Upgrading to itunes version 10.6.3

I need to sync itunes to my new iphone 4s but itunes won't recognize it until I upgrade to the newest itunes version. However, when I click "Upgrade to itunes version 10.6.3" nothing happens. It's as if I never clicked it. I really need help!

Download directly from here and install.
http://support.apple.com/downloads/#itunes

Similar Messages

I just upgraded to ITunes version 10.6.0.40 and now I am having trouble connecting to my Airport Express. I get error message 15000. I am connecting with an ethernet cable so it is not a wireless problem. Any ideas?

I just upgraded to iTunes version 10.6.0.40 and now I am having problems connecting to my Airport Express and I get an error message 15000. Does anyone know what that means? I am using an ethernet cable so it is not a wireless problem. Trying to find out if this is realated to the iTunes upgrade. Any ideas out there?

Sure...
See this Apple article for a Hard reset of a Factory reset.
http://support.apple.com/kb/HT3728

Smart playlists won't play on video ipod after upgrade to itunes version 7

Upgraded to ITunes version 7 on Windows XP using Video Ipod with firmware level 1.2. Resynced Ipod after Itunes upgrade. Now when I hit ipod's play button on a smart playlist, nothing happens. If I hit play button from itunes, no problems...
Is this a known issue with a solution? I was unable to find a solution in the forum. Thank you for any assistance.
ThinkPat A31p Windows XP
ThinkPat A31p Windows XP

This problem only occurs when podcasts are included in the playlist. Full restoration of IPOD did not resolve problem.
Contacted Apple support after a 45-minutes hold time; the support staff were not helpful. Won't invest in a support agreement with Apple going forward...

TS1717 Gentlemen, Your upgrade for ITunes version ll.1.4 has failed to load. And reloading does nothing but raise my blood pressure. I am not alone with this experience as I go on line I see the ITune world getting the MSVCR80.dll missing message . Wa

Gentlemen, I have wasted a day and probably lost my entire Itunes music collection by allowing an upgrade of Itunes version 11.1.4 Interesting because the other upgrades were routine. This failed to load and the message of missing MSVCR80.dll file and verify that you have sufficient privilege to start system service are of little comfort. Have re-installed numerous times to no avail. Wassup? I need help.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Can't upgrade to iTunes version 9.1.1

I have a 7 year old PC. My iTunes files are all loaded onto my external hard drive. When attempting to download the latest version of iTunes 9.1.1, I receive the following error message"
"Errors occurred while installing the updates. If the problem persists, choose Tools> download only and try installing manually." I tried installing manually and I still am getting pop ups indicating "Do you want to dowload the latest upgrade of iTunes version 9.1.1?" This leads me to think that there might be something wrong on my end. Any advice?

Are you doing this through iTunes or the Apple Software Updater?
If so, try going to the itunes download page and SAVE the setup file to your desktop.
After it has completely downloaded, double-click on iTunes Setup.exe to run it....make sure itunes is not running, first.
http://www.apple.com/itunes/download/

Just upgraded latest Itunes version & it doesn"t Sync

Just upgraded latest Itunes version & it doesn"t Sync I tried reinstalling Itunes with the virus checker off. Also, I used cables instead of wifi but my ipad & Iphone still don't sync. Any ideas Thank You

Hi am33m,
Sounds like iTunes Match hasn't sync'd the songs properly. Am I correct that on iOS devices the songs appear greyed out? I've had this problem as well recently. You could try going back to the computer you added the songs on, selecting them from your iTunes library and deleting them but telling iTunes to keep the files.
I did have some luck following the steps at https://discussions.apple.com/message/18597236#18597236 however that was short lived and stopped being effective shortly after. You may have more success.
1. List all your songs in your library and right-click the column headers to show iCloud Status
2. Sort by this column and look for all of the tracks at Waiting Status
3. Select all of the tracks at Waiting Status, right click and delete them, click Delete Items on the first prompt as shown below (This won't delete your music from your computer):
4. IMPORTANT: At the second prompt that appears after you click Delete Items select Keep Files
5. Select Add to Library from the File menu and navigate to your iTunes folder in the Music under your Home folder.
Leave iTunes to rebuild your library (it might take a while if you have a lot of tracks that were at waiting status). Once it is complete, update iTunes Match once it's finished and it should upload the tracks
Following that process should rebuild the song information for those tracks in your iTunes library and may help iTunes Match sync up properly. If it doesn't let me know as there are some people including myself that haven't had much luck lately getting past this issue.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Itunes 11.1 upgrade from itunes version 10.6.3, OS v. 10.6.8, will not work

Please help if you can. Bought a iphone 5s. Need itunes 11.1 to activate and backup. Needed to upgrade the OS to 10.6.8 from 10.5.8 on older macbook pro. Installed sucessfully. Downloaded itunes 11.1 from apple site. Installed it. Installer says it was sucessful. Open itunes, and it is still version 10.6.3. Tried numerous times, same results. Please help.

Open iTunes directly from the Applications folder.
(90456)

If I upgrade my iTunes version AFTER using iTunes Match, will everything still be saved (in the cloud)?

New to iTunes Match, using it in hopes of freeing up disk space. Haven't had enough room to update iTunes to the most recent version that came out with iOS7, and now that I finally have enough space to upgrade iTunes, I'm worried my iTunes Match music will be wiped or that I'll have to start all over again.
Any information or advice would be greatly appreciated. Thanks!

Hi,
Do make sure that you have a suitable back up before deleting tracks from your computer. Read this https://discussions.apple.com/docs/DOC-4112.
Updating to the latest version will not wipe itunes match music and you will not need to start all over. It is not usual for updates to cause problems but it alway good practice to maintain a back of all your music.
Jim

HT4972 No matter which of your confusing directions I try to follow, I am unable to upgrade my iTunes to the latest version which "must be done" prior to upgrading my iPad 2 to IOS 5. PLEASE HELP!!

Please help me to upgrade latest iTunes version so then I can upgrade to iOS 5 or 6. I have an iPad 2. Thank you.

You need to update iTunes on your computer (not the iPad) to the latest version in order to then update the iPad to iOS 5.1.1 (iOS 6 isn't released until the Autumn) - you can check if you are up-to-date (which will prompt you to update if you aren't) via, on a PC, 'Help > Check For Updates', and on a Mac 'iTunes > Check For Updates'
When you have that installed, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

For new itunes version, how transfert Iphones content to Itunes

Hi Guys,
I try to import my whole stuff buy in Itunes store before upgrade the Itunes version.
Someone can help me because I don't know how I can transfert the shops stuff in
my Itunes application before upgrading the Itunes version...
Sorry for my bad english and many thanks in advance.

Here's how to transfer your content from your device to your computer

HT1199 I upgraded my iTunes player on windows 7 and the upgrade did not complete successfully. Attempts to open itunes gives an error that msvcr80.dll is not installed. Attempte to run the upgrade againa and repair iTunes was not successful.

How to install msvcr80.dll after attempted upgrade to iTunes version 11.1.4 on Windows 7?

This worked for me
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I'm Having Trouble upgrading to itunes 7.0.2

My computer won't let me upgrade to itunes version 7.0.2, I'm currently at some version of 6.0. I think it's doing some wierd error or something. Halfway through the download a pop-up comes on my screen and say cannot access HKEY, the address of the HKEY is: HKEYLOCALMACHINE\Software\Classes\QuicktimePlayerLib.QuicktimePlayerApplCLSID. The pop-up says this key cannot be accessed and then says to verify I have access to this key (which I don't know how to do) or contact my support personnel. So can someone please help me fix this problem, or else I will never be able to upgrade.
Windows XP

I was having the same problem, but then i ran the Windows Installer Utility clean up and removed QuickTime, and tried downloading iTunes with QuickTime again, and it worked perfectly, i was so happy. so it couldn't hurt to give it a try.
http://support.microsoft.com/kb/290301
There are instructions on how to use it (very simple though), and the link to download it is near the bottom of the page

Need help installing new itunes version on older mac for nano syncing

I purchased a new nano and new music, but can't get the nano sync because desktop mac is requesting me to upgrade the iTunes version.
When I do, it says "This update requires OS X version 10.7.5 or later." How does this get done?

Which exact model computer? To get more information about your computer, go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
https://www.apple.com/support/ipodnano/6th_generation/getstarted/
Basically you're stuck unless you can upgrade OS. There's no other way to transfer music to the device.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Upgrading to itunes version 10.6.3

Similar Messages

Maybe you are looking for