Upgrading Win 8/10 to pro version fails on Yoga 3 pro
Hi. I tried to upgrade the win 8 install that the yoga came with to pro but after the install completed and rebooted, the message was the upgrade could not be completed please try again later. I let Win10 upgrade to win 10 home and tried to upgrade that to pro and hit the same issue. Also, as others have mentioned, i have wifi issues where it is picky on seeing only some access points. I was hoping win 10 would fix it but no such luck. Any help would be appreciated!
As for the wifi issue, you can try the new Windows 10 drivers by filtering for Windows 10:
http://support.lenovo.com/ca/en/products/laptops-and-netbooks/yoga-series/yoga-3-pro-1370-laptop-lenovo
As for the key upgrade, my upgrade to Windows 8.1 Pro was smooth through the Add Features dialog. Is the Windows 8.1 Pro key accepted as an upgrade option in Windows 10 Home?
Similar Messages
-
Bootcamp upgrade Win 7 Pro 64 to Win 8 fails
I'm trying to upgrade Win 7 to Win 8. Install goes to 90% then message -"your computer will reboot in a few moments" then a few minutes later message
"install failed" and it rolls back to Win7.
This is on an early 2012 17" Macbook Pro I7 2.4 running Win 7 Pro 64. I installed the new bootcamp drivers, tried disabling all unnecessary devices-audio/lan/bluetooth etc,, tried clean boot, disabled video card all with the same result.
I ran the System Update Readiness Tool and retried the install with the same result.
Tried install from desktop and DVD
Hope someone can help-thanksHappened to me, too.
I realized that on my Windows 7, "bcdedit /export" resulted in the same error ("The handle is invalid." == ERROR_INVALID_HANDLE == 0x00000006). Apparently the problem is not in Windows 8 but in the running Windows 7.
So I followed the procedure here:
http://support.microsoft.com/kb/927392/en-us which is renaming the old BCD and peforming "bootrec /RebuildBcd". (Note: Without renaming the original BCD, "/RebuildBcd" did nothing effective.)
After that, "bcdedit /export" started to work. Upgrading to Windows 8 also went through.
Thanks Bolean for the hint. -
I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware. -
Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?
Problem now resolved as I upgraded to Snow Leopard 10.6. Seems App Store doesn't like anything previous to 10.6.
-
Tried upgrading to 10.8.2. It failed the upgrade. Currently the Software version shows " System Version:
OS X 10.8.1 (12B19)" . But App store does not show 10.8.2 as an updateYou can Contact MAS here.
-
I have a macbook pro and using photoshop elements 12. I dont have a problem before but since i upgraded my mac to an new version IOS Yosemite, then begun the problem. It always sotock or freeze. What should i do?
properly uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
Can logic pro 9 be upgraded if i have the Express version?
HI,
Can logic pro 9 be upgraded if i have the Express version?
because when i try to do it, ask me for my Logic Studio SNr. and i just copy my Logic Express SNr. and doesn't work !
Is that normal?I'm not sure I understand the wording of your question.
If you mean "Can I upgrade Logic Express 9 to Logic Pro 9?" the answer is yes, you can.
When you get the upgrade, if you already had LE9 installed on your system, the installer will already know your existing serial number, and it will be asking you for your new serial number of the upgrade. If you are trying to put in your old serial number here, this won't work, it's the serial number of the upgrade it's asking for.
If you are having serial number issues and believe you are using the correct serial numbers, then you'll need to contact Apple for help. -
I tried to upgrade from XI Standard to Pro and it says I already have a more current version, but it's not Pro. What do I need to do to get Pro (installed, not the membership service)?
uninstall acrobat standard, clean and then install, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
-
HPhasing problems upgrading to iOS 7.0.2 version
Izatrini wrote:
...problems upgrading to iOS 7.0.2 version
Then...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?
Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
Problem description:
Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
EtreCheck version: 2.1.8 (121)
Report generated 6 February 2015 08:40:29 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 75
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:13:14
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
BUFFALO HD-PVU2 500.11 GB
EFI (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
Launch Agents: ℹ️
[loaded] com.hp.help.tocgenerator.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Skype UNKNOWN (missing value)
Safari Application (/Applications/Safari.app)
Dropbox Application (/Applications/Dropbox.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 184
Oldest backup: 2010-12-10 15:37:39 +0000
Last backup: 2015-02-06 02:49:24 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 184.16 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% ConnectService
1% Skype
0% systemstatsd
0% launchd
Top Processes by Memory: ℹ️
193 MB Skype
168 MB mds_stores
132 MB com.apple.WebKit.WebContent
107 MB Mail
99 MB ocspd
Virtual Memory Information: ℹ️
889 MB Free RAM
1.99 GB Active RAM
455 MB Inactive RAM
825 MB Wired RAM
1.11 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 6, 2015, 08:27:32 AM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
Feb 6, 2015, 08:25:19 AM Self test - passed
Feb 5, 2015, 04:37:08 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
Feb 5, 2015, 10:01:02 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
Feb 5, 2015, 12:03:59 AM /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:58:58 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:54:35 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 11:49:03 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
Feb 4, 2015, 09:40:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
Feb 4, 2015, 09:38:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
Feb 4, 2015, 09:27:56 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
Feb 4, 2015, 09:25:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
Feb 4, 2015, 09:20:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
Feb 4, 2015, 09:18:10 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
Feb 4, 2015, 09:12:54 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
Feb 4, 2015, 08:40:48 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
Feb 4, 2015, 08:22:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
Feb 4, 2015, 12:11:35 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
Feb 3, 2015, 09:44:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
Feb 3, 2015, 05:40:21 PM /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
Feb 3, 2015, 09:05:45 AM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
Jan 28, 2015, 06:10:42 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
Jan 21, 2015, 10:51:25 PM /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
Jan 20, 2015, 11:12:47 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
Jan 18, 2015, 09:57:31 AM /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
Any further assistance will be appreciated -
my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ?
I got my case from owc computing
thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage, and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.
I am gratefful , just please help on the hard drive question as external ,
thanks
just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
and I then will be able to upgrade to Snow Leopard and i life 2011.Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
Upgrade Windows 8.1 to Pro Issue
I am trying to upgrade my Windows 8.1 machine to pro. I am doing this via DVD and product key I purchased. When I try to perform the upgrade the only option I get when I am asked, "Choose what you want to keep" is nothing. I would like to keep
everything and don't understand why I can't.Hi,
What DVD did you buy? It seems that you got the full Windows 8.1 pro. If so, we cannot use it to upgrade to Windows 8.1 pro, besides clean installation.
To upgrade Windows 8.1 to pro version, we just need to buy the Windows 8.1 pro pack:
Windows 8.1 Pro Pack
http://www.microsoftstore.com/store/msusa/en_US/pdp/Windows-8.1-Pro-Pack/productID.288392300
Then, we can follow these steps to do the upgrade, and we may not lose anything:
Right click This PC -> Properties -> Get more features with a new edition of Windows -> I already have a product key
Then, type the key you bought, and restart the computer.
Hope this could be helpful.
Kate Li
TechNet Community Support -
Problems connecting to the internet after Upgrade from windows 8.1 pro
Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
ThanksHi,
You can also try to install the older version in compatible mode:
Windows 8.1 Wifi showing "limited" or "No Internet Access"
Solution: revert your network adapter driver back to an older version
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
In addition, disable power management on your network driver:
Open Network and Sharing Center.
Click the Change adapter settings link in the upper left of the navigation pane.
Right click the network connection you want to enable/disable power management support on and click Properties .
Click Configure .
On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
If the issue still persists, please upload the event log for our research:
Kate Li
TechNet Community Support -
Switch version fail. CCX 8.5.1SU4 - 9.0.2
Hey All.
When i try to switch-version from version 8.5.1su4 to 9.0.2 then after app. 30 min, the cli says "Sync after switch version failed" and then stops.
I have tried to reinstall the 9.02 on the inactive partion, but still the same issue. all network connectivity (DNs, NTP etc.) is running så they should not be any network issue that causes this.
I have also tried to force a switch-version thru the recovery CD, and the swtich version goes ok, and the 9.02 comes up, but no services will start (Waited 45 min - and monitor the utils services list on the console)... so im back on 8.51su4.
Installation is on vmware version 5.0 and is SA
On the console, i can se 1 error in the startup,
But the interface is actually answering from remote.
Anyone have any idea what i could be??
(the refresh file was install before the the upgrade file...)
Best Regards
Thomas JohannesenHey Aaron
Here is the log files.
As i can se in the files it comes with this error :
WARNING: server initialization failed, or possibly timed out (if -w was used).
Check the message log, online.log, for errors.
2013-01-28 12:40:30,501 - uccxdb.util - CRITICAL - Error in executing the cmd [su -c 'source /opt/cisco/uccx/bin/uccx_ids.env ; oninit -wyv' informix], retCode [1]
Mon Jan 28 12:40:30 CET 2013 :: Error while installing files for UCCX DB instance
Mon Jan 28 12:40:30 CET 2013 :: -------------------------------------------------------------------
Mon Jan 28 12:40:30 CET 2013 :: Moving sysadmin db to sadmin dbspace
Mon Jan 28 12:40:30 CET 2013 :: sadmin_exist 2
Mon Jan 28 12:40:30 CET 2013 :: Moving sysadmin database
1809: Server rejected the connection.
Mon Jan 28 12:41:00 CET 2013 :: Error moving sysadmin DB
Mon Jan 28 12:41:00 CET 2013 :: Stopping DB
Mon Jan 28 12:41:00 CET 2013 :: ------Stopping uccx database-------
Mon Jan 28 12:41:05 CET 2013 :: Waiting for port to be released
Mon Jan 28 12:41:05 CET 2013 :: The port is released
Mon Jan 28 12:41:05 CET 2013 :: ------UCCX database stopped--------
Mon Jan 28 12:41:05 CET 2013 :: DB upgrade script failed
Mon Jan 28 12:41:05 CET 2013 :: Restoring repicaition status of the databse
At least two servers must be defined for replication.
The requested operation will not be performed.
Mon Jan 28 12:41:05 CET 2013 :: ./uccx_sv_db.sh 8.5.1.11004-25 9.0.2.10000-71 8.5.1.11004 rpmdb: Program version 4.2 doesn't match environment version error: db4 error(22) from dbenv->open: Invalid argument error: cannot open Packages index using db3 - Invalid argument (22) error: cannot open Packages database in /partB/var/lib/rpm package UCCX02_lib is not installed /var/log/active/platform/log/cli.log
Script uccx_sv_db.sh failed with exit code 255.
in the uccx_install.log file. and after that i runs the rollback script.
Have no idea why this error is showing.
Best regards
Thomas
Maybe you are looking for
-
External display for T520 not detected
Hi! I have ThinkPad T520 and Samsung 17'' display with DVA output. I bought DVI-VGA adapter and connected the display to laptop's VGA input. The external display is not detected - it is not present in Windows 7 display properties and it shows "No con
-
Is it possible media could be saved to the Touch?8Gb
Although there is no way at the moment to save things (pictures, videos, etc) directly from the web. Is it possible that you would be able to do this on the iPT? perhaps in Feb once the SDK has been released? Can media other than iTunes media be save
-
Hi, We are encountering an issue while removing the payment block for the invoices. When the payment block "R" is removed manually, we are finding that the number of days for payment are getting enhanced automatically in the document. Please let me
-
Don't like ios 7.0.4
-
Hi All, I have a Idoc to file scenario , where i need to group the idocs with respect to a field from the Idoc. Is this possible in graphical mapping? If not which mapping is preferable. Thanks, Thomas