Upgrading to Windows 7 64bit

I recently purchased a new Satellite 510 series notebook. I came pre-loaded with Windows 7 32bit. I have my own copy of Windows 7 and I would like to install the 64bit version. Will I be able to do this and still use the computer? Will my Windows 7 DVD contain the drivers necessary to get my computer looking and working like it is now? Also, if I make a mistake, can I use the backup media DVDs to recover my system even if the Windows 7 64bit is installed? I'm a novice at this stuff, but I know there are comparability issues with 32 and 64 bit software. I don't want to completely screw up my computer.

First thing, call Toshiba to ask if computer can handle 64bit operating system. If yes, you can install the 64 bit OS in your computer. Windows will install native drivers for the computer. If you need a specific driver for a certain hardware, you will be able to download it at pcsupport.toshiba.com, just input the model of the computer.
Be sure to download the driver compatible to the model and to the 64bit operating system.
"DEREK"

Similar Messages

My iPhone 4 will no longer back up in iTunes after my upgrade to Windows 7 64bit.

I used to have Windows XP 32bit and everything worked fine.
I upgraded to Windows 7 64bit and installed iTunes 64bit (I've also tried running the installer as administrator [in the compatibility properties]).
iTunes will recognise it with no problems and I can drag and drop anything I want to the iPhone, but I can't back up.
Software versions: iTunes v10.4.0.80, iPhone 4.3.5.
When I try to back up, the loading bar with either:
Have a loading bar with diagonal lines forever or,
it will start moving and freeze.
I've tried leaving the process for hours, but to no avail.
While the back up is being attempted, iTunes still retains full functionality.
I would exit by sliding the bar on my iPhone (iTunes will retain the loading bars as if frozen) and then unplug it. At this point iTunes takes a few seconds to drop the loading bar altogether, and the little screen will reset to normal functionality.
I believe this may be a iTunes-Windows thing as I did the following with my old laptop (Windows XP 32bit):
Installed iTunes for the first time.
Went into preferences and disabled the automatic backup option.
Plugged in the iPhone, right-click "back up".
The back up took less than 5 minutes.
I don't understand why my main PC can't back up my iPhone.
Can anyone help please?
I've tried researching the same problems and I've ended up doing the following:
Reinstalling iTunes,
Tried changing the iTunes installation folder to "Program Files" instead of "Program Files (x86)",
Deleting all contents from: "C:\Users\[Username]\AppData\Roaming\Apple Computer\MobileSync\Backup",
Deleting the apps from my phone in case there are corrupt apps (doesn't make sense though as it backed up fine on my old laptop).
I would appreciate any suggestions!
Kind regards,
Will

Hi there,
I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
I tried all of these without success:
- deleted backups via iTunes / Preferences
- deleted backups from sync folder
- created a new admin user and tried to sync
- reinstalled iTunes
- ran all Windows updates, restarted, reinstalled iTunes
- ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
Any hints welcome,
Cheers,
Miguel-KA

W8-Display too bright on lowest level after upgrade to windows 8 (64bit)

Display is too bright on lowest level after upgrade to windows 8 (64bit)
Hello,
does anyone know how to get the old drivers for w7 to work?
or is there another solution?
My installed driver:
Mobile Intel series 4 express chipset family MS corp. -WDDM 1.1
8.15.10.2702
even on cloudy day it hurts my eyes... (my temp solution is dimScreen app- black filter on top of all windows)
Fn+Home/End
funny thing is that the scale which shows on top left corner has like 11 steps but only top 8 works
also the old bottom page brightness scale (15 steps) disappeared.
background info:
X301-2776 so IMO it is GM45
i had w7pro i i have over installed it with w8pro both 64
thanks ahead for any ideas

success
this makes the trick - old drivers for win vista 64bit
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd649ww.exe
and for 32-bit
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd549ww.exe

Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit). When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number. This model doesn't show one. Any thoughts?
Thanks!

Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

IQ770 upgrade to Windows 7 64bit Ultimate Edition

Hello Everyone,
I know this is not supported - but I have always been disappointed w/ some of the flaws in the factory installation that came w/ this machine. I experienced screen flickers and network issues w/ my Media Center Extenders which were connected to my IQ770 since I had this machine.
Finally this weekend I decided to wipe out the factory OS and install Win7 Ultimate 64bit - and all devices were recognized in Device Manager along w/ no more flickers or network issues!!! Not to mention that I gain access to all 4GB of RAM, which I upgraded several months ago. So - I'm pretty sure I will be sticking w/ this installation of Win7 64bit, regardless of what I find out here in the forums.
My question(s):
Anyone know of a version of the TouchSmart application that I can download and install on Win7 x64? I have attempted to download a version for another TouchSmart PC but it will not install on this OS.
Anyone else done this - and have you found alternative drivers which work better, over the Windows drivers that came OOB or via Windows Updates?
Thx ahead of time!

Install this first so the system is stable
http://support.microsoft.com/kb/976972
As for TouchSmart applications you would need to find 3rd party ones. This model only supports single touch.

P-35 Patuinum XP Pro 32BIT- To Upgrade to Windows 7 64Bit???

Hello and this what I have at present >
MSI P-35 Platinum MoBo/3.3GB DDR memory/Intel Core2 2.4 Q6600 CPU/ Nvidia GeForce PCI-e 8600GT-512MB /500GB Internal WD HDD/500GB Ext, WD HDD/WinXP SP2/ NERO 9/ recently purchased Pinnacle Studio MovieBoard PCI card that doesn't work with XP Pro 32Bit, SP2, that's one of the reasons I'd like to upgrade.
Technology can be expensive. Always changing. I would like to upgrade from XP PRO 32,to Windows 7- 64, granted, I would rather have 8GB memory for my MEM hungry Photoshop CS4, but because of my 32Bit OS, I can not. Is it worth it to upgrade to the 64Bit,then have to upgrade my 8600GT, then buy more Ram (I have 4 sticks @ 1GB each) will have to replace with 8GB.
Can anyone tell me if my optical CD/DVD drive swill be ok, or a non-issue?
Epson NX300 Scanner/Printer all-in-one? Intel Core2 Quad 6600?
MSI P-35 Platinum MoBo? Will all this be a nightmare....OR stick to 32 Bit Windows7? If I build my own, I was thinking of getting the OEM system build version of Pro 7.
Change is scary...and can be very expensive as well. Took me a long tome to change from Windows 98 to XP, Love XP...will I love Windows 7?
I want to do video editing too. I bought the pinnacle Studio MovieBoard and studio12 software, but having issues with the capture..most tell me to upgrade to fix issues. I'm getting sound capture, but no video using composite connections to analog Camcorder.
I use the MSI Liveupdate utility for my MSO MoBo, but if I want to download drivers and save them on a flash drive to install after the clean install of Win7, I can get them all here @ MSI?
Are there any other peeps out there who just might happen to have my same board and is upgrading from WinXP/32 to Windows 7/64, and is there any thing I need to know?
( I went to download the Nvidia Geforce 8600GT driver from MSI, but under the list my model doesn't even come up? 8600GT #512-P2-N756-TR, I thought it better to get it from MSI since they are the Mobo maker as opposed to going to Geforce. Does it matter?

Depending on hardware, you can expect somewhere between 2.5 ~ 3.5 GB of usable RAM. The 32bit OS can address 4GB of address space. Part of this address space is RAM, but also, the onboard components and VGA are in the address space. Today's VGAs often have a large amount of video RAM and that eats into the address space. If you have a VGA with 2GB of ram or a crossfire/SLI configuration, you can expect far less Physical RAM to be available in a 32bit OS.

The Undock button not appeared when we upgrade to Windows 7 64bit

Hello,
I have a problem in my laptop LATITUDE-E6410 after we upgraded the OS from Win XP to Win 7 64bit.The problem is the when i trying to undock the laptop from the dock station,Windows goes to freeze and i have to shutdown it from power button.So i want to make undock from start menu but i can not find this option and also there is not Eject option to undock the laptop safely.When i searched for that problem i found that there is an update for the ACPI but i can not find that update in dell website.So is any help for that ??
Thanks

Hi Sys Support,
Thanks for the post! I would first suggest making sure the chipset drivers are up to date with the latest released on our support site, as this issue started only after updating your operating system its likely this is the result of a software / driver problem.
To help makes sure all of the latest updates are installed on the system you can use the Dell Command | Update Software HERE, This software should automatically scan your systems drivers and install any updates available from our support site.
We have also released several BIOS updates for this unit, some with improvements to docking functionality. Please find these updates HERE.
Let us know how it goes!

Portege R700-17Z - Upgrading to Windows 7 64bit

Hi,
I currently have a Toshiba Portege R700-17Z.
I want to increase the amount of RAM from 2GB to 8GB, and as a result I want to run Windows 64 bit. I was planning on running a clean reinstall, but is 64 bit Windows built into this machine? Or will I need a separate disk?
If I need a separate disk, any ideas on how to do this without an optical drive?
Many thanks!

At first info about RAM upgrade: You are right. You can upgrade your Portege up to 8GB and compatible 4GB modules have part number PA3677U-1M4G.
According notebook specification your Portege was delivered with WIN7 32BIT PROFESSIONAL but it is supported for Win7 64bit. 64bit drivers and Toshiba specific tools and utilities can be downloaded from Toshiba download page.
What is your decision now? If you need some assistance with OS installation let us know.

Satellite A300D-15B - Upgrade from Windows 7 32bit to 64bit?

I've added an extra 4GB of memory to my Satellite A300D-15B (PSAKCE). When I try to run the Windows 7 64bit upgrade it fails with a blue screen.
Is it possible to upgrade this model to 64 bit Windows 7?

Hi ronchennells,
Theoretically it should be possible to upgrade to Windows 7 64bit You can do/install everything what you want but the important point is drivers
On the official Toshiba website there are no Windows 7 64bit drivers but you can try the Vista 64bit drivers. Normally they are compatible
Generally speaking its not necessary to upgrade to 4GB RAM or more for using Windows 7 64bit. You can also use the 64bit version with 2GB only.
What happens if you start the upgrade with original memory module only?

Laserjet 4200 drivers for Windows 7 64bit

ok...ive upgraded to Windows 7 64bit to test on our network and come to find HP is lacking on the drivers for my laserjet!!!
I need a solution for this.
thank you

In Windows 7 Prof 64 bit I got my HP 4200DTN to work kind of. In Windows install a network printer, have it look for the driver in Windows 7 prof 64 bit. Now with that said it will make it print, duplex BUT if you have an envelope feeder like I do you are SOL, THANKS TO HP. Their solutions is to buy one of their cheap Chinese printers. I will not do that because the HP 4200DTN will print and does a good job in my network. Before I buy one of their cheap Chinese piece of crap I will get rid of Windows. Still trying to find a work around. The HP printer driver web page has a Universal Printer Driver for the HP 4200 but a lot of features are not supported. Tray 1 envelope feeder ( no support ) you can take the feeder off and feed tray 1 by hand to print envelopes HANDY!!! Just like starting your car with a crank!!! Would not hurt HP to provide drivers for the HP4200DTN, with the envelope feeder. They are so busy trying to SELL, SELL, SELL the new Chinese cheap crap. HP had a problem with their DeskJets in the 90's, paper feed rollers and gears broke. They talked me into a HP 8600Pro Premium, going to send it back. I am going to try my hand at fixing my HP OfficeJet 7310 All-In-One that quit working. It has been a good printer since purchase 6 years ago. I puchased a parts machine today. With any kind of luck I will have the needed parts to make my HP 7310 live. Don't need their cheap Chinese Junk. They don't want to have the service they used to provide. Spend all day on the phone and get transfered all over the world and back again, no help. Sick of it!

Y410 and windows 7 64bit

Since upgrading to windows 7 64bit I have a couple items that I can't seem to find drivers for. I look in my device manager and there are 3 items that are not working correctly. Two of them say Base Sysytem Device and one say Unknown Device.
Any help with these is greatly appreciated.
Thanks

Probably the card reader. Try the Vista 64 driver
for your model of laptop and type of card reader
if available.

Emailing pictures in PSE7 after upgrading to Windows 7

I just upgraded to Windows 7 64bit Home Premium from Vista 64bit Home Premium. It looks like my PSE7 files moved over without any problem even though I haven't had time to do much with it yet. I am howevr looking for a solution with the email. I followed all the directions for setting the drfault email program.........which is Outlook.........it shows it as the default email program but it will not send the pictures. It gives me the follwing message:
"PSE could not finish creating your E-mail message.
Please make sure that Microsoft Outlook is selected as the default E-mail program in the Windows Internet Conrol Panel, and that all dialog boxes in Outlook are closed. If this is the first time you are using Miscrosoft Outlook, please run the Outlook application and complete its set-up process before sending mail through Photshop Elements."
What am I missing here?
Candy

Hey Candy, I'm here trying to find out if PSE7 will run in Windows 7, 64 bit, haven't found out yet but I can see I may have your problem when I go to Windows 7.
Concerning your problem, if you mean Outlook Express, I don't think that Windows 7 has Outlook Express as part of the system like the old Windows used to. Outlook Express is history! I'll be watching this to see what solutions may be posted.
Ron

Windows 7 64bit 4gb RAM yet only 2.46 usable

Ive read other posts on this, but they all seemed to be people running 32bit OS's.
Ive got 4gb RAM installed, and Windows sees this. I upgraded to Windows 7 64bit and at the start it was using the full 4gb. Something has changed in the last week and it only shows as 2.46 gb usable and 4gb installed. If i disable detection in the bios and use discrete. it goes up to 2.9gb
Can anyone help me as there is 1.5gb being wasted somewhere. I run with switchable graphics set to high performance.

The T500 will for sure show 2.46GB if you're running switchable graphics and a 32-bit OS.
The key point is verifying that the system is indeed 64-bit.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Upgrade to Win 7 (64bit) from Vista 32 - Not enough H Disk space after running Windows easy transfer

Hello all!
I upgraded from Vista 32 to Windows 7(64bit) using the custom install as per instruction found on Lenovo and the upgrade has gone well. My machine is running much better and faster now. However, I tried to transfer my files with easy transfer and I have run out of room on the HD. After the install, my C drive had about 35 Gigs with no other programs installed except for Win 7. This seems to be too much memory used for win 7 OS. I am thinking that other data like past restore data may be taking up a lot of room? Also my Easy transfer file is 79 gigs which also appears to large of a file. I have not been able to use Easy Transfer because of lack of drive space. Can I reformat my HD and run a new win 7 install from the Win 7 upgrade software CD?
Thanks in advance?

Problem Solved!!!
This problem was related to the NVIDIA chip defect on the mother board. Please see:
http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61-Nvidia-Quadro-NVS-140M-garbled-displ...
Thanks!

Z61t upgrades to allow windows 7 64bit?

I have a z61t - 9441 CTO
I didn't think far enough ahead (ahem, i was cheap) when I bought it, so it only has a Core Duo (T2400) right now. I'd love to upgrade to Windows 7, but it seems that I can only run the 32bit version with this CPU. Since I'd like to keep this laptop for a while, i'm considering upgrading, and I have a few questions:
1. Based on this page (http://www.thinkwiki.org/wiki/Intel_Core_2_Duo_%28Merom%29 ) I think I can fit a Merom Core 2 Duo in the laptop... Does anyone know if all the Meroms listed there as compatible with the z61t are the same socket (Socket M) - or if this model had different motherboards available for the different CPUs? I.e. will a Merom C2D fit?
2. Can someone confirm that I'd be able to run 64bit Windows 7 if i upgraded the CPU to a Core 2 Duo? Is there anything else in the laptop that's not compatible with 64bit Win7?
Solved!
Go to Solution.

you can use the T7xxx or the T5xxx Merom CPU, only the socket M version will work.
The T5xxx and T7xxx CPU supports 64 bit and Virualisation Technology VT), which allows you to use XP emulation mode in some of the Win 7 versions.
Core Duo supports VT but not 64 bit.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Upgrading to Windows 7 64bit

Similar Messages

Maybe you are looking for