Upgrading to Latest Patch

Hi
Can we upgrade 2005 B from patch level 5 directly to patch level 40 (which is latest)?
OR
Do we need to upgrade all the patch levels one after the other ( patch 5 then 10 then 20 then 34 etc ) untill we get the final patch level which is 40 ?
which is correct.
Thanks
SV Reddy

reddy,
you can directly upgrade it to patch level SAP B1 2005B PL40.
no problem,there are documents at
document resource centre in service market place.
www.service.sap.com about patch upgradation,you
can also use it as a guide.
Jeyakanthan

Similar Messages

IMac G5 fails to start after upgrading to latest patch

My iMac G5 will hang every time I start it now since upgrading to Leopard and applying the latest patch. Most of the time I get to the gray apple screen and no further. I have to force a shutdown with the power button and try again. Most of the time it now takes me 2 or 3 tries to get the computer started.
I hate to say it but since upgrading to Leopard my Windows PC has been more reliable. This is the worst upgrade I've ever been through and that includes Windows upgrades!
Anybody have any insight as to why this is?
Thanks

Try booting from the Leopard DVD. Hold 'c' when the computer starts. You can then go into disk utility and try to repair/reinstall.

Should we follow the sequence while upgrading to latest patch level?

Hello,
While applying patches in any module say HR,if my current level is SAPKE60028,Can I dirrectly download SAPKE60034
& upgrade it or should I follow the sequence?
SAPKE60028,SAPKE60029,SAPKE60030,SAPKE60031,SAPKE60032,SAPKE60033,SAPKE60034.
Regards,
Rachel.

Hi Rachel,
You cannot directly upgrade from a lower level SP level to higher SP level directly for ABAP stack by skipping the ones in between.You will have to follow the sequence and it will also not let you to proceed say from SAPKE60028 to SAPKE60030 unless you have the SAPKE60029 in between.The prior level is checked as a prerequisite in order to advance to the next level.
However, for JAVA statck upgrade it is possible because in Java whatever patch level u choose it is consolidated.For instance, if you are at patch leve 12 at present and want to upgrade to level 17 then the patch level 17 is a consolidated package consisting of all the levels from 1 to 17.While upgrading it removes all the existing previous SP and deploys SP level 17 right from the beginning i.e level 1 to 17.
Thanks,
Saby..

CMCOLL patch4 ....... (UPGRADE EP TO THE LATEST PATCH)

hi,
I successfully installed patch 4 of portal server. Now i want to upgrade it further to patch 29. But before applying this patch, is there any need to apply CMCOLL patch first? Is there any dependency?
For applying CMCOLL patch 4 i am refering to SAP note 736243.
Acc. to it, first i'll have to deploy CMCOLL patch4 thru SDM. and the next step is "Deploy Portal SP2 patch 4 Hotfix 3".
Now here the problem is, before applying hotfix 3, i need to install hotfix 1 and 2. But if i am applying the next patch to portal server, then there is no need to install the hotfixes for the current patch. And if i am upgrading it (portal server) to the latest patch, then again my first question of dependency 'll arise.... Now i am totally confused.
So in brief, wat i want to do is,
1> upgrade SAP J2EE engine to PL29 : This has been done
2> Patch portal server with PL29 : Patch 4 applied successfully
3> Patch CM&COLL with PL29 : CM_COLL version=60 SP2 Patch 3 Hotfix 3
If u want the procedure how i installed patch4 of portal server : EP6 sp2 patch 4 problem .........
urgent help required ....
bye n thanx.....
rgds,
RangeR
Message was edited by: ranger

>>Upgrade CM&COLL to SP2 Patch 4 as described in SAP note 736243
Tht means, b4 this, i need to install hotfix 1 and 2 of portal server. (I dont know whether hotfix 1,2,3,4,8 are avialable for portal server patch 4 and if yes where?)
then while applying CM&COLL patch 4, next step would be apply portal server patch4 hotfix 3.
>> Apply Hotfix 8 (newest) for Patch 4 as Hotfix 4 is a prerequisite for installing CM&COLL SP2 Patch 5. (SAP Note 786452).
I didnt get, wat to install next? CM&COLL patch 5 or portal server hotfixes ..... and is there ne SAP note available to install CM&COLL patch 5?
and 1 more question, when applying CM&COLL patch4, i need to stop the servlet engines ..... but i dont know how to stop it or rather i dont find it newhere... the only service running in cluster with this name is servlet_jsp .... is this the same service which i need to stop
reply ASAP ....
rgds,
RangeR
Message was edited by: ranger
Message was edited by: ranger

What is the latest patch level for SAP CRM 7.0

Hello Experts,
I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
Thanks,
VSK

> I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
http://service.sap.com/patches
--> SAP Application Components
--> SAP CRM
--> SAP CRM 7.0
--> Entry by Component
--> CRM Application Server ABAP
--> SAP CRM ABAP 7.0
--> Support Packages
Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
Markus

SAP GRC latest patch in MoPZ

Hi Experts
We are planning to upgrade our ERP to EHP6 from EHP4 . While genreating the stackfile , in the select add step , i do not find the latest patch for SAP GRC component 5.3 (VIRSAHR and VIRSANH).
Select Add on :
I have assigned the required product version for GRC components . Could you please help me , how to get the latest version of the GRC components in the MoPZ .
Regards
Bala

Hi,
There have been enhancement packages release by SAP in ECC 6.0 and the latest released is EHP 6 for ECC 6.0
for the software component SAP_HR the release is 604 and the level is 42
for the software component EA_HR the release is 605 and the level is 19.
Your BASIS consultant would be of great help in this regard letting you know whats the latest.
I hope i addressed your query.
All the best to you
Regards
RR

Latest patch level 11g

Hi Guys,
We have just upgraded to 11g 11.2.0.1.0, I just wanted to find out if this is the latest patch level if not what's current?
Thanks.

NPD wrote:
Hi Guys,
We have just upgraded to 11g 11.2.0.1.0, I just wanted to find out if this is the latest patch level if not what's current?
Thanks.For which OS? for example i think last server patch is *10098816 11.2.0.2.0 PATCH SET FOR ORACLE DATABASE SERVER* for linux x86-64

An alert message observered while appling latest patch MLR 10

Hi Gurus,
While applying latest patch MLR10 we observed an alert message as below
"Creating log file "C:\oracle\midtier\.patch_storage\8404955\Apply_8404955_05-21-
2009_15-44-27.log"
Conflicting patches: 8204237,
Patch(es) 8204237, conflict with the patch currently being installed (8404955).
If you continue, patch(es) 8204237, will be rolled back and the
new patch (8404955) will be installed.
Note: If the patch currently being installed (8404955) is rolled back,
it is recommended that the fixes being rolled back here (8204237, ) are reinstal
led.
If a merge of the new patch (8404955) and the conflicting patch(es)
8204237, is required, contact Oracle Support Services and request
a Merged patch.
Do you want to STOP?
Please respond Y|N
Should we rollback the previous patch before applying MLR10 ? or can i continue with patch application ?
Thanks in advance,
Regards,
Cema

Please continue the MLR10 patch installation, this message would appear for the all patch installation (of course, patch number would be different though).

TS1453 after itunes upgraded to latest 11.0.2.26 apple tv (1st gen)does not show up anywhere in itunes

After Itunes upgraded to latest version 11.0.2.26 Apple TV (1st gen) does not show up anywhere in Itunes

I have the same problem. It was working fine up until the last update for iTunes 11.0.2
Here's the details:
I have an Apple TV - first Gen and up until a couple of weeks ago, was regularly playing sync'd iTunes music and videos through it on a daily basis.
I see other devicess showing up in the "Devices" list in the left panel of iTunes (such as iPad, iPhone, etc.)
AppleTV used to be there consistently, then disappeared upon update to 11.0.2
Apple TV also does not show up in the devices tab under the Preferences window.
I have tried multiple suggestions on the support forum but none have worked.
Apple TV is able to access the network, is on the same network as the iMac with iTunes library connected. Both are connected to network via ethernet cable (not wifi). Both are able to access the internet (apple tv plays movie prieviews and gets updates). Using the Terminal app, I am able to ping the apple TV's IP number from the iMac and get a successful return.
Both have latest software downloads.
I have tried cold-booting the apple TV, resetting the router, and verified in the router device list that both imac and appleTV are listed as active, un-blocked connections.
I don't intend to buy an Apple TV 2nd gen or later (since I bought this one and it's not working now due to software update, what guarantee that a later model won't generate the same problem later.
One last wrinkle, I have a 2 year old and a 5 year old who are jonesing hard for their "dance party" fix.
Have you ever wronged a two year old?
It is NOT pretty.
Help me Apple-wan-kenobi...I can't take the screaming!

How to tell what was the latest patch installed on VMware ESX Server 3i, 3.5.0, 207095

Hello Guys,
I have been running an old server that was installed as a test system on a DELL workstation - Optiplex GX620 (32 bit).
During the installation I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:
"return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE" to read:
"return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI" this made it worked and I have been using it for 3 years now. However, at this time I was hoping to update it with the latest patches and updates and I cannot figure out if I have ESXi or just ESX, nor what was my last update and what is required next.
I have used this command to get the following output:
# vmware -v
VMware ESX Server 3i 3.5.0 build-207095
... I believe the 3i indicates that I have an ESXi 3.5.0 but is build-207095 the same buid as ESXi 3.5.0 Update 5?
If not, how do I go about updating it? What is the KB # I should download?
I can manage it using vSphere Client 5.5 and I can SSH into it using Putty.
Note: When I run... "# esxupdate --bundle=ESXe350-201302401-I-SG.zip update" from within the folder where its at in the datastore, nothing happens... just a new line is scrolled.
Also...
# esxupdate query
<?xml version="1.0"?>
<query-response>
<installed-packages>
    <package ID="ESX-207095">
      <name>firmware</name>
      <version>3.5.0</version>
      <rel>207095</rel>
    </package>
    <package ID="ESX-CLIENT-204907">
      <name>viclient</name>
      <version>2.5.0</version>
      <rel>204907</rel>
    </package>
    <package ID="ESX-TOOLS-207095">
      <name>tools</name>
      <version>3.5.0</version>
      <rel>207095</rel>
    </package>
</installed-packages>
</query-response>
/vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/Patches/ESXe350-201302401-O-SG #
... is there any further update for this system? I believe so as the Heartbleed patch etc. was not around when I was installing this server back in 2010.

Hello Richardson Porto,
I wanted to tell you that I appreciate the help so far.
Also wanted to point out to you, that the KB indicated above is older than Update 5, which from your instructions is what I have installed. That KB is for U2.
Now, the document definitely has step by step instructions on installing, querying etc. But my problem is ... NOT ALL COMMANDS WORK FOR ME!
This is why I am here because all the instructions I have been reading does not work with my flavor of ESX 3.5.0, 207095... WHY? It has me stumped.
For example, here are some commands the doc asked me to do and they failed: (Note that I had to unzip the folder on my windows box and upload it to /tmp using vSphere Client)
/tmp # ls
ESX350-201302402-BG      ESX350-201302402-BG.zip vmhsdaemon-0
/tmp # unzip ESX350-201302402-BG.zip
-ash: unzip: not found                                                                                          -----------------------THIS COMMAND WAS NOT FOUND ?
/tmp # cd ESX350-201302402-BG
/tmp/ESX350-201302402-BG # esxupdate info
Invalid command info                                                                                          -----------------------THIS COMMAND WAS INVALID ?
/tmp/ESX350-201302402-BG # esxupdate update                                       -----------------------NOTHING HAPPENED HERE ?
/tmp/ESX350-201302402-BG # ls -lh
-rw-------    1 root     root       321.3k Dec 13 15:24 VMware-esx-scripts-3.5.0-988599.i386.rpm
-rw-------    1 root     root         1.6k Dec 13 15:24 contents.xml
-rw-------    1 root     root          701 Dec 13 15:24 contents.xml.sig
-rw-------    1 root     root         1.4k Dec 13 15:24 descriptor.xml
drwxr-xr-x    1 root     root          512 Dec 13 15:24 headers
/tmp/ESX350-201302402-BG #
NOTE: All these commands were run sequentially and I just copied and paste it from my SSH Client (PuTTy.exe)
Is there a toolkit I need to install to have these commands or what really am I missing here? Host is in Maintenance Mode and the 1 VM that's on it is off!
I am going to start a new discussion with this NEW ISSUE, since the Heading of this DISCUSSION has already been SOLVED! Thanks again!

I've just upgraded to latest version of Firefox 4 and my Mac is only OSX.10.4.11 and it won't open. How do I downgrade and get old Firefox back. Don't want to lose all my bookmarks. Why was I able to install in the first place. Very frustrated!!

've just upgraded to latest version of Firefox 4 and my Mac is only OSX.10.4.11 and now it won't open. How do I downgrade and get old Firefox back. Don't want to lose all my bookmarks. Why was I able to install in the first place. Very frustrated!!

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
You can trash Firefox 4.0 then re-install Firefox 3.6, it will use your existing bookmarks, passwords etc
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Just upgraded to latest iTunes for Windows. Rebooted the PC as required. When I bring up iTunes I get a pop message saying "An unknown error occured (-42110)". What does that mean?

Just upgraded to latest iTunes for Windows. Rebooted the PC as required after the update. When I start iTunes I get a popup message saying "An unknown error occured (-42110)."
What does it mean?
How do I fix it?
Thanks!

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden

Is there a workaround for Facetime Apr 16th issue than upgrading to latest IOs ??

Hi,
I have IPad2 and I am facing the Facetime issue due to certificate expiry on Apr 16 as reported by Apple.
I dont want to upgrade to latest IOS because I think it would slow down the performance and ruin a good working IPad just to resolve this issue.
Is Apple going to provide some other alternative and/or fix the issue rather than forcing people to upgrade?

Folks choices are to either update or move to a different app such as skype or some other video chat program.

Just upgraded to latest iOS and my iPad does not come back up. It displays a line to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else.

Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Upgrading to Latest Patch

Similar Messages

Maybe you are looking for