Upgrading to Lookout 6.7.1 from version 5.1 on new computer

Hi
We recently upgraded to Lookout 6.7.1 from version 5.1 (build 8). We copied the
database, Source Files, Process Files from the old computer to the new
computer. We also attached the database in NI Max. We then updated the files
when we opened them in the new version 6.7.1. We now are missing data and we
are experiencing issues with the following:
1. No Trends are trending
2. We have a screen named Instruments Settings but the numeric values are not
displaying
3. We have tried changing the numeric values for the Instruments Settings but
they will not write to the database
4. We have tried the Revise Potentionmeter but it is not writing to the Remote
URL
5. The Data Member Configuration is not editable
Below are screen shots:
Thank you for any assistance you can provide.

HI Bob
The database conversion did complete successfully. The alarms are showing because the datapoints are not registering correctly and such the min and max are setting off the alarms. Some devices are working while others are not. Seems to be about half of the devices are working. I have little Lookout experience. I have enough knowledge to put up a Lookout PC and move the data/files. The last move went okay but this one has been difficult at best. Luckily I still have the "old" setup working and can fall back when the attempts to get the new one does not work successfully.I have found the proper way to edit the data points individually but this would be very tedious and prone to errors. I would like to think there is some connetion that has not converted to the new version and I need to find and fix that connection, but again I don't have the required knowledge for that.
Your thoughts?
Thank you for your reply.
Lynn

Similar Messages

Problem after upgrade a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2

I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
"PI-upgrade-bundle-1.2.0.103.tar.gz".
after the upgade I have got the Message "Upgrade Successful".
Now when I start the NCS i get the following error message
egghead/admin# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
In the launchout.log are this messages:
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
truststore used is /opt/CSCOlumos/conf/truststore
truststore used is /opt/CSCOlumos/conf/truststore
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting Remoting Service: Reporting Server
Checking for running servers.
00:00 Check complete. No servers running.
Starting Server ...
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
have anyone an idea whats wrong?
thank you for your help
Kurt

i have the same problem
NCS/admin# ncs status
Health Monitor Server is starting.
Reporting Server is Starting
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
status
I try it
To get it back up and running do the following from the CLI.
1. Stop the NCS
2. Run 'ncs db reinitdb'
3. Start the NCS
but the status is the same

How do I upgrade to ios 5 or higher from version 4.2.1?

I have the first version of the IPad which is 4.2.1. How do I upgrade to ios 5 or higher from version 4.2.1? On my Settings/General, there is no Software Update section.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

TRANSFER MY MUSIC LIBRARY FROM MY IPOD TO MY NEW COMPUTER

MY COMPUTER WITH MY ITUNES LIBRARY CRASHED. I HAVE ABOUT 400 SONGS ON MY IPOD AND I WANT TO TRANSFER THE MUSIC FROM MY IPOD ONTO MY NEW COMPUTER. I CANNOT ACCESS THE LIBRARY ON THE OLD COMPUTER. PLEASE HELP

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.

Can I bring the music from my ipod to my new computer?

My old computer crashed and I lost everything. When I plug my ipod in to my new computer it ask if I want to replace the music on my ipod with the music on my new computer (right now there is no music on here). Is there a way I can bring my music from my ipod to my new computer? Thanks

You can't sync your music back from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
PodPlus Windows Only
There is also a manual method of accessing the iPod's hard drive on Windows and retrieving your songs posted in this thread: MacMuse - iPod to iTunes
If you are using the iPod in manual update mode, your iPod is safe from being accidentally erased when you connect to an empty iTunes after reinstalling your operating system. However if your iPod is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No*. Pressing "Yes" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual.
You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box: Managing Your Songs Manually
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

Home computer crashed. How can I move stuff from iPod Touch to a new computer?

Our home computer crashed. How can I move stuff from iPod touch to a new computer?

- Transfer iTunes purchased by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other stuff via the third-party programs discusses in this prevous discussion:
Best iPod to PC

I have transferd music from my ipod to my new computer and some of the files are not coming over, i have noticed the m4a files come across but the mp3 do not, any ideas how i can resolve this? thanks

I have just bought a new computer and i am transfering my music from my ipod onto my new computer, I have put the files from the music option from my ipod onto my computer. alot of the songs have come across, however there is alot of songs that havent. I have noticed that the m4a files come across but the mp3 does not. the new computer has windows 8 on it, which is very new to me. when i try and play the mp3 files, it will open them up in a different programme and will not open in itunes. does anyone know what i can do?!?!!?!?!
THANKS

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
BTW this is the iPod touch forum

How do I transfer music from an iPod to a new computer, with an existing iTunes account that is not mine, or to an iPad??

My computer crashed and I lost my iTunes library and music. The music is however on my iPod 5th Generation. How do I move my music to my husbands computer, where he has his own music....or how do I transfer or add my music from my iPod to my iPad?
I also lost all my gift card money on my iTunes account. Can I add my iTunes account to a computer that already has an iTunes account?

I have read this, but it does not help. My crashed computer had my iTunes library with MY iTunes ID. The new computer and iPad that i want to transfer my music to, that is on my iPod, is under a different iTunes account. Can I still transfer my music from my iPod to a new computer that has a different ID?

How can I move music from my iPod to my new computer if my computer can't SEE the music from the source?!?

I have read through lots of suggestions for moving my music from my iPod to my new computer...but can not seem to overcome a very difficult hurdle:
When I connect my very old iPod to my computer and click on the icon to open it, only 3 folders come up: Calendars, Contacts and Notes. I cannot "backup" anything useful here!
When I open iTunes, the program can see my iPod, and lists the complete library...but I cannot KEEP it in my computer! WHY?!?
When I go to iTunes > File > Library, I do not get a "backup" option to use to backup my iPod music, either.
HELP, please. I have spent hours fiddling around trying to figure out how to do this, and am getting crankier and crankier.
Thanks in advance...
Kristin

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Ask your question.how can I transfer music from my ipad to a new computer and new ipad?

How can I transfer music from my iPad to a new computer and to my new iPad2?

See this support article:
http://support.apple.com/kb/HT1848
Regards.

Can i move everything from my iphone to a new computer without losing my messages (iphone 3gs)

Hi,
Em i am wondering if there is any possible way to move everything from my phone to a new computer because i lost my old computer and dont want to lose everything. If not is there even any way i can just keep my messages. If i have 2 lose my music thats that but i really dont want to lose my messages. I cant lose them really :/... If anyone no's what i can do it would be really really helpful... thank you ..

https://discussions.apple.com/docs/DOC-3141

How can I transfet itunes from my touch to a new computer without access to the old computer

How can I transfer my itunes music and pictures from my touch to a new computer without having access to the old one, which died?

check out this post by Zevoneer.

Is there a way to transfer music from my iPhone4 to a new computer?

My old computer's hard drive crashed so theres no way i can go back and get all those songs:/
So i was wondering if anyone knows a way to transfer music from my iPhone4 to a new computer without the need of my old computer.

Use a utility such as Phone to Mac - Pod to Mac | Macroplant.com or Phone to PC | macroplant.com.

How can i sync music from my phone onto my new computer without losing it all? my old computer's hard drive crashed so it is unusable.

how can i sync music from my phone onto my new computer without losing it all? my old computer's hard drive crashed so it is unusable.

If you do not have a back up of the crashed hard drive you can download an app to copy from the iPhone to iTunes on the new hard drive.
I have used Pod2Mac. There is also Pod2PC.
There are numerous choices, some free, some payed. Do a Google search.

My computer crashed how do I get my music from my iPod on my new computer?

My computer crashed how do I get my music from my iPod on my new computer?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Upgrading to Lookout 6.7.1 from version 5.1 on new computer

Similar Messages

Maybe you are looking for