Upgrading ThinkPad E420s, Choosing Memory and Solid State Drive

Hi All,
I want to update my ThinkPad E420s. Now I have 4 GB of memroy and 320 hard drive. I want to get 8 GB memory and a solid stated drive.
I want to verify that I have chosen components that will work with the laptop.
Will the memory and the SSD below work with E420s?
Memory: http://www.amazon.com/Crucial-PC3-10600-204-Pin-Notebook-CT2KIT51264BF1339/dp/B0067G1N34/ref=sr_1_1?...
SSD: http://www.amazon.com/Crucial-240GB-2-5-Inch-Internal-CT240M500SSD1/dp/B00BQ8RM1A/ref=sr_1_1?s=elect...
I used this article as a spec guide http://support.lenovo.com/us/en/documents/pd015793
Specifications for memory:
8GB max7 / PC3-10600 1333MHz DDR3
Non-parity
Dual-channel capable
Two 204-pin SO-DIMM sockets
Specifications for SSD:
Solid State Drive (SSD) / SATA 3.0Gb/s
128GB SSD, 2.5" wide, 7mm high
80GB, mSATA
Thank you!
Solved!
Go to Solution.

Hi Mihalych,
Sure I will provide you the link where you can check with our customer care for nearby service center for your region.
Please click here to visit the Lenovo support link and select your region to get the contact number.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

My Mac Book Pro has just had a new memory and solid state drive installed. After the installation, the Lightroom tools all became grey. There is no longer any color on the screen other than my picture. Even the color sliders are grey. Can you please help

My MacBook Pro just had a new memory and solid state drive installed. Since the installation, the Lightroom tools are now all grey. Even the color sliders are grey. Please help!

My guess is that your operating system got updated to Mavericks and that you are running an old version of Lightroom:
Sliders are white, look different | Mac OS X 10.9 Mavericks
Be aware of a Lightroom bug with color management in mavericks that makes shadows too deep in the Develop module: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" and Jao's photo blog: Further quantification of the Mavericks color management problem.

I am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

yes you can do it and not void the warranty. Those are the only hardware changes that Apple permits. Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.

T61 and Solid State Drive Upgrade -- Questions

Solid State Drive prices are going southwards, and I am tempted to explore the possibility of upgrading the existing internal hard drive with a solid sate one (as and when 128 GB SSD become available) in my T61.
My questions are:
1. Is it possible to upgrade to these devices?
2. Would there be any gain in battery life? How much is it likely?
3. Would there be any performance gain?
4. What are the pitfalls?
Sushil
Sushil
ThinkPad T61, (7658CTO), T7500, Integrated Graphics, 320 GB HDD, 3 GB RAM, 1 GB Intel Turbo Memory, Vista (32 bit) Business

Solid state drives have yet to become a worthwhile venture as their use in high end computing has not yet been proven. One of the biggest problems with SSD's is the fact that they cannot come to par with traditional drives in terms of random write speeds. Most people take a performance hit with these types of drives except for the exception of one company, which has gotten speeds up to traditional drive speeds.
However, sequential read and write speeds are marginally faster than traditional drives, which gives u a boost on boot, which is noticably faster. For most business users, the upgrade to an SSD will not yield any tangible results except when transferring bulk files back and forth, at which point one would notice a significant performance hit. Regarding battery life, the first time I used a SSD, it didn't help with battery life at all that was noticable. However, it was well worth the upgrade as it made the laptop literally silent and cool. It's surprising how much sound hard drives make these days ....
My two cents is that the SSD is really an expensive looks-only aesthetic mod but in terms of CG heavy users - not worth it yet unless you can run it in RAID 0 or 5 with 4+ drives, bringing performance quite up to par. At that point, a desktop machine running RAM drives from Gigabyte might even be better....
Message Edited by singularity2006 on 02-19-2008 03:48 PM
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro

Upgrade my Macbook Pro 17" with solid state drive and RAM?

My MBP is a 17" mid-2009, 2.8 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Graphics NVIDIA GeForce 9600M GT 512 MB.
I am an architecture student. I use 3D modeling programs like SketchUp, Revit, AutoCad, etc. According to these software websites, my MBP is sufficient. However, when I'm running these programs, I get the apple "beach ball" a LOT, along with a lot of lagging even when I'm working on simple models. After doing some research, it appears that upgrading my RAM to 8GB (my model's max capability) and buying a solid state drive would help my MBP run much faster and much cooler.
My questions:
1. What brand and exact product #/link to this (if possible) of RAM (2 x 4GB sticks) and SSD should I purchase?
2. Which SSD GB option should I purchase? I chatted with OWC online and was given this variety of SSDs.
http://eshop.macsales.com/shop/internal_storage/SSD/Mercury_Electra_3G_Solid_Sta te
3. I was also given this product bundle recommendation. It's cheaper than buying everything individually, but I'm not sure if I need the tools and I don't understand the purpose/advantage of having the "OWC Express Silver Enclosure".
http://eshop.macsales.com/item/OWC/YSSDMP240/
I just want my MBP to run as fast as possible while running my modeling software w/o spending an arm and a leg if possible. But I don't know if it's worth the trouble and expense to upgrade my current MBP, which I love, or just getting a new MBP or Mac desktop. And if I should just get another Mac, I don't know which one I should get.
Another thing I have seen is the Mac Mini. Is it possible to plug this or any other external device to my MBP in order to accomplish my performance goals without having to modify my MBP or buy another Mac?
This is the first time I've posted any help questions to the Apple Support Community. I really appreciate any advise you Mac experts can give me. I called one of the Apple Stores, but I was definitely not satisfied with the inexperienced rep's answers.
Thanks!

1. OWC or Crucial are recommended sources for memory. You can usually find a 5% off and free shipping code for Crucial on retailmenot.com. On crucial just key in your system information in their memory selector.
2. Your system likely supports SATA II speeds, so the SSD OWC pointed to would work. I installed one in our 2010 mac mini and it's working well. I originally installed their 6G drive however it ran at SATA I speeds. Turns out the 3G which is specd for SATA II is what was needed and works fine.
3. The OWC package they recommended includes a case to put your existing hard drive in. That helps to be able to transfer your data back to the SSD then you can use it as a backup drive or as an external storage device.

What's the difference between flash storage and solid state drive in MacBook Pro?

What's the difference between MacBook Pro with flash storage and MacBook Pro with solid state drive?

A SSD is packaged like any other notebook drive. Flash storage uses a different design and layout that connects directly to the motherboard using PCIe. It is faster than a normal SSD.
SSD vs HDD: What's the Difference? | PCMag.com
what are the differences between solid state drive and flash storage ...

Oracle RAC and Solid State Drive

Can we use Solid state Drive with Oracle RAC as a replacement to SAN?
Regards,
RJiv.

burleson wrote:
Hi,
Can we use Solid state Drive with Oracle RAC as a replacement to SAN?Yes, and it works especially great for RAC clusters:
http://www.rampant-books.com/t_rssd_12_removing_bandwidth_saturation.htm
BTW, SSD is now offered by Sun, EMC, and lots of other mainstream vendors, and the prices are falling rapidly:
http://www.dba-oracle.com/include_ssd.htm
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm
Don,
I know you and your company has done lot of research on (RamSan+Oracle RAC), but it will be nice if you can comment on (FusionIO+RAC) solution. I know no one has used it so far, but I think it is viable, so what do you think?
The reason why I think FusionIO is a good solution for small DBs because it's not a Flash Drive and it costs less than the other SSD solutions available in the market. Also you do not want to buy SAN for small DBs (<250 GB).
But I am too sure about the actual configuration at this point like - gigabit vs 10 gigi NIC, type of interconnect, Fiber Channel, etc.
So I would really appreciate if you can provide some insight.
Thanks in advance....
Disclaimer: I do not work for FusionIO - http://www.fusionio.com/

Creative Cloud to New Solid State Drive

Hello,
I am upgrading my mac mini with a solid state drive, although i already have Creative Cloud on my current harddrive. Will I be able to download Creative Cloud to my solid state drive from the same Creative Cloud account? Or will I need to subscribe to a new membership?

You should be fine to make a copy of your current setup onto a SSD disc, using SuperDuper:
http://www.shirt-pocket.com/SuperDuper/superduperdescription.html
I am going the same way as you soon, and got this description from the guys at Shirt-Pocket:
First, prepare the new drive (in a drive dock or similar) by partitioning it:
* Start Disk Utility
* Select the external drive hardware in the sidebar
* Click the Partition tab (if it doesn't appear, you selected the volume, not the drive hardware above it)
* Use Disk Utility's controls to divide the drive as needed, even as a single large partition. Use "Mac OS Extended (Journaled)" as the format type and name appropriately
* Click Options
* Choose the proper partition scheme (GUID for Intel macs, Apple Partition Map for Power PC) and accept the page
* Click Partition.
Then, make a full "Backup - all files" with "Smart Update" or "Erase, then copy" to the new drive.
Rename the drive to have the *same* name as the original.
Now, shut down and swap the drives.
Power back up -- you'll notice it'll take a while to start (it's looking for the original drive). When it finally boots, open System Preferences and select the new drive as the startup drive in the Startup Disk preference pane.
You will of ourse need to make sure that the amount of data on your current drive does not exceed the size of the SSD.
Ulf

XServe only sees internal solid-state drive.

Hello,
XServe only sees internal solid-state drive, doesn't not see any other hard drives. I currently have (3) 1 TB drives in each bay. Disk Utility only sees CD-ROM and solid-state drive.
Any ideas on how I can get it to see my drives?
Jeremy

Some more details would be helpful:
Are these the drives that shipped with the system?
Did they suddenly go off-line? Was it after some event?
Do you have a RAID card?
SATA or SAS drives?
What does System Profiler show?
And any other details that might be relevant.
=Tod
Thank for the reply, Tod. As far as I can tell, these were the drives that shipped with the system. The XServe was purchased 2 years ago, and only recently was it decided to bring it up. I tested the drives individually with a USB-SATA adapter and was able to see the drives on an iMac, so I know they aren't broken. I also was able to partition the drives using this method. System Profiler only mentions the CD-Rom and the solid state drive. The XServe does not have a RAID card and is not connected to an array. I even tried to boot off of cd, but the still couldn't been seen.
Thanks!
Jeremy

I have a MacBook Pro, 15-inch, Mid 2009. I would love to upgrade to a Solid State Drive. What is the best possible upgrade I can buy. I need the specs and even brand name. Thank you to anyone who can help.

I have a MacBook Pro, 15-inch, Mid 2009. I would love to upgrade to a Solid State Drive. What is the best possible upgrade I can buy. I need the specs and even brand name. Thank you to anyone who can help.

A 15" mid-2009 MBP RAM specifications are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
As has been pointed out, OWC is an excellent source for Mac compatible RAM. Crucial is another first rate source for Mac RAM. RAM from either vendor will work just as well as any purchased from Apple with the bonus of being less expensive and having a lifetime guarantee.
Ciao.

Where and what type of solid state drive should I buy for my early 2008 Mac Pro Desktop??

where can I buy and what type of solid state drive should I use to upgrade my early 2008 Mac Pro Desktop??

Rick,
When you get a chance.... DSLReports is off line: their SQL server decided to take its indexes and access to data. Power. Not enough of the right kind of UPS. Same happened to StorageReview's "Drive Reliability Database" about 8-9 yrs ago.
dslreports.com is offline
Fri Apr 20 09:05:55 EDT 2012
SSD: Loading CS5 plus other little monsters might matter.
Lots of small I/Os
latency of 1/100th where nanoseconds replace those "long" milliseconds
System: Small and fast.
DLLoyd even goes for short-stroking drives to get and maintain highest I/O
The new 10k VRs hit 200MB/sec - I still use them and still find them useful, long lasting, feel responsive with whatever I ask of them. I know they get criticized and "cost too much"
Just bought a new WD Black and yes it is better than the 2008 model I was using.
600GB 10K $200 vs $150-220 for WD Black. your choice
I can destroy a 7.2k drive, I have brought ever 10K drive back after a simple WD Extended Test in Lifeguard.
I don't really care about $$/GB or I wouldn't have just bought Intel 128GB $149
Database: the pros put the index in memory and page fix (virtual volumes in memory; cache; hold disk drive index in memory). Caching storage has been around for almost 40 yrs.
Today you can use SSDs as front end cache to hold DB indexes and frequent data for web servers and such adn use slower secondary storage.
SSD + SAS + 4TB storage
Separating the system from data: #1 must
Having data on array: been what I use
I put a large photo library on 2 x 10K VRs vs SSD and couldn't tell much difference (SSD is soundless of course) But my WD Blacks make as much noise and run 15*C hotter than those 10K (not what you expect?)
While 10K and 7.2K are in the 140-180MB/sec range, they are in 3.0 to 12.0 ms seeks, not 0.01 ms.
People wonnder why shrink a drive to 2.5" (or why not go down to 1.8".
How long does it take to reposition a disk head? how often? the 10K VR travels on outer tracks at 70 MPH. Really trying to fly off into space.
It uses one step to find the "zip code" and then another DSP to find the "house."
True of any high density perpendicular recording mechanism.
And of course while the Raptor-X tried to find a home with famers, Cheetah buyers, the WD 10K line has more of a home where servers and small form factor drives - and 100s of them - can fit in a rackmount server I imagine.
Anyway.... if SR and DSLReports can drop out of site due to power and hardware failure and loss... we can learn some and hope to protect our own data and investments.

Solid State Drive Upgrade Kit v300a with Windows 8.1 on Envy laptop

I am trying to install the Solid State Drive Upgrade Kit V300a in my new HP Envy with Windows 8.1. This upgrade was listed as an option for this model and was bought with the machine.
The doc lists OS supported, but Windows 8 is not in the list. Is Windows 8 supported?
The included disk labled "Arconis" includes ATIHO user guide pdfs and an HP-Drive-Install-Guide-1.15.13-327pm pdf. The install guide mentions using Arconis. The Arconis user guide says to run "setup" to install Acronis but there is no setup file on the disk. I have chosen the setting to display hidden files and there is nothing on the disk but pdfs. The v300a box claims that it includes Acronis Cloning Software.
How do I install this HP upgrade on my new HP laptop?

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
YES, Windows 8 and 8.1 should be supported.
Please refer to this "HP SSD Upgrade Kit Installation Guide" for instructions on setting-up the HP SSD Upgrade Kit and cloning your factory installed hard drive. Please read the guide carefully and in its entirety. Next, assembly the SSD drive and the drive enclosure, per the instructions on page 9. Now, carefully follow the cloning instructions from page 9 to page 26.
Per the instructions, the cloning software should be on the included CD/DVD and it may be a bootable disc. However, if you are unable to locate the required software, please see www.HPSupport.pny.com to register your product and download any needed software.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I have a 13" mac book pro with a 250 gb solid state drive and I would like to put in a larger one is this possible

I own a Mac book Pro 13" it has a 250 gb solid state drive and I would like to put a larger one in is this possible.

You don't need to partition your drive to run Fusion, only if you want to run Bootcamp.
If you have space on your Windows partition, I would suggest you backup your Windows partition, and then, delete the partition using Disk Utility.
You can now restore your virtual machine to a single volume or repartition if you prefer.
I would consider upgrading to a unibody MBP (used, refurbished will do) just to be able to access the HD. Opening the pre-unibody MBP is not something you would want to do.

I have an internal 256 Solid State Drive on my MacBook Pro. Can I upgrade it to a larger solid state drive? If so, how?

I am trying to free up space on my solid state drive on my MacBook Pro, but am not having much luck. I have come to the point where I am asking myself, "is it possible to upgrade to a larger internal drive?" Please help. I appreciate the feedback.

Yes you can upgrade it. Unless your MBP is one of the new Retina display models. Is it one of the new models with the Retina display?
If not it is the same as changing a regular hard drive. you buy a new bigger SSD. Take the bottom off, aboput 8 screws. Take the part that holds the SSD drive inplace. Remove the cable connector. Remove the 4 mounting screws on the side of the original SSD and istall them on the new SSD Re-Connect the cable. Slide the drive into the drive area. Replace the hold down part. Then put the bottom back on.
Then connect the original SSD to the compuiter with a SATA to USB adapter. Boot the system and hold down the Option key. At the screen that come up select the USB attached SSD and boot the system from it. Open Disk utility and Partition the new drive as 1 partition, format it Mac Extended (Journaled) giving the partition the name of Macintosh HD (or any name you like). Once that is done exit out of disk utility and get a copy of Carbon Copy Cloner or SuperDuper then install that. Run it and clone from the USB attached SSD to the SSD you just installed inside your system. Once that is done shut the system down, disconnect the USB attached SSD and then power on the system. It should now boot to the internal SSD you install. To nbe on the safe side go into System Preferences, Startup Disk and make sure the internal SSD is selected. You are done.

I have a 2008 13" Mac Book and want to put a solid state drive in it

I installed Lion firdt and then Clones my hard drive to the solid state drive but it has issues.
I tried to do a clesn install on the solid state drive but the install will not complete

The macbook originally came with OSX Leopard, which I upgradedto Snow Leopard.
I then increase the Ram to the full 4Gig and then upgraded the OS to LIon OS 10.7.5
I decided to swap the original hard drive with a Kingston SSDNow 100V+.
I used Carbon Clone to clone the original Hard drive and swapped the drives.
The issue I am having is that the sytem freezes and I get the pinwheel and have to push the power button to shutdown. The sytems restarsts but I never know when I will get the pinwheel.
I have taken the SSD out and put the original drive back in.
I did try to do a clean install onto the SSD by reformaytting the SSD but at the end of the install the installer loops back to the beginning, or I get the pin wheel again.
Is it possible that the Kingston Drive is not compattible?
Thanks for the help.
Jim

Upgrading ThinkPad E420s, Choosing Memory and Solid State Drive

Similar Messages

Maybe you are looking for