Upgrading systems

If I am running v 10.6.8. on my MacBook Pro, can I upgrade to Mavericks for free?

Would help to post in Mavericks forum or in MacBook Pro after including the year and model you have.
You didn't upgrade to Lion in 2011-12 or 10.8.5 after that.
Mountain Lion Upgrade is here:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Check here:
http://www.apple.com/support/osx/mavericks/
Upgrade from OS X v10.9 Mavericks to OS X Yosemite
If your Mac can run OS X Mavericks, it can run OS X Yosemite.
Back up your Mac.
Get OS X Yosemite from the Mac App Store.
Double-click Install OS X Yosemite to begin installation.

Similar Messages

HT5527 Dear Apple...I know time marches on but unfortunately you have become useless to those of us who can't upgrade systems or afford Iphones. So my itunes is totally unavailalbe since ipods can't work w/Itunes 9, so all the $ I spent is out the window!

Dear Apple...I know time marches on but unfortunately you have become useless to those of us who can't upgrade systems or afford Iphones. So my itunes is totally unavailalbe since ipods can't work w/Itunes 9, so all the $ I spent is out the window! I have been an apple mac user since the Blue Tower in early 2000. The fact that I recently replace a stolen Ipod Classic and it isn't compatible w/iTunes9 is really screwed up. You have failed many!

What is your question?

How to upgrade system from serial communication to parallel communication

Hi,
I am working on Lab VIEW 8.5.In my project I am using ADAM cards(7) for analog/digital inputs/outputs. Communication is done via RS 232 serial cable. Right now my system is working fine, but if i want to make it more fast i will need to use parallel communication right? Because Simultaneous inputs and outputs are processed. How much my communication file will change? Which card i should use?
How to upgrade system? On which factors it depends or it affects? I need guide lines.
Thank you
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Hi
In your setup you have a ADAM 4250 RS232/485 repeater talking with 7 instruments in a network. Each instrument have a unique address, and you can only address 1 instrument at a time. If you need more speed you have to insert more ADAM 4250 units in your system and more RS232 ports on the PC. Identical ADAM instruments may receive commands over the same communication line, but transmit data on a unique communication line. You can not use the parallel port in your setup at all. This is not a Labview problem but a hardware problem. If speed is critical maybe the Ethernet I/O Modules: ADAM-6000 series are better for your setup
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

After OS Upgrade, System Preferences won't recognize audio input/output.

When I got an iPhone, I had to upgrade to OS 10.5.8, as well as upgrade Safari (to 4.0.3) and iTunes (to 9.0.1) for everything to run smoothly, and it does.
However, since I went though the motions last week with these upgrades, System Preferences or Utilities doesn't want to recognize my audio input/output jacks. It won't recognize when I plug in my stereo or my headphones. I hook up my computer to my stereo all the time to listen to music in the living areas of my apartment, and now I can't because it isn't reading the jack.
Any suggestions? How can I get the system to fix this problem?

Check your Audio MIDI Setup settings.
These are user-to-user forums where everyday folk post questions and offer answers to each other. Apple does not contribute to this message board. None of us has any idea what Apple is going to do until they do it.
If you feel it's a "problem" did you post in the Product Feedback area?

After OS Upgrade, System Preferences won't recognize stereo jack output.

When I got an iPhone, I had to upgrade to OS 10.5.8, as well as upgrade Safari (to 4.0.3) and iTunes (to 9.0.1).
Since I went though the motions last week with these upgrades, System Preferences doesn't want to recognize when I plug in the output jack for my stereo.
I hook up my computer to my stereo all the time to listen to music in the living areas of my apartment, and now I can't because it isn't reading the jack.
Any suggestions? How can I get the system to fix this problem?

Obviously, I know it has to do with my computer.
The reason I posted in the iPhone forum is because I am sure there are many other people who have had to upgrade software on their iMac to support the iPhone, and have subsequently had the same audio loss I have.
Apparently, such relevance is lost on you, although I'm not sure how it could be;-)
Thanks for your concern, in any case.

Want to upgrade system RAM of preserio V 6500 presently it is 1 GB only (512 x 2)

want to upgrade system RAM of preserio V 6500 presently it is 1 GB only (512 x 2)

Hi:
Below is the link to the service manual for your notebook:
http://h10032.www1.hp.com/ctg/Manual/c01295079.pdf
Please see chapter 1, page 2 for how much, and what type of memory you can install.
I recommend you install PC2-6400 memory, since the processors can run it at 800 Mhz instead of 667 MHz, which is all that PC2-5300 can run at.
Paul

Upgrading system with abs

Is there some way to upgrade system with abs in the same manner as pacman -Su does?

Maybe "yaourt" is something you're searching for.
It's in AUR. With it you can search fo packages in repositories and AUR at same time, in colors
Well, to upgrade packages that have newer versions (so, ye just upgrad ) you can do the following then
yaourt -Sybu --aur
This will upgrad your whole system to newest package versions including the AUR and with using PKGBUILDS for current,extra repositories.
cheers,
detto

AS 70SR2 (WP's) stops when connecting to upgraded system.

Hi,
I have installed an application server (NW7.0SR2) for our new ECC60 sandbox, which is upgraded from 4.6C. The AS and the DB server are on 2 different hosts.
When I try to start the AS it seems to work but the processes dies. The AS server is 64bit W2K3 ENT SP2 R2 with 12GB RAM.
I would really appreciate some input:)
Here are the trace files dev_disp and dev_w0
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        S23
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    179
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        2808
Fri Oct 03 12:39:57 2008
kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2808) [dpxxdisp.c ; 1285]
shared lib "dw_xml.dll"; version 179 successfully loaded
shared lib "dw_xtc.dll"; version 179 successfully loaded
shared lib "dw_stl.dll"; version 179 successfully loaded
shared lib "dw_gui.dll"; version 179 successfully loaded
shared lib "dw_mdm.dll"; version 179 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 36000
Fri Oct 03 12:40:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c ; 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >dksnss23ap3_S23_01                      <
DpShMCreate: sizeof(wp_adm) 11024 (1224)
DpShMCreate: sizeof(tm_adm) 5283968 (26288)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D7B0050, size: 5941072)
DpShMCreate: allocated sys_adm at 000000000D7B0050
DpShMCreate: allocated wp_adm at 000000000D7B1C90
DpShMCreate: allocated tm_adm_list at 000000000D7B47A0
DpShMCreate: allocated tm_adm at 000000000D7B4800
DpShMCreate: allocated wp_ca_adm at 000000000DCBE880
DpShMCreate: allocated appc_ca_adm at 000000000DCC2F00
DpShMCreate: allocated comm_adm at 000000000DCC4670
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DD4B2F0
DpShMCreate: allocated gw_adm at 000000000DD4B370
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DD4B3A0
DpShMCreate: allocated wall_adm at 000000000DD4B3B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Oct 03 12:40:02 2008
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( dksnss23) [dpxxdisp.c ; 12408]
DpStartStopMsg: send start message (myname is >dksnss23ap3_S23_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c ; 1050]
Fri Oct 03 12:41:02 2008
ERROR => DpWPCheck: W0 (pid 1680) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W2 (pid 720) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x89 --> 0x88
ERROR => DpWPCheck: W4 (pid 2212) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W5 (pid 1908) died (severity=0, status=0) [dpxxdisp.c ; 15534]
ERROR => DpWPCheck: W6 (pid 1136) died (severity=0, status=0) [dpxxdisp.c ; 15534]
my types changed after wp death/restart 0x88 --> 0x80
ERROR => DpWPCheck: W8 (pid 888) died (severity=0, status=0) [dpxxdisp.c ; 15534]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:12 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Oct 03 10:41:12 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     1680 Ended         no      2   0        0
1 DIA     2152 Ended         no      1   0        0
2 DIA      720 Ended         no      2   0        0
3 DIA     2556 Ended         no      1   0        0
4 DIA     2212 Ended         no      2   0        0
5 DIA     1908 Ended         no      2   0        0
6 BTC     1136 Ended         no      2   0        0
7 BTC     1284 Ended         no      1   0        0
8 BTC      888 Ended         no      2   0        0
Dispatcher Queue Statistics Fri Oct 03 10:41:12 2008
===========================
--------++++--
+
| Typ |    now |   high |    max | writes | reads |
--------++++--
+
| NOWP |      0 |      2 |   2000 |     11 |     11 |
--------++++--
+
| DIA |      5 |      5 |   2000 |      5 |      0 |
--------++++--
+
| UPD |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| BTC |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| SPO |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events       total    11, udp     9 ( 81%), shm     2 ( 18%)
since last update total    11, udp     9 ( 81%), shm     2 ( 18%)
Dump of tm_adm structure: Fri Oct 03 10:41:12 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Fri Oct 03 10:41:12 2008
=============================
Slots: 300, Used: 1, Max: 1
--------++--
+
|   id | owner        |   pid    | eyecatcher |
--------++--
+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:17 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >dksnss23ap3_S23_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2812) (SOFT_KILL)
Stop icman
killing process (2764) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2812 HANDLE:512)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2812 HANDLE:512)
wait for end of icman
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:19 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2764 HANDLE:520)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=545
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Oct 03 12:41:20 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2764 HANDLE:520)
DpStartStopMsg: send stop message (myname is >dksnss23ap3_S23_01                      <)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Oct 03 12:41:21 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c ; 12754]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 524 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 524 (pos=2)
SiSelNRemove: removed sock 524
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 17)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 524
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2808) [dpxxdisp.c ; 10952]
Good Bye .....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Oct 03 12:40:02 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\S23\D01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\S23\D01\exe\dboraslib.dll' is "700.08";, patchlevel (0.107)
B New connection 0 created
M sysno      01
M sid        S23
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    179
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        1680
M
M kernel runs with dp version 241(ext=110) (@(#) DPLIB-INT-VERSION-241)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c ; 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11024 (1224)
M DpShMCreate: sizeof(tm_adm) 5283968 (26288)
M DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F7B0050, size: 5941072)
M DpShMCreate: allocated sys_adm at 000000000F7B0050
M DpShMCreate: allocated wp_adm at 000000000F7B1C90
M DpShMCreate: allocated tm_adm_list at 000000000F7B47A0
M DpShMCreate: allocated tm_adm at 000000000F7B4800
M DpShMCreate: allocated wp_ca_adm at 000000000FCBE880
M DpShMCreate: allocated appc_ca_adm at 000000000FCC2F00
M DpShMCreate: allocated comm_adm at 000000000FCC4670
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000FD4B2F0
M DpShMCreate: allocated gw_adm at 000000000FD4B370
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000FD4B3A0
M DpShMCreate: allocated wall_adm at 000000000FD4B3B0
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Fri Oct 03 12:40:03 2008
M ThInit: running on host dksnss23ap3
M calling db_connect ...
C Prepending D:\usr\sap\S23\D01\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c ; 438]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App       : disp+work.EXE (pid=1680)
When      : 10/3/2008 12:40:3.953
Threads   : 2
Computer Name       : DKSNSS23AP3
User Name           : s23adm
Number of Processors: 2
Processor Type: AMD64 Family 15 Model 65 Stepping 2
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id bf8
--> (FAULT) Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
0000000006bdf7f0 000000001003be46 000000001015b000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
0000000006bdf860 000000001000397d 0000000006bdf8b0 dboraslib!_tailMerge_OCI_dll
0000000006bdf8c0 00000000100208a8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2823)]
0000000006bdfa90 0000000001241037 0000000006bdfd80 dboraslib!DbSlConnect [dbsloci.c (1860)]
0000000006bdfce0 000000000124146e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
0000000006bdfd50 000000000124462e 00000000ffffffff disp+work!supply_con [dbcon.c (3835)]
0000000006bdfd90 0000000001236e6c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
0000000006bdfdf0 00000000004cb61f 00000000094d4ba4 disp+work!db_connect [dblink.c (422)]
0000000006bdfe80 00000000004dd569 0000000006c5cb7d disp+work!ThInit [thxxhead.c (1442)]
0000000006bdfeb0 000000000042f93b 000007ffe3920000 disp+work!ThStart [thxxhead.c (1142)]
0000000006bdfee0 000000000040109d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1164)]
0000000006bdff10 000000000199e0c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000006bdff70 0000000077d5964c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
0000000006bdffa0 0000000000000000 000000000199df50 kernel32!BaseProcessStart
State Dump for Thread Id 63c
--> Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
000000000d79fe40 0000000077d5f691 0000000006c1e1a0 ntdll!NtFsControlFile
000000000d79feb0 00000000018886df 0000000000000000 kernel32!ConnectNamedPipe
000000000d79ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000d79ff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000d79ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Fri Oct 03 12:40:04 2008
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M    pid = 1680
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server dksnss23ap3_S23_01 on host dksnss23ap3 (wp 0)
M * ERROR       ThSigHandler: signal
M *
M * TIME        Fri Oct 03 12:40:04 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          11
M * MODULE      thxxhead.c
M * LINE        10754
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c ; 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c ; 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c ; 333]
M return from clean-up function ...

You said your "AS server is 64bit",,, but the error on dev_w0 talks about Kernel32...
Maybe thats the problem
0000000006bdf720 000000001003c72a 0000000000000003 kernel32!PulseEvent
Regards
Juan

[SLOVED] All my USB not work after upgrade system.

Hello all,
I'm new in Arch, and i install my system with your LiveCD (2005).
In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
What i can to do to fix this?
My dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x23f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 23F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf564000 (usable)
modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
modified: 00000000bf600000 - 00000000bf602000 (usable)
modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
modified: 00000000bf603000 - 00000000bf60b000 (reserved)
modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
modified: 00000000bf615000 - 00000000bf63e000 (reserved)
modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
modified: 00000000bf681000 - 00000000bf800000 (usable)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023f800000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcda0] fcda0
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-000000023f800000
0100000000 - 023f800000 page 2M
kernel direct mapping tables up to 23f800000 @ 18000-22000
RAMDISK: 37c44000 - 37e19ab8
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf60cf80 00040
ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 023f800000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
#3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
#4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
#5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
#6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
#7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
#8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
#12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf564
0: 0x000bf600 -> 0x000bf602
0: 0x000bf681 -> 0x000bf800
0: 0x00100000 -> 0x0023f800
On node 0 totalpages: 2092659
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765725 pages, LIFO batch:31
Normal zone: 17892 pages used for memmap
Normal zone: 1290780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
Booting Node 0, Processors #1
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#2
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#3 Ok.
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
Brought up 4 CPUs
Total of 4 processors activated (26499.22 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [io 0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1878k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
software IO TLB at phys 0x979e000 - 0xd79e000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1304838033.699:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15956
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata1.01: 234441648 sectors, multi 16: LBA48
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: limiting SATA link speed to 1.5 Gbps
ata2.00: limiting speed to MWDMA2:PIO3
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2: EH complete
pata_via 0000:03:00.0: version 0.3.4
pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_via 0000:03:00.0: setting latency timer to 64
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb2 sdb3 sdb4 < sdb5 >
sda: sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb5): mounted filesystem with ordered data mode
<30>udev[901]: starting version 167
Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
Thanks a lots.
Last edited by KingYes (2011-05-08 11:03:55)

FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is "10-evdev.conf" was the file I needed. Check both these files exist.

Error when executing a query on upgraded system

Hi All,
We are in the process of upgrading our BI system. Currently we are on Quality system and its a copy of existing production system. I have executed a query on the production system (3.5 system) successfully.
But the same query when I'm trying to execute on the upgraded quality system (BI 7.0), I get an error " warning info provider was changed or activated at runtime. The query cannot be opened". The same message doesn't pop up on the current 3.5 BI system.
Can anyone help me how I can correct this error?
regards,
Suman

Hi All,
I activated the Infoset and I could eliminate the error. Now the issue is solved.
Thanks

Backend error message when changing old PO's in upgraded system

Hi,
We upgraded our SRM system from 5 to 7.1
The issue we are facing is that fir all OLD PO's in the system,which were created before the upgrade,if we change the price or delete service lines in PO,then an error message is displayed "Backend error:Purcahse ordre still contains faulty items".
Has anybody come across this issue?
NOTE: This happens only for old PO's in the system.

Did you click on the error message to see the error details?
Thanks,
Prashanth

Upgrade System Center Operations Manager 2007 R2 CU6 -- 2012 RTM issues (Assembly related exception in log)

Hi guys
I am currently performing a distributed, complex upgrade with a customer:
4 management servers (1 being RMS), both databases (OM & DW) on a single SQL Server (2008 R2 SP2)
We moved over the RMS role to another server and decomissioned the old one due to it being a 2003 server.
Then we upgraded all non-RMS management servers.
We had some issues with them as well (same error in the log), but when we reinstalled the 2007 R2 binaries & patches and redid the upgrade it came through fine.
The RMS however keeps throwing the same error. Things I tried:
- Full clean of the server including momclean and msizap, then reinstall the RMS and retry the upgrade
- Reregister of the msiexec server
I am suspecting some issues with assemblies and / or GAC, but no clear proof on that, only that it crashes after performing assembly operations.
Below an extract from the RemoveMOMServer.log (the error occurs when uninstalling SCOM 2007 R2)
Can anyone help out or give me some pointers on possible causes?
Many thanks in advance!
MSI (s) (F4:CC) [15:43:55:259]: Executing op: UpdateEstimatedSize(EstimatedSize=0)
MSI (s) (F4:CC) [15:43:55:261]: Executing op: ProductCPDisplayInfoRegister()
MSI (s) (F4:CC) [15:43:55:263]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommit,,)
MSI (s) (F4:CC) [15:43:55:264]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommit,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (F4:CC) [15:43:55:266]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitUninstall,,)
MSI (s) (F4:CC) [15:43:55:266]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitUninstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,CustomActionData=C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe uninstall "Microsoft.EnterpriseManagement.OperationsManager,
Version=6.0.4900.00, Culture=neutral, PublicKeyToken=31BF3856AD364E35"€500€C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe uninstall "Microsoft.EnterpriseManagement.OperationsManager.Common, Version=6.0.4900.00, Culture=neutral, PublicKeyToken=31BF3856AD364E35"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe
uninstall "C:\Program Files\System Center Operations Manager 2007\Microsoft.EnterpriseManagement.UI.Foundation.dll"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe uninstall "C:\Program Files\System Center Operations Manager 2007\Microsoft.EnterpriseManagement.UI.ConsoleFramework.dll"€500€C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe
update /queue€500€C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe update /queue€500)
MSI (s) (F4:CC) [15:43:55:268]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitInstall,,)
MSI (s) (F4:CC) [15:43:55:268]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitInstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (F4:CC) [15:43:55:270]: Executing op: ActionStart(Name=PublishFeatures,Description=Publishing product features,Template=Feature: [1])
MSI (s) (F4:CC) [15:43:55:270]: Executing op: FeaturePublish(Feature=MOMServer,,Absent=3,Component=@+h863e0NAgaZ7OoE1)HM[lp(tNC_AUZ$SF(D`%aFTE9fFyfs=F=$JG3?U4%Jg+a[OgIJ9l,ltBUJ6}nEPr^ulwB]8CeSrDJOg^Dv6-5{b^j}@^?vz.j7,3M6C%7,*@eo93k8pr6&&N9$znhtI3,f=ds,sbkr{FsK5s,aat+W9Luq^c2T)%]NK-`Nh95Q?1j(Dg@M-ujVqmWklfnQ9{a+G7w.5xHY-FhkL+vZAB~5y'c@}'jr8WIsm`xe=5orHD{+mjmr3jr^W2UX?7PmxUa@v*Z]~U%@4u.j?-mBUeMsh74(}?767KRj@A72,VR{&Ndp=1kRf[ZQAWW2Vmir6O-EYNi`aVy0=sY*I`g=~^zgj-K41CWIAn3+(O4}ZvX8=hVDIvD^A&7iGA]RjL$JKo'QVT)b@Y@NcD-awAKEm,xN7,?,Ad7cW2b8}K?@`XVc]R`h8k*+PKa=CULr]CV`GY24=J**5wT+^.,Yw,vNCs'_A95dR?W8yIC[JXIm!nzq@5?Enk}PZewbi(r&t1H!94?5m0NzSd96@yq+0'^.?}G.RFEU^J@e`)a-_.e4@W?a@,yfmDTR]^+cbWf.=hV2Lk`!5yfUciqXO0JF?wIvuYFC{LBr*ENyKNMv9@3O~EdzJ!$jxy*dl]uq8{j_GLM1aC_g[-UdCQiC90o{ZS=lW(WUciqXme3eSKW@5fYZQ*R{[[yk0@XZAwJAUIK=yaPrb5j3zZII9*^7LD'L6,,V{p7-suLJ?`v(5R1a5&ko,1X$zkt~8Ic75fYZQ*RaE1v.2pOX8dqQ4PWI)'Vx5^d6cT~W@m1M]xA+z~*JWKX5swUG9JO-4h}&rH2H%obQfhOk?@2$kky4Qx]3yC3vPpLx@bP%U&2$(719F%lc[~}z8HzR.HDHZ)c]{SAz-boA9DSkLX$,eI5Tm1KmpVu+AzEhUp4Ka@(9k~3kSgQX@N@a@gaH@B-,TlvgYR`J9ET02Ay.r4F*v&OktBzm?8g^(@8)Udj
MSI (s) (F4:CC) [15:43:55:273]: Executing op: ActionStart(Name=PublishProduct,Description=Publishing product information,)
MSI (s) (F4:CC) [15:43:55:273]: Executing op: CleanupConfigData()
MSI (s) (F4:CC) [15:43:55:273]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=0,Remove=0)
MSI (s) (F4:CC) [15:43:55:276]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=1,Remove=0)
MSI (s) (F4:CC) [15:43:55:280]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=80035200)
MSI (s) (F4:CC) [15:43:55:280]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager,fileVersion="6.1.7221.99",version="6.0.4900.00",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",
AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:280]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:281]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:289]: Verifying accessibility of file: Microsoft.EnterpriseManagement.OperationsManager.dll
MSI (s) (F4:CC) [15:43:55:291]: Using source file security for destination.
MSI (s) (F4:CC) [15:43:55:304]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:304]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:305]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:306]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:306]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:307]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:308]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:308]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:310]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:55:310]: Entering MsiProvideAssembly. AssemblyName: Microsoft.EnterpriseManagement.OperationsManager, Version=6.0.4900.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL, AppContext: , InstallMode: -4
MSI (s) (F4:CC) [15:43:55:310]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (F4:CC) [15:43:55:312]: MsiProvideAssembly is returning: 1607
MSI (s) (F4:CC) [15:43:59:483]: Internal Exception during install operation: 0xc00000fd at 0x0000000077C24EDC.
MSI (s) (F4:CC) [15:43:59:483]: WER report disabled for silent install.
MSI (s) (F4:CC) [15:43:59:483]: WER report disabled for non-console install.
MSI (s) (F4:CC) [15:43:59:483]: Internal MSI error. Installer terminated prematurely.

Thanks for you updating! For SQL related issue, please post on the following forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Regards,
Yan Li
Regards, Yan Li

After upgrade System fail to boot

Hi,
few days ago I did the system upgrade and after reboot i get several errors and the system doesn't boot, the first one in the list is:
FATAL could not load "/lib/modules/3.0-ARCH/modules.dep" no such file or directory
I think the problem is that in my /lib/modules/ dir there is no /3.0-ARCH dir but there is the 3.1.4.1-ARCH and the 3.1 extramodules.
why that? Is this problem coming from the upgrade?
also the network is not recognized
and the RAID disks are not mounted
the only thing I found on internet is this article:
https://bbs.archlinux.org/viewtopic.php?id=129970
but I cannot downgrade because the pkg dir is empty and I cannot connect to internet for get it
can you please help me?
thanks

I found something maybe useful...
in the dmesg I found that the boot disk is loaded as sdc but, I'm sure it was sda before the upgrade.
in the menu.lst there is
- title Arch lunix [/boot/vmlinuz.linux]
- root (hd0,0)
- kernel /vmlinuz-linuz root=/dev/sda3 ro
- initrd /initramfs-linux.img
do you think that changing something in this I can have back my boot partition?

Adobe Creative Suite 5 / Upgrade System Windows Vista to Windows 7

Dear customer service,
I am a customer of Adobe as I bought two years ago the Adobe Creative Suite 5.
My system is still Windows Vista. Now I wanna buy the Microsoft Home Office 2013 and now I have to upgrade from
Windows Vista to Windows 7.
My question is if there will be any problem with the Adobe Creative Suite 5? Or can I only put in the upgrade CD,
leave the Creative Suite on my pc and have nothing else to do than just installing?
Thank you for your reply.
With best regards,
Nicole

Correct. You only need to run the CS5 installer and have to provide the pertinent serial numbers in the process. Just make sure you run Help --> Deactivate bevor nuking your Vista install and reformatting your drive. If there are issues during the install, ask in the Download, Install & Setup forum.
Mylenium

Error opening Word File in Upgraded System using FM gui_download.

Hi Everyone,
We are unable to open the .doc or .xls file when we download them on the local PC using gui_download.
The system has been recenlty upgraded from a 4.6 to ECC 6.0 system. Has anyone faced such an issue and can provide some inputs regarding how to proceed on such an issue.
Thanks & Regards,
Rohit Sharma

Hi,
Did you the use the GUO_download using the following values:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename         = fullpath
    filetype         = 'ASC'
    codepage         = space
    write_bom        = 'X'
TABLES

How to Upgrade System HDD on a T43?

Hi everybody. I'm new here, so forgive me if this has been asked and answered already. I've searched the forums and the KB, and haven't found quite the answer I'm looking for.
Is there a good, step-by-step guide for upgrading the system hard drive on a T43? I've seen a lot of valuable discussion about avoiding the dreaded 2010 error, which I'll take to heart in selecting a new drive; but I haven't seen a guide that tells me, for instance, how to clone an image of my old C: drive onto the new one, so that my OS and applications will work. I understand how to do that on a desktop machine (i.e., I don't know how, but the instructions I've found on the web make sense to me); only I don't know to what extent I can use those instructions on the T43. I don't have the system installation disk (bought the computer used), so I'd like to avoid having to reinstall the system. I also don't have an Ultra Bay HDD, but I do have a CD burner.
Getting back to choice of new drives, and that pesky 2010 error, most of the discussion of those topics on these boards seems to be a few years old. Has anything changed since 2008? Is there a current list of replacement drives that will run (with or without monkeying with the BIOS) in a T43? (The list I found here seems to date back to 2009 at the latest.)
I realize I'm dealing with an outdated computer to begin with, and I have a more modern one. I just want this one for basic word-processing, email, and web-surfing when I'm on the road; but the slow speed and limited storage of the 40GB HDD are inconvenient, and I'd like to do what I can to supe it up a little.
Thanks for any advice!

Any drive that you buy new today will throw the "2010 error".
Samsung HM160HC would be my preferred choice.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822152110
That being said, I've been running non-approved drives in T43/p units for years with no ill effects. YMMV.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Upgrading systems

Similar Messages

Maybe you are looking for