Upgrading to LR 3.2 from 2.6 - Should I use the LR 3 box?

As I intend to upgrade to Lightroom 3.2 from 2.6, I wonder if I should use the upgrade box or donload a trial version and insert the key to be found in that box.
There was a thread lelated to migration from LR 1.4 to 2.2 ( http://forums.adobe.com/message/1394503#1394503 ) that strongly suggested passing over 2.0
What is best?

As I intend to upgrade to Lightroom 3.2 from 2.6, I wonder if I should use the upgrade box or donload a trial version and insert the key to be found in that box.
It doesn't matter. The results are the same. Lightroom 3.2 is Lightroom 3.2 whether you download it or buy the box.
There was a thread lelated to migration from LR 1.4 to 2.2 ( http://forums.adobe.com/message/1394503#1394503 ) that strongly suggested passing over 2.0
What is best?
I agree ... skip 2.0, although this seems irrelevant to your title and first paragraph.

Similar Messages

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

Since upgrading to mavericks my applications crash when i try to use the print dialogue

since upgrading to mavericks my applications crash when i try to use the print dialogue

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

[svn] 4267: Change path to Assets.swf in eclipse . project file from full hardcoded path to use the FLEX_SDK variable as the base path .

Revision: 4267
Author: [email protected]
Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
Log Message:
Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
Modified Paths:
blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

Revision: 4267
Author: [email protected]
Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
Log Message:
Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
Modified Paths:
blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

I have several times tried to stop following a thread in the PDF's forum about security issues and i still keep getting flooded with emails from this thread. I used the action within the thread that says stop following but appears to have no effect I stil

I have several times tried to stop following a thread in the PDF's forum about security issues and i still keep getting flooded with emails from this thread. I used the action within the thread that says stop following but appears to have no effect I still keep getting from 5 to 20 emails daily. Please help!!!!!!!

This may be helpful: How do I disable email notifications?

Now that I upgraded to Maverick on my Mac air, I can not use the power button to shut down the computer anymore. any suggestions?

Now that I upgraded to Maverick on my Mac air, I can not use the power button to shut down the computer anymore. I now have to go to the apple icon in the upper left corner. Any short cuts instead of going to the apple in the top left corner and hitting shut down. Doing that all the time, I feel like I am back at work using a "Windows" computer.

This a is tricky one, but you can still do it. Instead of pressing the power button, hold it down for a few seconds and then you'll see the shut down options dialog pop up.
I guess they were trying to prevent accidental touching of that button. They did something similar with the Eject button a few versions ago, where you have to hold down Eject instead of just tapping it so that you don't pop out a CD by mistake.

I plan to buy an iphone 6 from New York. I am from India and shall be using the phone in India. Is it possible to get an unlocked iphone from the store? If yes, how much would it cost?

I plan to buy an iphone 6 from New York. I am from India and shall be using the phone in India. Is it possible to get an unlocked iphone from the store? If yes, how much would it cost?

It is going to be months before any unlocked iPhone 6s will be available.
Also be aware that the iPhone purchased in the USA will only have warranty service in the USA. Any warranty service will require you to bring it back to USA.

I have an Ipad first generation with IOS 5.1.1. and I have just got a new ipad mini. Should I use the back up of the old Ipad from Itunes copy to configure the new one, or it is better to configure the new one from scratch?

I have an Ipad first generation with IOS 5.1.1. and I have just got a new ipad mini. Should I use the back up copy of the old Ipad from Itunes to configure the new one, or it is better to configure the new one from scratch?

Contrary to the opinion above, I see no reason whatsoever why you can't set up the new iPad from the backup of the old one. Obviously you will have app updates to make and complete and that sort of thing, but if you want to retain all of your app data and device settings (some of which will change because of the updated iOS), I would certainly restore from the backup first.
If you find that to be problematic, you can always start all over again.

I don't want to upgrade to Firefox 5 because it won't let me use the Google toolbar. How can I stop the constant notifications?

I have Firefox 4.01, retrieved (thankfully) after installing Firefox 5. I noticed upon installation that my Google Toolbar was gone and the notification said Google Toolbar was not compatible with the new version of Firefox. After retrieving the copy of 4.01 from oldversions.com, I started getting bombarded with requests to upgrade to Firefox 5.0. This goes on all day, all night...it never stops. Is there a place I can ask you guys to please stop? I'll upgrade when you make this version compatible with Google's Toolbar.

The replies don't address the question: "I started getting bombarded with requests to upgrade to Firefox 5.0. This goes on all day, all night...it never stops. Is there a place I can ask you guys to please stop?"
I have the same problem: I also don't want to upgrade to 5.0 (4.0 messed me up enough and I finally got that straightened out). How do I stop those annoying requests? It should have a "No" option.
Please email replies to [email protected] Thanks.

Open Adobe Print Form from ALV Int. Rprt using the XSTRING already present

Hello Friends,
I have a typicall issue that how to open a Adobe Print Form when a user double clicks in the ALV Report. Here when the user double clicks in the ALV Interactive Report using the unique ID I am getting the Adobe Form from a FTP location in the Form of XSTRING, now using the ABAP ADOBE PRINT FORM not using WebDynpro Application, I need to process this XSTRING and show up the Adobe Print Form.
OR
Is there a way to send the XSTRING to the Output Device or Printer to Display the PDF Form.
Friends please help me in solving this issue.
Thanks and Regards
Pradeep Goli
Edited by: Pradeep Goli on Mar 19, 2009 1:49 PM
Edited by: Pradeep Goli on Mar 19, 2009 2:51 PM

Hi Pradeep Goli,
it is possible to show PDF in SAP GUI.
Michal
REPORT ZTEST_DISPLAY_PDF.
* You must create dynpro 500 with custom control named HTML.
* In this custom control will be displayed PDF.
DATA: g_pdf              TYPE xstring,
      pdf_my_container   TYPE REF TO cl_gui_custom_container,
      pdf_html_control   TYPE REF TO cl_gui_html_viewer.
START-OF-SELECTION.
PERFORM create_and_display.
FORM create_and_display.
*** Your code fo filling g_pdf
CALL SCREEN '500'.
ENDFORM.
* PDF preview in HTML control
module html_control output.
perform pbo_html_control.
endmodule.
module html_control input.
perform pai_html_control.
endmodule.
* PAI
FORM pai_html_control.
SET SCREEN '0'.
ENDFORM.
* Showing of PDF
FORM pbo_html_control.
DATA: l_pdf_alignment TYPE i,
        l_count         TYPE i,
        l_noprint       TYPE fpboolean,
        l_noarc         TYPE fpboolean,
        l_noprintarc    TYPE fpboolean.
* CLEAR: fcode.
SET PF-STATUS 'VIEW_PDF'.
* container
IF pdf_my_container IS INITIAL.
    CREATE OBJECT pdf_my_container
      EXPORTING
        container_name = 'HTML'
      EXCEPTIONS
        OTHERS         = 1.
    IF sy-subrc <> 0.
      MESSAGE e150(FPRUNX).
      RETURN.
    ENDIF.
ENDIF.
* html control
IF pdf_html_control IS INITIAL.
    CREATE OBJECT pdf_html_control
      EXPORTING
        parent = pdf_my_container
      EXCEPTIONS
        OTHERS = 1.
    IF sy-subrc <> 0.
      MESSAGE e150(FPRUNX).
      RETURN.
    ENDIF.
*   alignment
    l_pdf_alignment = pdf_html_control->align_at_left +
                    pdf_html_control->align_at_right +
                    pdf_html_control->align_at_top   +
                    pdf_html_control->align_at_bottom.
    CALL METHOD pdf_html_control->set_alignment
      EXPORTING
        alignment = l_pdf_alignment
      EXCEPTIONS
        OTHERS    = 1.
    IF sy-subrc <> 0.
      MESSAGE e150(FPRUNX).
      RETURN.
    ENDIF.
ENDIF.
PERFORM pdf_show USING g_pdf.
ENDFORM.
FORM pdf_show USING p_pdf_data TYPE xstring.
STATICS: ls_url           TYPE i.
TYPES: lt_pdf_table(1000) TYPE x.
DATA: l_myurl(80)        TYPE c,
         l_url(80)          TYPE c,
         l_pdf_data         TYPE STANDARD TABLE OF lt_pdf_table,
         l_pdf_size         TYPE i,
         l_pdf_line         TYPE lt_pdf_table,
         l_offset           TYPE i,
         l_len              TYPE i.
l_pdf_size = XSTRLEN( p_pdf_data ).
l_len = l_pdf_size.
WHILE l_len >= 1000.
    l_pdf_line = p_pdf_data+l_offset(1000).
    APPEND l_pdf_line TO l_pdf_data.
    ADD 1000 TO l_offset.
    SUBTRACT 1000 FROM l_len.
ENDWHILE.
IF l_len > 0.
    l_pdf_line = p_pdf_data+l_offset(l_len).
    APPEND l_pdf_line TO l_pdf_data.
ENDIF.
ADD 1 TO ls_url.
l_myurl(8) = ls_url.
CONCATENATE l_myurl '.pdf' INTO l_myurl.
SHIFT l_myurl LEFT DELETING LEADING space.
CALL METHOD pdf_html_control->load_data
    EXPORTING
      url          = l_myurl
      size         = l_pdf_size
      type         = 'application'                          "#EC NOTEXT
      subtype      = 'pdf'                                  "#EC NOTEXT
    IMPORTING
      assigned_url = l_url
    CHANGING
      data_table   = l_pdf_data
    EXCEPTIONS
      OTHERS       = 1.
IF sy-subrc <> 0.
    MESSAGE e152(FPRUNX).
    RETURN.
ENDIF.
* show data
CALL METHOD pdf_html_control->show_data
    EXPORTING
      url    = l_url
    EXCEPTIONS
      OTHERS = 1.
IF sy-subrc <> 0.
    MESSAGE e152(FPRUNX).
    RETURN.
ENDIF.
ENDFORM.

Transfer palm data from PC to Mac without using the M100 - only exporting the data and importing?

I had an old Palm M100 that I haven't used in a while but I love the palm desktop app - my PC currently runs 4.1.4
I have a mac powerbook and I loaded 4.2.1
When I export my calendar and address book data in the .aba and .dba format from my PC - the Mac palm desktop app doesn't seem to recognize those file formats.
Are those not standard formats between the two platforms? It also looks like the Mac desktop app doesn't even recognize importing data from another Palm format? It just shows the other program formats.
Also, when importing as CSV or tab-delimeted those are extremely messed up also.
Any "easy" way to get the data off of my PC and onto my Mac without using the Palm M100 itself?
Thanks,
Dave
Post relates to: Palm m100

The suggestion is not accurate, at least with respect to calendar information. I'm in nearly the same situation, and just tried it. (Saving .dba file out of Windows Palm Desktop 4.1.0, importing into Mac Palm Desktop 4.2.1revD.)
First, the Mac program will not recognize the .dba as an importable format if one selects All Readable Documents.
Second, if one selects All Documents instead, you get the following error message:
The file could not be imported.
In order to import data from Windows Palm Desktop software, export the file in one of these formats: comma (.csv) or tab (.tab) delimited, vCard, or vCal.
The problem with this is that Windows Palm Desktop 4.1.0 offers only two options for exporting Date Book information:
1) the whole datebook as a .dba file.
2) individual calendar items as a vCal.
So far as I can see, there's no way to Select All so as to export all as a vCal, and no pre-set option to do so.
Post relates to: Palm m125
Post relates to: Palm m125

Tip: How to play a playlist one song at a time from iTunes on a computer using the checkbox property

I would like to share a tip about how to play a playlist one song at a time from iTunes on a computer. The tip I am sharing is simple, but I was not able to find it in the iTunes Help. After searching on the internet I found the idea for this solution in a discussion in which this was presented as a frustrating problem rather than a desired behavior. This tip relies on the checkbox for each song in iTunes. For a song in a playlist to play automatically, the checkbox must be checked. To keep a song from playing in a playlist, simply uncheck it. Therefore, to keep all songs from playing automatically in a playlist, simply uncheck them all. Now you have a list of desired songs in a desired order but none of them will play automatically. You can play each one when you want to play it without having to search for the next song and without having to be at the computer to stop the playing after each song.
Step by step:
1. Create the playlist.
2. Uncheck all of the check boxes in the playlist (In iTunes for Windows, ctrl click one of the check marks to uncheck all of the checkboxes at once)
3. Now double click (or select and press spacebar) a song to play it. It will stop when finished because there is no other song checked to be played next.
4. If you want to change back to normal sequential play, ctrl click one of the check marks again to change all of the checkboxes back to the checked status.
Based on some discussions I found while looking for a solution (including at least one in which the questioner got bashed about why anybody would ever want to do such a thing and in which the proposed solutions were things like creating one song playlists or simply press stop after each song), some may not understand why this would ever be desired. Here's why I wanted to do it:
I was responsible for playing a series of songs at a dance. I needed to stop after each song to have a transition time to allow me to introduce the next song and to give new dancers time to get onto the floor and other dancers an opportunity to leave the floor. Furthermore, I was also dancing and didn't want to have to spend time searching for the next song (which is why I wanted to create a playlist in advance with just the songs I wanted to play in the order I wanted to play them) and I wanted each song to stop after playing since I was not at the computer to press stop.
I hope this will help others who have a similar need.

Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

Error when moving a mailbox from one database to another using the EMS

Error "The database is excluded from provisioning.Please Select a different target database for the move"
Above is the Error i get when moving a mailbox to another database on the same Exchange mailbox Server 2013 using the EMS

Hi MikeVATX,
Using the EMS I ran the Command
below,
Get-MailboxDatabase DBName | select name,*provision*
The result displayed that the Parameter IsExcludedFromProvisioning was set to True which i had to set to false by running the command below as per your guide.
Get-MailboxDatabase -Identity DBName | Set-MailboxDatabase -IsExcludedFromProvisioning
$ False
Then i was able to move the mailboxes.
It now works fine.Thanks for that solution.
Thanks & Regards,
Ronald

Itunes copied my files from my portable harddrive to my new computer harddrive on a new computer. I didn't want that, but didn't realize I did it. How do I fix this so I can delete the songs from my computer harddrive and use the songs from the portable

On my new computer I installed Itunes. I wanted Itunes to use my portable harddrive for music, but instead it copied my library to the hard drive of my computer, filling it almost full. I didn't realize this happened until I synced my iphone to Itunes. How do I fix this? I want to delete the library from my hard drive of my computer, and use the library from my portable hard drive.

Hi Robin,
Welcome to Apple Support Communities.
You may find this article helpful with using a media library on an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Have a good day,
Jeremy

Upgrading to LR 3.2 from 2.6 - Should I use the LR 3 box?

Similar Messages

Maybe you are looking for