Upgrading to mountain lion and install has stop

I have started the upgrade to mountain lion and it has downloaded and started to install
It had a message that the machine would restarted automatically during the install
When it tried to do that it has now stopped at at blank white display
What should I do?

Hi, were you upgrading from 10.6 or 10.7?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Similar Messages

  • I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

  • I upgraded to Mountain Lion and now I can't use any of my software!

    What a disaster and huge mistake.  Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs.  I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work!  I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me.  I never used Time Machine.  Is there any way on earth I can revert back to my old operating software???  Please help.  And if you haven't upgraded yet and are thinking about it.  BEWARE - and don't do it.  I've been reading that Mountain Lion isn't working with Microsoft applications either.  Omy...I haven't even checked that. 
    and of course no one at Apple support can or will help me

    lunaulu wrote:
    It's not my Microsoft that I use much or am worried about.  I can't run AutoCAD.  and I can't update AutoCAD either.  When I try to mount an update just to get it working, it says it can't run the DMG file.  Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads.  ***?  and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***? 
    So basically I can't use ANY of the programs I ran before.  And yes I have googled desperately all day.  Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did.  And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it!  It's a complete disaster and I don't have the money or time to purchase and or reinstall everything.  I am just screwed. 
    No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
    And please .... Start Backing Things Up, you could lose it all without one, work included.

  • Just upgraded to mountain lion and my HP Laserjet p1102W won't connect

    Just upgraded to mountain lion and my HP Laserjet p1102W to print (worked fine via USB with Snow Leopard; I never had set it up wirelessly, though had wanted to do so.)  HP site said if printer worked with Snow Leopard nothing would need to be done; update of drivers would be automatic within Mountain Lion upgrade.  No such luck.  My Macbook Pro and HP Printer are not talking to each other.  HELP, please!
    I have a Macbook pro. 
    When I tried to print, I was told to get new drivers from HP.  HP site says what I wrote above, that I need do nothing if printer worked with Snow Leapord.  Also read that a new HP Laserjet would need to be connected only via Airprint.  So, I have deleted the printer from the print queue, thinking that might help, but I can't find how to install it via Airprint??  After deleting the printer and having no luck with connecting wirelessly, I tried plugging in USB from printer to MacBook pro, too, thinking maybe that would help, but there is no recognition at all.
    What am I missing???
    Thanks!
    Ani

    Csound1 wrote:
    John Blanchard1 wrote:
    Are you not able to select AirPrint from the menu that lets you select the PPD?
    Do you have the latest firmware?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4110396#N222
    Airprint is for IOS devices and thus has no relevance to this issue.
    Connect the printer to your Wireless Network and use Bonjour to detect nd connect it.
    That's wrong. AirPrint is not just for iOS devices. Since HP doesn't provide drivers for this printer, they say to use AirPrint:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=219&product=4110396&sw_lang=

  • I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

    I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • Selling macbook Pro 2011. It came with Lion, I upgraded to mountain Lion and Mavericks. Can license be transfer to new owner? how?

    selling macbook Pro 2011. It came with Lion, I upgraded to mountain Lion and Mavericks. Can license be transfer to new owner? how?

    Good question now that Mavericks is free to all.
    It used to be - and is probably still the case - that to comply with the license you should erase and re-install the OS that came pre-installed on the Mac when new. If there were restore disks they needed to be passed on with the Mac.
    I'm happy to be corrected on this by someone who's more au fait with the legalese, but an upgraded OS is tied to an AppleID whereas the original OS is tied to the computer, not an AppleID.
    My guess is, that if you launched the Recovery HD, erased the drive using Disk Utility and re-installed the OS, Lion would be installed.
    Be interesting to see what others say.

  • I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

    I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

    I had this and fixed it.
    I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
    After lots of hunting, I found the Signature Folder. It's in:
    Yourusername>Library>Mail>V2>MailData>Signatures
    Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
    Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
    Since this was literally a clone of my previous setup to a new machine, here's what I did:
    1. Quit Mail
    2. In Problem machine, go to
    Yourusername>Library>Mail>V2>MailData>Signatures
    3. Move the Signatures folder someplace safe, but out of the MailData folder
    4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
    5. Start Mail on the problem machine
    This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
    Hope this helps

  • I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

    I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

    Download and install the MX310 scanner driver and MP Navigator from Canon.
    http://support-au.canon.com.au/P/search?model=PIXMA+MX310&menu=download&filter=0 &tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8

  • I upgraded to Mountain Lion and now my computer keeps freezing.  How to fix?

    I upgraded to Mountain Lion and nowmy computer keeps freezing.  How do I fix this?

    I know you have 10.8.4. I'm asking you to download and install a Combo updater. This is not the same updater used through the App Store when you simply upgraded from 10.8.3. And, before you do that I suggest you do this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • I did have the ability to "save" in PAGES. I upgraded to "Mountain Lion", and now I can not "Save". Help please!

    I used to be able to "Save" my material in PAGES. I upgraded to "Mountain Lion" and now when I go to "Save", it says "permission denied". How can I correct this?
    <E-mail Edited by Host>

    Several users have had this problem in Mountain Lion. The system has decided you don't have read/write permissions. Have you done any updates to your system lately? Using Disk Utility to repair permissions after any upgrade or update, especially to the system, is a good practice. So first, I would repair permissions & then if you still have the problem, locate the file in Finder & go to File > Get Info & look in the Sharing & Permissions section. You should be the only one with read/write permissions but something has happened. Click on the words under "priveledge" next to your name & change it to read & write. You will probably have to enter your admin password.

  • I upgraded to mountain lion and now have nothing in itunes, why

    i upgraded to mountain lion and now have nothing in itunes, why

    About TM "Backup Drive is Full"
    Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
    So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
    Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
    Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

  • I just upgraded to Mountain Lion and when I turned around I noticed my Stickies were gone

    I just upgraded to Mountain Lion and when I turned around I noticed my Stickies with all my secret computer codes and passwords etc. were gone.  I think they are attached to the application and were replaced with the upgrade with a new version...n'es pas?

    Came here looking for a solution to this same problem and presume others will. 
    I found it somewhere else but just want to share the answer!
    go to the SPOTLIGHT search and type in Stickies.
    The app is still on your mac, it just doesn't show in the dock or the Launchpad.
    It opened and all my lovely notes appeared as they were in my Lion install.
    have a nice day!
    EMJ

  • I recently upgraded to mountain lion and now cannot connect to my Brother QL-570 Label Maker

    I recently upgraded to Mountain Lion and now cannot print out on my Brother QL-570 printer. I get as far as typing in the label name and then the labeller or computer disconnect. I have tried downloading drivers from Brother but they can't do that as only Apple can do that but there is nothing in Apple to do that. I also reloaded the program off the set up disc. . Any ideas?

    yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver.  If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package.  and then you can install it.
    ** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
    well, enough for tonight
    if this didn't help you, then ask me again tomorrow
    John b

  • I just upgraded to mountain lion and I can't figure out how to use messages...  it wants me to use AIM or something like it, but I can't change the user...

    I just upgraded to mountain lion and I can't figure out how to use messages...  it wants me to use AIM or something like it, but I can't change the user... How do I do this??

    See this Thread

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

Maybe you are looking for