Upgrading to 5.1.1 causes my Pad to restart

I upgraded to 5.1.1 on my iPad 3rd gen and now the cellular data just says "searching" and every 5 minutes the pad restarts.
I have tried to restore, but it wont let me do that.
How can I combat this?

Thanks for the reply.
I did try to restore but to no avail.
I got error message 1654.
I phoned the Express Lane and they tried several things.
In the end I had to restore and rebuild from scratch (rather than using a back up) but the problem wasn't with the Pad, it was with my Microsoft Firewall (I use iTunes on a PC, I'm buying a Mac min now and stuffing the PC) it was blocking the passage of info from iTunes and stopping me completing the restore.
I turned off the firewall, restored with ease and turned it back on.
hey presto one iPad back in full working order.

Similar Messages

  • Does upgrading OSX 10.6.8 cause PhotoShop 9.0.2 to stop working?

    Would upgrading OSX 10.6.8 cause PhotoShop 9.0.2 to stop working?

    A Safari upgrade will not affect PS. An OS X upgrade, however, could. See App Compatibility Table - RoaringApps.

  • What would cause I Pad 2 to simply not respond?Checked cords, cords work on I Phone

    What would cause I Pad 2 to 'die'? Checked cords all work on other devices.

    Hello, loisfromclayton!
    The following articles may help get your iPad back up and running. I'll post the relevant parts here, as well.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    If iPad won't turn on, or the display stops responding
    Follow these steps, testing after each:
    Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If iPad still won't respond after you restore it
    Follow these steps, testing after each:
    If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
    If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
    For information on how to restore your iPad, see the following:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Best regards,
    Allen

  • Ipod causes windows explorer to restart

    everytime i plug in my ipod through USB and use windows explorer eg my computer/ my documents it causes windows explorer to restart everytime i open it. does any one else have this problem solved. thank you

    The same thing happens to me when I plug in my Iphone 3G. I am running Windows 7

  • After Effects CS6 crashes, causing my iMac to restart

    After Effects CS6 crashes, causing my iMac to restart.
    I want to buy AE CS6, so I downloaded the 30-day trial version.
    I followed all the instructions to install it properly and followed several tutorials to optimize it for my computer.
    This is what I use:
    iMac 27''
    CPU:
    3,2 GHz Intel Core i3
    memory:
    16 GB 1333 MHz DDR3
    archive:
    1 TB
    graphics card:
    ATI Radeon HD 5670 512 MB
    operating system:
    OS X 10.8.2 (12C60)
    we are filming with:
    Canon 5D Mark II
    File format:
    QuickTime (.mov)
    Based on everything I've read, my iMac has all the system prerequisites to use AE, and all the other programs that I use for video and audio recording and editing ( Final Cut X, Logic Pro, Pro Tools, Photoshop CS6, etc. ), work perfectly, run smoothly and never crash.
    After Effects CS6 crashes constantly, causing the computer to restart. It seems to run smoothly, then I start a render and it crashes; or I start a color correction with Curves and it crashes. Each and every time the computer restarts by itself.
    I've tried rendering smaller portions of video at a time, sometimes it finishes the rendering, sometimes not.
    Hope somebody can help me! Thanks.
    Hilary

    Your post is not much use to anyone. You are not telling us anything about your operating system, storage locations, output settings and whatever else may be relevant. The magic sauce is all in the details, not a generic assumption that this would be some bug or known issue.
    Mylenium

  • Audigy 2 ZS causing the pc to restart ??

    Just changed the PSU to a higher wattage and notice that the pc will start back up by itself when I shut it down. After much swearing and testing I have found out that if the Audigy card is installed the pc will restart but if I remove it the pc will shut down as intended. I am using the daughter card that came with the motherboard atm but it is Soundmax and quality is not good.
    I have WOL enabled in the BIOS (because I use it) and wondered if the sound card? - as it is a PCI card - could cause the pc to restart and if it can - how can I stop it so I can use the better card.
    Anyone?

    CoreCenter did not support my motherboard either after I added an Audigy2 ZS to my system. I never got any error about "nvraidservice.exe", but I removed the CoreCenter error by removing MSI Live Update Monitor from the autostart. Havnt had any problems since then. Hope it helps.
    And oh, the rig in the signature is my personal fileserver. My gaming-rig is as follows;
    "The Ryomou"
    Chieftec LCX-01B-B-SL case
    Antec TrueBlue 480 watt
    AMD Athlon64 3500+
    MSI Neo2 Platinum motherboard
    1024mb Corsair DDR400 RAM
    Gainward GeForce 6800GT Golden Sample
    Creative Soundblaster Audigy2 ZS
    One 200gb Maxtor SATA
    Two Samsung 16x dvd-rom
    Windows XP Pro SP2

  • Upgrade to 10.4.7 causes severe display flicker

    I am running a 15-inch MacBook Pro connected to a 23" cinema HD display.
    Since the upgrade to 10.4.7, the laptop screen starts to severely flicker after approximately 3-5 minute, rendering it unusable. Moving a window around (even on the 23") will cause large amounts of flickering; the windows on the laptop screen are duplicated for a split second, and then stabilize until the next display refresh takes place.
    The problem disappears after sleeping and waking up the machine, only to resurface after another 3-5 minutes.
    Re-installing the 10.4.6 backup fixed the issue. The problem came back after re-upgrading to 10.4.7, and went away again after downgrading to 10.4.6 again.
    Is this a 10.4.7 issue, or should I have my machine repaired?
    MacBook Pro 15-inch   Mac OS X (10.4.6)   15" MBP 2.0 GHz w/ 2GB, X1600 with 256 MB

    Same problem at my end since i got the MacBook Pro 15/2.16Ghz. On connecting an external display the main screen flickers after 3-5 mins, goes purple (similar to the pics someone posted earlier) and then goes black. Sometimes it comes back for a few mins but eventually both displays freeze - the internal one goes black and teh external one retains whatever picture was on it but no mouse/kbd control is active. I opened a case with Apple 3 days ago and have been troubleshooting it with them. My next step is to revert to 10.4.6 and see if the problem ges away. An interesting twist to this is that my boss has an identical (arrived the same day) Macbook Pro running with an identical external display attached and does NOT have this problem. The difference between our instals is that i run some additional apps such as Ms Office & AdiumX.

  • UPGRADING from TIGER to LEOPARD causes audio plug ins scan WAVES PROBLEMS

    I have upgraded my G5 from Tiger to Leopard and am now running 10.5.8. I am using LOGIC PRO 8 and have upgraded that to 8.0.2. When i open LOGIC PRO and it starts to scan the audio plug ins-it causes a problem that sends me to PACE-the Interlok site for my WAVES-it says this:
    IMPORTANT!
    If you're running Mac OS X 10.5 or above and your software keeps driving you back to this site, even after installing the latest extensions, then you need to update your software, not the extensions. Contact the publisher of the software you're trying to use regarding a 10.5 compatible update. Please don't contact PACE. Only the publisher of your software can resolve this issue.
    SO-i downloaded their latest extension and i keep getting brought back to their site. My software IS updated -from 8 to 8.0.2
    PLEASE HELP

    You provided almost all information except the waves version. Most probably Waves are outdated.

  • Upgrade to linux3.1.4 causes no boot(Solved?)

    While troubleshooting the failures of my raid0 bootable Compact Flash devices, I proceeded to perform the following setup.
    I first upgraded my system in the raid0 kernel 2.6.39.3-1 with a download via pacman -Syu.  Total packages downloaded was 317.  Linux kernel 3.1.4 was not accepted for download.  All packages were successfully downloaded and installed( rm/etc/profile.d/xxxx.sh was removed).  The device was recognized in /etc/proc/mdstat as /dev/md0.
    Therefore all items concerned with the latest packages were installed.  This without the new kernel 3.1.4.  I upgraded mirrorlist which was included in the packages.  I then rebooted into my raid0 system successfully.  I then upgraded to linux 3.1.4 kernel with pacman.
    I then rebooted but failed to boot with the error : unable to find /dev/md0...no major-minor number on device by uuidxxxxxxxxxxxxxxxx.
    Thus, it seems obvious there is a problem in the linux-3.1.4-1-x86_64.pkg .tar.xz which affects the blkid, using UUID, since previous failures encountered with this kernel indicate that the uuid changed in linux kernels to accept the uuid of the booting device in this case, the boot device is the first device (0) of the two devices(0,1).  There are also indications that the /dev/md0 becomes dev md127.
    Any guidance to the solution of this discrepancy would be welcomed.
    Last edited by lilsirecho (2011-11-16 15:34:12)

    The problem occurs with many users.
    My postings in the following arch post may give you a solution.  My views are expressed therein and may not be valid(however, I have had messed up downloads with bad mirrors, despite what has been reported in that post)
    Anyhow, there have been successful uses of my approach, even though it may seem off base.
    I did the complete list of steps to correct my system.  It is possible the mirror download did not include initramfs.  My approach was to " cover the bases" in proper pacman order not having left out pertinent possibilities and has helped others to correct their problem.
    I suggest you read the whole post , decide what might be useable including the recommend from falconindy.  He can well be right but why does it hit more than one user?
    Good luck and let us know how it goes...............
    EDIT:  The same problem occurred when I upgraded to the latest Kernel.  I performed the same procedure I recommended and now have the latest kernel in 3 pairs of CF raid0 cards.  They run faster than normal by 50% in hdparm -t.  I attribute this to the raid0 mode striping.
    It is not apparent to me what order of install or what speed of performance is applicable to pacman when downloading the core items in archlinux.  Perhaps a delay(ugh) is needed for initramfs to properly install.
    All of pacman is a black art but most definitely needs to be run according to hoyle but system changes such as initramfs need to be compatible with pacman if that is the problem with upgrades(as suggested by falconindy) .
    I expect the next kernel upgrade to cause the same failure based on past experience with linux kernels.
    Last edited by lilsirecho (2011-11-17 22:08:32)

  • Upgrade to Server 3.1 caused severe battery drain on devices

    Upon upgrade to Server 3.1, I have noticed that all registered devices managed by Profile Manager -- iPhones and iPads -- experience severe battery drain.  To the point that a full charge of these device would cause complete battery drain in less than 4 hours, even on standby mode.
    Solution:
    On the managed device,
    Log on to My Devices
    You will find that even though the device is Enrolled, it will have a duplicate device
    Remove all profiles on the device
    Re-Enrol the device
    I hope Apple fixes this.  I have device enrolled that's located overseas and it's difficult to inform the users on how to re-enrol their devices over the phone.

    Hi,
    I have exactly the same problem after upgrading to Mac OS X Server 3.1.
    All the connected iOS devices are continuously communicating with the Profile Manager of this server.
    I have tried to delete all the devices and profiles and then re-enrolled them, at first this looked like the solution for me too.
    Unfortunately after several hours some of the iOS devices started communicating heavily with this OS X 3.1 Server again, so the battery draining problem was back too.
    For now I have temporary disabled the Profile Manager to stop the iOS devices communicating and draining their batteries.
    @Apple: Please fix this as soon as possible!!!
    Kind regards,
    Rene.

  • I am running xp and the last time I tried to upgrade to Firefox 5 it caused my computer to slow down become unstable and eventually my hard drive crashed.

    However I do believe the hard drive had other issues that just might have been further compromised by downloading 5. Talked to a couple of others who have also had bad problems after downloading 5 and that is what really concerns me is that my problem is not isolated. I have just got my computer back up and running and am very concerned about continuing with the 5 upgrade that was automatically downloaded and will be installed the next time I start up. How do I prevent the download from installing upon start up next time until I can get some clearer info on why 5 is causing some problems and can avoid them?

    My mother just had this problem. After uninstalling a bunch of search malware, i was still seeing the bing tab come up on start up. The way I fixed this is to delete any shortcuts, remove it from the task bar and the start menu list. It appears this crappy malware modified the firefox and chrome(if installed) shortcuts to open bing.
    Of course another way is to modify the shortcuts to remove the link that they added. It was easier for me to remove and just re-pin.
    Hopefully that solves your problem too.

  • Wh is Adobe is causing my iMac to restart several times a day since upgrading to Yosemite?

    Based on the Apple Error Report, I was told that there's SLEEP/WAKE error, caused by an Adobe process: AdobeIPCBroker {1187}.   Anyone else having the same issue? Any ideas on how to resolve this?

    You say your problem began with the upgrade to Yosemite... so why do you think it is Adobe's problem?
    Have you told Apple that their upgrade breaks your programs?

  • Upgrade to 10.5.8 causes black edges on HDMI TV

    My Mac Mini has worked perfectly connected to a Sony Bravia TV through HDMI.
    Since upgrading to 10.5.8 however I either loose the edge of the screen (if overscan on) or have to view with a black boarder if not.
    All related posts seem to suggest this is the TV's fault but as it worked before it must be atleast related to the Mac. I've tried different resolutions and rebooting with the TV etc. but no luck.

    fixed in subsequent osx update - possibly caused by monitor/TV not being on whilst upgrading

  • Upgrade to 1.6.0_14 causing Webstart launched application to fail

    Hi, I am looking for a little help with changes made to Webstart and JNLP with update 14 for 1.6. I have an application that is packaged within a war and distributed to webserver to be launched with webstart. It has been working for 3 years without change (various versions of Java from 1.5 - 1.6.0_13) until just recently...
    Stack Trace received when trying to run the app:
    java.lang.SecurityException: class "com.cu.ajent.logger.AbstractAjentLogger"'s signer information does not match signer information of other classes in the same package
    at java.lang.ClassLoader.checkCerts(Unknown Source)
    at java.lang.ClassLoader.preDefineClass(Unknown Source)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$000(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$000(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    at com.cu.ajent.client.gui.core.MainWindow.main(MainWindow.java:287)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at com.sun.javaws.Launcher.executeApplication(Unknown Source)
    at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
    at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
    at com.sun.javaws.Launcher.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    The funny thing is, this particular class only exists in one jar file with that package name and it is signed. I am wondering if this is a red herring error or if I am just completely missing something.
    JNLP File that does not work with update 14 ONLY (all other versions of 5 and 6 work):
    Notes: All jar files that are pulled through this descriptor AND the 2 extension JNLP files are from the same "signed" directory and are all signed by the same certificate at build time
    <jnlp spec="1.0+" codebase="http://jeffl:8001/Ajility/" href="http://jeffl:8001/Ajility/Ajility.jnlp">
    <information>
    <title>Ajility Client</title>
    <vendor>Columbia Ultimate</vendor>
    <homepage href="http://jeffl:8001/Ajility/index.html"/>
    <description>Ajility Client Installation with Java Web Start</description>
    <description kind="short">Ajility Client</description>
    <icon href="http://jeffl:8001/Ajility/cu/images/Ajility_logo.jpg" kind="default"/>
    </information>
    <security>
    <all-permissions/>
    </security>
    <update check="always" policy="always"/>
    <resources>
    <java version="1.6"/>
    <property name="java.naming.factory.initial" value="weblogic.jndi.WLInitialContextFactory"/>
    <property name="java.naming.provider.url" value="t3://jeffl:8001"/>
    <property name="java.security.auth.login.config" value="http://jeffl:8001/Ajility/cu/properties/jaas_client.conf"/>
    <property name="appserver.connector.class" value="com.cu.ajility.appserver.weblogic.WebLogicConnector"/>
    <jar href="http://jeffl:8001/Ajility/cu/lib/signed/AjilityGUI.jar" download="eager" main="false"/>
    <extension href="http://jeffl:8001/Ajility/JNLP/signed_client_libs.jnlp" name="Ajility_lib"/>
    <extension href="http://jeffl:8001/Ajility/JNLP/signed_wls_libs.jnlp" name="wls_lib"/>
    <nativelib href="http://jeffl:8001/Ajility/cu/lib/swt-win32-dll.jar" download="eager" main="false"/>
    </resources>
    <application-desc/>
    </jnlp>
    Here is the version of the JNLP file that works ONLY with update 14 (fails on all other versions of java 5 and 6)
    Notes: The ONLY jar files that are actually signed are the 2 that are referenced in this main JNLP file. None of the extension jars are signed.
    <jnlp spec="1.0+" codebase="http://jeffl:8001/Ajility/" href="http://jeffl:8001/Ajility/Ajility.jnlp">
    <information>
    <title>Ajility Client</title>
    <vendor>Columbia Ultimate</vendor>
    <homepage href="http://jeffl:8001/Ajility/index.html"/>
    <description>Ajility Client Installation with Java Web Start</description>
    <description kind="short">Ajility Client</description>
    <icon href="http://jeffl:8001/Ajility/cu/images/Ajility_logo.jpg" kind="default"/>
    </information>
    <security>
    <all-permissions/>
    </security>
    <update check="always" policy="always"/>
    <resources>
    <java version="1.6"/>
    <property name="java.naming.factory.initial" value="weblogic.jndi.WLInitialContextFactory"/>
    <property name="java.naming.provider.url" value="t3://jeffl:8001"/>
    <property name="java.security.auth.login.config" value="http://jeffl:8001/Ajility/cu/properties/jaas_client.conf"/>
    <property name="appserver.connector.class" value="com.cu.ajility.appserver.weblogic.WebLogicConnector"/>
    <jar href="http://jeffl:8001/Ajility/cu/lib/AjilityGUI.jar" download="eager" main="false"/>
    <extension href="http://jeffl:8001/Ajility/JNLP/client_libs.jnlp" name="Ajility_lib"/>
    <extension href="http://jeffl:8001/Ajility/JNLP/wls_libs.jnlp" name="wls_lib"/>
    <nativelib href="http://jeffl:8001/Ajility/cu/lib/swt-win32-dll.jar" download="eager" main="false"/>
    </resources>
    <application-desc/>
    </jnlp>
    Can anyone give me an idea or a place to start?

    Hello,
    I am also having a problem with this upgrade to 1.6.0_14. Webstart was working find with us throughout java 6 but this upgrade broke it. Here is the JNLP. All of the jars are signed by our own certificate, but the error is saying that one of our jars is not signed. I am 100% positive that the jar is signed. In the release notes i saw them say that if we set an "insecure system property" that it throw this error? Here is our jnlp please help!
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp spec="1.0+"
    codebase="http://$$app.codebase$$:8080/smartwerks/webstart"
    href="smartwerks.jnlp">
    <information>
         <title>$$app.title$$</title>
         <vendor>Tyler Retail Systems</vendor>
         <description>$$app.title$$</description>
         <homepage href="http://$$app.codebase$$:8080/smartwerks"/>
         <description kind="short">$$app.title$$</description>
         <icon href="images/smartwerks_logo_icon.jpg" width="64" height="64" kind="short"/>
         <icon href="images/smartwerks_logo.jpg" kind="splash" />
         <shortcut online="true">
              <desktop/>           
              <menu submenu="Tyler Retail Systems"/>
         </shortcut>
         <update check="always" policy="always" />
    </information>
    <security>
         <all-permissions/>
    </security>
    <resources>
              <jar href="Smartwerks-client.jar" main="true"/>
              <jar href="lib/Smartwerks-common.jar"/>
              <jar href="lib/FastInfoset-1.2.3.jar" />          
              <jar href="lib/XmlSchema-1.4.5.jar" />               
              <jar href="lib/aopalliance-1.0.jar" />
              <jar href="lib/bsf-2.4.0.jar" />
              <jar href="lib/bsh-1.3.0.jar" />
              <jar href="lib/commons-codec-1.3.jar" />
              <jar href="lib/commons-collections-3.1.jar" />
              <jar href="lib/commons-lang-2.4.jar" />
              <jar href="lib/commons-logging-1.1.1.jar" />
              <jar href="lib/cxf-2.2.1.jar" />
              <jar href="lib/cxf-manifest.jar" />
              <jar href="lib/forms-1.0.5.jar" />
              <jar href="lib/geronimo-activation_1.1_spec-1.0.2.jar" />
              <jar href="lib/geronimo-annotation_1.0_spec-1.1.1.jar" />
              <jar href="lib/geronimo-javamail_1.4_spec-1.2.jar" />
              <jar href="lib/hsqldb.jar" />          
              <jar href="lib/imaging.jar" />
              <jar href="lib/informa.jar" />          
              <jar href="lib/jaxb-api-2.1.jar" />
              <jar href="lib/jaxb-impl-2.1.9.jar" />
              <jar href="lib/jcalendar.jar" />
              <!-- jasper reporting -->          
              <jar href="lib/iText-2.1.4.jar" />
              <jar href="lib/jasperreports-3.5.0.jar" />
              <jar href="lib/poi-3.2-FINAL-20081019.jar" />
              <jar href="lib/poi-contrib-3.2-FINAL-20081019.jar" />
              <jar href="lib/poi-scratchpad-3.2-FINAL-20081019.jar" />
              <jar href="lib/jxl.jar" />          
              <!-- java desktop -->
              <jar href="lib/jdic.jar" />
              <jar href="lib/jdic_stub.jar" />
              <nativelib href="lib/jdic_dll.jar" />
              <!-- JIDE -->
              <jar href="lib/jide-action.jar" />
              <jar href="lib/jide-beaninfo.jar" />
              <jar href="lib/jide-common.jar" />
              <jar href="lib/jide-components.jar" />
              <jar href="lib/jide-dashboard.jar" />          
              <jar href="lib/jide-dialogs.jar" />
              <jar href="lib/jide-dock.jar" />
              <jar href="lib/jide-editor.jar" />
              <jar href="lib/jide-grids.jar" />
              <jar href="lib/jide-pivot.jar" />
              <jar href="lib/jide-rss.jar" />
              <jar href="lib/jide-shortcut.jar" />
              <!-- java help -->
              <jar href="lib/jsearch.jar" />
              <jar href="lib/jh.jar" />
              <jar href="lib/jhall.jar" />
              <jar href="lib/jhbasic.jar" />
              <!-- jgoodies -->
              <jar href="lib/looks-1.2.2.jar" />
              <!-- misc utils -->
              <jar href="lib/log4j-1.2.11.jar" />          
              <jar href="lib/mail.jar" />
              <jar href="lib/neethi-2.0.4.jar" />
              <jar href="lib/pixie-0.99.0.jar" />
              <jar href="lib/syndiag2.jar" />
              <jar href="lib/velocity-1.5.jar" />          
              <jar href="lib/wsdl4j-1.6.2.jar" />
              <jar href="lib/wss4j-1.5.6.jar" />
              <jar href="lib/wstx-asl-3.2.6.jar" />
              <jar href="lib/xercesImpl.jar" />
              <jar href="lib/xml-apis-1.3.02.jar" />
              <jar href="lib/xml-resolver-1.2.jar" />
              <j2se version="1.6.0_5+" href="http://java.sun.com/products/autodl/j2se" java-vm-args="-ea" initial-heap-size="128m" max-heap-size="512m" />
    </resources>
    <application-desc main-class="com.tylernet.smartwerks.client.main.Main"/>
    </jnlp>

  • Cannot sync iphoto folders after upgrading to mavericks.  syncing caused removal of all photo folders from iPhone

    After upgrading 17" macbook pro/late 2009 to mavericks - runs slow and having syncing issues.  syncs freeze then quit.  folders were removed from devices without my setting that up.  will not add.  all devices are NOT on OS7.  Is this why??

    You and me both! I thought my error (Unknown error (-50) popped up when I thought I'd try out MobileMe, (which, as an aside screwed a LOT of things up). Now I have no idea. I started getting duplicate bookmarks in Safari, and email from all over, and then my photos will no longer sync from iPhoto. I've never had this problem, had my MacBook Pro for three years, my iMac almost a year, iPhone for 2+. APPLE!!! ARE YOU LISTENING??????

Maybe you are looking for