Upgrading to better speeds after exchange upgraded...

Hey,
My exchange has been marked as on the 21NC for probably close to a year now however I never got a speed boost after the upgrade. I figured my download speed might not of changed because of the SNR but my upload speed should of? So I assume the speed is still capped at the "upto 8Mb"?
DSL Modulation Mode:
G.992.5 (ADSL2+)
DSL Path Mode:
FAST
Downstream Rate:
5280 Kbps
Upstream Rate:
448 Kbps
Downstream Margin:
12 db
Upstream Margin:
23 db
Switching modem to to regular ADSL results in roughly the same speeds.
DSL Modulation Mode:
G.992.1 (G.DMT)
DSL Path Mode:
FAST
Downstream Rate:
5504 Kbps
Upstream Rate:
448 Kbps
Downstream Margin:
10 db
Upstream Margin:
23 db
So anyway to change from ADSLMax to ADSL2+ speeds? I'm quite a old customer so I have my own network equipment and only have a first gen BT Homehub laying around somewhere.

Using a Linksys AM200 modem. When you let the DSLAM set the mode unfortunately it doesn't actually tell me what mode it is in.
DSL Status:
UP
DSL Modulation Mode:
Auto
DSL Path Mode:
FAST
Downstream Rate:
6016 Kbps
Upstream Rate:
448 Kbps
Downstream Margin:
12 db
Upstream Margin:
23 db
Downstream Line Attenuation:
41
Upstream Line Attenuation:
23
Downstream Transmit Power:
19
Upstream Transmit Power:
12
LOS Errors:
0
As far as I know a 'multimode box' is only present with fiber?

Similar Messages

Slow broadband speed after exchange upgrade

Hi,
I wonder if anyone can help. My local exchange was 'upgraded' on 14th August, immediately following that my Broadband speed has halved and never recovered, I used to get approx 7Mbps connection speed with a 5.8 ~ 6.3 Mbps down load speed. SInce then and upto now I only get a connection speed of approx 3.3Mbps with a download speed of around 2.8Mbps.
Since we have BT Vision this is now close to the limit of what it requires to work for on demand content.
I have spoken to BT Technical on a number of occasions. At first they told me it was my router (HomeHub V1) and that I could have a new one if a signed up for another 12 months. Since I doubted this and I also had a Home Hub V1.5 router I swapped to this router and it gave the same results! This was on the 7th September.
Since then I have spoken to BT Technical on a number of occasions, always this involves the same path - get asked whether I have tried different microfilter, connection to the main socket blah blah. Then they check the exchange, it comes up with a CC12 ADQ error, they ask BT Wholesale to investigate, BT Wholesale clear the error, BT technical ring back, ask me if speed is any better, tell them no, they say they will reset the line profile, this makes no difference!
If I ring again then we just go round in the same circle again.
Has anyone got any ideas or can someone sort this out, fed up of pointless phone calls at the moment!
Here are the line statistics from the BT Home Hub (V1.5) as things currently stand.:
Hope someone can help,
Thanks
DSL Connection
Link Information
Uptime:
0 days, 13:08:25
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
664 / 3,327
Data Transferred (Sent/Received) [MB/MB]:
11.57 / 62.47
Output Power (Up/Down) [dBm]:
9.5 / 0.0
Line Attenuation (Up/Down) [dB]:
8.5 / 18.5
SN Margin (Up/Down) [dB]:
11.0 / 27.5
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
0 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 6
HEC Errors (Up/Down):
0 / 0
Line Profile:
Fast

Well 12 days later and still no improvement. Changed back to the homehub V1.0 (10 days ago) as the Homehub V1.5 was to unstable and kept dropping connection every few hours.
Spoke to BT technical last Sunday, they agreed to send me a new HomeHub in the end. This has now been lost / stolen during delivery - what a farce. Spoke to BT Technical again last night, went through the same sets of testing same results. Technical this time said I shouldn't have been sent a new homehub anyway as I was not in contract!
Reading through this forum and others it seems that there are a lot of people reporting speed issues (speed halving from original sync/download speed) when exchange has been upgraded to ADSL 2+ and the home hub is V1.0 or V1.5.
The tech i spoke to last night seemed to think it was the homehub but said i wouldn't get another one unless I signed a new contract. Told him there was no way I would sign a new contract when their customer service was so poor and they are unable to resolve problems.
He stated he would reset the I.P. profile. This morning download SNR has shot up to 30db (has got down to 18db) last night and sync speed was lower.
It seems to me that BT know there is an issue with HH V1.0 and V1.5 and ADSL 2+ but rather than send you a new router ask that you sign up to a new contract. This seems partly a ruse just to tie people into another 12 month contract.
My neighbours have the same set up and are experiencing the same problems since the exchange upgrade!

Has anyone seen a DRASTIC change in speed after upgrading to 5.7?

Has anyone seen a DRASTIC change in speed after upgrading to 5.7? Just the simple task of copying photos now takes FOREVER. Importing iphoto for just two years of photos (my smallest iphoto library by far) took A WEEK. I did not have access to Lightroom for a week. I thought it was just going to be the iphoto import, but now my regular import is taking almost 1/2 an hour and only 22 photos into the import.

Oh no! I think I might be experiencing the same problem, oddly with almost exactly the same time to import from iPhoto, just shy of 7 days...
I also posted this problem to the form and am actually on the phone with Adobe support right now. I have an iPhoto library of ~15,000 photos and I didn't expect it to be very fast, but it's taking an average of at least 40 seconds per photo to import, and it has kept complete focus of LR so I can't even confirm that it isn't importing duplicates. By my calculations it should take over 166 hours to complete the import! Something has to be wrong here. I've been going for over 48 hours and am scared to stop the import if this really is normal performance.
Are normal import tasks also slow for you now? Can you share any more details? I can't test myself yet since the iPhoto import is still churning, but it could help troubleshooting with support. I'll let you know if they come back with anything, I'm on hold now.

Extremely slow wifi speeds after Yosemite install

I "upgraded" to Yosemite and now my wifi speeds on this machine (iMAC) are extremely slow, like crawling. Was fine this morning before update. All other devices in the house (iphones, ipad, macbook pro) are all running normal fast speeds. Does anyone know if there is a fix for this? Missing Mavericks already.

I saw a big (huge) change in wifi speeds after Yosemite upgrade, it was more noticeable the farther away from the router I was. I moved closer to the Router and speed was back to normal.
You can check your connection by pressing at the same time alt(option) and the wifi icon (at top of menu bar), a drop down list will show the connection's stats, look for TX Rate towards the bottom. After upgrade my TX Rate dropped to 5 Mbps! I moved closer to the Router, and TX Rate improved to 146 Mbps, Safari was browsing at normal speeds again.
I read other discussions, found a suggestion to rename my location, in System Preferences - Network - WiFi, at top of panel Location, mine was named Automatic (the default). As suggested, I clicked on the arrows, selected edit, and renamed the location, name it anything you like... I restarted the computer, and luckily enough my TX Rate at the farthest location from Router improved from 5Mbps to 39 Mbps. Still slower than before, never saw it below 80's. Don't know if the restart or the change of location name did the trick, maybe it was that Yosemite needed time to adjust to its new environment, regardless, there was some improvement.
I think there is an issue with Yosemite and WiFi that causes the TX Rate to drop more than with Mavericks as the distance from Router increases. Does not sound logical, but that is what the connection stats are saying!

IMac G5 fan always at maximum speed after booting into si...

IMac G5 fan always at maximum speed after booting into single-user mode in 10.4.3
Model: 1.6GHz iMac G5 with 10.4.3
I updated my iMac to 10.4.3, then booted into single-user mode to do some cleaning at the command-line level. I know, as others have discovered, that in single-user mode, the thermal control is off, so the fan gradually increases up to maximum speed and stays there until you reboot or go into multi-user mode. Well, I have never experienced this one before, and I'm freaking out about it... I went into single-user mood one reboot after upgrading to 10.4.3, and after all the println white text lines ended, the [1] fan shot up to maximum speed in 0.35 seconds (it sounded like a high-pitched DJ record scratch during the time interval), [2] the fan stayed at maximum speed when I left single-user mode, and [3] I cannot get the fan to slow itself! I rebooted, shut down, and even tried booting off the Tiger CD, but the instant I hit the power button to turn on the iMac, the fans blast up to maximum speed. They shut down when I put the iMac to Sleep, but then they blast up again in full when it wakes up. I checked my settings in the Energy Saver preference pane, and I have the performance set to "Reduced," which is the lowest possible.
I searched to see if anyone else had this problem or if the KBase had any info, but I didn't see any. I'm thinking about erasing and installing my stuff on the iMac, even though I just did that today.
Again, this maximum speed fan problem is freaking me out. It just started when I booted into single-user mode in OS X 10.4.3. I have booted into single-user mode before (10.4.2) and have not experienced this fan issue. I repeat, the fans blast up to maximum speed after pressing the power switch to turn on the computer, so they do not even wait for the Apple logo to show up on the screen before blasting away. How can I get these fans to not do this anymore?!

for the last few months my 20" 1.8GHz Imac has been very noisy - fans seem to run constantly and noisily. It might have been when updating to Tiger but I was never sure. Today, on the advice of a chat tech, I opened the case and reset the SMU to hopefully cure another problem. I noticed that all the air vents, intake and expel ones, were all quite heavily clogged up - not blocked but clogged with dust and fluff. I cleared it away mainly by blowing but also with a hand held hoover held close by. The exposed fan still as a lot of muck on it but greatly reduced and all the vents are completely clear. Having put everything back together again the iMac has been runnning quietly all day. May have been the SMU reset but equally might just be that the computer couldn'tdraw in cool air, circulate it or expel it properly and the fans had to work overtime to cope. Worth checking if you have noisy fans running at speed constantly.

Broadband speed after phoneline fault fixed.

How long does it take for broadband to get back up to speed after a phoneline fault has been resolved?
Our phone fault has just been fixed after being out for more than a week. The broadband remained connected but cripplingly slow. Now the phone is back the bb is slightly better but nothing like it's old speed.
I appreciate that it may take a while but any idea how long?
Thanks.

please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

IS THERE ANY SIMPLE WAY TO RETURN SPEED PERFORMANCE TO FACTORY SPEED AFTER ABOUT 3 YEARS OF RELATIVELY STANDARD USE?

Everyone is often so quick to bash all these 'cleaning' utilities but rarely give any solutions.
There's a lot of critiques and endless lists of what NOT to do to avoid performance problems.
My Powerbook is 3 years old. It runs like molasses... SLOW.
I'm not a computer geek, but I'm smart and understand quite a bit more than a newbie.
Do I need a degree in computer engineering to fix/speed up my mac?
Yes, I know, the cleaning utilities suck. But is it really true of all of them?
I'm not totally convinced because there seems to be such a huge market for them.
Sure, there's a huge market for bottled water too, so maybe they are just useless/marketing crap, but I really want to return to my original speed performance quickly and can't seem to find out if it's possible with a utility.
I'm not willing to sit down for 3 hours and study line by line b.s. about how to fix it.
I have no problem if it's not fixable. I've always assumed operating systems outgrow their hardware's capacity to keep up, and sell my old one for a new one, no prob.
I don't care, really, but again, I'm curious if there is any quick, easy, user-friendly utility or method that I can use to return the speed performance I had as recently as a year ago? (I'd be satisfied with that).
Anyone willing to bite on that? Anyone willing to not critique, complain, tell me what NOT to do and actually know a solution?
IS THERE ANY SIMPLE WAY TO RETURN SPEED PERFORMANCE BACK TO (OR CLOSE TO) ORIGINAL FACTORY SPEED AFTER ABOUT 3 YEARS OF RELATIVELY STANDARD USE?
The only thing I may have done outside of the norm was some video editing, but very little.

Look for solutions here:
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

Post Moved Slow-speeds-after-6-months

M oved to Infinity board http://community.bt.com/t5/BT-Infinity/Slow-speeds-after-6-months/td-p/767428
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Hi Ryant, the test test says i should contact my isp, so i`ll give BT a ring. Cheers.

HTTP 500 ERROR AFTER EXCHANGE 2013 SP1 INSTALL

Help after exchange 2013 sp1 new install unable to get to the ECP or OWA page with HTTP 500 error in IE the install went ok but not sure what can be causing the error any help would be appriciated.
EXCHANGE 2013--SP1 on WIN2K12--R2 Standard
TY
M4326

See the following:
http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
CK

Decreased streaming speed after 10.5.7 update?

Has anyone had a decrease in streaming speed after the last mac security update package? I used to be able to watch video's direct from a site now i have to wait for a good 15-20 mins so i get a large buffer zone and then i can sometimes watch without interruption.

resolved...

Only getting 20Mb, but BT beta speed check says 35...

I've had infinity installed for around a week now.
The trouble is, I only ever seem to get 20Mb. I've run numerous speed tests on other sites, and all say almost exactly 20Mb. Uncanningly exactly 20Mb, infact. My profile is 38Mb, so no trouble there.
I've called BT and they pointed me to the BT beta speed tester, and that showed 35Mb. They decided that the line was therefore ok. This BT beta speed tester would appear to lie though, because I've tried http downloads, which maxed out at 20Mb, and numerous other speed tests, which all max out at exactly 20Mb.
Also, the other BT speed tester that tells you the profile you are on also only ever maxes out at 20Mb.
I mentioned all of the above to BT on the phone but they were adamant that because the BT beta speed tester said 35Mb, everything was ok.
I have confirmed this plugged directly into the modem, so it's not a homehub issue at all.
Can anybody offer any insight as to what may be going on?!
Many thanks.

Be greatful I was told I'd get 22mb, I get 11. BT have told me there's nothing they can do so I'll have to live with it. Shocking service

For better speed, will a MacPro 2.8 ghz or airbook flash drive and 1.8 ghz?

For better speed, will a MacPro 2.8 ghz or airbook flash drive and 1.8 ghz?

It's going to depend on what you are doing with the machine. If what you are doing is processor intensive, then higher clock speed would give more speed. Assuming though, that the higher speed processor machine is going to have a spindle drive, then if the issue is one that is drive dependent (and a lot of things are), then the MBA will generally be faster.
If you have a machine you are replacing, I'd suggest looking at whether the applications you are now using tend to absorb lots of processor time (are you hitting 100% CPU usage regularly) or spend most of the time excercising your hard drive (drive activity is constant). If the former, the Pro is likely the better option, while if the latter the MBA would likely do better.
Of course, if price is no object just get a Pro level machine with an SSD...

OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.

hi ALL
OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
Exchange environment contains 2 Exchange Mailboxesserver ,( one Failed , virtual Machine)
2 cas Servers
first databases could not be mounted but after we run the below command , users can use OWA but outlook could not connect
Start-DatabaseAvailabilityGroup -Identity DAG -MailboxServer MBX1
please support
thanks

Hi,
According to your description, I understand that Outlook client cannot connect to Exchange server 2013 while one member of DAG failed.
If I have misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account store in MBX1 experience this issue, users in MBX2 works fine.
Please run following command to double check the database status:
Get-MailboxDatabase –Status | select Name,Mounted,MountedOnServer
If it works in OWA, the issue may be related to Outlook side. Please run “Test E-mail AutoConfiguration” and “Outlook Connection Status” to get more details, expecial the setting of proxy server, it’s more helpful
for further troubleshooting.
Additional, please try to recreate a profile for testing. Besides, please move active DB back to MBX1.
Best Regards,
Allen Wang

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object?

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.

Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com

2700HGV - Trying to get Better Speeds

NilSatisOptimum asked for this, he is helping me to get better speeds. Anybody else, feel free to chip in if you have any suggestions.
BT 2700HGV stats:
I have got a new ADSL Nation faceplate coming tomorrow. I don't know if this will help but it's worth a try.
If my answer was helpful, please give me a star by clicking the star on the left hand side.
Thank you.

I think its down to ones experience of BT as whole and the confidence this brings! Openreach guys/girls at one point would give them freely, however no doubt a accountant somewhere had palpitations over this act of generosity! But its Openreach for me, as I wont get any better and it was free!, however never had the nation.
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Upgrading to better speeds after exchange upgraded...

Similar Messages

Maybe you are looking for