Upgrading to 2007B

Hi All,
We are using SAP B1 2005B with PL 34. Now we need to update to 2007B. What is the procedure for this. Is it necessary to surrender my old license and get new one for 2007B? How long it will take ?

Hi,
You can use old license itself.
Check the thread
Re: Steps for upgrading 2005B to 2007B
Steps for upgrading 2005B to 2007B
Re: Regarding Upgradation from 2005B to 2007B
Upgrade to 2007B PL 0
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

  • Upgradation from 2007B to 8.8

    Hi All,
    Can anyone help me how to upgrade from 2007B to 8.8. If any checklist or installation guide available for the same
    Regards
    Santosh

    Hi Santosh,
    You may check this: Re: Upgrade to SBO 8.8
    Thanks,
    Gordon

  • Reconciliation after upgraded to 2007B

    Dear all...
    Are there any steps should we do for reconciliation after we upgraded the database to 2007B? Because I noticed that those BP reconciled records are showing when I click on Bank Statement and External Reconciliations -> Reconciliation by choosing respective Business Partner.
    Thanks in advance for the advice.
    Regards,
    Catea k

    Hii Catea
    2007B is a version where in you have Automatic reconciliation process and you dont need to go for internal reconciliation every time that is why you can see reconciled transanctions related to particular BP
    you need to do manual reconciliation only when there is any transanctions other than normal
    you can check the PDF File for further clarification
    https://websmp203.sap-ag.de/~sapidb/011000358700000093002008E.pdf
    Thanks
    Rizz

  • Upgrade to 2007B PL 0

    Hi All
    I am using SAP B1 2005B Pl 046. I want to upgrade it to 2007B PL 0.. What is the procedure.I there any patch.
    warm regards
    anand

    Hi Anand,
    Check the thread
    Re: Steps for upgrading 2005B to 2007B
    Steps for upgrading 2005B to 2007B
    Re: Regarding Upgradation from 2005B to 2007B
    *Close the thread if issue solved.
    Regards
    Jambulingam.P
    Edited by: Jambulingam P on Jul 8, 2009 8:36 AM
    Edited by: Jambulingam P on Jul 8, 2009 8:51 AM

  • Regarding Upgradation from 2005B to 2007B

    Hi All,
             My clients are currently using SAP B1 2005B, PL34. I would like to upgrade the database to SAP B1 2007 B, but would like to know a few things;
    a. Do i need to upgrade the current database first to a higher PL in 2005 B??
    b. Which is the highest and the most stable version availabe in 2007B??
    c. Where do i get this PL from??
    Thanks in advance,
    Joseph

    Hi Joseph,
    a. Do i need to upgrade the current database first to a higher PL in 2005 B??
                Not Required you upgrade directly 2007B PL00.
    b. Which is the highest and the most stable version availabe in 2007B??
              PL 12
    c. Where do i get this PL from??
            Check the thread
    Patch download
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Upgrade 2007B

    Hi, We are planning to upgrade , from 2005b to 2007 b , one of our customer  who is currently on 2005B PL 39 .
    Please let me know which patch will be compatable in 2007B .
    Regards
    Anand Nayar

    Hi Anand Nayar,
    You may check these threads first:
    Upgrade to 2007B
    Re: How to upgrade 2005B to 2007B
    Thanks,
    Gordon

  • SBO upgrade paths

    Dear All,
    Can one please tell me that whether will be able to follow the following SBO upgrade paths or not?
    Case 1:
    SAP B1 2005 B PL: 05 to SAP B1 2007 PL: 7
    Case 2:
    SAP B1 2005 B PL: 05 to SAP B1 2005 B PL: 43
    Case 3:
    SAP B1 2007 PL: 0 to SAP B1 2007 PL: 7
    Edited by: Narottam Das on Nov 4, 2008 3:12 PM

    Case 1:
    SAP B1 2005 B PL: 05 to SAP B1 2007 PL: 7
    Answer:
    Yes You can Upgrade Directly from SBO 2005B PL:05 to SBO 2007B PL07.
    But it is recommeded you first upgrade from SBO 2005B PL:05 to SBO 2007B PL00.
    Then upgrade SBO 2007B PL:00 to SBO 2007B PL07.
    Case 2:
    SAP B1 2005 B PL: 05 to SAP B1 2005 B PL: 43
    Answer:
    Yes You can Upgrade Directly from SBO 2005B PL:05 to SBO 2005B PL:43.

  • Connection with license server failed sap after upgrade to 8.8

    Hi
    I had just upgraded to 2007b pl14 to 8.8 everything done good but when I login it giving me erroer "connection with license server failed"
    I had restarted the licence server but still it same
    And my licance server option is also disable ?
    plz help me out

    Hi,
    check the below link, it will help you........
    Re: Error in Server Tools Installation
    Rgds,
    Priya

  • Necessity of upgradation

    Is it necessity of every client that they must upgrade to 2007B.My client is satisfied with 2005B,He does not want to create problem in system due to excisable warehouse.he is using 2005B pl-42.
    So is it necessary to upgrade the system ?What will be the problem if we dont upgrade?
    Please suggest.
    Thanks

    Hiii Minhas
             As of my knowledge there is no problem if the client is satisfied with 2005B, there are some additional features added in 2007B , for example ( easy reconciliation, and some shortcuts)
                                  Upgradation depends on the client (for advance feautres)
                                                                                    thanks
                                                                                    RIYAZ

  • Error in Sales-A/R-Sales Report-Sales Analysis

    Dear All,
    After upgrading Sap 2007B ( PL:10 ) to sap 8.8 ( PL:05), we are facing some problems like when we generate Sales Analysis report Under....Sales-A/R------Sales Report.....Sales Analysis.....select Quaterly Report. In item Description it gives the numeric values instead of item names.
    So plz help us on this matter......................

    Dear Dinesh,
    There seems to be some data corruption/inconsitency in your database.
    Please Log your call to the SAP Support team.
    Thanks
    Asif

  • No matching record found G/L Account (OACT) A/P Credit Memo

    Hello Experts,
                                   When i post A/P Credit Memo i get message as No matching record found G/L Account (OACT).
                                    Version SAP B1 8.8 PL11
    I tried following
       check  the rounding account In G\L determination.
       check  the offset account in G\L determination.
    everything is properly set.
    We did upgrade from 2007B to SAP B1 8.8
    Please Suggest
    Quick reply will be helpful

    Hello Gordon & Sachin,
                                                                                    I have even tried in test system , same error it gives,
                                                   I have check the Purchase return , Purchase credit and Expense Account , everything is
                                                   properly set.
                                                   When i do copy to from A/P Invoice , it is getting added                                                                               
    One more error it gives mewhen  i load or open   the from of Purchase A/p credit Memo, it
                                                  Gives error in red color as "Divide By zero error encountered (NFN1)
    Please Suggest

  • Customer Receivables Ageing Report

    Hi experts,
    Our SAP version is 2005B PL 43.
    The Customer receivable Ageing Report has two tabs- By Journal entries tab and By sales Documents tab.
    1. We find that all Payments, Credit notes and Invoices appear in the Customer Ageing Report By Journal Postings.
    This happens in case where an invoice has been partly paid alongwith few other invoices which have been fully paid which we are unable to knock off, limitation in this version of SAP.As a result the Incoming payment and The Invoices both are seen as open in the Ageing Report - By jounal Postings whereas the Ageing Report by Sales Documents shows the net values.
    There are cases where if an incoming payment is cancelled, the cancelled entry is not knocked off,again a limitation in this version,as a result the Ageing Report by Jounal postings shows both the wrong payment received as well as the cancelled entry.This does not appear in the Ageing Report by Sales documents.
    2. The customer Statement Report if printed from the Customer Receivable Ageing Report - By Jounal Postings displays the payment entries alongwith the Credit notes and Invoices, which is very difficult for the customer to understand.
    Instead can we use the Ageing Report by Sales Documents to print the Customer Statement Report?
    3. Lastly The Ageing Report by Journal Postings can match the Ageing Report by Sales documents only if partly paid invoices, advance payments and cancelled payments are knocked off.
    We are currently not planning to upgrade to 2007B as we are waiting for the 8.8 version which will be rolled out in end of Dec, as informed to us by the SAP regional office.
    Our question is which settings will give us the correct Ageing for a customer?
    Regards,

    Hi Vishal,
    SAP always recommends to go with the ageing report by journal postings in the old versions. What happens there is that there are 2 separate reconciliation engines at work, one at document level which supports partial reconciliation & one at journal entry level, which only supports full reconciliation. Please have a look at this YEC presentation:
    https://psd.sap-ag.de/PEC/calendar/html/recording.php?hck=ee2c7bfa07c3f6523f8846e14428985172efeb4545d14ed4757dfc29be3732557a8abf7a1e89fc7e357cd90b6c39b9123e5cf0f6c4b1ab283171b31ede9ba278
    One of the most significant changes in version 2007 & 8.8 is that these reconciliation engines are now unified in that partial reconciliation is also fully supported on journal entry level.
    You will find a lot of info on this landing page:
    English: http://service.sap.com/~sapidb/011000358700000380562007E
    I would highly recommend you upgrade to 2007, it is much, much more advanced than 2005.
    All the best,
    Kerstin

  • Assessable Value

    Hi,
    We are using 2007 B - PL07
    Excise amount should be calculated on Assessable value. I have set the formula and calculation were working fine in 2005B PL - 43, but once we upgraded to 2007B that assessable value column is not editable. The assessable value is not constant at all times. so that i cannot declare it in item master. I have to enter the assessable value in assessable value column in PO. Is there any other initial set up settings in 2007B which differs from 2005 B
    Can anybody help in this regard
    Thanks in advance
    Narayanan

    Hi,
    For Assasble Create one Condition type like ZASS for this condion type Assign Acess sequence.Ex ZASS
    In Acess seq maintain table:Plant-Material Combination.
    So for this Condition Type Maintain Condition Records in MEK1.
    So  based on your req,I think this in Inter company stock transfer Purchase order?
    If yes i will answred later.
    Step  C.type            From    to      Req
    10     PB00                                   6
    20     ZASS                
    30     ZEd                    20
    40            Total for Vat 20    30
    50    Zvat                     40
    60           Price            10
    70           Total Price     40   60
    I think Ur issue is solved.
    Raghu

  • Patches Update

    Hi all,
    We've upgraded B1 2007B patches.  I've installed PL06 in server.  One of my client PC is showing an error called,
    'Another version of this product is already installed. Installation of this version cannot continue'.
    In addition to the above command, the install shield wizard is asking to uninstall the program through Add Remove program with some set of numbers.
    Please help us to solve the issue.
    Thanks,
    Balaji

    Dear Balaji,
    In order to resolve the issue, please remove the corrupted client installation
    in the workstation by using the following steps :-
    1. Go to Control pannel -->Add/Remove Programe --> Remove the client installation.
    2. Go to Start --> Run --> %temp% and delete all the files present in the temporary folder.
    3. Download the "Windows Installer CleanUp Utility" from the Microsoft site by using the following Link
    http://support.microsoft.com/kb/290301
    And remove the client installation by using "Windows Installer CleanUp Utility"
    After that you can reboot the machine and install the client again.
    It will resolve the issue.
    Regards,
    Rakesh Pati
    SAP Business One Forum Team

  • Second copy is not Printing in SAP B1 2007 B

    Dear Experts
    In 2005 b i am able to print two copies of incoming payments in PLD
    for eg : one copy for Customer and Second copy for Office
    But in 2007 B , i am not able to view and print the second page. none of the error showing while taking the print preview, and i can take only one page. I did the complete set up in pld paper format and also in print preference . still in 2007 b , its not working.
    Can any body help me to solve this issue
    Thanks

    hi,
    Template may be corrupted after upgrading to 2007B.
    Raise a support ticket to SAP in service market place.
    Jeyakanthan

Maybe you are looking for

  • Flash Quiz Template HELP Please!

    I created a quiz using the Flash Quiz Template and everything works fine. What I'm wondering is how do I make it so that it gives a different frame when the user fails and when the user passes. Please help. I am desperate here. Thank you very very mu

  • Export song list with Japanese, Chinese and some Korean characters

    I had tried to export my list of songs (which consist mainly of Japanese songs, some Chinese songs and a few Korean) using .xml but it seems like everytime I try to open it using Firefox or IE, both browsers will freeze and hang. I tried exporting as

  • How to dynamically create sqlldr control file using stored procedure

    I am trying to dynamically create the control file (.ctl) and execute the same using a stored procedure.I would be passing the file name as a parameter to this procedure. How do I go about doing this? The control file has the following structure. The

  • Hi Experts, questions about abap unit test(abap oo)?

    Hi Experts, I am learning abap unit test, could you please tell me some info about how I can test the performance of some specific code in my program? can abap unit test do this kind of job? and could you please tell me what I can do using abap unit

  • InDesign CS6 won't open files

    InDesign CS6 won't open some files. No error message, simply returns to previous 'Open...' view. I've tried restarting, rebooting, resetting my InDesign preferences and re-unzipping the original zip file. I can still open previously worked on files,