Upgrading the Hard Drive for better performance?
hello i have the new 17 inch macbook pro i couldn't wait to special order from apple so i settled with the stock model from the apple store. I am looking into buying a hard drive that runs at 7200rmp. i was wondering if it is possible to buy the exact drives that they put into the mbp? it is really important that the hard drive is best quality i can get. i want the seagate momentous 500gb @7200 but they are not available anywhere i look. I also have been reading that seagate drives tend to fail. Does anyone know of a really good hard drive that i can buy?
is a ssd going to be that much better in terms of performance? i manly do video editing and music creation with my mac.
so my question is what is the one of the bes hard drive for my unibody macbook pro that will be fast and reliable?
thanks
I too am suspect of Seagate drives. If you want a 500 GB, 7200-rpm drive, I would wait for another manufacturer to introduce one.
I think that Hitachi drives are your best bet. They have been proven very reliable, and Apple has been using them a lot in their new products. I have noted links to some good ones for you to check out.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822145228
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=10008894
Read this article before you invest in SSD.
http://lenovoblogs.com/insidethebox/?p=141
Similar Messages
-
Is there a 'how-to' anywhere about upgrading the hard drive?
Hi Guys,
I'd quite like to upgrade the hard drive in my 24 inch 3.06GHz iMac to 2TB. Is there a step-by-step 'how to' available anywhere or has anyone done it successfully?
I've done laptops on many occasions but the iMac has a difficult looking case to crack!
Thanks
RichHi mate,
Haha, no I have no preconceptions about firewire! My iMac has a 400 and an 800. The 800 is connected to a Sony DV video deck and the 400 is connected to a RAID drive that is then daisy-chained to another external firewire and a Wiebetech bare hard drive device that I just swap out various hard drives to for clients.
I suppose I should really be looking at a tower, but I sold a G5 Quad to downsize to the smaller footprint iMac and have been happy with it's performance - but the new ones have more space and more RAM capability - it's just a shame they don't have the connectivity options of even this iMac.
Cheers
Rich -
HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS
No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton -
Do I need an OS Disc to restore my macbook after I upgrade the hard drive?
I need to upgrade the hard drive in my 2009 macbook. I have a Time Capsule. I'm not clear on whether I need to install OS on the new drive using a disc, or whether I can do that from the Time Capsule? The issue is that my disc drive is broken, and I don't really want to replace it as I never use discs in it anyway. But i don't want to get stuck with a new hard drive and be unable to get an operating system on it.
I prefer this process:
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.
However, you could simply reinstall OS X on the new drive after prepping it, the restore all your files from your Time Machine backup.
Hard to say what if any other options there may be since you haven't told us what version of OS X is in use and backed up to your Time Capsule (and if it is a full system backup.) -
I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.
There are many online tutorials on how to change out the HD on a mid 2007 iMac. One of the originals is from 2007 and is Upgrade your iMac 20" or iMac 24" aluminum (mid 2007) to 1TB Hard Drive and 4 GB RAM - DIY Guide. As far as migrating your system Apple helps out with that in Setup Assistant which automatically starts when you turn on a new Mac for the first time. After you have installed the new HD you will have to format the new HD to Mac OS Extended (Journaled) and then you will have to install OS X. The first time you turn it on Setup Assistant will start. Follow the directions and you will be fine. In order to restore your information you will need to backup what is on the current internal HD first. I'd recommend using Time Machine (Assuming you are using Leopard or later) AND also creating a bootable clone using either SuperDuper or Carbon Copy Cloner.
Please complete your profile so at the very least we know what version of OS X your machine has installed. -
Hi, I bought the macbook pro 15 3 months ago. I wanna upgrade the hard drive to 128G ssd drive. How much I should paid?
Qingfeng wrote:
Hi, I bought the macbook pro 15 3 months ago. I wanna upgrade the hard drive to 128G ssd drive. How much I should paid?
Well you won't have very much storage capacity with a SSD that small, also SSD has limited writes, so it wouldn't be good for on-loading and off-loading a lot of files.
SSD isn't being securely erased due to steps to prevent their premature wear, so despite what you do in Disk Utility Secure Erase, your confidential data can still be recovered if you pass the machine on to someone else for instance.
Other than those reasons, small SSD's can be extremely fast, loading your programs and OS much faster. But the real benefit in high speed storage is transfering large amounts of files on/off the computer to ANOTHER fast device. This comes in handy for video and large music collections and so forth.
Since the SSD because of it's limited writes doesn't fit the bill as a large file transfer medium.
If you want to get a SSD drive, you can upgrade it yourself simply by ordering one online at locations like Other World Computing or NewEgg and have a 00 micro phillips head screwdriver handy.
There are instructions over at iFixit for opening your MacBook and replacing the hard drive with the SSD.
Preferably you will want to clone your present boot drive to a external drive using Carbon Copy Cloner, then making the switch and hold option to boot from the clone and then clone from the external to the new internal SSD drive.
Prices of SSD are varied, Apple won't replace it for you
This is currently the fastest SSD availalbe
http://www.harddrivebenchmark.net/hdd.php?hdd=OCZ-VERTEX3+MI -
My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya! -
Do I need to use all the hard drive for time machine or can I partition it
Do I need to use all the hard drive for time machine or can I partition it
You cannot partition a TC disk.
See pondini about mixing data and backups.. but remember this.. the TC has no way to back itself up and TM cannot backup files on the TC. Anything not backed up on the TC will be lost at some future point.
http://pondini.org/TM/TCQ3.html -
I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!
1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331) -
Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook, and wiping the hard drive for a complete reset.
A PowerBook G4 can't run Snow Leopard OS 10.6, however, it can run Leopard OS 10.5. But you must use a retail (black) Leopard install DVD.
What does the selling of your MacBook have to do with installing Leopard on your PowerBook?
Cheers, Tom -
I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?
You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
If you have another Mac, you may be able to use FireWire target disk mode.
If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility. -
I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help
Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
Then, install OS X. -
What is the best way to replace the Inline Views for better performance ?
Hi,
I am using Oracle 9i ,
What is the best way to replace the Inline Views for better performance. I see there are lot of performance lacking with Inline views in my queries.
Please suggest.
RajWITH plus /*+ MATERIALIZE */ hint can do good to you.
see below the test case.
SQL> create table hx_my_tbl as select level id, 'karthick' name from dual connect by level <= 5
2 /
Table created.
SQL> insert into hx_my_tbl select level id, 'vimal' name from dual connect by level <= 5
2 /
5 rows created.
SQL> create index hx_my_tbl_idx on hx_my_tbl(id)
2 /
Index created.
SQL> commit;
Commit complete.
SQL> exec dbms_stats.gather_table_stats(user,'hx_my_tbl',cascade=>true)
PL/SQL procedure successfully completed.
Now this a normal inline view
SQL> select a.id, b.id, a.name, b.name
2 from (select id, name from hx_my_tbl where id = 1) a,
3 (select id, name from hx_my_tbl where id = 1) b
4 where a.id = b.id
5 and a.name <> b.name
6 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=7 Card=2 Bytes=48)
1 0 HASH JOIN (Cost=7 Card=2 Bytes=48)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
3 2 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
4 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
5 4 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
Now i use the with with the materialize hint
SQL> with my_view as (select /*+ MATERIALIZE */ id, name from hx_my_tbl where id = 1)
2 select a.id, b.id, a.name, b.name
3 from my_view a,
4 my_view b
5 where a.id = b.id
6 and a.name <> b.name
7 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=1 Bytes=46)
1 0 TEMP TABLE TRANSFORMATION
2 1 LOAD AS SELECT
3 2 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
4 3 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
5 1 HASH JOIN (Cost=5 Card=1 Bytes=46)
6 5 VIEW (Cost=2 Card=2 Bytes=46)
7 6 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
8 5 VIEW (Cost=2 Card=2 Bytes=46)
9 8 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
here you can see the table is accessed only once then only the result set generated by the WITH is accessed.
Thanks,
Karthick. -
Has Apple ever fixed the fan issue that results from upgrading the hard drives on 2009-2010 iMacs?
Has Apple ever fixed the fan issue that results from upgrading the hard drives on 2009-2010 iMacs?
My CPU fan defaults to 3000RPM. I can rev the fan higher with 3rd party Fan controllers, but no lower than 3K.OR you can short out the original temp sensor, to make the fans rev at quieter speeds.
You can also install an optical temp sensor in place of the old one, it will still read temps and adjust the fans accordingly, just not as good as an internal sensor.
Use something like this:http://www.ebay.com/itm/New-922-9229-Cable-Temp-Sensor-Optical-iMac-27-inch-Late -2009-2010-/111106349896
Another fan speed control app you may be interested in: http://exirion.net/ssdfanctrl/
Good Luck! -
The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. a Samsung SSD). When I try to re-install the Mac operating system, I come to the part of the installation instructions where you are asked to choose a disk to install the software. However, there is no disk listed in the selection screen. Why is there no disk in the selection screen?
Welcome to Apple Support Communities
You haven't formatted the SSD, so you can't install Mac OS X.
First, close the OS X installer and open Disk Utility. Then, choose the SSD at the top of the sidebar, go to Erase tab, choose "Mac OS Extended (Journaled)" as "Format", and press Erase. Finally, close Disk Utility and reinstall OS X. See > http://pondini.org/OSX/DU1.html
Maybe you are looking for
-
Error in MSS PEOPLE RELATED FORM IVIEW
Hi Expert, I am getting an error in MSSonline formPeople related. Once I am selecting the radio button of the particular employee name and clicking on it ,it showing the error like (because of hyper link in each and every employee
-
Hi, I have installed JDK1.4 on Windows NT4.0. The path where the "javac" and "java" are is "D:\jdk1.4\bin." I have added this directory to the PATH variable. I have no problem when executing "javac" from any location(Directory) where as its reporting
-
My iphone is no longer activated, It worked for three weeks. I can't get the server to work. On hold with Verizon for almost an hour and half and got disconnected.
-
Hi, I'm having trouble eliminating this grey fill box in the middle of my blank background. It must be from the wire frames that I created for this website, but I can't figure out why it won't go away. If you look on the right side of this screen sho
-
SQL 2008 R2 Management Tools Install Fails - The specified account already exists
Hello, The installation SQL 2008 R2 Management Tools on a Windows 7 workstation fails with the error, The specified account already exists. Below is the Summary Log. Thanks. Paul Overall summary: Final result: SQL Server installati