Upgrading to CS6 on Mac Mini Server. Keep getting errors.
My computer
Mac mini Server - Mid 2011
Software Mac OS X Server Lion 10.7.3 (11D50b)
Processor 2 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
I keep getting errors when I tried to upgrade to CS6 from CS3 extended.
Error report says:
Exit Code: 15
0 Fatal errors, 2 errors, 0 warnings
error: ASU has quit unexpectedly.
error: Media DB error : 18
Please help.
I even uninstall original CS4, install CS3 extended and try to upgrade. still getting errors.
HELP HELP HELP. SOS
How do you go to safe mode in mac? I created a new user and tried to instal but it still doesn't work. Anyone encountered such a problem?
Similar Messages
-
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin -
Mac mini server: Hardware test error on Hard Drive
Mac mini server: Hardware test error on Hard Drive
'checking for slow read failures': ERROR - Target device access failure - Test failed.
CAN I ACCESS HD (which is our data server) EVER AGAIN? IF SO, HOW?
Meanwhile we wonder if this is really a hardware error. It all happened during writing a time machine backup.
Probably while writing it, some data was relocated by accident, but we can not 100%-sure remember the sequence of actions :/
This is our trauma history:
- time machine got increasingly slower in writing a backup
- we quit the backup
- we switched off the mac mini (on power button)
- we switched on the mac mini
- we stopped time machine to the rules
- we shut down mac mini via command
- we booted the mac mini in save mode
- we see a loading bar
- no progress after 10th of loading bar
- switched off (power button)
- when we now switch on the loading bar below the apple-logo is all we see + the little wheel
- we started with cmd+alt+p+r pressed
- mac mini restarted but showed the loading bar scenario without progress again
- we started with 'd' pressed and did the hardware test (see above)
- we started with 'alt' pressed but it does not give us the recoverydrive to run the last backup
ANY IDEAS?
IS IT A SOFTWARE- OR HARDWARE ERROR?
THX IN ADVANCE!BDAqua wrote:
I thnk Intenal 2.5" Drives for servers is silly, & Ithink the Minis & iMacs re poorly cooled.
I'd get Temprature Monitor & see what temps they're running.
Is Temperature Monitor an app or a device? If it's a temperature problem then that is essentially a design problem. Two drive failures in the same Mac mini server in four months combined with the fact that they're not really user serviceable already has me 90% on the way back to more pragmatically designed Linux servers. I think it would be foolish to waste any more money on these minis for my business hosting. -
Mac OS X keep getting error message when extracting files for trail version of CS5 master suite.
Mac OS X keep getting error message when extracting files foUsingr trail version of CS5 master suite. I deleted all Adobe files and tried again several time and keep getting the same results.
What error message are you receiving? What version of Mac OS do you have installed?
-
My mac mini server keeps restarting
Hi
I have mac mini server with:
os x 10.8.3
2gh intel core i7
16 gb of ram
mid 2011
I use it as a server and it is usually on. Unfortunatelly, it keeps restarting here is my log file.Would you tell me what the problem is?
Interval Since Last Panic Report: 70771 sec
Panics Since Last Report: 1
Anonymous UUID: B34F4616-5193-4561-7B1E-F525020623F9
Thu May 2 20:11:02 2013
panic(cpu 0 caller 0xffffff8008ab7e95): Kernel trap at 0xffffff8008d11dfb, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff52b77de8, CR3: 0x00000001ce5f00d7, CR4: 0x00000000000606e0
RAX: 0x0028000000000000, RBX: 0xffffff803f460b20, RCX: 0xffffff8028a70808, RDX: 0xffffff8042fad0b0
RSP: 0xffffff81d990b980, RBP: 0xffffff81d990ba10, RSI: 0x0000000000000000, RDI: 0xffffff803f460b20
R8: 0xffffff81d990baa8, R9: 0x0000000000000000, R10: 0xffffff8042fad0b0, R11: 0x0000000000000246
R12: 0xffffff81d990baa8, R13: 0x0000000000000000, R14: 0xffffff81d990ba38, R15: 0xffffff803f459860
RFL: 0x0000000000010206, RIP: 0xffffff8008d11dfb, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fff52b77de8, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81d990b620 : 0xffffff8008a1d626
0xffffff81d990b690 : 0xffffff8008ab7e95
0xffffff81d990b860 : 0xffffff8008acd4dd
0xffffff81d990b880 : 0xffffff8008d11dfb
0xffffff81d990ba10 : 0xffffff8008b0f689
0xffffff81d990ba80 : 0xffffff8008b088a7
0xffffff81d990bc10 : 0xffffff8008b04ab0
0xffffff81d990bd90 : 0xffffff8008afd40c
0xffffff81d990bf50 : 0xffffff8008de063a
0xffffff81d990bfb0 : 0xffffff8008acdd23
BSD process name corresponding to current thread: httpd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000008800000
Kernel text base: 0xffffff8008a00000
System model name: Macmini5,3 (Mac-7BA5B2794B2CDB12)
System uptime in nanoseconds: 84427126826049
last loaded kext at 70660259808888: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f8a716000, size 16384)
last unloaded kext at 70826238872343: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f8a716000, size 12288)
loaded kexts:
com.Logitech.Unifying.HID Driver 1.2.0
com.Logitech.Control Center.HID Driver 3.6.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.nke.l2tp 1.8
com.apple.driver.AudioAUUC 1.60
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.AGPM 100.12.87
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleIntelHD3000Graphics 8.1.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.1.0
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.IOBluetoothHIDDriver 4.1.3f3
com.apple.nke.ppp 1.8
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.AppleUSBHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.2.6
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
System Profile:
Model: Macmini5,3, BootROM MM51.0077.B10, 4 processors, Intel Core i7, 2 GHz, 16 GB, SMC 1.77f0
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x0000, 0x563031443353463847423532383532383133
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x0000, 0x563031443353463847423532383532383133
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: ST9500420ASG, 500.11 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa130000 / 4
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0xfa133000 / 9
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa132000 / 8
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8281, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: HD Pro Webcam C920, 0x046d (Logitech Inc.), 0x082d, 0xfd130000 / 5
USB Device: composite_device, 0x04f9 (Brother International Corporation), 0x0180, 0xfd120000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Hi, try disconnecting any USB devices.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
Mac Mini Server Hangs, Gets Sluggish
New 2012 Mac Mini Server (2Gig i7 with 8GB memory). Server App is off, and I'm using it as a standalone unit. Running iTunes on an external Thunderbolt RAID. Running Safari with several tabs open. The iMac generally gets irratic within an hour or so: iTunes may be sluggish, Safari slows or stalls, then eventually the whole system hangs with the fan running at full speed. I have re-set the contoller by removing power for a while and then re-initializing. No help. Seems for a loaded iMac something is very wrong. Any guesses.
1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. This feature is transparent to the user, but internally Apple calls it "XProtect." The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
Gatekeeper has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's controls.
For more information about Gatekeeper, see this Apple Support article.
4. Beyond XProtect and Gatekeeper, there’s no benefit, in most cases, from any other automated protection against malware. The first and best line of defense is always your own intelligence. All known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore reduces to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
“Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
5. Java on the network (not to be confused with JavaScript, to which it's not related) is a weak point in the security of any operating system. If a Java web plugin is not installed, don't install one unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
6. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
7. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so can corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. If you don't need to do that, avoid it. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
8. The greatest danger posed by anti-virus software, in my opinion, is its effect on human behavior. When people install such software, which does little or nothing to protect them from emerging threats, they get a false sense of security from it, and then they may do things that make them more vulnerable. Nothing can lessen the need for safe computing practices.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use. -
Why does my mac mini server keep dropping off the network?
I have Verizon FiOS and use its router/wireless to connect all macbooks, macbook pros, etc. connect to each other and the snow leopard server, which runs the printers and time machine for one of the laptops. I'm not using any other heavy duty server apps. I just want the mac mini to stay on the network and do its job. Invariably when I go down stairs to the mac mini and ethernet to the router to share screen, I find some update that needs to be installed, which apparently is why the mac mini has gone on strike. I usually can see the problem when I go to connect to server and see the other macbooks, but not the mac mini. Then after much coaxing, I'm able to get the server back on line for a few days, until the next software update. The server is set to auto restart, but why is it balking at rejoining the network?
mac mini is running snow leopard, as are three of the four macbooks. router is an actiontec model. wireless network is WPA2 and mac mini is ethernet connected to the router.I've just experienced this problem when using a Marantz SR4001 receiver between my Mac Mini and HD TV. I noticed that the problem didn't happen all the time and I have found a workaround solution.
The problem is not a fault, but seems to be caused by the receiver defaulting the HDMI video properties. It's an old unit so I'm thinking that 720p is a default resolution for the receiver.
I can make the problem happen if the receiver is turned on before the TV. Seems that without an output connection the receiver is telling the mac that it expects 720p.
If I turn on the TV before the receiver, the TV seems to tell the receiver that it is expecting 1080p 25fps and the receiver obliges and the Mac retains those display properties.
So it appears that the video output device dictates the output properties back to the receiver and the receiver in turn back to the Mac. In absence of an output device the receiver defaults to 720p.
Solution: Turn on the TV before the receiver. -
There was a problem connecting to the server - Keep getting error message
Hi All
I have seen other people have had this problem and have tried most of their fixes but so far none of them have worked
I am running OSX 10.10 on a Macbook air and keep getting a message that pops up like this
I have tried the following
Disabling all sharing
Removing all login items for my user account (The only one)
I have never used time machine
Cleared my Recent lists of Servers
Reset the Sync Servers
Deleted System Logs (Only some from apps like Plex) which I thought may have cause my problem
and a few other things
It appears like that usually when the login screen comes up before I can even type my password, connecting to wifi networks and when attaching USB drives/storage device
Please help as this is driving me crazyCan I also just add I just tried booting into safe mode and the popup still appeared
-
After installing the x64 with all tools excluding the SDK from the SQL Express Edition, I go to Management Studio, log in and get the error when I click under the Instance name- Databases...Have reinstalled many times, removed all directories and registry
keys from both HKEYs(regular and Wow6432Node) before rebooting and reinstalling. No VS installed on this computer..put it looks like it installed "MS Visual Studio 2010 Shell (Isolated)-ENU" and "Visual Studio 2010 Prerequisites".....tried working past
the error, it just hangs the Studio after it tries to add things...HELP..PLEASE!!!
Object reference not set to an instance of an object. (Microsoft.VisualStudio.Platform.WindowManagement)
Program Location:
at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryService(Guid& guidService, Guid& riid, IntPtr& ppvObject)
at Microsoft.VisualStudio.Shell.ServiceProvider.GetService(Guid guid, Type serviceType)
at Microsoft.VisualStudio.Shell.ServiceProvider.GetService(Type serviceType)
at Microsoft.VisualStudio.Shell.WindowPane.GetService(Type serviceType)
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerToolWindow.GetService(Type serviceType)
at Microsoft.VisualStudio.Shell.WindowPane.System.IServiceProvider.GetService(Type serviceType)
at System.ComponentModel.Design.ServiceContainer.GetService(Type serviceType)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.GetService(Type serviceType)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.System.IServiceProvider.GetService(Type serviceType)
at System.ComponentModel.Design.ServiceContainer.GetService(Type serviceType)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetService(Type serviceType)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NodeContext.GetService(Type serviceType)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.<GetColumnsFromNavigationService>d__11.MoveNext()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.AddFields(List`1 list, IEnumerable`1 fields, IDictionary`2 allValidFields, AddFieldsFlags flags)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.GetParentFields(INodeInformation source, Dictionary`2& allValidColumns)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequestChildren(IGetChildrenRequest request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren(WaitHandle quitEvent)Hi igorteper,
Any progress?
"MS Visual Studio 2010 Shell (Isolated)-ENU" and "Visual Studio 2010 Prerequisites" had been installed in your computer, or there is no Visual Studio installed on this computer?
You log in SQL Server Management Studio and get an error. For further investigation the issue, please post the error messages in detail.
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread. -
I upgraded to 8.1 and now I keep getting error messages when I try to receive email
One I upgraded I am continually having problems trying to receive email via outlook. An error message appears. Any ideas on how to fix this?
sound like the hard drive is starting to go out. you may want to contact Apple for service and repair options.
-
I tried to sync Firefox mobile to my PC. Then I tried to upgrade to Firefox 4.0, which was a mistake, because I already had 4.0. I checked yes to install it again. Then I tried to uninstall and reinstall 4.0. That is when I started getting the error message.
i have been trying to figure out how to fix this same issue as well for the past 2 hours or so. it is very upsetting that you can't even uninstall it try to redo it all or just use the old version. everything seemed to be ok untill i got to the set up part of the process that is when i kept getting the same message: ''your computer must be restarted to complete a previous upgrade of firefox. do you want to reboot now" and to no avail. please help. i really enjoyed my firefox/mozilla. now i can't even use it i have to go back to internet explorer for now...........
-
Trying to reinstall mac os x. keep getting error.
i reinstalled mac os x and now it asks me to insert "mac ox x install disc 2" after i do that it starts installing fine. after a few minutes i get a message that says there was an error try again later. i have restated and it still does not help.
I have a 15" Powerbook 1.67 Ghz with 512 GB of ram. I inserted Disk 1 and clicked on install mac os. It restarted. I followed the instructions and the instructions in my booklet that came with the computer. It then asked me to insert disk 2. It starts installing. Then I get an error. It does not tell me what the error is. Only tells me to try again. The system is now stuck on that screen. When I restart it asks me to insert disk 2 and then starts to install and I get an error. I am stuck.
-
How do you resolve an issue when creating groups on a Mac Mini Server when this error message appears.
"Unable to get Users & Groups State, The Open Directory master was created, but a problem was encountered trying to refresh the state of the server. Check log files for more info."Most likely, the Server was not configured correctly - DNS is a common issue, If DNS is not configured properly, OD will not be happy. You can run
sudo changeip -checkhostname
in Terminal to see of DNS is up and running.
Here's a great tutorial (not mine) for setting up OS X Servers. The page says it's for a typical school environment, but it can be applied in many other environments.
http://www.wazmac.com/servers_network/fileservers/osxserver_setup/index.htm
hth
Jeff -
Trying to install PSE11 in new MacOSX. keep getting error message:inconsistency in installer datab s
trying to install PSE11 on new mac OSX.. keep getting error message:inconsistency in installer databace...restart computer and reload... well thats what I've been doing for six hours now... I don't know if its a mac or Adobe problem, but I'm getting PO'd at both of them
Try http://forums.adobe.com/message/5048299
-
Mac mini Server mid.2010 upgrade to Mavericks?
Hi, my Mac mini Server (2.66GHz Intel Core Duo, 8Gb RAM) running OS X 10.8.5 does not propose me to upgrade to Mavericks through "Software Update". Does it mean it's not safe to upgrade? Why do I read that a Mac Mini more recent than 2009 can run Mavericks?
My Mac Book Air upgraded through "Software Update" so I did not do anything with the Mac mini yet. Any advice on wether to upgrad or not is appreciated. I do not use the Server part, I understand that if I upgrade to Mavericks I'll have to pay for the upgrade of the Server should I need it.
Basically my question is why doesn't the Software Update propose me to upgrade my Mac mini.OS X Mavericks requires an Early 2009 or newer Mac mini. As your Mac has got an Intel Core Duo processor, you shouldn't be able to upgrade, but to check this, open the Mac App Store and try to download OS X Mavericks. The Mac App Store will show an error if your Mac is not compatible.
If it's compatible, you will have to purchase OS X Server after upgrading. Make a backup of your files with Time Machine and check that your applications are compatible > http://www.roaringapps.com
Maybe you are looking for
-
I have a Mac mini OS X 10.4.11, intel core duo processor (not core 2 duo), with 512 mb and 1.83 GHz processor. I only have version 9.0.3 of iTunes because it hasn't let me go higher, which I believe is because of the operating system. I want to get
-
Help with installing a CHAT CLIENT/SERVER
i cant seem to get my chatclient or chatserver to successfully connect to my server. even if i do a local host 127.0.0.1 thing it STILL says that it cannot connect. the server is a stand alone. is there a general place to install the compiled files?
-
Hey all, I recently bought an HP all in one Touch as well as Adobe elements 8. My computer resolution is set at 1920x1080. I shoot in 16:9 widescreen standard defintion. I also edit stills and video in the same aspect ratio. Whenever I create graphic
-
API in Solaris 5.8 like "_spawnlp" in windows
_spawnlp(); Does anyone know other command in solaris 5.8 that could do the same job of _spawnlp in windows?
-
Hi all, With the Outbound module in UCCX 8.0, we were wondering whether it was possible to show agents more info about the contact they will be calling (when reserved for an outbound call) besides the 6 fields in the Dial List (account number, first