Upgrading the CSA on hosts

IS there a clean upgrade of the client from 4.0.3 to 4.5? Does the v 4.0.3 client need to be uninstalled before 4.5 is installed?
Same question for 4.5 to 5.0? How evasive are these client upgrades?
Thanks,
CB

Please refer to the Migration section in the ?Installing Management Center for Cisco Security Agents? document found here:
http://www.cisco.com/en/US/products/sw/secursw/ps5057/products_installation_guide_chapter09186a00805aebef.html#wp1000164
Copied from the guide:
??If you're installing CSA MC V5.0 on the same machine running V4.5 or V4.0.x, an xml file containing V4.5 or V4.0.x configuration items and several .dat files containing host information are automatically generated by the installation and ready for importing once the install is complete.
?If you're installing CSA MC V5.0 on a different machine from the system running MC V4.5 or V4.0.x, after installing V5.0, you must copy and manually run an executable file on the V4.5 or V4.0.x machine to create the xml and dat files needed for importing V4.5 or V4.0.x configuration and host information to V5.0. ?
As far as upgrading the CSA agents on the systems, uninstallation is NOT necessary. Installing V5.0 on top of V4.X should be smooth as Tom said.
You can either download and run the agent kit on the target system, Schedule a Software update from the V4.0.x or V4.5 MC server (after running prepare_40_migration.exe on that server), or use SMS or other technologies to install the new V5.0 agent package.
Hope that helps :)
Faisal

Similar Messages

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

I plan to upgrade the SSRS 2005 SP2 enterprise edition in our internal web server to 2005 SP4, the Reporting server database is hosted in another sql server in sql server 2005 SP4. Do I need to do anything on the reporting server database side?

My question is what the steps do I need to take to upgrade SSRS from 2005 SP2 to SP4. The web server that host the SSRS is in 2005 SP2, and the OS is in window 2003.
Our SSRS report server and report server database are in different servers. The SSRS in the web server is in 2005 SP2 enterprise edition, the report server database is in sql server 2005 SP4 enterprise edition.
To upgrade the SSRS in web server from 2005 sp2 to sp4, do I need to backup/restore the encryption key? Nothing will be changed in the report server database. We will still pointing to the same database in the current server, all
I wanted to do is performing a inplace upgrade of SSRS from 2005 SP2 to SP4.
Any response will be greate appreciated. Thank you!
Li-hui Chen

Hi Lihui Chen,
According to your description, you want to install the Services Pack 4 for SQL Server. Right?
In SQL Server, Services Packs are used for fixing issues of current version product. It's not an Upgrade, you don't have to backup/restore your encryption key. You just need to download the Service Pack 4 on:
Microsoft SQL Server 2005 Service Pack 4 RTM . Please make sure you have administrative rights on the computer to install SQL Server 2005 SP4. For more information, see links below:
How to obtain the latest service pack for SQL Server 2005
List of the issues that are fixed in SQL Server 2005 Service Pack 4
SQL Server 2005 SP4, KBA 2463332, Installation Issues
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

My iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194

my iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194 ... now my phone is not working ... every time an error 3194 ... I can not update ios and drop naturally I do not Pogue. hosts cleaned, cut off the antivirus ... did everything I recommend in this case ((what do I do? (
on other machines the same ...

Some additional suggestions here that may help if you haven't tried them:
http://support.apple.com/kb/ts4451
Regards.

How to upgrade the fwsm image from 3.1(10) to 4.0(8).

Hi all,
I need to upgrade the fwsm image from 3.1(10) to 4.0(8). Can i do it directly from 3.1(10) to 4.0(8) ?
Do i need to upgrade other image also along with Firewall version 4.0(8)?
FWSM# sh ver
FWSM Firewall Version 3.1(10)
Device Manager Version 6.1(5)F
Compiled on Mon 21-Apr-08 17:43 by fwsmbld
FWSM up 2 days 15 hours
failover cluster up 2 days 15 hours
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 8.0.0 @ 0xc321, 20MB
0: Int: Not licensed : irq 5
1: Int: Not licensed : irq 7
2: Int: Not licensed : irq 11
The Running Activation Key is not set, using default settings:
Licensed features for this platform:
Maximum Interfaces : 256
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
Serial Number: SAD125004FT
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration last modified by enable_15 at 18:58:52.627 IST Mon Jan
11
2010
Regards
Madhu

Application partitiion is what you will be upgrading from 3.1.(10 to 4.0(8).
MP - maintenance partition is supposed to be 2.1.2 or above which is the same requirement for 3.1.x so, you will be good there.
Pls. check the compatibility with the swtich code in this 4.0.8 Release Note link:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
Pls. check the chassis system requirement in the above link.
commands you will need are:
copy tftp flash:image
copy tftp flash:asdm
falsh:image for OS and flash:asdm if you will be upgrading the asdm as well.
-KS

Migrating 9.2.0.1 to 10.2.0.3 on the same server/host:OS=Windows/VMWARE

I am migrating data and performing an upgrade from 9.2.0.1 to 10.2.0.3 on the same VMWARE virtual hosts. Each host is a production host. The customer does not have test, QA, or development environments or hardware either virtual or otherwise to support testing or QA. I have to migrate directly to an Oracle 10.2.0.3 database and product on their production Virtual hosts currently running a single 9.2.0.1 instance and database. They are running Windows 2000 SP4 on two of the production VMWARE hosts and Windows 2003 on the other production VMWARE host.
They desire for me to upgrade their production 9i database on the same virtual host. This is my plan and wanted to know if this makes sense or is feasible in Oracle 10g:
1. Inform all users of the PROD database that it will not available until upgrade/migration is complete. (one PROD database is 30GB large, another is 100GB large. I will do the 30GB upgrade/migration first on the PROD1 VMWARE host then perform the second 100GB upgrade/migration on the PROD2 VMWARE host). Sequentially not simultaneously.
2. Perform Backups: Create a full export of the 9i production databases. Create full backups using RMAN. Create cold backups of all 9i database files from the PROD databases. If possible, take a VMWARE image of the Oracle 9i homes and oradata files and then shutdown the Oracle 9i database when ready to start the install of Oracle 10g and finally import and migration of 9i data to 10g 10.2.0.3.
3. Shutdown all 9i services on the production VMWARE host, which I will call, PROD.
4. Install Oracle 10.2.0.1 in a separate Oracle 10g home on PROD.
5. Patch Oracle 10.2.0.1 home to 10.2.0.3 using OUI interactive mode of the patch.
6. Create a 10.2.0.3 database using the Database Configuration Assistant (10.2.0.3).
7. Create necessary tables spaces and user accounts that the 9i export will be expecting on the 10.2.0.3 database. (I will take counts and metrics of 9i DBA_OBJECTS, V$VIEWS and row counts of all tables, views, etc before shutting down the 9i databases to compare once the 10g 10.2.0.3 import has completed). I will also create DML scripts of all the 9i tables spaces, user accounts, roles and profiles. I need to confirm if the 9i database(s) are running OLAP and contain materialized views as well and prepare the new 10g databases for this as well.
8. Execute imp utility 10.2.0.3 using the dmp file from the 9.2.0.1 export.
9. Execute required migration scripts to the 10.2.0.3 database using the scripts contained in rdbms/admin as documented in the 10g Upgrade manual and the 10.2.0.3 patch notes. Compile INVALID objects, etc.
Questions I have are:
1. Will I still be able to run the Oracle 9.2.0.1 database on the same host as the newly installed/migrated Oracle 10g 10.2.0.3 database? They will have different database names. I will be using the new Oracle 10g LISTENER. I will shutdown or disable the Oracle 9i LISTENER. I can set the ORACLE_SID and ORACLE_HOMES to point to either the 9i database or the 10g 10.2.0.3 database depending on which one I want to run.
2. Is this possible or will the Oracle 10g install and patch install corrupt the 9i home or the Windows 2000 (SP 4) registry to where I can no longer run the 9i (9.2.0.1) database on the sam Virtual Host as the Oracle 10g 10.2.0.3 database?
3. Will Oracle 10g Grid 10.2.0.3 agent be able to monitor both the Oracle 9.2.0.1 database and the Oracle 10.2.0.3 database listening on the Oracle 10.2.0.3 LISTENER on the same PROD host?
Sorry for the large thread but this has been the migration/upgrade from hell and the first production upgrade/migration has not been going well. The Oracle Upgrade Assitant running in 10.2.0.1 failed and corrupted both the Oracle 9i home and the Oracle 9i data. I recovered by creating a new Oracle 10g database and using export/import to get the last good export of the corrupted 9i database over to the new Oracle 10g database. Luckily I have recovered the 9i data and most of the objects in a new Oracle 10.2.0.1 database and is now running in production and I am performing the final patch and upgrade to 10.2.0.3 on this database.

Are you saying the notes are incorrect?
No, I wasn't commenting on that at all. I was just saying that DBUA is the recommended way of upgrading databases... and that's in spades if you're talking about 100GB databases.
I'll lay odds that DBUA to 10.2.0.1 and then patching to 10.2.0.3 is quicker than exporting and importing 100GB of data.
(Applying a 10.2.0.3 patch is done with opatch and doesn't require a fresh installation of Oracle. A patch mostly just modifies the data dictionary: it's finished in minutes, not hours).
My real point: these sorts of questions are incredibly easy to ask, answer, discard, re-ask, modify, mull over and basically experiment with in a virtual environment.
And again: it's utterly bizarre why you wouldn't have physical access to this database (and keep in mind that I can't keep in mind little nuggets of information such as this one which you didn't see fit to share earlier!)
It's in a virtual server. Virtual servers can be zipped up and emailed! (OK, maybe not 100GB... but I've shipped a small hard disk in a zip-lok pack envelope half way round the world before now -though obviously it wasn't critical to have the contents of that envelope available for use all the time... Still, it sounds to me like here's a technology (virtualisation) that's not being properly exploited).

Is it possible to upgrade the Mac Pro with SCSI/SAS drives?

Hi guys I am considering to move on to a Mac Pro from my old PC.
The Mac Pro enclosure is quite unique in its hard drive holders as no cables are used and all drives are connected with a plugin mechanism.
So I am curious if that will allow me to upgrade to a SCSI/SAS storage system which requires cable connections between drives and the SCSI/SAS card on the PCI-E slot. I dont know if this will be possible with the Mac Pro enclosure.
Has anyone tried to do this？
Btw is there any Ultra320 or SAS(preferably) interface card available for Mac OS X?

The connectors for SATA drives can be used with SAS drives. However, the controller needs to be SAS compatible. I have never installed a SAS drive in the Mac Pro bay to see what happens. If some one has a SAS drive and wants to try this I would be interested in the results.
My guess is that the Mac Pro would not see the drive.
Areca sells the Mac Pro PCIe bootable ARC-1680 SAS controller in several configurations. This controller allows the user to utilize SAS or SATA hard drives connected to the card. The ARC-1680x comes with two external mini SAS connectors that can support eight direct connect hard drives or up to 128 devices (in theory) when used with SAS expanders.
The ARC-1680LP has one internal mini SAS port and one external mini SAS port. I looked at the Mac Pro internal SATA connectors and they can unscrew from the frame but there is only about 1/2" of clearance in that area of the case. In addition, I would want the hot swap bays to still operate and I did not see an easy way to patch into the existing SATA connectors. It would be nice if the Mac Pro factory connectors used snap on SATA connector on the back of the backplane so that users could interface the 4 SATA bays with an internal PCie controller. However, its hard wired in the existing configuration. With the new Mac Pro PCIe RAID 5 card on the market there must be alternative connectors that allow this type of installation to work properly.
Based on the ease at which the Areca SAS controller can be added as an external using the ARC-1680x I went with that option. I am using it with eight direct connect SATA hard drives now. I plan to expand the storage by adding a SAS expander in the form of a hub or an enclosure with SAS capabilities. I have been looking at a 16 bay SAS enclosure but I am not sure how loud it will be
Details on the ARC-1680 can be found here:
http://www.areca.com.tw/products/pcietosas1680series.htm
Its very cool to have SAS or SATA capability along with a bootable card that can support tons of hard drives and RAID levels 0, 1,1E, 3, 5, 6, 10, 30, 50, 60 or JBOD . I booted the Mac Pro with a 2TB Mac OS X 10.4.10 RAID 6 volume and ran Xbench. It shows a 400MB/sec. hard drive setup and raises the overall Xbench score substantially.
While I doubt I will boot the Mac Pro from the RAID 6 volume much, it is very cool that that function is available. This is the only PCIe host adapter I have found with boot capabilities besides Apples new $999 4 port SATA internal card. SAS has lots of expansion capabilities. Users that want pretty much unlimited hard drive connectivity will enjoy the new ARC-1680x.
Have fun!

HT1379 My macbook pro 2013 is running to slow even when I am using the keyboard, it running with a delay. I upgraded the memories to 8gb but still slow what can i do to fix it.

Good morning I am confronting serious problems with my Macbook pro 2013, that is runing to slow, even when I am writing this email is running with some kind of delay. I upgraded the memories to 8gb but still running slow . Please let me know what I can do to solve the problem. Thanks in advance. Fernando

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

SharePoint 2007 performance issue after upgrading the operating system

We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
184
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
341
text/html; charset=us-ascii
iexplore:15344
185
302
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
196
text/html; charset=UTF-8
iexplore:15344
186
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
341
text/html; charset=us-ascii
iexplore:15344
187
200
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
105,487
private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
text/html; charset=utf-8
iexplore:15344
188
401
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
341
text/html; charset=us-ascii
iexplore:15344
189
200
HTTP
sp07.ourcompany.com
/_layouts/images/prevbuttonltr.gif
76
max-age=31536000
image/gif
iexplore:15344
190
200
HTTP
sp07.ourcompany.com
/_layouts/images/nextbuttonltr.gif
78
max-age=31536000
image/gif
iexplore:15344
191
200
HTTP
sp07.ourcompany.com
/_layouts/images/day.gif
1,051
max-age=31536000
image/gif
iexplore:15344
192
200
HTTP
sp07.ourcompany.com
/_layouts/images/month.gif
1,068
max-age=31536000
image/gif
iexplore:15344
193
200
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
28,814
max-age=31536000
text/css
iexplore:15344
194
200
HTTP
sp07.ourcompany.com
/_layouts/images/week.gif
1,057
max-age=31536000
image/gif
iexplore:15344
195
200
HTTP
sp07.ourcompany.com
/_layouts/images/weekbox.gif
149
max-age=31536000
image/gif
iexplore:15344
196
200
HTTP
sp07.ourcompany.com
/_layouts/images/alldayDefault.gif
157
max-age=31536000
image/gif
iexplore:15344
197
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttntoday.gif
146
max-age=31536000
image/gif
iexplore:15344
198
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttn.gif
95
max-age=31536000
image/gif
iexplore:15344

Hi
when you request a Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
Check the link which can give more input
http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
for error 401 you can check this link
http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
and check SharePoint ULS logs and event viewer for any exceptions.
Please mark the Answer and Vote me if you think that it will help you to resolved your issue

[Forum FAQ] How to upgrade the Linux Integration Service

Symptom
When you move a Linux guest virtual machine from the legacy system to Windows Server 2012 R2 Hyper-V host, you may face the incompatibility issues. The most common problems are that the mouse pointer maybe a little inaccuracies, the guest VM cannot use the
dynamic memory.
Cause
The cause may be that the integration service not compatible with the Windows Server 2012 R2 Hyper-V host.
Solution
We need to upgrade the integration service to at least version 3.5.
In this demo, we use the CentOS 5.8_x86_x64.
You can refer to the following steps to perform the upgrading.
1. Before install the Integration service you can use the following command to check the version of the installed Integration service. (Figure 1)
#su root
#/sbin/modinfo hv_vmbus
Figure 1: check the version of the installed Integration service
2. Download the Integration Service 3.5 image from here.
http://www.microsoft.com/en-us/download/details.aspx?id=41554
3. Insert the Integration Service 3.5 image.
a. Open Hyper-V Linux guest VM console.
b. Click-> Media->DVD Drive-> Specific the Integration service image location, insert Disk.
4. Mount the image.
If automount is enable, the Integration service image will be mounted automatically. If not, please use the following command to mount the image. (Figure 2)
#mount /dev/cdrom /media
Figure 2: Mount the image
After that, we can see the image content. (Figure 3)
Figure 3: Imange content
5. Upgrade the integration service.
Use the following command locate to the current Linux Distribution Directory. In this example, we select the RHEL58. (Figure 4)
#cd RHEL58
#./upgraee.sh
Figure 4: Locate the Linux Distribution Directory
When you see the message, "Linux Integration Service for Hyper-V has been upgraded. Please reboot your system", it means the upgrading is finished.
6. Reboot your Linux system. (Figure 5)
Figure 5: Reboot the system
7. Confirm the upgrading.
After Linux boots up, use the following command to check if the upgrading is succeed. (Figure 6)
#/sbin/modinfo hv_vmbus
Figure 6: Verify the upgrading.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

May be you should write a WIKI article on same.

The vm and host networking components failed to negotiate protocol version '4.0'

Hi,
I have the problem that when I start a VM with windows server 2012 on a hyper-v v2 host, it takes very long till the VM get bind the static or dynamic ip adress. I tried both, static and dynamic. In every case I see at the event viewer the following error:
the vm and host networking components failed to negotiate protocol version '4.0'
After a few minutes the VM gets bind the IP an everything works fine. But at the next time I reboot the machine the same failure appear.
Trying to use legacy network adapter results in the same problem. After this I tried to export the vm to a hyper-v v3 host. At first boot time
the problem didn't appear and the vm get's bind the ip adress without problems. Then after upgrading the integration services to hyper-v v3
version the same problem appears but without register it in the event viewer.
Does anybody know how I can fix this problem?
Kind Regards,
Marcus

Hi,
A MS KB records an issue when you run Windows 8 or Windows Server 2012 based Virtual machine in Windows Server 2008 or in Windows Server 2008R2:
http://support.microsoft.com/kb/2744129
There is a Microsoft update in this KB, you may install this KB in your Windows Server 2008 R2 and check the result.
While about this issue after you migrate the guest VM to Windows Server 2012 host, will it still has such error message after you remove all network adapters of the guest VM?
Install Windows update for the Hyper-V host, after that upgrade Integration service for the guest VM again to check the result.
For more information please refer to following MS articles:
"Unsupported configuration" warning when you run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
http://support.microsoft.com/kb/2737297
Hyper-V Overview
http://technet.microsoft.com/en-us/library/hh831531.aspx
Lawrence
TechNet Community Support

TS3694 My IOS is 4.3.5 and i have jail broken the iPhone and now i want to remove the jail brake and update my IOS to 6.1.2 and i cannot upgrade the software or restore the software, i keep getting the 3194 error and i even tried to while in DFU mode, sam

i have tried to upgrade the software and i get the 3194 error message, i have tried restoring and i got the same error and i also tried while in DFU mode and still got the same 3194 error message.
I really want to remove the teathered jail break and upgrade the software so if anyone knows how to get that done please let me know i would really appreciate it.
Thanks in advance

http://support.apple.com/kb/ts3694#error3194
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

The VM and host networking components failed to negotiate protocol version '5.0'

I have been searching for a fix for this issue for sometime.
The VM and host networking components failed to negotiate protocol version '5.0'
and
The VM and host networking components failed to negotiate protocol version '4.0'
this error have been posting on the host server 2008 R2, with a hyper-V running server 2012 R2, which is the eval version vhd from Microsoft.
I have tried the patch on the server 2008 R2 host and the nic delete and rescan option with varied reboots and such between each step of the process just to try every possible combination.
The error persists. Are there any other suggested solutions for fixing this problem. Also the drivers have all been updated along with the system firmware.
thanks,

The hotfix states Server 2012 in the VM. You stated Server 2012 R2 in the VM. MSFT is very precise in this language - Server 2012 != Server 2012 R2.
Two distinctly different releases of Windows Server.
In this case the N = the running release of Hyper-V. In this case your Hyper-V Server at release version 2008 R2.
The +2 = the current version of Windows. In this case that is 2012 R2. Two releases ahead of the version of the hypervisor you are running.
I tossed in the link to Ben Armstrong's blog article as that is the ONLY (and still definitive statement) support statement regarding this configuration. He posted that article at my request after many folks posting in this forum with strange behavior
in this configuration.
"supported" in this context means that if you call CSS, you will be told the following: 'yes, you have errors in the event log. We will not fix that. This is an unsupported configuration. But that does not block the OS in the
VM running. If you want the errors to go away, we suggest you upgrade your Hyper-V Server to 2012 R2. That configuration is supported.'
That said, it can impact other functionality of the VM that rely on Integration Components in the VM and the Services of the hypervisor. There is most likely small things that will not work.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

My bos has ipad 2 with ios version 4. He had upgraded the ios become 5, suddenly his data was gone. Is the aome tools to recover his data.

hi,
introducing my name is Tahyan Tatah, you can call me Tata
My bos has ipad 2 with ios version 4. He had upgraded the ios become 5, suddenly his data was gone.
Is there any some tools to recover his data.
Thanks
Regards,
Tata
<Edited By Host>

No, it will still stay as IOS 7.0.4

Upgrade the app with new client ID

Hi,
I have registered ClientID from my site and used same client id while creating package for SharePoint provided host app. For some reasons my client got deleted from azure.
My app contains some azure service related calls.
Command I have executed to get the app principal id:
Connect-MsolService
get-MsolServicePrincipal
-AppPrincipalId
'<my client id>'
Error:
get-MsolServicePrincipal : Service principal was not found.
At line:2 char:1
+ get-MsolServicePrincipal -AppPrincipalId '<my client id>'
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OperationStopped: (:) [Get-MsolServicePrincipal], MicrosoftOnlineException
    + FullyQualifiedErrorId : Microsoft.Online.Administration.Automation.ServicePrincipalNotFoundException,Microsoft.Online.Administration.Automation.GetServicePrincipa
   l
Still I can able to view my id details from below site:
https://mysite/_layouts/15/APPPRincipals.aspx
Later I have registered with new client id and used the same in while upgrading
the app.
Still the service related pages are pointing to old IDs.
Can't we change the app client ID while upgrading the app?
Thanks,
Surya

- Go to Settings>Store and make sure are signed into your account. Then try to update your app. Make sure you update only your app, not update all.
- To update the other app you will have to sign into that account.
- If there are apps that need updating that were purchased form more than one account you have to update them one at a time until the remaining apps were purchased by one account.

Upgrading the CSA on hosts

Similar Messages

Maybe you are looking for