Upgrading to 7.4.1 - Error Message 2738

I have iTunes 7.3.0 and am attempting to upgrade to 7.4.1. The installion gets about 70 percent of the way there before it hits a problem when attempting to update Quicktime, Error Message 2738 shows up. Anyone know what the problem is?
Thanks.

I had the 2738 error for both Quicktime and Itunes. The solution of running the command; regsvr32 vbscript.dll in the system32 folder did not work for me.
I'm running Vista 64 Bit Home Edition. After much trail and error this is what worked.
open Command Prompt using a right click "Run as Administrator".
cd to C:\windows\syswow64
type- regsvr32 vbscript.dll, then hit enter.
This is not an official solution but it worked for my 64 bit system.

Similar Messages

  • Following the recent iTunes upgrade I am getting two error messages (-42404) and (-50).  Any ideas how to rectify?

    Using iTunes for the first time since the upgrade I am plagued with error messages - one telling me that a required component is not installed (-42404) and a second that my iTunes store request cannot be completed (-50).  I've reset my old iPod as the message tells me but am reluctant to do that on my iPhone and risk loosing content.  I've uninstalled and reinstalled iTunes but it's made no difference.  Any ideas how to fix please?

    Disable your firewall/security software.

  • ISA550 After upgrade 1.2.17 many error messages in the log

    Hi,
    After upgrade> 1.2.17 many error messages in the log
    Hello,
    after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
    Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
    Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
    These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
    Does anyone have an idea?
    Thanks and regards
    Claus

    Hi John,
    Has this issue been resolved yet ?
    I'm facing the same issue after upgrading to 1.2.18
    11/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
    11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
    11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
    11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
    11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
    11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
    11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
    11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
    11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
    11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
    Please let me know how to make this go away.
    What are these errors about anyway ?? What causing it ??
    Thanks
    Lutfi
    2013-11-11 10:42:29
    Error
    System
    sdsd:  msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
    2013-11-10 12:42:59
    Error
    System
    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
    2013-11-10 12:42:59
    Error
    System
    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
    2013-11-10 12:42:58
    Error
    System
    sdsd: tcp_connect: Couldn't connect socket, errno = 110
    2013-11-10 00:22:57
    Error
    System
    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
    2013-11-10 00:22:57
    Error
    System
    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
    2013-11-10 00:22:56
    Error
    System
    sdsd: tcp_connect: Couldn't connect socket, errno = 110
    2013-11-09 18:43:17
    Error
    System
    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
    2013-11-09 18:43:16
    Error
    System
    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
    2013-11-09 18:43:16
    Error
    System
    sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
    11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
    11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
    11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
    11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
    11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
    11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
    11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
    11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
    11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 1

  • Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error.  We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to

    Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error.  We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5.  Can anyone assist

    Contact serial number support by web chat.
    Mylenium

  • Quicktime Error message 2738 GELP PLEASE

    I am loosing my Mind!!! I am trying to download the new Itunes with new quicktime and when it starts to install I get "can not finins.....error message 2738
    I can not even unistall...I tried to Uninstall in order to reinstall....same message when I try to uninstall....HELP PLEASE
    I bought a new ITouch and I can't use it because I can not install the new Itunes
    THANK YOU

    OS=Operating System
    Need to know which version you have? To find out click on the Apple in the upper left hand corner of your computer screen.
    Now click on About This Mac.
    The next window that pops up, will tell you which version of Mac OS that is currently installed on your computer.
    The latest version is (Tiger) OS 10.4.10.
    ======================
    *Repairing Permissions:*
    Save and/or quit your applications & doucuments
    Go to Applications>Utilities Folder
    Click Disk Utility
    Click the Volumn (HD) that you want to check.
    Click the Repair Disk Permissions button. (Don't worry about verifying)
    At the bottom of window when the repairs have finished, you will see the “most important thing”:
    Permission Repairs Complete
    The previliges have been repaired or completed on the selected volumn.
    Restart your computer (Optional).
    Go to Applications>Utilities>Disk Utility and select your volume and then select Repair Permissions.
    **Same directions are also in the OS Mac Help Menu.**
    ==================
    Repairing permissions from the Tiger DVD
    Boot up from your Tiger Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
    Once this process has been completed restart your computer.
    See Knowlege Base Article:
    http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature
    TIP-You should Repair Permissions & restart:
    After installing and/or updating an OS (Operating System).
    After installing software.

  • Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)

  • HT1947 After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

    After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

    Hey gwscrt,
    Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    I would read the document in full, but here are the applicable steps for you:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Have a good one,
    David

  • I Beta tested 4.0 RC1 and now can not upgrade to 4.0. Error message is need to reboot to complete prior instalation. Have removed all previous versions of Firefox, rebooted and still same error message.

    I Beta tested up to and including 4.0 RC1 without major problems. However I can not now upgrade to 4.0. Same error message time and again, "need to reboot to complete prior upgrade instalation". I rebooted several times, then tried first removing all previous versions of Firefox using both MS Add/Remove and then iolo System Mechanic, then again downloading 4.0. Even after rebooting same error message. I can not therefore install/use Firefox.

    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0: http://www.mozilla.com/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Keep getting error message 2738 when trying to update to 7.3.1

    Hi folks I need some help... I keep getting an error code 2738 when I try to upgrade to 7.3.1.... I tried to uninstall itunes thinking that if I had a clean slate then it would allow me to upgrade.... and that went okay I then tried to unistall quicktime, and I keep getting unexpected error code 2738 and it wont let me delete quicktime. I then tried to reinstall Itunes/quicktime and it still gives me the same error code 2738 and shuts down after the quicktime part of the install is suppose to happen. Any help is greatly appreciated....

    Hi folks I need some help... I keep getting an error
    code 2738 when I try to upgrade to 7.3.1.... I tried
    to uninstall itunes thinking that if I had a clean
    slate then it would allow me to upgrade.... and that
    went okay I then tried to unistall quicktime, and I
    keep getting unexpected error code 2738 and it wont
    let me delete quicktime. I then tried to reinstall
    Itunes/quicktime and it still gives me the same error
    code 2738 and shuts down after the quicktime part of
    the install is suppose to happen. Any help is
    greatly appreciated....
    Okay I did a little playing around and got my situation resolved.... I went and installed the windows uninstaller program....http://download.microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1B D/msicuu2.exe and I clicked on remove quicktime.... I then removed the apple software update in the control panel using the add/remove programs feature, and also removed apple mobile support program in the add/remove list. restarted computer and re downloaded the new itunes w/quicktime file... It installed correctly this time. Hope this helps.... Thanks

  • Can't sign in to my bank since upgrading to Firefox 4, no error message, sign in button won't work, fine with IE?

    Upgraded to Firefox 4 yesterday. Have since had a problem logging into my bank. I enter all log in details, click the sign in button and nothing happens, the page just remains static, there are no error messages. No problem logging in with Internet Explorer or on a separate computer with Firefox 3 so it must be Firefox 4 that's causing the problem. It's just this one site, all other sites I use requiring log in work fine. It can't be a problem with the site because as I said it works fine with IE and Firefox 3?? Help!

    Have now ditched Firefox 4 and reinstalled the previous version-the problem has disappeared, doesn't say much for the new version!

  • I tunes version 7.5 and error message 2738

    Have made several attempts recently to download the latest version of i tunes (7.5) but everytime I try I get almost to the end of installing and then when it starts to install quicktime I get an error message which is 2738 and says it cannot complete the install.
    Can anyone help before I chuck my laptop out of the window!!!
    Thanks

    Have you tried the following troubleshooting document?
    iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

  • Firefox 5 upgrade results in the following error message presented under details. My system is configure for any type of LAN settings since I only have dail-up connection.

    Installation of FireFox 5 after deleting FireFox 3.6v results in the following error message which I cannot resolve or fix. My system is configured with IE 8v and dial-up only.
    "FIREFOX BROWSER 4.0v and 5.0v
    The proxy server is refusing connections
    Firefox is configured to use a proxy server that is refusing connections.
    * Check the proxy settings to make sure that they are correct.
    * Contact your network administrator to make sure the proxy server is working."

    Please try to go to tools, options, advanced, networking, settings, set "no proxy", re-try. More details here: [[options window - advanced panel]].

  • Prompted to upgrade to Reader X, get error message 13050

    Hi,
    I was prompted to upgrade from my older AR version 9.something, that was working just fine to AR X. Download went fine; but upon installation I got the message: "Setup interrupted before Adobe Reader could be completely installed. ERROR CODE: 13050". Looked for this error in forums, seems not been mentioned before.  My OS is Windows 7 and I have in this process downloaded at least 3 times, tried to install equal or more number of times, shut off, restarted, allowed thru firewall... I'm running out of ideas and my technical knowledge is pretty basic.
    I also tried via Adobe Download manager... didn't work. Meantime my former version of AR has disappeared, so I cannot open any of my pdf documents right now!! Can anyone give me some idea where to go from here?

    You cannot install Reader 10.0.0 because Windows Installer engine finds newer version of Adobe Reader on your system.
    If you cannot find it anywhere try the following-
    1.
    Download and install latest Adobe Reader 10.1.0 ( AdbeRdr1010_en_US.msi) from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/en_US/
    Notice that you need .msi version.
    Try to install - most likely you will get "Repair\Uninstall"  installation dialog, choose Repair.
    2.
    If this does not work, the easiest for you would be remove all instances of Adobe Reader using cleanup methods recommended on this forum.
    Than try to install Adobe Reader you have downloaded in #1

  • HT201364 I cannot do the upgrade as i receive an error message saying that the certificate isn't signed... i need help. thank you

    HI,
    I am trying to upgrade from Lion to OSX Maverick but when i click OK I receive a message saying that The product distribution file could not be verified. It may be damaged or was not signed.
    I would love to install the new OSX.
    PLease help!!!
    thank you

    Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
    Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
    Thank you @dj_paige

  • After installing a iTune upgrade I'm getting this error message

    iTunes could not connect to the iTune store. Make sure your network connection is active and try again.
    Anyone have any ideas?

    Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
    Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
    Hope this helps.

Maybe you are looking for