Upgrading the APEX version 4.0.1.00.03 to 4.0.2.00.07

Hi All,
We need to upgrade current apex version 4.0.1.00.03 to 4.0.2.00.07.
I am new to Apex applications , so quite have few doubts:
1.Does database downtime is required for upgrade. In readme its stated that only APEX_040000 is updated , but I m not sure if the database will be restricted mode during upgrade?
2. Is procedure same for Database versions 10gR2 and 11gR2 (our version is 11gR2).
3.Also have plan for 11.2.0.2 upgrade , is it affect Apex applications?
Thanks in advance.
Vishal

NOT really possible to go backwards from 4.x to 3.s. Your best option is to try and find a backup and try and install it and make required changes to meet current version. Why, may I ask is your production environment in 4.x and your development in 3.2? This sounds TOTALLY dainbramaged to me, since I would NOT want to work in such a mixed environment.
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned..

Similar Messages

I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden

I upgraded the Pages version on my iPad and iPhone some weeks ago. The App has not synced previous data on both AND it's unstable on both. Luckily I didn't upgrade on my Mac where the old version is working ok! What to do??

I upgraded the Pages version on my iPad and iPhone some weeks ago. The App has not synced previous data on both AND it's unstable on both. Luckily I didn't upgrade on my Mac where the old version is working ok!

You need the new versions of both to sync data between them. If you don't have the new versions on your Mac, they will not sync.
BTW, the new versions do NOT overwrite the old on Mac. When you install them, the old versions are retained.

I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?

I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?

In other words, the upgrade process did not go altogether well and the device has lost all its contents. When you plug it in, they will be restored from the backup.

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

Probably a setting. Look at the manual.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Managing and upgrading multiple APEX versions & environments

It is possible I've overlooked this upgrade ability but I have two APEX instances; 1) 3.2.1 multiple apps and 2) 4.0.1 multiple apps. Can I upgrade/migrate JUST ONE app from my 3.2.1 instance to the 4.0.1 instance? I guess my question is can I upgrade individual apps or do I have to upgrade the complete APEX install; therefore all apex apps running out of that install are ALL upgraded? Exporting an app out of the 3.2 install and importing into the 4.0.1 instance generates some error indicating incompatible export file. I hope I don't have to install a separate interim database with 3.2, import the app, then upgrade it to 4.0.1 and export for each app. Thanks for any advice or setting me straight with known limitations of this flexibility I desire.

Hi,
Apex applications exported out of one version and then imported into a later version are generally supported. Perhaps you could supply the exact error message and someone may recognise the issue.
Regards
Andre

I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation

We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox. When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date. The
version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?

Note that I have not tested either of these and they will not be supported by Microsoft.
1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
(you'll have to re-distribute the client package after this).
OR
2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
</Item>
<Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
  <Applicability Platform="ALL" OS="ALL">
   <Skip>Embedded</Skip>
  </Applicability>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

HT202358 The Support page contradicts itself! How do I upgrade the later version of my iPhoto Library?

TELL ME IF THIS DOES NOT CONTRADICT ITSELF?
iPhoto '11 or later: About the Library Upgrader
You might see this message in iPhoto: "To open your library with this version of iPhoto, it first needs to be prepared." If you do, you can use the iPhoto Library Upgrader tool to prepare your library to work with the current version of iPhoto.
The iPhoto Library Upgrader is a tool that prepares libraries from iPhoto '08 (v7.x) or earlier so that you can upgrade them with the current version of iPhoto. If your library is from iPhoto '09 (v8.x) or later, you don't need to use this tool.
THEN HOW DO I UPGRADE MY LATER VERSION??

Ok I will - There is No contradiction at all - Notice the CONDITIONAL STATEMENT
You might see this message in iPhoto: "To open your library with this version of iPhoto, it first needs to be prepared." If you do, you can use the iPhoto Library Upgrader tool to prepare your library to work with the current version of iPhoto.
If you do not see that conditional statement then your library will simply be upgraded with no additional software required
Exactly as the quote you posted says
The iPhoto Library Upgrader is a tool that prepares libraries from iPhoto '08 (v7.x) or earlier so that you can upgrade them with the current version of iPhoto. If your library is from iPhoto '09 (v8.x) or later, you don't need to use this tool.
Really simple - if you have iphoto '08 or earlier backup your into library and download and run the iPhoto library upgrader and then launch the new iphoto to finish the upgrade - If you have iphoto '09 or l simply backup your iphoto library and launch the new iphoto to do the upgrade
LN
PS simple standard text questions are much preferred without crazy fonts and point size changes

Upgrading the report version from Crystal Reports 10 to Crystal Reports 11 without REDESIGN

Post Author: Chakradhar
CA Forum: Upgrade to XI 3.0
HI All, Please provide a solution for this.. Is there any way to upgrade the version of a report without redesigning the report? If we upgrade the report without redesign, dont we lose the special features of the new version? Actually i want to the change the report version from Crystal Reports 10 to Crystal Reports 11. Thanks..

Post Author: rodneyaz
CA Forum: .NET
I'm having the same issue. Worked fine for me in XI, but stopped working when I upgraded XI to XI R2.
Please post a follow-up if you get this resolved! Thanks!
RodneyAZ

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

Why I can't import iMovie into Apple Configurator without asking me for more codes. If iMovie is free, and I upgraded the latest version and to Yosemite.

Previously, our school bought a number of codes for iMovie. One of our MacAirs that supervises some iPads through Apple Configurator showed that it was free. However, another Mac Air did not saying that I needed to import more codes. I upgraded everything, software, iMovie in iTunes, and Apple Configurator. Everytime I upload iMovie into Configurator it shows I only have 2 codes, while on the other MacAir, it shows it as free.

Can I import photos from iPhoto ('08; 7.1.5) into latest version of Aperture without upgrading my iPhoto to the iPhoto '11 version?
To elaborate a bit on TD's answer:
You can import only folders of images or selected image files that have been exported from older iPhoto libraries, not the libraries themself.
Aperture 3.4.5 cannot work with iPhoto Libraries that have not been upgraded to iPhoto 9.4. or later at all:
You cannot open them in Aperture:
And you cannot import them as a library to create an Aperture library from the older iPhoto Library.
Without upgrading to iPhoto '11 your only option would be to export your original images and the edited versions from iPhoto '08 and to import the folders of images into Aperture. That would be a lot of work, a waste of disk space, and break the lossless workflow. You will clutter your Aperture library with duplicates (version and edite image) that are no proper original-version pairs.
For a smooth transit from iPhoto to Aperture I strongly recommend to bite the bullet and to upgrade to iPhoto '11 to upgrade your iPhoto libraries to the new version 9.4.3 to preserve all the previous work - albums, books, ratings - you have done in iPhoto.
Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Regards
Léonie

I upgrade the last version of firox and I restared my pc but the worning sign still there Whay ?

Hi : I having this problem for a while in my home page I have a wornig about upgrade my firox version and I did it !! after that I restared my computer and I still having the same sign , why ? what I should do to correct this matter ?
Thank you for your support.

See Empty/corrupt library after upgrade/crash.
tt2

Proble upgrading the new version for ipod 4G

I need help to get my ipod touch 4G upgraded to the new version 4.3.2. The page in iTune keeps giving me the message that the network connection timed out and couldn't download the software. I have high speed with comcast and never lost tne connection. I don't know what to do

Hi Yudna: You may need to temporarily disable your firewall and Anti-Virus software.
Stedman

Error Message " please upgrade the latest version of isync"

hello,
have download a isync software from nokia website, but when i am trying to install the error message ask me to upgrade my isync. Problem is i try many times on software update but there is nothing to be update. My current Isync software version is 3.0.2.
FYI, i have try to remove my current isync then install new one but still does not work.
Please help

Make sure the iSync application is in your main Applications folder, not in any sub-folder. You should never move Apple apps from their default locations.

Upgrading the APEX version 4.0.1.00.03 to 4.0.2.00.07

Similar Messages

Maybe you are looking for