Upgrading to new Hard Drives on XW4400 Workstation

Trying to upgrade to higher capacity hard drives (Seagate/300Gb & 500Gb) on my XW4400 workstation is NO-GO. Took original drives out, put in new drives - System (Windows7/64) cannot find my new drives when install is attempted. F10 Setup (I believe) is set for RAID-0 config, and I don't know how to set it back to seeing just 2 regular hard drives. HELP!?!

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Time Machine Error - After Upgrade To New Hard Drive

I just upgraded from my previous 500 GB hard drive to a new 500 GB hard drive in my late 2008 unibody Macbook Pro. I have an external 500 GB hard drive that I use for my Time Machine Backups also. I used CCC to clone my original hard drive to the new internal one and everything went just fine.
I also deleted all my Time Machine backups from the external so I could just create a new one after the upgrade and cleared all the trash bins too. But now when I try and create the Time Machine backup, it gives an error that 592 GB is needed to create the initial backup, even though it is only from a 500 GB drive (of which only 440 GB) is being used. I wouldn't think this would be a possible error. Can anyone offer some help, or did I just shoot myself in the foot? Thanks.

Agreeing with Kappy, TM needs 2-3 times the size of the data it's backing-up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
The reason this backup is failing is, TM adds 20% to the estimated size of the backup when requesting space on the backup disk, for temporary workspace and in case the estimate is low. So your 440 GB will require, temporarily, 528 GB.
Short term, you can wrangle a backup by excluding something large, at least 90 GB, (so TM will only request, say, 410 GB + 82 GB for the first backup). Then remove the exclusion and run another, and it should fit.
Longer term, you really do need a larger drive.

Upgraded from Lightroom Beta which was on a hard drive which has failed now want to install my upgrade unto new hard drive.

When lightroom first arrived on the scene, it was in the beta stage and had unlimited free access. I liked it and when Lightroom 2 came out I upgraded from Adobe. That was on my old computer whose hard drive has failed. So now wish to install my Lightroom 2 on my new computer. It asks for the Original serial # which I do not have access to. Since my original version was a beta how can I get a serial # for a version 1.0 ?

When lightroom first arrived on the scene, it was in the beta stage and had unlimited free access. I liked it and when Lightroom 2 came out I upgraded from Adobe. That was on my old computer whose hard drive has failed. So now wish to install my Lightroom 2 on my new computer. It asks for the Original serial # which I do not have access to. Since my original version was a beta how can I get a serial # for a version 1.0 ?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11

My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
          1. Open your new iPhoto Library
          2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
          3. Click on "Show Package Contents"
          4. Go to the folder called "Originals" or "Master"
          5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
          6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!

I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
          GOOD LUCK!!!

How do I reinstall Lion if I get a new hard drive? My mac came with Leopard and I cannot find my upgrade disk for Snow Leopard

My MacBook Pro originally came with Leopard. I have the OS and Applications disks for Leopard but I cannot find my upgrade disk for Snow Leopard. I would like to perform a clean install of Lion on the new hard drive and restore some data from my Time Machine backup. I am not looking to restore the current image to my new hard drive. I have not yet removed the exisiting hard drive nor have I wiped my data.

The only way to do that is to buy a New SL Retail DVD. Or you could buy the Lion Install USB thumb drive from Apple for $69.
You must have SL installed to then install Lion or have a thumb drive with the Lion installer.
You could also create a Lion USB Recovery thumb drive using Lion Disk Assistant. But you need to have Lion already installed and the Lion RecoveryHD Partition on your drive to make the Recovery thumb drive.
Lion Recovery Disk Assistant

What is the best order to upgrade to Lion after putting in a brand new hard drive in my MacBook Pro? Restore first? or install Lion First?

I have a 2008 macbook pro with brand new 500GB hard drive and 6GB new RAM. My old hard drive is backed up on external drive, via time machine. When the shop put in the new hard drive (there was nothing wrong with old one, it was just stuffed to the brim), they loaded snow leopard from a disk, but I haven't put anything from the old drive back on yet....I haven't even configured my mail and am just reading mail from ipad and phone these days.
Question: Should I install Lion before I restore all the old backed-up stuff, or is it important to have anything, ( like maybe preferences) already on the computer when I download Lion. I want to be selective when restoring from time machine, because my old hard drive had a lot of ancient software and junk on it that had migrated from every computer we've ever owned, and that is many, many.
So, I'm just stuck on the best way to proceed. Also, should I install the latest update for 10.6.8 before I download Lion? I see today that some new updates have become available; java, security, safari, and apple software installer.
Thanks
G.T.

Gaye Thomas wrote:
But I just read your next post, and it sounds like you think I should do the back-up first, or am I missing something. I think you are now recommending that:
1. First I should install Snow Leopard,
2. do the combo update of 10.6.8
3. THEN USE BACKUP to restore what I want to carry over to new drive.
4. Then upgrade to Lion.
I would restore SL and do the Combo 10.6.8 update. Then use your backup to load back in what you want. Then do the upgrade to Lion.
So what made you change your mind?
And, just to say again, the hard drive is completely new. The shop installed 10.6.8 from the installation CD, and I haven't even configured email. I'm only using safari. I just now downloaded 4 updates that software updater recommended. It now tells me it is up to date. Is there any reason to do a 10.6.8 combo updater?
Are you recommending to do the back up BEFORE I install Lion, so that there are some preferences and information about old passwords and certain information that Lion will want to know about? Will it make my life easier to back up BEFORE I install Lion?
What changed my mind was your second post. You don't want to carry over everything to the new drive and the install of Lion. You only want selective things and of course your personal files.
For that I "feel" it best to install SL, Update SL to the most current version, Then selectively restore the parts you want and then install Lion on top of that newest install of SL with the selectively restored parts on the new Hard drive.
That should give you as clean an upgrade as you can get.
Of course you could go a completely different route. Make the Lion install USB, Save all your program Install files you want to be installed in Lion along with your personal files. Then Wipe the drive and install Lion clean. Then RE-Install your programs and copy over your personal files.
That is what I would do as I do not like upgrading to a new OS over the top of an older one. I have never found that to be as clean and it always seems to carry over stuff from the older OS to the new one. But that is me.

Why am I not able to install snow leopard on a new hard drive for my macbook pro, which at one point was upgraded to Lion?

I've just had my hard drive go caput and after purchasing a new one was inclined to install snow leopard but received an error message when attempting to do so.
I did not create a back up or restore file before I decided to upgrade from snow leopard.
I'm wondering why am I not able to simply install snow leopard on a brand new hard drive. What would clue it into me having had ran lion before and why can't I simply delete that kernel or said file. It makes completely no sense to me. I come from a pc world where if I choose to format a hard drive, I can do a clean install of whatever OS I choose. After all I only paid for my laptop as should be able to do with it what I wish.
Any suggestions or insight would be greatly appreciated

1. Was Lion on the machine and trying to downgrade?
2. If so this might be an issue. Newer machines are done for current OSX.
3. If you have Lion on your machine try to install Snow Leopard on another partition or portable HD
4. After you format and install SL on the other partition or drive Try to boot from this machine retarting and holding the Option key at boot up.
5. See if that work.
This is a trial and error way but Mountain Lion is right around the corner and Snow Leopard is 2+ yrs old.
Brian

I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive. How can I change the settings so it automatically goes to my new hard drive?

I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive. How can I change the settings so it automatically goes to my new hard drive?

lisacooney wrote:
I have recently moved all of my files to a larger external hard drive
How did you move these files?

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

Upgrade itunes install new hard drive

Hi there.
Long long time iTunes user here. A while back I switched off automatic upgrades and have been sitting on version 9.1.1.12 for some time. I've been meaning to update it ... and now I'd like to do that and more: upgrade my C hard drive and convert to 64 bit Windows 7 (currently on 32bit Win7).
As such, my objective is to add the new C hard drive, install Windows 7 64 bit, then download & install iTunes 10.6.1 while keeping my library intact (playlists, ratings, play counts, etc).
I understand the difference between the Media folder (where the songs are) and the Music folder (where the library is). Currently my Media folder is on a separate hard drive (G-Drive) while the Music folder is on the C-Drive. My choices are to continue using the G-Drive as the Media folder location, or I can move all songs over to a network share located on Windows Home Server (where the music folder can be backed up). I understand how to change the iTunes Media folder location in the advanced menu, and how to select "Consolidate Library" to complete the copying process.
Once I select which option is best for the Media folder, here's what I am planning to do:
1. Copy of the iTunes Music folder and all subfolders (C:\Users\Master\Music\iTunes) onto a zip drive or network share
2. Install the new hard drive
3. Install Windows 7 64 bit
4. Install iTunes 10.6.1.
5. Replace the iTunes Music folder with the copy I made
6. Change the Media folder to the correct location (either G-Drive or network share on WHS)
Does that sound correct?
Once I install iTunes, should I replace the iTunes Music folder with the copy I made *before* I actually start (open and run) iTunes?
Once I start iTunes, can I simply change the default Media folder location so that it's pointed to the current location of the songs (either G-Drive or network share on WHS)?
Lastly, is it better (less complex, lower risk, etc) to simply keep my Media folder on the G-Drive, or does it matter?
Thanks a million for your guidance ... usually I try to figure everything out myself and not ask for help, but after having dealt with broken links in the past I want to be sure I don't mess up the library/media structure (not to mention lose playlists and ratings). Again, a big THANK YOU.

Can anyone help? Not sure who else to ask. Really appreciate it.

How can I re-install CS2 upgrade on a new hard drive without serial no. of previous Photoshop 5?

A new hard drive has been installed on my G4 Mac with OS10.4. I am trying to re-install CS2 Premium on the new hard drive but I no longer have the serial number of my previous Photoshop 5. I need to enter this as the CS2 was an upgrade. I have spoken to Adobe technical support but they no longer support CS2 so are not able to help. They recommended that I try the Adbe Forum. All my Adobe products have been bought legitimately. I know people manage to use pirated Adobe software so there must be some way for me to activate a legally bought product.

Michael
Thank you for your email and suggestion.
I have tried that and the only product listed is my CS5 Design Premium (which was an upgrade), none of my previous Adobe products are listed.
I am now looking to see if I can buy an old version of Photoshop that will work on a Power PC G4 Mac with OS 10.4.
I only need Photoshop on that Mac to paint from, not the rest of the Suite.
It is infuriating that I already have a legitimately bought Adobe product (as all mine have been) but I am unable to use it.
Regards
Trevor

Upgrading to new Hard Drives on XW4400 Workstation

Similar Messages

Maybe you are looking for