Upgrading to Itunes 10 problem
Everytime I try to install Itunes 10 I get a message that says "service 'bonjour service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services."
I have no idea what to do. Can anyone help? pls
Let's begin by checking on the status of the BonJour service in Services.
If you've got XP, in your Start Menu right-click My Computer and select "Manage".
If you've got Vista or 7, in your Start Menu right-click Computer and select "Manage".
Expand "Services & Applications"
Click "Services". (Maximise the Window to better see what is going on.)
Find the BonJour Service. What is listed for it under Startup type and Status? In particular, under Status, is it saying "Stopping"?
(Sometimes it gets jammed on "Stopping", which can cause the installation error you're getting.
Similar Messages
-
Upgraded to itunes 6 problems!
I just updated itunes to version 6 and it asked me to re authorise my bought music. This used my last authorised computer!
What can I do as I didn't wnat that to happen!Version 6 reconverted all my bought music back to m4p! So, check your previously bought music.
This is such a bummer- it's going to take me serious time to find all that music in my cds and reburn onto my Mac. -
Upgrading to Itunes 8 problems
I just purchased an IPOD 160G classic to replace my 80G classic. It won't sync with my Itunes cause I have ITunes 7, and apparently the new one needs Itunes 8. I have tried to install ITunes 8.2, but have not been successful. The install goes through until it gets to the end, and then I get the error messag.e It keeps telling me that I don't have the authority, although I have admin rights. I am running Windows XP.
My other computer is a desktop running windows XP, and that one tells me it can't find the installer.dll...
Help?
Thanks in advance.Never mind. I got 8 installed.
-
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Problem with videos after upgrading to iTunes 9.0?
Something went wrong with my videos after I upgraded to iTunes 9.0! The videos are twice as long as they were originally. Let's say this video was actually 1 minute long. It is now 2 minutes long. For the first minute it plays normally, then for the second minute, it just repeats itself, but with no sound.
Is anyone having this problem? I uninstalled and reinstalled Quicktime, but that didn't help at all. Help!@atpcliff,
You mean, the vids you purchased from the official iTunes store does not play on iTunes itself....?? :O :O That shocks me to the core. May be the DRM-protection present in the files you purchased previously does not support the newest version of iTunes. Try calling the Apple support for help and explain them your situation. Otherwise, you might have to roll back to the previous working version of iTunes for those videos to play, since they wont play on other video players anyways.
@threadstarter,
Hmm...Is your issue fixed by now ? Any work-arounds ? I suggest you try this : Uninstall all Apple products installed in your computer, like iTunes, Quicktime, Apple Mobile Support, Apple Software Update, Safari Web Browser etc. If you have trouble in uninstalling them, try uninstalling them in safe-mode. IMPORTANT : Take a back-up of all the files you purchased from iTunes Store. Now use CC Cleaner and remove all registry logs related to Apple products. Restart your comgputer in between each of these steps. Now install the latest versions of all the products afresh. I think this should work. Do revert.
Message was edited by: roh_style -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1). Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. NO ERROR MESSAGE THOUGH. Just a No Content in the Music App in the iPhone. Any ideas ???
Bump!
-
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
I just upgraded to iTunes version 10.6.0.40 and now I am having problems connecting to my Airport Express and I get an error message 15000. Does anyone know what that means? I am using an ethernet cable so it is not a wireless problem. Trying to find out if this is realated to the iTunes upgrade. Any ideas out there?
Sure...
See this Apple article for a Hard reset of a Factory reset.
http://support.apple.com/kb/HT3728 -
Problem with audio configuration after upgrading to iTunes 7.5
After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.
Try the instructions in this article.
(26574) -
Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help.....
I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing
-
Problems after upgrading to iTunes version 6
Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP -
I am trying to upgrade to itunes 10.5 on my pc which is using windows xp but i keep getting an error message stating that there is problem with this windows installer package. A pogram run as part of the setup did not finish as expected. Contact your suppor personal or package vendor.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Neither my iphone nor my ipad would appear in itunes when i connect them to my mac. I have already upgraded my itunes to the latest version. I have no problem synching my ipod to itunes using the same mac though. Could it be because I am using an older mac? (Mac OS X version 10.4.11)?
You need to be using a Mac OS X version at least as new as the one given in the device's original system requirements.
(74595) -
Using 2006 iMac running Mac OS 10.6.8.
My iTunes App (11.3.1) will not launch.
Upgraded to iTunes (11.4) but problem persists.
Need help.I have no answers for ya, but I do have the same problem, so we are not alone in this.
My iTunes stopped working after I did a couple of software updates that got my iTunes up to v. 11.4. Since that update, I can't get iTunes to open at all, neither from my dock nor from the Applications menu.
I'm wondering: Perhaps these latest iTunes updates are simply too advanced for my 10.6.8 operating system? If that's the case, how can I backtrack to an earlier version of iTunes that is compatible with my computer OS?
Any thoughts?
Maybe you are looking for
-
I tried to download a free app. It came up with an error message saying it was too big to download and that I need to connect to WiFi. The icon is still displayed and I can't delete it (I've decided I don't want it. Can anyone tell me how to delete i
-
Problem while generating stub and skeleton in ejb
Hi All, I am learning Ejb,i developed a simple hello world application .And i am trying to generate stub and skeleton for that using weblogic.ejbc.I am getting the following error C:\nkmb\ejb\HelloEjb>java weblogic.ejbc slb.jar <Jun 22, 2006 9:55:35
-
Macbook pro express card connected hard drives get disconnected
I have a Macbook pro 17" 2010 i7, my external drives are getting ejected misteriously when the system sleeps and wakes up, i have this problem with esata, USB3 cards and all kinds of encolsures, running 10.7.2, help, its driving me crazy!
-
Why am I having so much of a problem downloading Lion
I have a MacBook Air and I'm trying to download the new Lion software. It's not downloading! Anyone know why?
-
Error Exporting Single data form LCM
Hi, When i try to migrate specific data form it gives me this error "EPMLCM-37061: Listing has no entries" Any help. Regards.