Upgrading system from 3.1c to 3.5 questionnaire

Hello All,
We are upgrading our system from 3.1c to 3.5.So can somebody please send me some upgradation Questionnaire doc for client.
Regards
Satish

Hi Satish,
Give me ur mail id, i can send u one document.
Regards,
ARK

Similar Messages

How to upgrading system from CRM 4.0 to 7.0

How to upgrading CRM system from CRM 4.0 to 7.0 ?
What is procedure to upgrate it ? Any document available for doing this ?
Regards,
Anup Reche

Hi
You can find the upgrade documentation here:
http://service.sap.com/instguides
SAP Business Suite Applications > SAP CRM > SAP CRM 7.0 >Upgrade
hope it helps
Rupesh

How to upgrade system from serial communication to parallel communication

Hi,
I am working on Lab VIEW 8.5.In my project I am using ADAM cards(7) for analog/digital inputs/outputs. Communication is done via RS 232 serial cable. Right now my system is working fine, but if i want to make it more fast i will need to use parallel communication right? Because Simultaneous inputs and outputs are processed. How much my communication file will change? Which card i should use?
How to upgrade system? On which factors it depends or it affects? I need guide lines.
Thank you
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Hi
In your setup you have a ADAM 4250 RS232/485 repeater talking with 7 instruments in a network. Each instrument have a unique address, and you can only address 1 instrument at a time. If you need more speed you have to insert more ADAM 4250 units in your system and more RS232 ports on the PC. Identical ADAM instruments may receive commands over the same communication line, but transmit data on a unique communication line. You can not use the parallel port in your setup at all. This is not a Labview problem but a hardware problem. If speed is critical maybe the Ethernet I/O Modules: ADAM-6000 series are better for your setup
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Upgrade system from iso image

Hi there, due the bandwith's situation in my country, download base image (+60) each month is almost imposible. There is any way to upgrade from a cd image? Arch's .iso are copied from other persons via pendrives. Could I roll the base system to "pristine", I mean, make a .tar.xz from the syystem and use that packgages for upgrade my system then?
Last edited by Uranio-235 (2014-08-27 15:43:44)

Uranio-235 wrote:Where is the money's plant three??? And again, CAN NOT DOWNLOAD THE REPO, I have only the iso image
If you're going to argue with every suggestion made, why bother posting in the first place? English doesn't appear to be your native language, so there seems to be a communication gap here. We're trying to help, but you refuse to listen, keep repeating yourself (without clarifying anything) and expect to be spoon-fed the information you seek.
Uranio-235 wrote:Wrong distro for this country
That's fine, no one is making you use Arch. You have the freedom to choose whatever distribution suits you best. As you seem to have worked out, Arch doesn't seem to be suitable for your situation. This doesn't mean Arch has a problem or is broken, it just means it's not suitable for you. I'm sorry if you feel slighted by this.
Uranio-235 wrote:Please, close this thread
As requested.

Upgrading System from 10.3.9 to 10.4.8

I must admit tha I have been negligent in staying on top of system software upgrades. I now have 10.3.9 and need to upgrade to at least 10.4.8 to be able to install Adobe CS3.
All I see in the Apple store is OS X10.5, which needs at least 500 mhz processor. My computer has 400mhz. I saw a couple of discussions about upgrading the processor. No one at my local Mac store has even heard of a G4... What should I do?

They've never heard of a G4? That's shocking, perhaps you shouldn't go there anymore :P.
OS X 10.5 requires at least an 867 MHz G4, unfortunately. You can upgrade to OS X Tiger (10.4) though (Just run software update after installation to get to 10.4.11).
You can find Tiger cheap on eBay or the likes, note you must buy the full retail version which looks like this:
http://jimbox.homedns.org/rants/images/uploads/tiger1.jpg

Upgrading system from OS X 10.6.8 to Lion or Mountain Lion?

Can I upgrade a MacBook system to Lion?

A Late 2009 MacBook with at least 2GB of RAM can be upgraded to Mountain Lion, which is available in the Mac App Store.
(88329)

How to delete file systems from a Live Upgrade environment

How to delete non-critical file systems from a Live Upgrade boot environment?
Here is the situation.
I have a Sol 10 upd 3 machine with 3 disks which I intend to upgrade to Sol 10 upd 6.
Current layout
Disk 0: 16 GB:
/dev/dsk/c0t0d0s0 1.9G /
/dev/dsk/c0t0d0s1 692M /usr/openwin
/dev/dsk/c0t0d0s3 7.7G /var
/dev/dsk/c0t0d0s4 3.9G swap
/dev/dsk/c0t0d0s5 2.5G /tmp
Disk 1: 16 GB:
/dev/dsk/c0t1d0s0 7.7G /usr
/dev/dsk/c0t1d0s1 1.8G /opt
/dev/dsk/c0t1d0s3 3.2G /data1
/dev/dsk/c0t1d0s4 3.9G /data2
Disk 2: 33 GB:
/dev/dsk/c0t2d0s0 33G /data3
The data file systems are not in use right now, and I was thinking of
partitioning the data3 into 2 or 3 file systems and then creating
a new BE.
However, the system already has a BE (named s10) and that BE lists
all of the filesystems, incl the data ones.
# lufslist -n 's10'
boot environment name: s10
This boot environment is currently active.
This boot environment will be active on next system boot.
Filesystem fstype device size Mounted on Mount Options
/dev/dsk/c0t0d0s4 swap 4201703424 - -
/dev/dsk/c0t0d0s0 ufs 2098059264 / -
/dev/dsk/c0t1d0s0 ufs 8390375424 /usr -
/dev/dsk/c0t0d0s3 ufs 8390375424 /var -
/dev/dsk/c0t1d0s3 ufs 3505453056 /data1 -
/dev/dsk/c0t1d0s1 ufs 1997531136 /opt -
/dev/dsk/c0t1d0s4 ufs 4294785024 /data2 -
/dev/dsk/c0t2d0s0 ufs 36507484160 /data3 -
/dev/dsk/c0t0d0s5 ufs 2727290880 /tmp -
/dev/dsk/c0t0d0s1 ufs 770715648 /usr/openwin -
I browsed the Solaris 10 Installation Guide and the man pages
for the lu commands, but can not find how to remove the data
file systems from the BE.
How do I do a live upgrade on this system?
Thanks for your help.

Thanks for the tips.
I commented out the entries in /etc/vfstab, also had to remove the files /etc/lutab and /etc/lu/ICF.1
and then could create the Boot Environment from scratch.
I was also able to create another boot environment and copied into it,
but now I'm facing a different problem, error when trying to upgrade.
# lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10                        yes      yes    yes       no     -
s10u6                      yes      no     no        yes    -        Now, I have the Solaris 10 Update 6 DVD image on another machine
which shares out the directory. I mounted it on this machine,
did a lofiadm and mounted that at /cdrom.
# ls -CF /cdrom /cdrom/boot /cdrom/platform
/cdrom:
Copyright                     boot/
JDS-THIRDPARTYLICENSEREADME   installer*
License/                      platform/
Solaris_10/
/cdrom/boot:
hsfs.bootblock   sparc.miniroot
/cdrom/platform:
sun4u/   sun4us/ sun4v/Now I did luupgrade and I get this error:
# luupgrade -u -n s10u6 -s /cdrom
ERROR: The media miniroot archive does not exist </cdrom/boot/x86.miniroot>.
ERROR: Cannot unmount miniroot at </cdrom/Solaris_10/Tools/Boot>.I find it strange that this sparc machine is complaining about x86.miniroot.
BTW, the machine on which the DVD image is happens to be x86 running Sol 10.
I thought that wouldn't matter, as it is just NFS sharing a directory which has a DVD image.
What am I doing wrong?
Thanks.

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. How can I retrieve my photos without buying iPhoto?

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.

I fail to remember if the installer gave me an option to keep my applications.
The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
Does your iPhoto icon in the Applications folder look like this?
Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site http://support.apple.com/kb/DL1650.
But if you have 8.x.x, you need to buy an upgrade.
Regards
Léonie

Upgrade MacBook Hard Drive - Restore System from Time Machine Backup?

I have a MacBook that I want to upgrade the hard drive of. Am I right in thinking, all I need to do is:
Run Time Machine one last time, to make a recent backup of the MacBook
Install the new hard drive in the MacBook
Insert the Snow Leopard DVD, and start a clean installation
During installation, select the option to Restore System From Backup...
Will this copy across ALL of the contents of the old MacBook's hard drive, to the new MacBook's hard drive? A perfect clone? Because that's what I want to do.

I performed the installation, restoring a Time Machine backup from the external hard drive to the new blank internal one I put inside the MacBook. Everything went fine, except for one problem.
Now, whenever I try to open Safari, it immediately crashes with the error message:
"Safari quit unexpectedly
Exception Type: EXC_BAD_ACCESS (SIGSEGV)"
What's going on? How can I stop Safari from doing this? I've repaired permissions using Disk Utility, and Spotlight has finished re-indexing everything.

I w system from OSX 10.5.8 to at least 10.6. Also my hard drive is partitioned for Mac and Windows (which I would like to remove). How should I upgrade?

I want to buy an Iphone 5 but need to upgrade my operating system from OSX 10.5.8 to at least 10.6.0. Also my hard drive is partitioned with Mac and Windows. How can I upgrade?

1. Click here and buy a Mac OS X 10.6 DVD.
2. Use the Boot Camp Assistant in the /Applications/Utilities/ folder to return the drive to a single partition setup.
(83003)

Error occured when upgrading PI (7.0) system from SP10 to SP 20.

We have upgrade our PI (7.0) system from SP10 to SP 20.
Here the proxy is used to update the database.
Itu2019s failing at the synchronous proxy when XI is sending data to Proxy.
Problem still exists even after regenerating the proxy.
The following problem is faced
The request XML is like
<?xml version="1.0" encoding="utf-8" ?><ns1:MT_PROCESS_INSTANCE_CREATE
xmlns:ns1="http://spc_processes/generic"><OBJECT_TYPE>P01</OBJECT_TYPE><OBJECT_ID>4B7B87708C
770176E10080000sa</OBJECT_ID><LANGUAGE>EN</LANGUAGE><DESCRIPTION>20100218-001 : xxxx
bbb</DESCRIPTION><STATUS>01</STATUS><TYPE>2</TYPE><REQUEST_ID>200-001</REQUEST_ID><OBJ
ECT_KEYTYPE>LASTNAME</OBJECT_KEYTYPE><OBJECT_KEYVALUE>zzzzzz</OBJECT_KEYVALUE><LAST_STEP_STATU
S>00</LAST_STEP_STATUS></ns1:MT_PROCESS_INSTANCE_CREATE>
And the response XML is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProxy</SAP:Category><SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code><SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_ST_MATCH_ELEMENT</SAP:P2>
<SAP:P3>/1SAI/TXS00000000000000000036 Line 289</SAP:P3>
<SAP:P4>System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE' XML Bytepos.: 112 XML Path: ns1:MT_PROCESS_INSTANCE_CREATE(1)</SAP:P4>
<SAP:AdditionalText/>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>Error during XML => ABAP conversion: Request Message; CX_ST_MATCH_ELEMENT in /1SAI/TXS00000000000000000036 Line 289 System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE' XML Bytepos.: 112 XML Path: ns1:MT_PROCESS_INSTANCE_CREATE(1)
System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE'
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
I'm a bit new to PI.Please explain in detail.
Thanks in advance!!

Hello
Try the following workaround:
Go to trx: Sproxset:
- Name: ST_USE_LAX_ON
- Value: X
- User: <Empty >
- Inactive: <Empty >
Check the notes below:
#1169688 New Features in Release 7.0 (SP14)
#1162160 CX_ST_MATCH_ELEMENT in XML INBOUND processing
Regards
Mark

Upgrade PI system from NW 7.0 SP18 to NW 7.0 Ehp 2 SP08

Hello Experts,
We want to do an upgrade of our PI systems from NW 7.0 SP18 to NW 7.0 Ehp 2 SP08 and I would like to know the impacts / effects it will have on the exisiting interfaces in the system ( we use most of the standard adaptors ) from an application point of view.
In other words Im looking for some guidelines or things to check once our basis team does this upgrade other than checking if all the interfaces are working fine.
Thank you in advance for your inputs.
Regards.

Any inputs on this post?
Thanks.

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2
IN EP 6.40 we have ESS/MSS 60.2.2,KM,NWDI ,IN BAck end we have ECC 6.0 .
COuld you let me what are the list of measures/Prerequisites i need to take before going for upgrade .

Hi,
You can upgrade your portal with all usages that you have installed. You need to check upgrade guide as well.
You need to check if there is any custom development on the portal to migrate it to new version.
Thanks
Sunny

UPGRADE THE PLM SYSTEM FROM NWBC 731 TO NWBC 740

     Hello,
     We want to Upgrade our PLM system from NWBC 731 to NWBC 740, for this it is better to have a SANBOX system to upgrade there first the NWBC740 and do some tests. And if everything is in order to Upgrade in the same time the DEV and TEST system?
     Do you now a better way to do such an upgrade?
     Thanks in advance,
     Florin Bosorogan

Hello Florin
Transporting across different BASIS releases is generally not a good practice and this is one of the main reasons why SAP insists on having the systems on the SAP landscape on the same release and patch level.
There shouldn't be a big gap in the time for starting the upgrade on the test system.
If the upgrade on the development system went fine then I would start the upgrade on the test system immediately.
I wouldn't basically let the development team transport the developments created after the development upgrade to the remaining systems in the landscape (especially production) until I complete the upgrade on the production system. The upgrade process is a planned activity.
Yes transporting a transport request across different releases is possible and SAP has their recommendations for that.
If there is a need to transport some emergency changes to the other system then it should done after consulting with the ABAP team about the possible impact on the system.
Regards
RB

I recently upgraded my Mackbook Pro ma operating system from OSX lion to Maverick, but in the process I can not access my iphoto 9.1.5. How do I access it?

I recently upgraded my Mackbook Pro ma operating system from OSX lion to Maverick, but in the process I can not access my iphoto 9.1.5. How do I access it?

Download the Mavericks version from the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

Upgrading system from 3.1c to 3.5 questionnaire

Similar Messages

Maybe you are looking for