Upgrading to Intel iMac version

I own Photoshop CS v8.0. How can I upgrade to an Intel iMac compatible version?

Photoshop CS is too old to be eligible to upgrade to anything.
You'll either have to purchase a full version of CS6 or join the Creative Cloud.

Similar Messages

Upgrading my intel iMac to internal SSD and running 1TB external drive from firewire 800 for mass storage while still using a second external drive for backups...my goal-speed with a SSD, to still have 1TB of room for everything i have now..possible?

I seem to kill HD's every two years...the last two i've installed were WD Caviar Black 1TB 7200rpm 3.5" drives. The speed gains over stock drives have been remarkable. I don't blame the drives for the failures, my machines are up and running 16 hours a day, every day, year round. They die from 'mileage' so to speak...i assume...there's no viral acvtivity or questionable downloads to gunk things up...just lots of work.
I have my third new drive ready to install in my intel based iMac...but i've had a thought...I want to install a SSD in my iMac for the speed gain (and recent price drops)...for standard storage i want to use this new WD Caviar Black 1TB in an external drive bay and connect via firewire 800 for storing everything except the OS and my most commonly used software...am i crazy? will the firewire 800 external drive negate the speed gained with an internal SSD??
I have four iMacs in my office, and one at home. I buy second hand and install new drives and boost memory. I'm going to do this on my 'home' machine...if it works out well i want to upgrade the other three this way...but first i need to know if i'm just dreaming, or will it really make a difference? or even possible??
Thanks!
2.66 intell core2duo
2009 iMac
8gig ram
1 gig hd
OSX ver. 10.8

The SSD gives great bootup and Application launch speed. I think it also speeds up the video rendering a bit, I do all that on the SSD and then move the finished project to the external drives. As far as the speed for the external drives they are quick enough for viewing video and the file transfer rate is good. I had initially put the SSD into an external cradle (FW800) and the system was faster than on the internal drive. I only got a 1.5GBs SATA drive, perhaps yours could benefit from the 3GBs. I know the 6GBs would be too fast and costs a lot more, even the MacPros need special hookups to make use of the 6GBs.

Intel iMac install disc versions

I have a big favor to ask of all you forum members. I have install media from different intel iMacs that I need to distinguish from one another. As far as I know, the discs from a 17" iMac with integrated graphics will not work on a 17" iMac with Radeon X1600 graphics, nor will they work across the Core Duo to Core 2 Duo bump. I'm looking for the AHT and any other distinguishing information from these discs so I know which iMac they belong to. Here's what I know so far:
17" Core Duo w/ integrated graphics:
• AHT version 3A108, Disc version 1.0, MacOS 10.4.7
17" & 20" Core Duo w/ Radeon X1600 graphics
• AHT version 3A100, Disc version 1.1, MacOS 10.4.4
All other models I do not know. Can those of you with other models post your install disc versions? I'm looking for all the intel iMac version from when they were released (though I believe I have the first generation above) through the iMacs available right now, as we have all kinds on our campus. Please include the disc 2 version (the 2Z691-xxxx-x number) as well.
Thank you to everyone who can contribute!
17" Intel iMac Mac OS X (10.4.9)
17" Intel iMac Mac OS X (10.4.9)
17" Intel iMac Mac OS X (10.4.9)

Unfortunately I can't give any detailed information since I only have the original iMac CD (disk version 1.0) but until others chime in, here's some information that might be helpful.
AFAIK, it should be possible for the latest version of the OS/Install to work across all iMacs but not the reverse (my original DVD will not boot one that requires a more recent version of the OS or the newer C2D architecture). That being said, each install media set should have the OS version appearing on the disc. You may be able to deduce (or narrow it down) by comparing the OS version and the time the specific iMac model was released. The more recent the Mac revision, the more recent the OS (or at least that is usually the case).
10.4.4 January 10,2006
10.4.5 February 14, 2006
10.4.6 April 3, 2006
10.4.7 June 27, 2006
10.4.8 September 29, 2006
10.4.9 March 13, 2007
The Core Duo iMac debuted in January 2006 and should have (initially) come with 10.4.4.
The Core 2 Duos debuts (I believe) in September of 2006 and likely shipped with 10.4.7 (or 10.4.8 although the first one is more likely).
Not much help, I know, but it's a start.

Intel imac slow to to to sleep since 10.6.8 update

Since upgrading my Intel iMac to 10.6.8 a few days ago, it is slow to go to sleep. After clicking on sleep, (or using Opt/Command/Eject), it takes between 20 and 30 seconds to go to sleep. Same problem when shutting it down. Restart is still as fast as before. I used Disk Utility to check the permissions and had to run Repair, because the permissions were so messed up. Restarted it after that, but sleep problem continues to exist. I want to upgrade to Lion, but wondering if I should figure this problem out first. Any ideas? Thanks!

Got the answer on another question - consider this solved! (i was using older keystroke commands).

How do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS x 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

how do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS X 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

Retail Leopard disc looks like this;
(The disc itself has the same logo). If the one you've got is grey it simply won't work.
Given the retail and second hand prices of Leopard (usually some on Amazon MP), you'll probably find it cheaper to go directly to Snow Leopard, although there could be software updates and printer driver problems that could nullify the difference.

Can an Intel IMac running Tiger Upgrade Directly to Snow Leopard?

This may be a dumb question, but I have an Intel Imac that I've never upgraded the OS on. My fiance has a new version, and we just installed Ilife '09 on hers, but my OS isn't new enough to install it on mine. Is Snow Leopard even an option for me?

Is Snow Leopard even an option for me?
Yes, if the computer meets the system requirements. Use the Mac Box Set.
(47416)

What older versions of PS Elements are compatible with my older iMac?? I'd like to upgrade to an newer version (eg. versions 7-10) that will run on my old iMac. Some versions are PC only.

What older versions of PS Elements are compatible with my older iMac?? I'd like to upgrade to an newer version (eg. versions 7-10) that will run on my old iMac. Some versions are PC only.

And which model imac? Is it a G5 processor or Intel?

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

What hard drive can I upgrade with on iMac intel early 2010

what hard drive can I upgrade with on iMac intel 27 inches early 2010

You can install any 3'5" SATA hard drive on a Late 2009 iMac. Have a look at OWC > http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
Note that Late 2009 and later iMacs have got the temperature sensor inside the hard drive. If you install a hard drive without a sensor, fans won't work correctly. Read > http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs

Upgrade Graphics card for 2007 24in Intel iMac...any word yet?

Hello, I remember talking about upgrading my 128mb graphics card on my 2007 24 inch Intel iMac a while back. people said it was possible, but now that two years have passed almost, have they come out with new cards that fit this machine? what is the best to use and where do I get one?
Is it easy enough for me to do myself or should I have it installed professionally?
Thanks!

Unfortunately not these machines were not intended to have graphic card upgrades therefore no graphics card upgrade is available for your iMac.
If you want an upgradeable machine the next time your purchase I would recommend looking at the Mac Pro which is designed with upgradability in mind, including memory, hard drives, and yes graphics cards.

I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is t

I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is the easiest way to do this

Glenn,
I tried upgrading to leopard, even bought the software and brought it home but it wouldn't let me. So i went back to apple, gave them the specifications of the machine and been told my machine is simply too old for leopard. This is incredible to me because it really isn't THAT old (i think just a little over 6 years maybe) and yet i'm left out on the curb when it comes to using newer apple products. I understand technology moves on but the mindset that i am supposed to dump a perfectly working machine after a couple of years or face not being able to use any other apple product is counter to what thought apple was about.

Upgrade from 10.4.11 to leopard on White 24"intel iMac?

I am totally new to MACs and purchased a white Intel iMac for my daughter. It came with a Leopard upgrade or install disc. What is the preferred method to upgrade the system? I have nothing in data at all, its brand new. Should I just do the upgrade from the disc, or an erase and install or archive and install?
For example, does leopard work better with a fresh install or does it make no difference compared with an upgrade install? Any help appreciated. I am afraid to put leopard on it because it works great now and starts up in a unbelievable 15 seconds from power on to cruise-in the net.

In your case you must do an Upgrade install as that is the only option for an Upgrade disc. I would do the following:
First,
Repairing the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Next, continue with Leopard upgrade and follow the instructions provided.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Upgrade Intel iMac's RAM from 3GB to 4GB and change Graphics Card

Hi,
I have 20" Intel iMac (November 2008) and it has 3GB of memory as of now. I would like to upgrade it to 4GB. I need to know if Apple will do this for me at my local Apple Store and how much this will cost. Also, I want to change my video card from ATI to Nvidia. Is this even possible? If so, please give me some details about it. I am more concerned abut the RAM issue.
Thank You!!!

They almost certainly will be willing and able to do that, but you'll have to get an estimate from the store on the cost. To get a ballpark figure, check Apple's website and see what 4GB of DDR2 SO-DIMMs would run you, then add about $100 for labor. Honestly, there's no real point to paying someone to do this. All you do is take a Philips #2 screwdriver to the screw on the little panel at the bottom of the iMac. Once you losen that, the panel comes off, and there are little black plastic flaps that let you pull the RAM out so you can grasp it with your hands. Then you just push the new RAM in until you feel it snap into place, fold the black plastic tabs over it, and put the panel back on. Once you have the RAM, it'll probably be a 5-10 minute job, tops. Just be sure not to do it while the system is on or plugged in. If you do it yourself you can buy DDR2 SO-DIMMs anyone. Apple will charge a hefty premium because they have to cover the costs of potentially having to replace them under warranty.
As for the video card... It's technically possible, but it would be so ridiculously expensive for just swapping the equivalent nVidia card for your ATI one, it would be downright stupid to pay to have it done. So for all practical purposes, it's not possible.

Kernel panic after trying to update to version 10.4.10 (Intel iMAC)

Hi all,
yesterday evening I wanted to install (via automatic software update) the new software update "Mac OS X 10.4.10 (Intel)" on my intel iMAC. Unfortunately the installation failed and I don't know why. Having not yet restarted I tried the installation again but again it failed.
Then I restarted my iMAC and since then I get every time now a kernel panic: 'Unable to find driver for this platform: "ACPI"' ... Kernel version: Darwin Kernel Version 8.9.1 ...
I tried already several things like
- booting in safe mode (holding <shift>): not possible
- hardware check (holding 'D' with MAC OS X DVD #1 in drive): detailed hardware check ok
- reset of PRAM (holding command-option-p-r): didn't help
- starting in single-user-mode (holding command-s): get same error (panic)
- start in "open firmware mode"(holding command-option-o-f): not possible
I'm just a MAC user sind February of this year and not yet that experienced with kernel panics and how to overcome such a problem. I hope that someone more experienced can give me a hint or a solution description how to get my iMAC running again.
Thanks for any help,
Michael
Intel iMAC Mac OS X (10.4.9)

Start with http://www.thexlab.com/faqs/kernelpanics.html for some steps to try.
Since you're a newcomer to the Mac, peruse Switching from Windows to Mac OS X and Basic Tutorials on using a Mac.

Upgrading to Intel iMac version

Similar Messages

Maybe you are looking for