.10184 but my two service manager servers have agent builds of 6.1.7221.49
Can anyone let me know is this known issue or how can we upgrade the agent to correct version.
Thanks in advance
BharathHi,
SCOM and SCSM are built on the same structure, Management Servers and DAta Warehouse etc. This means that when you install the SCSM Management Server, the Microsoft Monitoring Agent is also installed. When
you want to monitor Service Manager and the server it´s installed on, you need to configure the SCOM parameters from the control panel at the SCSM management server.
If you were to try and install the SCOM agent at the SCSM server, it would fail and tell you that you can´t install the agent on a server where Service Manager is installed. The agent will be upgraded when
you upgrade Service Manager so this is all expected and It´s as it should be :)
Regards,
Daniel
IT Consultant at Viridis IT -
Hello,
I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
I'm running Windows Server 2008 R2,
Any ideas?Hi saeedawadx,
Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
The following related article will give more helpful tips,
The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
Trouble Connecting to Cluster Nodes? Check WMI!
http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
System Center Service Manager 2012 SP1 upgrade install error
I am trying to upgrade my SCSM 2012 front end app server to SP1 and am getting these failures in the log when it fails with the error "Service Manager is not in a valid state"
09:07:58:Could not find WCS portal web site in IIS metabase!
09:08:02:***ERROR*** Microsoft System Center 2012 - Service Manager: Microsoft System Center 2012 - Service Manager is not in a valid state.
09:08:02:Application Ended
09:08:02:-222
Can someone tell me how to get this rectified? The WCS portal is installed and running and has been for months. The DW is upgraded but I cannot get the SharePoint self service portal or the App server to upgrade due to this error.Hello
One question you have the website installed on the same
server on which you have the Server Management
Server, so if you can
not make your upgrade to
SP1, this changed because
a prerequisite of System Center Service
Manager 2012 SP1 in which you can not have
the server Mangement and
website on the same server they have to be
separate. -
Stopping connections to Service Manager server during an upgrade
Planning an upgrade from 2012 SP1 to R2. The more I read, the more questions I have. Document from MS says to make sure there are no connections to the Service Manager server during the upgrade. How is this possible? Most of our connections are through
Citrix so we can check Citrix connections and disconnect them but what about local installs of the console on client computers? Is there some shell command to run to see active connections and terminate them? If so, how to you keep them from reconnecting?It's not really a big deal. just declare downtime and shut down your load balancer. a few errant connections won't cause a problem, but any changes that are submitted may not be saved.
-
Service manager Configuration Management Cube Library MP failed status after upgrade SCSM 20012 R2
Dear,
After the Upgrade to SCSM 2012 R2, the status of Service manager Configuration Management Cube Library MP is set to Failed and the System library MP is stuck on running in the eventvwr i got the following message:
Deployment Execution Infrastructure has retried the maximum number of times and is giving up on this execution step.
MP Element ID: SystemCenterWorkItemsCube
MP name: ServiceManager.ConfigurationManagement.Cubes.Library
MP version: 7.5.3079.0
Operation: Update
Error message: Errors in the metadata manager. The 'XXXXCustomerList_XXXXCustomerListId;' intermediate granularity attribute ID of the 'IncidentDim_XXXXXCustomerList' measure group dimension does not exist.
I already restarted the deployment of the MP
regards
GeertHi !
This looks like the "Primary Key Issue", documented in the MPSync-Fails Section at
http://technet.microsoft.com/en-us/library/jj614520.aspx
1.) Stop, Disable and Disable-Schedule for ALL DW-Jobs
2.) Follow instructions in the link
3.) Run DW-Jobs in correct oder like here
http://blogs.technet.com/b/mihai/archive/2013/07/03/resetting-and-running-the-service-manager-data-warehouse-jobs-separately.aspx
R. -
Upgrading SC 2012 Service Manager SP1 to System Center 2012 R2 - ERROR
Hi all
Problems when upgrade from Service Manager in Microsoft System Center 2012 Service Pack 1 (SP1) to Service Manager in System Center 2012 R2 in test lab.
I have two servers:
SM - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2
DW - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2.
I successfully installed SCSM 2012 R2 on both servers.
After restart data warehouse jobs receive error in Operation Manager log on DW.
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:48
Event ID: 33503
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
An error countered while attempting to execute ETL Module:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Stack: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Data Warehouse" />
<EventID Qualifiers="32768">33503</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-18T14:15:48.000000000Z" />
<EventRecordID>13089</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>DW2012.contoso.loc</Computer>
<Security />
</System>
<EventData>
<Data>Transform</Data>
<Data>22989</Data>
<Data>TransformEntityRelatesToEntityFact</Data>
<Data>UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.</Data>
<Data> at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:49
Event ID: 33502
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:49
Event ID: 33502
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityManagedTypeFact
Message: UNION ALL view 'DWRepository.dbo.EntityManagedTypeFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityManagedTypeFact_2013_May]'.
How to fix this error?For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus -
Hi All, looking for some assistance with the following issue.
We are attempting to upgrade our Operations Manager 2012 SP1 environment to Operations Manager 2012 R2.
We have completed all the pre-upgrade tasks detailed here
http://technet.microsoft.com/en-us/library/dn249704.aspx
We are then following the guidance detailed here regarding upgrading distributed management groups
http://technet.microsoft.com/en-us/library/dn249721.aspx. The upgrade fails on the first management server with the following screen being displayed.
OMServer.log file is as follows.
=== Verbose logging started: 22/01/2014 10:21:27 Build type: SHIP UNICODE 5.00.9200.00 Calling process: C:\Users\scomaction\AppData\Local\SCOM\Setup\SetupChainerUI.exe ===
MSI (c) (78:34) [10:21:27:040]: Resetting cached policy values
MSI (c) (78:34) [10:21:27:040]: Machine policy value 'Debug' is 0
MSI (c) (78:34) [10:21:27:040]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (c) (78:34) [10:21:27:040]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (78:34) [10:21:27:040]: Grabbed execution mutex.
MSI (c) (78:34) [10:21:27:071]: Cloaking enabled.
MSI (c) (78:34) [10:21:27:071]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (78:34) [10:21:27:071]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:082]: Running installation inside multi-package transaction F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:30) [10:21:27:082]: Grabbed execution mutex.
MSI (s) (D4:A0) [10:21:27:086]: Resetting cached policy values
MSI (s) (D4:A0) [10:21:27:086]: Machine policy value 'Debug' is 0
MSI (s) (D4:A0) [10:21:27:086]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (s) (D4:A0) [10:21:27:175]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (D4:A0) [10:21:27:181]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:190]: SRSetRestorePoint skipped for this transaction.
MSI (s) (D4:A0) [10:21:27:192]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (D4:A0) [10:21:27:200]: File will have security applied from OpCode.
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi' against software restriction policy
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi has a digital signature
MSI (s) (D4:A0) [10:21:27:354]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (D4:A0) [10:21:27:354]: MSCOREE not loaded loading copy from system32
MSI (s) (D4:A0) [10:21:27:360]: End dialog not enabled
MSI (s) (D4:A0) [10:21:27:360]: Original package ==> F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:A0) [10:21:27:360]: Package we're running from ==> C:\Windows\Installer\4b8344.msi
MSI (s) (D4:A0) [10:21:27:371]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:378]: Machine policy value 'TransformsSecure' is 1
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisablePatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:380]: Transforms are not secure.
MSI (s) (D4:A0) [10:21:27:380]: Note: 1: 2205 2: 3: Control
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log'.
MSI (s) (D4:A0) [10:21:27:380]: Command Line: OM_INSTALLDIR=F:\Program Files\Microsoft System Center 2012 R2\Operations Manager SEND_CEIP_REPORTS=0 MU_SETTING=0 ROOT_MANAGEMENT_SERVER_PORT=5723 SC_DB_SERVER=SCOM-XXX-AG SCDATABASENAME=OperationsManager DW_DB_SERVER=SCOM-XXX-AG DWDATABASENAME=OperationsManagerDW REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Users\scomaction\AppData\Local\SCOM\Setup CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=4472
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{58EFE971-58C1-4DBD-A400-A7607A745475}'.
MSI (s) (D4:A0) [10:21:27:380]: Product Code passed to Engine.Initialize: ''
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table before transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table after transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product not registered: beginning first-time install
MSI (s) (D4:A0) [10:21:27:380]: Product {C92727BE-BD12-4140-96A6-276BA4F60AC1} is not managed.
MSI (s) (D4:A0) [10:21:27:380]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (D4:A0) [10:21:27:381]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (D4:A0) [10:21:27:381]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (D4:A0) [10:21:27:381]: Adding new sources is allowed.
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:381]: Package name extracted from package path: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:381]: Package to be registered: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:383]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableMsi' is 1
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (D4:A0) [10:21:27:383]: Running product '{C92727BE-BD12-4140-96A6-276BA4F60AC1}' with elevated privileges: Product is assigned.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding OM_INSTALLDIR property. Its value is 'F:\Program Files\Microsoft System Center 2012 R2\Operations Manager'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding ROOT_MANAGEMENT_SERVER_PORT property. Its value is '5723'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Modifying SC_DB_SERVER property. Its current value is 'OperationsManager'. Its new value: 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DW_DB_SERVER property. Its value is 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DWDATABASENAME property. Its value is 'OperationsManagerDW'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Setup'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4472'.
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (D4:A0) [10:21:27:383]: RESTART MANAGER: Disabled by MSIRESTARTMANAGERCONTROL property; Windows Installer will use the built-in FilesInUse functionality.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: TRANSFORMS property is now:
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (D4:A0) [10:21:27:395]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming
MSI (s) (D4:A0) [10:21:27:396]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Favorites
MSI (s) (D4:A0) [10:21:27:398]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (D4:A0) [10:21:27:399]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Documents
MSI (s) (D4:A0) [10:21:27:401]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (D4:A0) [10:21:27:402]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (D4:A0) [10:21:27:404]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (D4:A0) [10:21:27:406]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Local
MSI (s) (D4:A0) [10:21:27:408]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Pictures
MSI (s) (D4:A0) [10:21:27:411]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:413]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:414]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:415]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:417]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (D4:A0) [10:21:27:420]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:421]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:423]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:424]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:426]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Desktop
MSI (s) (D4:A0) [10:21:27:427]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:428]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (D4:A0) [10:21:27:428]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (D4:A0) [10:21:27:433]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\4b8344.msi'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi'.
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: User policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 22/01/2014 10:21:27 ===
MSI (s) (D4:A0) [10:21:27:435]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:436]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (D4:A0) [10:21:27:438]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (D4:A0) [10:21:27:438]: Doing action: INSTALL
Action start 10:21:27: INSTALL.
MSI (s) (D4:A0) [10:21:27:444]: Running ExecuteSequence
MSI (s) (D4:A0) [10:21:27:444]: Doing action: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76
MSI (s) (D4:A0) [10:21:27:447]: PROPERTY CHANGE: Adding SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:448]: Doing action: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76
Action ended 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:450]: PROPERTY CHANGE: Adding System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:450]: Doing action: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6
Action ended 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:452]: PROPERTY CHANGE: Adding WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6.
MSI (s) (D4:A0) [10:21:27:453]: Doing action: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522
Action ended 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6. Return value 1.
MSI (s) (D4:A0) [10:21:27:455]: PROPERTY CHANGE: Adding System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522.
MSI (s) (D4:A0) [10:21:27:456]: Doing action: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522. Return value 1.
MSI (s) (D4:A0) [10:21:27:458]: PROPERTY CHANGE: Adding WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:458]: Doing action: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:461]: PROPERTY CHANGE: Adding SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:461]: Doing action: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:463]: PROPERTY CHANGE: Adding WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:463]: Doing action: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:466]: PROPERTY CHANGE: Adding System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:467]: Doing action: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8
Action ended 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:468]: PROPERTY CHANGE: Adding WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8.
MSI (s) (D4:A0) [10:21:27:469]: Doing action: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9
Action ended 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8. Return value 1.
MSI (s) (D4:A0) [10:21:27:471]: PROPERTY CHANGE: Adding WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
MSI (s) (D4:A0) [10:21:27:472]: Doing action: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE
Action ended 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9. Return value 1.
MSI (s) (D4:A0) [10:21:27:474]: PROPERTY CHANGE: Adding WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE.
MSI (s) (D4:A0) [10:21:27:475]: Doing action: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE. Return value 1.
MSI (s) (D4:A0) [10:21:27:477]: PROPERTY CHANGE: Adding ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\'.
Action start 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4:A0) [10:21:27:477]: Doing action: FindRelatedProducts
Action ended 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
Action start 10:21:27: FindRelatedProducts.
MSI (s) (D4:A0) [10:21:27:481]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT_AGENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _SearchOpsMgrShellPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Doing action: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: FindRelatedProducts. Return value 1.
MSI (s) (D4:08) [10:21:27:501]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI847C.tmp, Entrypoint: SetMonadFilePath
MSI (s) (D4:B0) [10:21:27:502]: Generating random cookie.
MSI (s) (D4:B0) [10:21:27:505]: Created Custom Action Server with PID 4964 (0x1364).
MSI (s) (D4:34) [10:21:27:527]: Running as a service.
MSI (s) (D4:34) [10:21:27:529]: Hello, I'm your 64bit Impersonated custom action server.
Action start 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4!DC) [10:21:27:638]: PROPERTY CHANGE: Modifying MONAD_SHELL_PATH property. Its current value is 'Error: Value Never Set. Check the CACore:SetMonadFilePath CA'. Its new value: 'C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe'.
GetRegistyStringValue: Registy key value found.. C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
MSI (s) (D4:A0) [10:21:27:640]: Doing action: _Set_CORECOMPONENTPRESENT
Action ended 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
MSI (s) (D4:A0) [10:21:27:643]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
Action start 10:21:27: _Set_CORECOMPONENTPRESENT.
MSI (s) (D4:A0) [10:21:27:644]: Skipping action: _AbortDowngradeProductAttempt (condition is false)
MSI (s) (D4:A0) [10:21:27:644]: Doing action: _AbortIncompatibleComponents
Action ended 10:21:27: _Set_CORECOMPONENTPRESENT. Return value 1.
Action start 10:21:27: _AbortIncompatibleComponents.
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5044 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1580 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5512 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 4268 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5024 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 6064 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 3396 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 2704 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5568 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5940 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1968 could not be cancelled. Error: 1168
MSI (s) (D4:A0) [10:21:27:652]: Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
Action ended 10:21:27: _AbortIncompatibleComponents. Return value 3.
Action ended 10:21:27: INSTALL. Return value 3.
Property(S): DiskPrompt = Please Insert Disk 1
Property(S): UpgradeCode = {17058653-A628-4C03-8F80-5E2B179ECD55}
Property(S): SCDATABASENAME = OperationsManager
Property(S): SC_DB_SERVER = SCOM-XXX-AG
Property(S): SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): CORECOMPONENTPRESENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): OM_INSTALLDIR = F:\Program Files\Microsoft System Center 2012 R2\Operations Manager
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): Privileged = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): DONOTSKIPDELETESERVICES = 0
Property(S): DONOTSKIPINSTALLSERVICES = 0
Property(S): OM_COMMON_PRODUCT_REGISTRY_PATH = SOFTWARE\Microsoft\System Center Operations Manager
Property(S): OM_COMMON_PRODUCT_RELEASE_REGISTRY_KEY = 12
Property(S): OM_COMMON_PRODUCT_DEFAULT_INSTALL_DIR = System Center Operations Manager
Property(S): NetFxVersion = v2.0.50727
Property(S): IS_OM_SERVER = 1
Property(S): InstallAPMAgent = 1
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): ARPNOREPAIR = 0
Property(S): ARPURLINFOABOUT = http://www.microsoft.com/mom
Property(S): ARPURLUPDATEINFO = http://www.microsoft.com/mom
Property(S): ARPHELPLINK = http://support.microsoft.com
Property(S): MSIRESTARTMANAGERCONTROL = Disable
Property(S): SQL_PORT = 1433
Property(S): DbSizeGood = 1
Property(S): DbFileOptionsGood = 1
Property(S): DbFilesSpaceGood = 1
Property(S): DbNameGood = 1
Property(S): SqlServicesStarted = 1
Property(S): _SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): DialogWizardTitle = System Center 2012 R2 Operations Manager Setup
Property(S): MinimumOSMsg = This product must be installed on Windows Server 2008 R2 or higher.
Property(S): MOMSDKPortDesc = Operations Manager SDK.
Property(S): MOMConnectorPortDesc = Operations Manager Connector Framework.
Property(S): MOMAEMPortDesc = Operations Manager Application Error Monitoring.
Property(S): MOMSQMPortDesc = Operations Manager Customer Experience Improvement Program.
Property(S): MOMHSPortDesc = System Center Management Health Service
Property(S): SCOMV3SP1ProgramName = System Center 2012 R2 Operations Manager
Property(S): FWRulePingRequestName = Operations Manager Ping Request (Echo Request - ICMPv4 OUT)
Property(S): FWRulePingRequestDesc = Operations Manager network monitoring ping request
Property(S): FWRulePingResponseName = Operations Manager Ping Response (Echo Response - ICMPv4 IN)
Property(S): FWRulePingResponseDesc = Operations Manager network monitoring ping response
Property(S): FWRuleSnmpRequestName = Operations Manager SNMP Request
Property(S): FWRuleSnmpRequestDesc = Operations Manager network monitoring SNMP request
Property(S): FWRuleSnmpResponseName = Operations Manager SNMP Response
Property(S): FWRuleSnmpResponseDesc = Operations Manager network monitoring SNMP response
Property(S): FWRuleSnmpTrapListenerName = Operations Manager SNMP Trap Listener
Property(S): FWRuleSnmpTrapListenerDesc = Operations Manager network monitoring SNMP trap listener
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {C92727BE-BD12-4140-96A6-276BA4F60AC1}
Property(S): ProductLanguage = 1033
Property(S): ProductName = System Center Operations Manager 2012 Server
Property(S): ProductVersion = 7.1.10226.0
Property(S): SecureCustomProperties = ACTIONSPASSWORD;CORECOMPONENTPRESENT_AGENT;CORECOMPONENTPRESENT_GW;CORECOMPONENTPRESENT_RC;CORECOMPONENTPRESENT_SCE;CORECOMPONENTPRESENT_SMB2;CORECOMPONENTPRESENT_SMRTM;IS_AVICODE_AGENT_INSTALLED;IS_MOMASPAGENT_INSTALLED;MOM_DB_SERVER;MOMDATABASENAME_OLD;OM_NEWER_PRODUCT_FOUND;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650;SQL_PORT
Property(S): MsiHiddenProperties = _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;_SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;ACTIONSPASSWORD;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650
Property(S): WixPdbPath = d:\btvsts\20867\private\product\setup\wix\msi\server\om\obj\amd64\OMServer.wixpdb
Property(S): CORECOMPONENTPRESENT_AGENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): MONAD_SHELL_PATH = C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Property(S): EnableEV.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = 1
Property(S): AddInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = add
Property(S): RemoveInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = remove
Property(S): WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE = C:\Windows\
Property(S): VersionNT = 602
Property(S): DW_DB_SERVER = SCOM-XXX-AG
Property(S): DWDATABASENAME = OperationsManagerDW
Property(S): OMDATABASENAME = OperationsManger
Property(S): MaximumDataAgeMinutes = 10080
Property(S): MaximumQueueSizeKB = 102400
Property(S): MOMSDKPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 5724
Property(S): MOMConnectorPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51905
Property(S): MOMAEMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51906
Property(S): MOMSQMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51907
Property(S): SDK_SERVICE_TYPE = 4
Property(S): ROOT_MANAGEMENT_SERVER_PORT = 5723
Property(S): SERVER_MANAGEMENT_GROUP_TYPE.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = 1
Property(S): MaximumForwardedVirtualQueuePercentage = 8
Property(S): QueueSendDataSinglePriority = 0
Property(S): ADMIN_ROLE_GROUP.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = Administrators
Property(S): USE_MANUALLY_SPECIFIED_SETTINGS = 1
Property(S): WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 = C:\Windows\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): CAN_REGISTER_FOR_MU = 0
Property(S): MU_SETTING = 0
Property(S): IS_ROOT_HEALTH_SERVICE = 0
Property(S): IS_MOM_SERVER = 0
Property(S): IS_MOM_GATEWAY = 0
Property(S): WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 = C:\Windows\
Property(S): WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\
Property(S): System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\system32\
Property(S): DirectoryTable100_amd64.1C11561A_11CB_36A7_8A47_D7A042055FA7 = DirectoryTable
Property(S): WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\
Property(S): SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\SysWOW64\
Property(S): DirectoryTable100_x86.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = DirectoryTable
Property(S): SEND_CEIP_REPORTS = 0
Property(S): System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 = C:\Windows\system32\
Property(S): ACS_AGENT_ACCOUNT.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 =
Property(S): WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 = C:\Windows\
Property(S): SC_COMMON_REGISTRY_PATH = SOFTWARE\Microsoft\System Center\2010\Common
Property(S): DISCOVERY_DATA_AUTHORIZATION_ENABLED = 0
Property(S): IcmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): IcmpRequestType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 8:*
Property(S): IcmpResponseType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0:*
Property(S): SnmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 17
Property(S): SnmpPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 161
Property(S): SnmpTrapPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 162
Property(S): DirectionIn.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0
Property(S): DirectionOut.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\SysWOW64\
Property(S): System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\system32\
Property(S): ADVISOR_UPLOADFREQUENCY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_UPLOADDAY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEHOUR_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEMIN_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_MAXCACHESIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_MAXMAILBOXSIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_ARCHIVEPERIOD_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #5
Property(S): ADVISOR_LOGLEVEL_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #3
Property(S): ADVISOR_NEEDMPINITIALIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_LYNC_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): ADVISOR_SHAREPOINT_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): MsiLogFileLocation = C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log
Property(S): PackageCode = {58EFE971-58C1-4DBD-A400-A7607A745475}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): REBOOT = ReallySuppress
Property(S): CURRENTDIRECTORY = C:\Users\scomaction\AppData\Local\SCOM\Setup
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 4472
Property(S): MsiSystemRebootPending = 1
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 602
Property(S): WindowsBuild = 9200
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\SCOMAC~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): AppDataFolder = C:\Users\scomaction\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\scomaction\Favorites\
Property(S): NetHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\scomaction\Documents\
Property(S): PrintHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\scomaction\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\scomaction\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 7854
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = scomaction
Property(S): UserSID = S-1-5-21-607126847-70518424-489426498-210484
Property(S): UserLanguageID = 2057
Property(S): ComputerName = SCOMMS1-VM
Property(S): SystemLanguageID = 2057
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 10:21:27
Property(S): Date = 22/01/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.17929
Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\4b8344.msi
Property(S): OriginalDatabase = F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (D4:A0) [10:21:27:697]: Note: 1: 1708
MSI (s) (D4:A0) [10:21:27:698]: Product: System Center Operations Manager 2012 Server -- Installation operation failed.
MSI (s) (D4:A0) [10:21:27:698]: Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (D4:A0) [10:21:27:744]: Deferring clean up of packages/files, if any exist
MSI (s) (D4:A0) [10:21:27:744]: MainEngineThread is returning 1603
MSI (s) (D4:30) [10:21:27:744]: No System Restore sequence number for this installation.
=== Logging stopped: 22/01/2014 10:21:27 ===
MSI (s) (D4:30) [10:21:27:746]: User policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D4:30) [10:21:27:747]: Destroying RemoteAPI object.
MSI (s) (D4:B0) [10:21:27:747]: Custom Action Manager thread ending.
MSI (c) (78:34) [10:21:27:748]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:34) [10:21:27:749]: MainEngineThread is returning 1603
=== Verbose logging stopped: 22/01/2014 10:21:27 ===
Any assistance anyone can provide will be greatly appreciated.Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
Issue working with WPF client v6.1.0.3 for SAP Service Manager 4.0
Hi All,
This issue is similar to an on - going discussion - http://scn.sap.com/thread/3508608
Issue Description :
1. We installed WPF client 6.1.03 for SAP Service Manager 4.0 using SMP 2.3 SP00. We got the below error
2. To solve this error we followed the forum - http://scn.sap.com/thread/3465106 and installed the certificate following the link for installing the self signed certificate from Sybase infocenter.
3. We came to know that this is due to the SMP version. hence as suggested by SAP we upgraded the server to SMP 2.3 SP03
4. We tried to connect the WPF client and again got the error "Communication error 14"
My Question is
1. After the server upgrade from SP2.3 SP03 , do I still need to generate a certificate again ? Is yes Please guide me the steps/document to do this step
2. Is there any document which mentions how exactly we use the WPF client, the configuration to connect the SAP backend and download the Syclo Service Manager 4.0 application without any issue
Please guide
Thanks
NehaHI Steve,
I tested with the WPF client 6.1.3.X.
I was getting a different error with the host name "Connect to server myhostname certificate is for myhostname:domain name this is not valid. Commnication error(14)
However I got the solution in one of the link where they mention to provide the complete fully qualified domain name in the server ie myhostname:domain .
This has solved the issue and the WPF client is up and running.
Thanks for the help
Regards
Neha Mahanty -
Data Migration Service Manager 2010 and 2012 database to SCSM 2012 R2
I have search the web far and wide for a good answer to this question. We are consolidating two separate instances of Service Manager (one is 2010 and the other is 2012). We will being moving to a new Service Manager 2012 R2 instance. We
don't want to upgrade the older versions SCSM (i.e. 2010 and 2012) of the software installation do to various reasons.
We want to export all open ticket from Service Manager 2010 and 2012, and import then into the new SCSM 2012 R2 database. The best advice I can find is:
Export the data into a CSV file and import into SCSM 2012 R2 DB through a connector. I think there maybe too many data dependencies to do that efficiently.
I didn't find this, and I am hoping not to use this option which would be upgrade the two instances of SCSM 2010 and 2012 apps and DBs to 2012 R2, then some how transfer the data to the new SCSM 2012 R2 instance.
I am not sure any of these idea would even work, but I don't want to ask a question without trying to workout some possibilities.
Thanks,
Jay...Hi,
You may simply duplicate your SCSM 2010 environment and upgrade it to SCSM 2012
http://technet.microsoft.com/en-us/library/hh914226.aspx
Regards
Antoine AL Ibry -
Confirming method to secure web services through oracle web service manager
Hi All,
I am just wondering about the method to secure web service through oracle web service manager.
I have a unsecure web service "helloworld" which is deployed on JWSDP1.6 toolkit.I want to secure it through oracle web service manager.
Inorder to secure this unsecure web service,I use gateway(web service manager for securing web service using message level security through certificate).
So when client want to access the helloworld service,it contacts the gateway securely and gateway intern connect to original web service after decrypting and verification of the signature.When gateway gets response from the web service,it signs the response message and then encrypt and passs on to the client.
So my question is,is it the right way to secure web service?
As I am getting the following fault exception :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode "http://schemas.oblix.com/ws/2003/08/Faults">c</faultcode>
<faultstring>Step execution failed with an exception
</faultstring>
<detail></detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I checked the log at :
C:\coresv_install_home\external\oc4j-10.1.2.0.0\j2ee\home\log\http-web-access
but there is no helpful information available.Thanks for any help.
KashHi Rajesh,
Thanks for your reply.I am using the following policy steps:
1)for Request (Decrypt and Verify signature).
2)for Response(Sign Message and Encrypt).
The configuration for Request is shown below:
Pipeline "Request"
Pipeline Steps:
Start Pipeline
Log
Decrypt and Verify Signature
Basic Properties Type Default Value
Enabled (*) boolean true true
XML Decryption Properties Type Default Value
Decryptor''s keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Decrypt Keystore Type (*) string jks jks
Decryptor''s keystore password string *******
Decryptor''s private-key alias (*) string s1as
Decryptor''s private-key password string *******
Enforce Encryption (*) boolean true true
XML Signature Verification Properties Type Default Value
Verifying Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Verifying Keystore type (*) string jks jks
Verifying Keystore password string *******
Signer''s public-key alias (*) string xws-security-client
Enforce Signing (*) boolean true true
End Pipeline
And the configuration for Response is shown below:
Pipeline "Response"
Pipeline Steps:
Start Pipeline
Log
Sign Message and Encrypt
Basic Properties Type Default Value
Enabled (*) boolean true true
Signing Properties Type Default Value
Signing Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Signing Keystore Type (*) string jks jks
Signing Keystore password string *******
Signer''s private-key alias (*) string s1as
Signer''s private-key password string *******
Signed Content (*) string BODY BODY
Sign XPATH Expression string
Sign XML Namespace string[]
Encryption Properties Type Default Value
Encryption Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Encrypt Keystore Type (*) string jks jks
Encryption Keystore password string *******
Decryptor''s public-key alias (*) string xws-security-client
Encrypted Content (*) string BODY BODY
Encrypt XPATH Expression string
Encrypt XML Namespace string[]
End Pipeline
I checked the log again but nothing useful there,it is just giving the following values:
2006-08-14 16:32:50,372 INFO [Thread-21] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - INSERT INTO MEASUREMENT_PERSISTED_STORE (ID,DEF_ID,CONTEXT_ID,PARENT_CONTEXT_ID,TIME,STORETIME,KEY0,KEY1,KEY2,KEY3,KEY4,KEY5,KEY6,KEY7,KEY8,KEY9,KEY10,KEY11,KEY12,KEY13,KEY14,KEY15,KEY16,KEY17,KEY18,KEY19,KEY20,KEY21,KEY22,KEY23,KEY24,KEY25,KEY26,KEY27,KEY28,KEY29,KEY30,KEY31,KEY32,KEY33,KEY34,KEY35,KEY36,KEY37,KEY38,KEY39,DBM0,MEASUREMENT_STR) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,'R',empty_clob())
2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
Any help would be appreciated.Thanks.
Kash
Maybe you are looking for
-
Hello everyone. I am new to this forum and would like everyone to advise me upon something http://www.templatemonster.com/flash-templates/22466.html When you click on any link and view the template, some black fragments come up and join together to
-
System date format in reports (winnt)
Hello All, I am using oracle report bulder 6.0.5.35. on winnt i have to show all the date fields in my report in the system format (as specified in the regional settings in control panel) i couldn't find a direct solution, so what i did was to create
-
Permission request for going full screen and border alert removal.
Ok so I play some applications games on facebook and currently everytime I go to full screen via the game it requires me to "allow" the program to go full screen. Also there is always a border alert if my cursor touches it and causes an alert to pop
-
How can i open up my i tunes account from my iphone on my husbands mac as he already has 1 set up?
How can i open up my i tunes account from my i phone on my husbands mac as he alraedy has an i tunes account already set up?
-
Macbook, Snow Leopard 10.6.8. Safari 5.1.1 Since the last software update, Safari will not save bookmarks history. Prefs. are set correctly, Cache has been dumped, reset done, appropriate .plist trashed, and finally an uninstall and clean install do