UPGRADING WITH A PERFECT BATTERY BUT WITH HIGHER NUMBER OF CELLS
i m using HP PAVILION DV5 1104-TU ENTERTAINMENT NOTEBOOK PC since 4years, recently its motherboard got crashed so after a wrong reply ,finally i got the motherboard from ebay which was perfectly apposite for my model,now its battery is not giving backup so i wanna buy a new battery but with 12cells or even more for extra backup, my battery's part no is 484170-001,my laptop screen is 15.4", 2gb ram,intel core 2duo, i wanna buy it from ebay but please provide the right battery which will fit with ease, as in my earlier post for motherboard the first reply was for a wrong motherboard as they s, do provide some ebay links for the higher number of cells if possible plus if i get to know about hours of backup
Yes, it will sit a little higher in the back due to the thicker battery. This will not harm the notebook. Generally speaking, an extended cell battery will cost significantly more than a standard battery. Think of the extended cell battery as a V8 and the standard battery as V4. The V8 is bigger and costs more than the V4. The one I linked to on eBay was about half of what the battery is from HP directly. Anthony82 provided a battery as well, but it's a non-OEM battery which typically means it's not an actual HP battery (think third party). LIke the one Anthony82 provided, I don't see any indication that the battery in the expert's link is a genuine HP battery. This might account for why is is significantly less as I don't see how a genuine HP battery can cost $20-$35 USD as I would imagine it costs more than that to make it.
To answer your question, the one the expert gave you does mention your specific notebook model. If it doesn't work, then that falls on the eBay seller.
You have many options to choose from, so choose the one that you are most comfortable with. If you want to look for a genuine HP part, you can look for HP part number KS526AA.
Let me know if this answered your question.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Similar Messages
-
With iMovie 9 I get a perfect video but with iMovie 10 it is very blurry. Why?
With iMovie 9 I get a perfect video but with iMovie 10 it is very blurry. Why?
Hi
In ichats prefs click on video and change bandwidth limit to 500. -
i have an iphone 3gs the old battery was useless so i replaced it with a new battery but it wont hold a charge now it used to charge to old battery but would just turned off if disconnected to its not the dock connecter any advice
Advice:
1. Learn to use punctuation and sentence structure - your post makes little sense.
2. I'm getting the idea you now want to use your old "useless" battery. Why, if it's useless? -
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .
HI All,
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.235.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLAN Controller 5508
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 10.125.18.15
Last Reset....................................... Software reset
System Up Time................................... 41 days 5 hrs 14 mins 42 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... US - United States
--More or (q)uit current module or <ctrl-z> to abort
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +20 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 10
Number of Active Clients......................... 61
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
AP Bundle Information
Primary AP Image Size
ap3g1 5804
ap801 5192
ap802 5232
c1100 3096
c1130 4972
c1140 4992
c1200 3364
c1240 4812
c1250 5512
c1310 3136
c1520 6412
c3201 4324
c602i 3716
Secondary AP Image Size
ap801 4964
c1100 3036
--More or (q)uit current module or <ctrl-z> to abort
c1130 4884
c1140 4492
c1200 3316
c1240 4712
c1250 5064
c1310 3084
c1520 5244
c3201 4264
Press Enter to continue or <ctrl-z> to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Press Enter to continue or <ctrl-z> to abort
Network Information
RF-Network Name............................. OGR
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
--More or (q)uit current module or <ctrl-z> to abort
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Fast SSID Change ........................... Enabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or <ctrl-z> to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or <ctrl-z> to abort
AP Summary
Number of APs.................................... 8
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
KNOWLOGY_DC01 disabled -
KNOWLOGY_DC02 disabled -
--More or (q)uit current module or <ctrl-z> to abort
KN1252_AP01 disabled -
KN1252_AP02 disabled -
Anham_AP03 disabled -
ANHAM_AP01 disabled -
ANHAM_AP04 disabled -
ANHAM_AP02 disabled -
Press Enter to continue or <ctrl-z> to abort
AP Location
Total Number of AP Groups........................ 3
Site Name........................................ ANHAM8075
Site Description................................. ANHAM 8075 Location
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
Site Name........................................ Knowlogy_DC
--More or (q)uit current module or <ctrl-z> to abort
Site Description................................. DC Center Access points
WLAN ID Interface Network Admission Control Radio Policy
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
Site Name........................................ OGR
Site Description................................. 1934 OGR Office
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
7 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Site Name........................................ default-group
Site Description................................. <none>
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
5 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
9 knowlogy_ogr Disabled None
10 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Press Enter to continue or <ctrl-z> to abort
AP Config
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch IP Address.................. 10.125.18.15
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
--More or (q)uit current module or <ctrl-z> to abort
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 11
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or <ctrl-z> to abort
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:1d:71:09:8f:90
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 44
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
--More or (q)uit current module or <ctrl-z> to abort
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211b
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
--More or (q)uit current module or <ctrl-z> to abort
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
--More or (q)uit current module or <ctrl-z> to abort
Current Tx Power Level .................... 1
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
--More or (q)uit current module or <ctrl-z> to abort
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 22
WLAN 2 :........................................ 21
WLAN 4 :........................................ 25
WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 3
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:a5:0c:30
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 20
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 15 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 36
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 5
Cisco AP Name.................................... KN1252_AP01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:ef:06:50
IP Address Configuration......................... DHCP
IP Address....................................... 10.125.18.101
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.125.18.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ Knowlogy Conference Rooms Side
Cisco AP Group Name.............................. OGR
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.4.10.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Medium Power (15.4 W)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
AP Image......................................... C1250-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX122990L5
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
Native ID :..................................... 118
WLAN 1 :........................................ 111
WLAN 2 :........................................ 111
WLAN 4 :........................................ 112
WLAN 6 :........................................ 112
WLAN 7 :........................................ 111
WLAN 9 :........................................ 112
WLAN 8 :........................................ 112
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 26 days, 00 h 24 m 39 s
--More or (q)uit current module or <ctrl-z> to abort
AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
Join Date and Time............................... Wed Oct 9 10:59:07 2013
Join Taken Time.................................. 0 days, 00 h 00 m 50 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 7
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:22:55:df:a5:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... SUPPORTED
MCS 1.................................... SUPPORTED
MCS 2.................................... SUPPORTED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
--More or (q)uit current module or <ctrl-z> to abort
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 ..........Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App -
Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
Base raw files can be given with exposure bracketing during shooting, for example.
The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
Thank youThe plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.
-
I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.
My original question :
I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features? -
SoundBlaster 5.1 no surround sound with the speaker test, but with movies
ISoundBlaster 5. no surround sound with the speaker test, but with moviesO Hello I have a new SoundBlaster XFi Surround 5. USB.
I installed the drivers on Vista 32.
I connected the Soundblaster with an optical cable with my home cinema system.
I checked the 5. speakers option in the Creative Console Starter.
When I will test the surround function by clicking the speakers in the surround test diagramm from the Console.
The front speakers are sending an testsignal, but the rear speakers and the center are silent.
I thought that are settings in the soundcontrol from vista but when I play an Movie with 5. sound, the rear speakers function.
Is ist the optical mode that only support the movie dts signal? Why the Console test from creative doesn't function?
I have further applications but they don't work. Only movies.
ThxHi,
S/PDIF?format can only transmit 2 channels of uncompressed audio, which is why you only hear the front channels. For movie dts, an encoded compressed stereo data is transmitted through the S/PDIF optical link to your home cinema system which then decode it into 5. audio. -
We have iPad and ipad2 with one email address but two owners. How can we share purchases, receive same email messages but have individual accounts at the same time? Can we have same Apple User ID with different passwords? Hepl!
Aside from the fact that we have hijacked this thread - which we really shouldn't do - you would probably be better off posting questions or seeking advice in the iCloud portion of the Apple Support Communities. I'm sure that there are a lot of more experienced iCloud users on that site than I am.
I'm not a big believer in iCloud at this point, so my experience with it - other than downloading past purchases - is really pretty limited. I would not want to steer you down the wrong path.
However, here is the Apple iCloud support website that is loaded with all sorts of information and links to even more information. This will get you started anyway ....
http://www.apple.com/support/icloud/ -
<pre><nowiki>This is what I see when I open Firefox, only with a bullet for every line
Yahoo!
Yahoo!
Yahoo! Search
Web
Images
Video
Local
News
More
Search:
Open Search Assist
Make Y! your homepage
Sunday, December 16, 2012
Hi, RobertSign Out
Profile
Account Info
Select Color
Slate
Grass
Bubblegum
Violet
Tangerine
Ocean
You are signed in as:
r_schrootr_schroot
MailNo new email1
Yahoo! Sites
Reorder or Remove
Yahoo! Sites
Real EstateReal Estate
MailMail
BookmarksBookmarks
FinanceFinance (DowDown)
FlickrFlickr
GamesGames
JobsJobs
MessengerMessenger
MoviesMovies
DatingDating
SportsSports
WeatherWeather (44°F)
More Y! Sites
FAVORITES
Reorder or Remove
FAVORITES
GoogleGoogle
hotmailhotmail
amazonamazon
netflixnetflix
This Old HouseThis Old House
FacebookFacebook
Add Favorite
QuickViews are moving to My Yahoo!
Transfer your QuickViews to My Yahoo! before mid-April when they'll be moved from Yahoo.com. My Yahoo! is an entire page personalized just for you, so it's the perfect place to check in with the content you care about. Learn More
Transfer QuickViews to My Yahoo!
ADVERTISEMENT
Turn the tables on
your mortgage banker.
Rates at 2.5%
$160k loan $632mo.
Quick 30 sec. Quote
Reuters Videos
Portraits of Newtown's shooting victims
Friends and relatives share memories of those who died at Sandy Hook Elementary School. ‘Smiley 6-year-old’
Related links
Survivors struggle
Obama to visit families
Hero teacher kept calm
More stories
Reuters Videos Glimpses of lives lost These are some of the heroes from Newtown. (The Atlantic Wire) Heroes from Conn. massacre Obama to travel to Newtown, Conn., on Sunday. (Larry Downing/Reuters) Obama to visit families A message is seen on a candle outside the St. Rose of Lima Roman Catholic Church in Newtown, Conn. (David Goldman/AP) Shooting victims identified John Kerry to be nominated to be Secretary of State, sources say. (J. Scott Applewhite/AP) Kerry to replace Clinton?
1 of 45
Previous set of stories Next set of stories
News
News
Reuters
Gun control vs. liberty
Yahoo! News' Walter Shapiro explains the dichotomy facing Americans in the wake of Friday's shooting.
Supreme Court fight looms over right to carry a gun
Saber-toothed cat fossils found near Las Vegas
Venezuelan elections a test for Chavez's movement
Portraits of Conn. shooting victims show lives at their very…
Man fires some 50 shots in California mall parking lot
White House won't accept new tax offer from Republican leader
A children's choir opens 'SNL' with 'Silent Night'
Okla. teen arrested in school shooting plot
Medical examiner: all Sandy Hook victims died of multiple…
Politics
·Video
·Photos
·Local
·Opinion
·Trending Now
·Weather
updated 7:34 AM
Markets:
Dow: 13,135 -0.27%
Nasdaq: 2,971.3 -0.7%
S&P: 1,413.6 -0.41%
Enter stock symbol
Politics
Secretary of State Hillary Clinton (Morne de Klerk/Getty Images)
Hillary Clinton faints, suffers concussion
The secretary of state is recovering at home and hopes to be back in the office "soon."
Crop insurance juicy target in 'fiscal cliff' deal
High court fight looms over right to carry a gun
Militants battle Pakistani police after attacking airport
Local
Wheaton, IL
44° F
45° / 32°
1 dead, 2 injured in overnight shootings on West…- Chicago Trib…
Questions — and possible answers — about Big East…- Daily Herald
Bones found in car in Chicago River might be…- Chicago Sun-…
More Wheaton, IL News
Health
Clinton sustains concussion; Benghazi testimony postponed
President's pot comments prompt call for policy
Experts: No link between Asperger's, violence
Bayer seeks U.S. FDA approval for radium-223
World
Family of nurse found dead after British royal hoax arrives in…
Rocket still centerpiece as NKoreans mourn Kim
Syrian Islamist rebels take Aleppo infantry base
Spanish savers fall victim to friendly bankers
Show All Loading...
News
Entertainment
Finance
Health
Lifestyles
Local
Politics
Science
Sports
Technology
World
TRENDING NOW
Watch the show »
01 Stroke
02 Connecticut shooter Adam Lanza
03 Gun control debate
04 Nelson Mandela surgery
05 Connecticut school shooting victims
06 Church explodes on thieves
07 49ers vs. Patriots
08 Rupert Murdoch gun control
09 Packers vs. Bears
10 Hillary Clinton concussion
AdChoices
Save Big Today - Ad Feedback
MUST-SEE VIDEOS ON YAHOO!
Star NFL rookie still sleeps on the couch (Y! Sports' Outside the Game/Getty Images) Star NFL rookie still sleeps on the couch
Star NFL rookie still sleeps on the couch
Easy tips for creating a man cave (Y! Homes DI Why Not) Easy tips for creating a man cave Easy tips for creating a man cave
Wind nearly knocks down truck (Y! Screen) Wind nearly knocks down truck Wind nearly knocks down truck
Tiny baby deer will steal your heart (Purina) Tiny baby deer will steal your heart Tiny baby deer will steal your heart
MOST POPULAR
11 qualities of the perfect woman ('Daily Shot' on Yahoo!)
"Perfect woman" qualities A men's magazine's cheeky list sparks a debate.
A tornado of jack fish off the coast of Mexico
Stunning fish "tornado" photo It took three years of waiting to capture this shot.
Nine tax measures set to fall over the cliff (Corbis)
9 tax laws set to expire Jan. 1 Payroll tax is just one slated to take a big jump.
How much pet actors make in Hollywood ('Celebrity Pet Project')
Star animals' salaries (VIDEO) One four-legged actor makes $3500 a day.
Boy band One Direction (Jim Spellman/Getty Images for Jingle Ball 2012)
Top-selling 2012 album A two-year-old disc beat out all the newcomers.
POLL
Which of these 2012 'top obsessions' intrigued you most?
Which of these 2012 'top obsessions' intrigued you most?
Which of these 2012 'top obsessions' intrigued you most?
The iPhone 5
Political polls
Lottery jackpots
View Results »
5,704 votes
Yahoo! Year in Review: The top 10 list »
MARKETPLACE
Sell online for $25.46/mo 1st yr.
Set up your online store with
Yahoo! Small Business
YAHOO! ORIGINALS
Celebrity Pet Project Play Video
Celebrity Pet Project
Salaries of Hollywood's scene-stealing pets
Daily Shot With Ali Wentworth Play Video
Daily Shot With Ali Wentworth
'Perfect woman' qualities?
Mansome Play Video
Mansome
Guy's bold tattoo proves a little tough to take
Omg! NOW Play Video
Omg! NOW
Heather Locklear and daughter wow on the red carpet
The Yo Show Play Video
The Yo Show
Bizarre foreign titles for American movies
Previous Next
1 to 5 of 17
MORE YAHOO! SITES
Answers
Autos
Dating
Finance
Games
Groups
Health
International
IntoNow
Jobs
Local
Maps
Movies
Music
News
omg!
Real Estate
Shine
Shopping
Sports
Travel
TV
Voices
Yahoo! en Español
Downloads
Get the Yahoo! Toolbar
Get Yahoo! on Your Phone
Get Yahoo! on Your Tablet
More Services
Follow YAHOO!
Follow Us:
Facebook
Twitter
YAHOO! FOR YOUR BUSINESS
Small Business Solutions
Advertise with Us
ABOUT YAHOO!
Company Info
Careers
Developer Network
Yahoo! Blog - Yodel
Help
Feedback
Copyright © 2012 Yahoo! Inc. All rights reserved.
Privacy Policy
About Our Ads
Safety
Terms of Service
Copyright/IP Policy
Yahoo!
Hi,
Robert
Profile
Account Info
You are signed in as:
r_schroot
Search</nowiki></pre>A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode -
How do I print a booklet with a colour cover but with black and white inside pages?
Hi there,
I need to print a large amount of booklets, which have a colour cover but are grayscale on the inside. However, I am having trouble setting up my document to successfully do this and I am unsure if it is something I can change in InDesign or if it is something I should figure out with my printer driver?
We used Page Plus for these booklets in the past and were able to do this with the same printer, so that makes me think there might be setting I could change in InDesign to achieve the same result.
It integral that the printer knows that the inside pages of the booklet are black and white, as we get charged per copy for colour printing and it is vastly increasing our printing costs.
My coworker believed that exporting the file as a PDF with the options: Colour Conversions (convert to destination - Pressure Numbers), Destination (sRGB IEC61966-2.1), and Profile Inclusion Policy (Don't Include Profiles) is making a difference. However, I don't believe is is the case.
If anyone had another suggestion that I could try, that'd be great!!@Eugene – do you have details for "Export as Grayscale"?
I tried with the following details:
Target-Profile: Dot Gain 15%
Convert to Target Profile
Include Target Profile
If I do it this way I get:
Target Profile not included
Wrong numbers for my colors
(I tested with a self-made color wedge on the page for the percentages of Black shown below)
Seen in Acrobat Pro 10 with proof simulation "Dot Gain 15%":
100 % Black => 100 %
80 % Black => 82 %
60 % Black => 63 %
40 % Black => 43 %
20 % Black => 22 %
I could convert to "Dot Gain 15%" in Acrobat Pro's Preflight Panel, but this would show the same wrong percentages (just tested).
What I can do, however, is printing to PostScript with color separations, only color channel Black.
That would work, if I chose a Distiller setting, that will not change the color, to convert my separated PostScript file to PDF.
Seen in Acrobat Pro 10* with proof simulation "Dot Gain 15%" or any of the other available gray scale profiles.
(Acrobat Pro 11 might get this wrong due to a bug)
100 % Black => 100 %
80 % Black => 80 %
60 % Black => 60 %
40 % Black => 40 %
20 % Black => 20 %
This separated PDF (channel Black only) can now be converted with a self-made correction* in Acrobat Pro's Preflight Panel to a gray scale PDF/X-1a.
If done right * the color values stay as defined in inDesign.
Output in my case:
PDF/X-1a
OI: GrayScale profile Black ink of ISO Coated v2 300%
Tested with:
InDesign CC 2014.2
Distiller X
Acrobat Pro X
Mac OSX 10.7.5
Uwe
* There are several, convoluted steps necessary to get this (hope, I can remember them all):
Not optional:
Have a grayscale profile representing the channel Black of your intended output CMYK or generate one!
In my case the base CMYK profile was: ISO Coated v2 300%.
And I got a "Black Ink of ISO Coated v2 300%" profile for Grayscale conversions by generating this with my PhotoShop app.
Maybe optional, but helpful:
Change the color settings of Acrobat Pro X to use the color settings file you generated in PhotoShop where:
Grayscale is defined as the black channel of ISO Coated v2 300%: "Black Ink of ISO Coated v2 300%"
Mandatory, but somehow tricky:
Then on to the Preflight Panel of Acrobat Pro to generate a custom preflight profile.
None of the ordinary ones will fit exactly (at least in my Acrobat Pro X).
1. Make a duplicate of an already stored Preflight profile that converts color to Gray. Name it appropriately.
2. Include a single correction for converting to Gray Scale (at this time, or if you do something like that the first time, it's not possible to change or duplicate that single correction)
3. Save your new profile. Close the profile.
4. Open the profile again.
5. Now, suddenly it's possible to duplicate that single correction (converting to Gray Scale).
Do some changes, appropriate correction options, eg. adding "Black Ink of ISO Coated v2 300%" as OI to the PDFs you will convert.
4. Use that duplicate single correction in your new Preflight profile.
5. Save your custom preflight profile. -
I have no Audio in Firefox. I think this is an old problem with Dell IDT driver and Firefox. Flash is installed, I have uninstalled and re-installed two or three times, removed pluggins and put them back to no avail. The native win 7 driver from 2010 works okay in all browsers including firefox but I would like an up-to-date driver that works. The latest IDT driver for my Dell e6500 running Win 7 pro works great in IE and Chrome but not Firefox.
I don't think there was any setting I could change on the driver. Firefox did not show up in the mixer or volume control. It is there with the native win 7 driver. This driver doesn't seem to see Firefox. I just got this computer, but looking for help, posts three years ago on the web seemed to have this problem with the Dell e6500 and Firefox.
-
firefox 4 is not compatible with norton antivirus program. i need a solution for this
mohanSymantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
The core Norton components such as antivirus and firewall will still work, it will just be the add-ons that are not currently compatible.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles -
File with appropriate disk space, but with nothing on it!
Hi!
I have this friend whom accordingly recorded some her stuff. Everything was fine then somebody did something with it (and can't explain what exactly) and now it's still as big as before (like 700 Mo of disk space) but when you open it, well there's nothing!
Do you know what probably happened? Or if there is a software which ccan help retrieve the lost data (if indeed this seems the case)?
Thanks a lot and sorry for the bad english, good night to you all!
Miranda.
Message was edited by: Miydrasctrl-click the file, open the media folder, drop the contents into a new GB project.
-
When I stream iplayer with Apple TV using my iPhone it works fine but when I try the same thing with my iPad I can only get sound and a box on the tv that says ' internet radio'. Any tips please?
Safari on Macbook or other PCs does not support Airplay to AppleTV. Some people have added this support using Safari extension called ClickToPlugin but it only works for appleTV Ver 4.3 or older.
It would be a very useful addition to Safari. Granted that YouTube and other video sites are supported directly on the appleTV but searching is so much easier on the PC.
I wish appleTV or Safari product manager or a developer sees this and can add support for this to Safari natively. It will surely help for better adoption of both Safari and appleTV ! -
Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2
Maybe you are looking for
-
Cannot install Adobe Pro on MacBook Air
Purchased and downloaded Adobe Pro, but now will not install. Appears on my dock bar, but when I click it, it will not do anything.
-
[solved] Problem with ssd disk, deleted files don't free space?
Hello. I bought some time ago an ssd disk on which i installed arch. After some free time I changed my laptop optical drive with standard hdd and moved /home and folder with data (mainly music collection) to standard drive. To my surprise my ssd was
-
Using External Display WITHOUT mirroring or extended desktop
I asked this question about a month ago and it seems to have been deleted for some reason. I have a broken screen on my Intel iMac G5 for reasons I don't wanna get into here, but trust me, it's not covered under the warranty. I have a great Sony LCD
-
FR: Full Screen Preview of Multi-Camera Angles
The Program monitor can be viewed in Full Screen mode, as we all know, but when the Program monitor is displaying Multi-camera angles, it can only viewed in windowed mode. Full Screen mode no longer works in this situation. This is inconsistent, il
-
INS0009:Unable to connect to the database. Verify the connect information
please i need help about this message, i have no idea what could mean this. i got this error when I try to create new repository in "Oracle 9i Warehouse Builder Repository Assistant".