Upgrading to Snow Leopard & replacing battery on MacBook Pro 06

So I have a MacBook Pro, running Tiger, that I bought in November 2006. I have about 500$ to spend. I want to upgrade to Snow Leopard and the most recent version of iLife. I also need to replace the battery since it's dead (only lasts 20 minutes unplugged...).
Any suggestions on what I should buy exactly and how to proceed with the installation (meaning what to install first, and if I should format my computer before doing so)? Thank you!!

Purchase a new battery
Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751
http://www.apple.com/macosx/specs.html
*Upgrading from Mac OS X v10.4 Tiger.*
+If your Intel-based Mac is running Mac OS X v10.4 Tiger, purchase the Mac Box Set, which is a single, affordable package that includes Mac OS X v10.6.3 Snow Leopard; iLife, with the latest versions of iPhoto, iMovie, GarageBand, iWeb, and iDVD; and iWork, Apple’s productivity suite for home and office including Pages, Numbers, and Keynote.+
Installation of Snow Leopard has simple on screen instructions.
Repair permissions and restart your computer after upgrading.
Message was edited by: CMCSK

Similar Messages

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanks

Yes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

Does the disc look like this DVD?

Snow Leopard 10.6 on MacBook Pro 2,1

As the title suggests, I'm trying to install 10.6 on my MacBook Pro 2,1. I am getting into iPhone dev with a few of my colleagues, and one of the requirements is 10.6. However, when I previously tried installing the OS it told me it could not be installed on my computer due to my 32-bit EFI or something like that. I have read numerous accounts of people running Snow Leopard successfully on their MacBooks, an I am wondering what I am doing wrong.
System Specs:
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5
Thanks a Lot.

You probably are not running the retail disc, or have enough space, or migrated from PowerPC the migration assistant. The retail disk looks like *
Of course you should always backup your data at least twice before installation
- * links to my pages may give me compensation

Can i install snow leopard on my new macbook pro

I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link). Units from pre-July and last year can be found, and come with warranties just like brand new.

Help with Snow Leopard "Re" Install on Macbook Pro

I have a 2010 Macbook Pro. Upgraded to Lion. No problem. Last week, things got a little glitchy. A long download for iPhoto (among other things) would not work. I thought, why not upgrade to Mountain Lion. I purchase. Download... yet its not working, download corrupted. Tried again and again. Nothing. Tried to search some possible solutions, made it worse. System acted weird. Thought I should restart. Turned off. Would not start. Attempted safe mode start, bar goth 30% across screen, off. Put old Snow Leopard install CD in, booted from that. Started. Can't revert, but previously backed up important files, so I erase Mac HD. Pain in butt, but at least I'll start fresh, so I think. Every time I go to install from CD, it gets to the same 33 minutes to go and then and error happens saying it can't install the necessary support files. ??? What is going on? I'm prepared to scrap and replace the physical hard drive (not the first time, had a similar problem on my still going strong Mac Mini from years earlier. I just want to know if I'm doing something wrong, am I erasing wrong?
Suggestions appreciated greatly. I just want my laptop to work again!

Well, you have a mess.
Connect the Apple 10.6.3 DVD.
Reboot MBP with option key held down.
Choose SnowLeopard DVD
When DVD boots into install, choose Disk Utility from main menu
Choose the MBP drive in Disk Utility
Partition, 1 partition, option GUID, HFS Plus, Journaled
In Disk Utility FIrst Aid, Verify the Drive
Exit Disk Utility, but not installer
Start the Install from the Snow Leopard DVD
On reboot, follow additional setup procedures.
Choose Software Update, to get 10.6.8 updater and other files.
Go get coffee.
When updates are done, backup your MBP with TimeMachine.
Done.

Can I run Tiger and Snow leopard on a new macbook pro 15"

Hi
I have a Macbook running Tiger, soon to be replaced (I hope) by a
15" Macbook Pro Sno Leopard. Can I partition the drive on the MBP to run
Tiger also, as I have Adobe Creative Suite 2 and can't afford to upgrade that too. And I really don't want to run to computers.
Thanks

Welcome to Apple Discussions!
Snow Leopard will run CS2 with some limitations.
http://snowleopard.wikidot.com/start
Either find a Mac older than October 26, 2007 you can use until you can bring all your software to Snow Leopard compatibility from these sites*:
http://www.macmaps.com/usedrefurbished.html
Or find an alternative application for the functions you need from the first link that is Snow Leopard compatible if you can use that.
- * Links to my pages may give me compensation.

Can I install Snow Leopard on the latest Macbook Pros? (the ones pre-loaded with Lion)

The problem and solution is pretty simple, I just want to know if anyone has tried this before. I have a brand new Macbook Pro that I bought more or less for the sole purpose of having a more powerful machine to run AVID Media Composer on. AVID is only compatible up to OS version 10.6.7 at the moment, and the machine I got was pre-loaded with Lion, 10.7....So I look at the support documentation Apple provides, and notice that in the nifty little chart they have, the latest line of Macbook Pros out there (early 2011) originally had version 10.6.6, so I'm assuming that's the previous version I can't downgrade past.
To revert back to Snow Leopard, however, I need to install it from the DVD which has version 10.6.3 on it, and then upgrade to any version between Snow Leopard 10.6.6 and Lion 10.7. In theory this could work, the only problem being that for a brief time between installing Snow Leopard and updating to the version of it that I need, the computer will have version 10.6.3 on it.
Now I'm pretty sure if the only thing I do on the computer is immediately update to a safe-to-use version, there will be no problems. However, if the machine's hardware is so terribly non-backwards compatible with the Snow Leopard OS, I may do all this backing up and reverting and not even be able to start the computer once I get the old install on it. Before I just go ahead and try this for myself, I was wondering if anyone else has, and more importantly, have you had any success?

Hi r,
EDIT: disregard my post. Waiting for that disc is a far better option.
I hope w won't mind if I add a thought here:
rmo348 wrote:
Now I don't mind if some drivers are messed up and resolution is all funky when I install 10.6.3 on it, I just need to know if it'll be functional to the point where I can run the 10.6.6 update dmg. Once I update to 10.6.6 everything should work fine.
Or could I install 10.6.3, have the 10.6.6 update burned to a disc, and boot straight from that? This is my first Mac so I'm not sure what little tricks work or not.
Your first idea may work; the only way to know for sure is to try it. If you do, make sure you download and run the Combo update for 10.6.7 or 10.6.8. There can be different versions of a point update, those which are available for download, and those which ship on Macs, so you want to install one beyond that which shipped with some of the new MBPs.
If the MBP won't boot to 10.6.3, something else to try is installing it to an external HD, then installing the 10.6.7 update on it, clone it to the MPB's internal HD, and run the 10.6.7 or 10.6.8 Combo update on it.

Is it possible to use my snow leopard software for my macbook pro on an iMac or more iMacs?

Here is the reason why i'm asking this question that sounds silly to me in a way...... i got the 2011 15.4inches macbook pro 2 weeks ago ..... it came with the last snow leopard os x but since the lion was out and i was eligible for an upgrade i got it striaght away for free in the apple store and did not use the snow leopard.... now here is the situation.... i was talking to a friend last night and he told me to give him the CD for the OS x snow leopard that he wanted to upgrade his imac to that....but i told him that i did not think that would work because in most cases i know even in windows os these kind of CDs are protected and are made for that pc it is installed on but he kept on insisting it would work and telling me how experienced he is in using a mac for 7 years and what ever cd protection happened to only pc and not mac(the funny thing is that he said he has experience but has never tried it before) so to cut the long story short i told him that i would get back to him....... so here i am again today asking a question that might even prove my thoughts right.....
valuable community.....PLEASE IS IT POSSIBLE TO USE MY MACBOOK PRO OPERATING SYSTEM CD ON A FRIENDS IMAC? because i dont believe it is possible because if it was, no one will ever upgrade to any os in a mac... they will just look for oppotunities to get it from a friend or family who has one.... hope im not the only one thinking that this question is a silly one lol....... please i really need your answers to show this experienced mac user of 7 years since he told me that i can install my os on more macs.... how possible it that...i dont know...
Thanks in Advance for your replies

Hi Chris,
I'm guessing it's the "old" gray disc, which is usually hardware specific to your exact model. I'd keep it if I were you, you may want to install it.

Running Lion and Snow Leopard on the same MacBook Pro

So here's the thing .....apparently Lion won't run Photoshop and Illustrator CS2 (which I'm quite happy with and not about to shell out silly amounts of money to Adobe for even CS3) and apparently there may be (and I stress may be) problems with Word 2008 (likewise money to Microsoft for Word 2011).
I think, and probably won't know till I've installed it, that I'd like to try Lion on my Macbook Pro but keep Snow Leopard as a separate OS to run Photoshop, Illustrator and if necessary Word until I can afford to pay Adobe (& possibly Microsoft though I can't really see what improvements they can make to Word 2008) the large amounts of money they seem to think they deserve for an upgrade.
Does anybody out there know if it is possible to run both Lion and Snow Leopard on the same machine and if it is how do I do it?
Thanks for taking the time to read this.

Likely a corrupted cache file
Read the
Deeper cache cleaning/resetting
https://discussions.apple.com/docs/DOC-3046

Anyone install Snow Leopard on a 13" MacBook Pro and have any issues?

Just wondering if anyone is this forum installed Snow Leopard on a MacBook Pro 13" and what occured if any?
just want to know to really think before i upgrade.... getting really tense about this after seeing all these problems that are not only happening to third party apps but to the acctual system and native apps (safari, itunes, etc) Kinda Scared... i know Apple is a great company and does great things never imagined and im a big fan for 6 years when i was little, so i was surprised to see so many problems after release...

I am having a similar issue. I have upgraded my Mac Pro without any issues. However, my MB Pro has told me that the install was successful and was to restart. Upon restart the machine passes the initial boot (Apple Logo and Spinner) then it presents a black screen and will not complete the boot to the login screen. The fan is running, if I close the lid it tries to sleep, but does not appear to sleep. It is on and the light is solid (no pulsing for sleep).
I booted in verbose and the messages all looked good and then it posted the last messages to fast to see and it went to black screen.
Very Frustrating....

Snow Leopard on an older MacBook Pro

Hi everyone!
My companies' IT dept is having a garage sale. One of the items is a older MacBook Pro (prob around 2006) with a 2.3 g processer and 2g of memory. No OS, but in good working condition
My questions:
I have a Snow Leopard disc that I installed on my iMac years ago, can i use that again for this laptop? (i thought i heard more than one install is allowed from discs...?)
Will this model laptop run Snow Leopard OK?? what about Lion , Mt Lion?
Thx for any help!!

1. Probably not, as nstall disks are machine specific.
2.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

Snow Leopard Install problems on Macbook Pro with bad optical drive

I've tried this (refer to article below) to install Snow Leopard on a Macbook Pro with a bad optical drive, but I am not able to choose a wi-fi network, or install disk after startup. Is there something else I need to do?
To use Remote Install Mac OS X or Mac OS X Server:
Insert the Mac OS X or Mac OS X Server Install Disc into the optical disc drive of the other computer.
If the other computer is a Mac, open /Applications/Utilities/Remote Install Mac OS X. On Windows, choose "Remote Install Mac OS X" from the Install Assistant.
Read the introduction and click Continue.
Choose the install disc you want to use, and click Continue.
Choose a network connection: AirPort, if you are using an AirPort network, or Ethernet, if the other computer is on an Ethernet network and you have an optional Apple USB Ethernet Adapter connecting your MacBook Air or Mac mini to the same network. Click Continue.
Restart your MacBook Air or Mac mini and hold down the Option key as it starts up, until you see a list of available startup disks.
Click Continue in Remote Install Mac OS X.
If you chose AirPort as your network in step 5, on your MacBook Air or Mac mini choose your AirPort network from the pop-up list.
If the network is secure, you will be prompted for a password. You can enter a private network name by choosing the ellipsis (...) and typing the name.
If you chose AirPort as your network in step 5, when you see the AirPort status icon indicating signal strength, click Continue in Remote Install Mac OS X.
You can now reinstall software, reset your password or run Disk Utility using instructions from the User's Guide.

Are you able to connect the two via Firewire cable? If so you can boot the MBP into Target Disk Mode. Then boot the other computer from the OS X installer disc. The installer should detect the hard drive of the MBP as an eligible target destination.
If you have a spare hard drive or at least 10 GBs of usable space on an external drive, then you can create a small 8 GB partition on that drive. Then clone the installer DVD to that partition using the Restore option of Disk Utility. You can then boot the MBP from that partition using OPTION boot: Start the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the cloned DVD then click on the downward pointing arrow button.
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external partition.
Source means the OS X Installer DVD.
Message was edited by: Kappy

How do i get snow leopard into my 2009 macbook pro

i have a macbook pro and i want to hook up my new ipad to it. my macbook pro is from 2009 and i dont have snow leopard on it. everytime i try to dl snow leopard on it it tells me that i need version 10.8 software. im tech challenged PLEASE HELP ME!!!

You will need to purchase the Snow Leopard (10.6) DVD. See below for info.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Upgrading to Snow Leopard & replacing battery on MacBook Pro 06

Similar Messages

Maybe you are looking for