Upgrading the IOS with bin file

Hi Everyone,
Need to confirm if ios has bin file only and no tar image then we can not use the archive command while using FTP to download the new ios.
We can delete the old ios first and then upgrade the ios with copy ftp command right?
Regards
Mahesh

I am asking about WS-C4503 with Supervisor II+TS.
For chassis-based systems, all you need is copy the BIN file into the bootflash.
Make sure you compare the MD5 hash value of the BIN file you got against the MD5 hash value found in the Cisco website.
If it doesn't match, don't use it!
Here's one way of checking:
1.  Hover your curser above the filename and under the heading "MD5 Checksum" you get the value of "b6e127f2c74cfcae94e871376771e522" for the version you are going to use.
2.  Copy the BIN file into your bootflash and run this command:  verify /md5 bootflash:cat4500-ipbasek9-mz.122-53.SG.bin b6e127f2c74cfcae94e871376771e522
By the way, 12.2(53)SG?  You sure?  This version is classed as "Deferred" due to some bugs found.  

Similar Messages

  • I can not upgrade the iOS on my phone, nor sync the phone because the process starts with backing up the phone which always hangs up at the backing up stage and then will not allow further progress.

    I can not upgrade the iOS on my phone, nor sync the phone because the process starts with backing up the phone which always hangs up at the backing up stage and then will not allow further progress.
    And for this I guess that it is the backing up of my Podcasts - which are free downloads that causes the hang up. These are items that I have played and synced before without issues. I am thinking this way because these are Podcasts that I used to play but sundenly would not play on my iPhone. Each time I try to play anyone of them it generates the message - this movie could not be played.
    I am scared of atempting a system restore because I guess I may lose my SMS for the past two months. Please approach the solution from this point of view.
    Thanks
    Joe

    Please refer to this thread.
    https://discussions.apple.com/thread/3417041
    It may have something to do with one of your backup files that has been corrupted before.

  • I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

    How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
    Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
    Please re-submit your request using your official carrier domain.
    but this email is authorized, what to do??
                                                                                                              respectfully, Beba

    If you have forgotten then these links are the only way to resolve
    http://www.apple.com/support/appleid/
    As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
    OR have you recently purchased the iPhone secondhand ?

  • How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad?

    How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?

    Thank you!
    Disabling firewall and AV did the trick!
    Kudos.
    Alex

  • TS1394 how can i get upgrade the ios x v 10.5.8? I purchased an iphone 5 but cannot connect with my macbook 5. I cannot update itune 11 as my ios is not up to date

    how can i get upgrade the ios x v 10.5.8? I purchased an iphone 5 but cannot connect with my macbook 5. I cannot update itune 11 as my ios is not up to date

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    OS 10.6 Snow Leopard is once again available from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    To use iCloud you have to upgrade all the way to Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.

  • HT4623 Recently I want to upgrade the IOS for my iphone 4 with my friend's help. Unfortunately, we are unable to do it. Don't understand why?

    Recently I wanted to upgrade the IOS for my iphone 4 following the guidelines closely with my friend's help. Unfortunately, we are unable to do so. I felt disappointed as I am looking forward to installing Apps, WeChat, Whats App, etc. I have bought it 2 years ago. I have read the FAQ, mine is the same as many other complaints as in the Settings-General, no "Software Update" appear but we have follow step by step but failed to do so.
    My friend suggested me to visit Apple Store in Kuala Lumpur, Malaysia. I just wonder if this problem can be solved.  Kindly advise.
    Thanking you in advance.
    Regards/Michelle Gee

    You are following the wrong guidelines. The Software Update option was not introduced until a later version. You need to connect to iTunes to update if you currently have iOS 4 or earlier.
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/updating- ios#itunes

  • My bos has ipad 2 with ios version 4. He had upgraded the ios become 5, suddenly his data was gone. Is the aome tools to recover his data.

    hi,
    introducing my name is Tahyan Tatah, you can call me Tata
    My bos has ipad 2 with ios version 4. He had upgraded the ios become 5, suddenly his data was gone.
    Is there any some tools to recover his data.
    Thanks
    Regards,
    Tata
    <Edited By Host>

    No, it will still stay as IOS 7.0.4

  • HT1414 I am having ipod touch 1st generation with ios 1.1.5. I would like to know if I can upgrade the ios

    I am having ipod touch 1st generation with ios 1.1.5. I would like to know if I can upgrade the ios.
    If yes, how can I upgrade it.

    Are you using this link?
    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
    Where are you located?
    Try a different browser.

  • Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might  be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever,  and I don't want to throw good money after bad anyway.
    Thanks for your comments

  • I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now?

    I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now? I left it overnight with the white screen, thinking maybe it'll go away and needs time to upgrade. Woke up this morning, nope still white screen. Very disappointed with Apple. I was so excited to get my phone and can't even use it right now.

    First turn the iPhone off and back on and see if it works.  If that doesn't work then do a Reset by holding the Sleep / Wake Button (The Power Button) and the Home Button at the same time until the white Apple Logo appears, the release both Buttons and wait until a Full Reset occurs.  The iPhone 6 should come back to your Lock-Screen.  If that doesn't work then you could connect the iPhone 6 via the Lightning Cable to a Computer with a Current Version of iTunes.  Then open iTunes on the Computer and wait until your see a Button that represents your attached iPhone and click on it.  This should bring up a Summary Screen on the Computer within iTunes.  At that point your can choose Update Software if an Update is available or Restore the iPhone to Factory Settings / New In The Box, or you could try to Restore from your Backup if a current Backup had already been saved from a previous iPhone.
    If you don't have a computer with iTunes and you can get the iPhone back on, then go to Settings>General>Software Update and see if the iPhone is still on iOS 8.0 or if it is now on iOS 8.0.2

  • HT4113 After downloadeing and upgrading the IOS  to IO7 the iphone was locked with an unknown passcode  by itself !! What should I do??

    After downloadeing and upgrading the IOS  to IO7 the iphone was restarted and locked with an unknown passcode  by itself !! What should I do??

    Hello malsobhi,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Best of luck,
    Mario

  • I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    I want to show pictures from my iphone 4 on my television.  I have the cables but it will only show a few pics stored online, none of those on the camera roll.  Would it make a difference if I upgraded the ios to ios 7?

    1, iOS only works on iPhone, iPads or iPods. These drives were probably made with an operating system that preceeded OS X such as OS 7, OS 8 or OS9.
    2, No, the data on the Zip Drives is formatted for the Mac.
    3, If your reformat them then all of the data is wiped
    4, The problem would be that the PC can not read the files as formatted on the zip drive by the Mac
    5, There are services that might be able to migrate the data for you but I seriously doubt that Staples or Office Max can do it for you. The services that migrate data charge big bucks so be prepared to pay for it.
    Allan

  • I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?

    I want to upgrade the IOS of my Cisco 2821 from  Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
    Thanks

    CME is part of the IOS, so you can't upgrade the IOS seperately from CME.
    That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
    You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
    Brandon

  • HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
    Try disabling the computer's security software during the download and update.

  • I have a first gen iPad am I able to upgrade the iOS?

    I have a first gen iPad am I able to upgrade the iOS?

    You might, though, be able to keep using many of your apps in an older version that is compatible with ios 5.1.1.
    You might be able to use some older versions af apps. These links have information that can help you.
    http://9to5mac.com/2013/09/17/ios-app-store-now-allows-legecy-app-downloads-to-s upport-older-hardware-and-software/
    http://www.engadget.com/2013/09/17/apple-ios-last-compatible-version-app-iphone- ipod-ipad/
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
    Hope his helps.
    Please note on the third link apps does not have a space (a pps) but after it's sent, it sometimes shows shows a space.

Maybe you are looking for

  • Mac Mini slower performance after Mavericks upgrade

    I'm experiencing a severe performance degradation and all the suggestions in the discussions so far haven't helped (Verify/repair disk -no issues found, Safe Boot, reinstall Mavericks). Any Suggestions on what to try next?  Thank you!   Model Name:  

  • Possible to embed join logic in metadata somewhere?

    Do you know if Oracle Reports and Discovery allow us to create a schema for the end users to use so that they are not wandering around through the whole database when attempting to make reports? I am trying to figure out if we can embed some join log

  • Industry Solution - Apparel and footware Solution

    Hi Experts I am assigned to IS AFS ( Apparel & Footware) BI - BO project...i am not much aware of AFS implementation. Can any one help me the implementation prerequisities of AFS...wat are the key areas to be concentrated and data loading strategy,,.

  • Area charts vs stacked area charts

    Hello, Once again, I think that I have missed something. I can use the area chart component to create a chart with  2 series of data. It looks just like the one I created using the stacked area chart component. I would think that there would be some

  • Now that I've reinstalled Norton since upgrading to Windows 10 on Thursday, the

    I upgraded from Windows 8.1 to Windows 10 Thursday night.  I then downloaded Norton from the Comcast website after signing in with my Comcast account since the upgrade apparently did not carry over my Comcast provided Norton antivirus suite.  After a