Upgrading with multiple serials on account

Right now I have two serials on my account, CS4 Production Premium and CS5 Design Standard. If I upgrade to Creative Cloud, which serial would the upgrade be applied to? My company is wanting me to upgrade my copy of CS4 to Creative Cloud and give CS5 to another employee but I'm not seeing a way to remove that serial from my account... I just don't want to upgrade the wrong product.

Ken G. Rice wrote:
What I meant to say was just in regards to getting the Intro Offer price because you own a qualifying CS product. Once you qualify for the Intro Offer price you are not required to run the Creative Cloud on that same machine.
Thanks Ken. That's what I thought.
So the OP can get the Cloud without tying it to an existing CS serial number (per his original Q).
The mere fact of owning a previous version serial qualifies him for Intro Pricing for the Cloud. No other effect on previous version licenses or serials.
In essence, they'll have six activations available (2 x CS4, 2 x CS5 and 2 x CS6 Cloud).

Similar Messages

FecthAccounts on resources with multiple types of accounts

Hello,
I'm customizing the rename user form so I can modify some account attributes that are related to
accountId and rename them in a propper way. For getting all account attributes on all resources I set
fetchAccounts form property to true but only attributes on resources whose identity template is
simple - It's not a resource with multiple types of accounts - are retrieved.
The attributes of the resource with a setup of multiple types of accounts are not retrieved with fecthAccounts
set to true. Has that happened to you ?
Any clue ?
Thanks,
Pablo C.

You can use Correlation Id for this Purpose. Producer should set Correlation id while posting the message and Consumer can check for Correlation id while dequeue.
I did have this requirement before and used correlation id for it.
http://sriworks.wordpress.com/2009/10/22/conditional-dequeue-mq-adapter/
Or Just Accept Opaque Payload and tweak in BPEL Process using TranslateFromNative function.

Problems with multiple e-mail accounts on Droid 2 & also can't put phone into Silent mode

I just received my Droid 2 and having a problems with having multiple e-mail accounts.
My original droid worked fine with all of this.
I have 2 different personal e-mail accounts setup.
When I click e-mail, it just defaults to the default e-mail address and I have no way of switching accounts. I have to change the default e-mail account in order to view the other account.
Along with having a shortcut on the home page to each e-mail account, it always just goes to the default one and no way of adding a shortcut to both.
When I did this on the original droid, i could choose which e-mail account I wanted a shortcut for and could obviously have both on the home screen.
I also have found no way to NAME the accounts, ex. Comcast & Work.
That way I could distinguish the difference between the 2 on my home screen even if I could get a shortcut to both.
not sure how this could be overlooked but I sure dont think there is a way to make this happen.
Also, what is with 2.2 System and not allowing you to put it in silent mode?
I updated my original Droid to 2.2 and could no longer make it silent with the volume button on side or going into the sound settings and changing it to silent, it would always stay on vibrate.
And now it does the same thing with Droid 2. I cant make it silent at all.
Any ideas on either issue

becker800 wrote:
ok I got the silent problem fixed.
The update changed vibrate to be always, even when on Silent mode.
The e-mail problem however is stll an issue and I realy hope they release an update to fix this.
I'm sure I'm not the only one with 2 e-mail accounts on their droid.
I never had an original Droid, so I can;t compare to what was on that. For me, I am using the "Messaging" app - it seems to be set up for multiple e-mail accounts better than the email app. Messaging is the one recommended by the manufacturer - give that a try.

Error After BAPI_PO_CREATE1 with multiple Lines "Enter Account Assignment"

Hi,
I am trying to Post Purchase Orders with Multiple lines using BAPI_PO_CREATE1 and got error
"Enter Account Assignment". This is happening when I post PO with multiple line items.
I am trying the same PO with one record, PO is creating successfully. Do I need to put any additional data.
I am creating PO with Item Category 'D' and Account Assignment 'N' and external number range and internal number range.
Pls let me know, Do i need any additional flags for this.
Thanks,
naini

Hello all,
please help!!
I used function BAPI_PO_CREATE1 to create PO with limit item but function returned message error '518 No account assignment exist for service line 0000000000'. Can anyone give me an idea to slove this problem? for your information, I used parameters below to run this function.
POHEADER
POHEADER-COMP_CODE = '1205'
POHEADER-DOC_TYPE = 'GZPO'
POHEADER-VENDOR = '8000001313'
POHEADER-PMNTTRMS = '0001'
POHEADER-PURCH_ORG = '1222'.
POHEADER-PUR_GROUP = 'K05'
POHEADER-CURRENCY = 'THB'
POHEADER-EXCH_RATE = '1.00000'
POHEADER-EX_RATE_FX = ' X'
POHEADER-DOC_DATE = '10.06.2008'
POHEADERX
POHEADERX-COMP_CODE = 'X'
POHEADERX-DOC_TYPE = 'X'
POHEADERX-VENDOR = 'X'
POHEADERX-PMNTTRMS= 'X'
POHEADERX-DSCNT1_TO = 'X'
POHEADERX-PURCH_ORG= 'X'
POHEADERX-PUR_GROUP = 'X'
POHEADERX-CURRENCY= 'X'
POHEADERX-EXCH_RATE= 'X'
POHEADERX-EX_RATE_FX= 'X'
POHEADERX-DOC_DATE= 'X'
POHEADERX-INCOTERMS1= 'X'
POHEADERX-INCOTERMS2= 'X'
POITEM
POITEM-SHORT_TEXT = 'TEST'
POITEM-PLANT = '5005'
POITEM-MATL_GROUP = '606100001'
POITEM-QUANTITY = '1.000'
POITEM-PO_UNIT = 'AU'
POITEM-ITEM_CAT = 'B'
POITEM-ACCTASSCAT = 'K'
POITEM-DISTRIB = ' '
POITEM-PART_INV = ' '
POITEM-PCKG_NO = '0000100001'
POITEMX
POITEMX-SHORT_TEXT = 'X'
POITEMX-PLANT = 'X'
POITEMX-MATL_GROUP = 'X'
POITEMX-QUANTITY = 'X'
POITEMX-PO_UNIT = 'X'
POITEMX-ITEM_CAT = 'X'
POITEMX-ACCTASSCAT = 'X'
POITEMX-DISTRIB = 'X'
POITEMX-PART_INV = 'X'
POITEMX-PCKG_NO = 'X'
POSCHEDULE
POSCHEDULE-PO_ITEM = '00001'
POSCHEDULE-SCHED_LINE = '0001'
POSCHEDULE-DEL_DATCAT_EXT = 'D'
POSCHEDULE-DELIVERY_DATE = '01.09.2006'
POSCHEDULE-QUANTITY = ' 1.000'
POSCHEDULEX
POSCHEDULEX-PO_ITEM= '00001'
POSCHEDULEX-SCHED_LINE = '0001'
POSCHEDULEX-PO_ITEMX = 'X'
POSCHEDULEX-SCHED_LINEX = 'X'
POSCHEDULEX-DEL_DATCAT_EXT = 'X'
POSCHEDULEX-DELIVERY_DATE = 'X'
POSCHEDULEX-QUANTITY = 'X'
POACCOUNT
POACCOUNT-PO_ITEM = '00001'
POACCOUNT-SERIAL_NO = '01'
POACCOUNT-GL_ACCOUNT = '0065903020'
POACCOUNT-BUS_AREA = '70'
POACCOUNT-COSTCENTER = '0010700003'
POACCOUNT-ORDERID = ' '
POACCOUNTX
POACCOUNTX-PO_ITEM = '00001'
POACCOUNTX-SERIAL_NO = '01'
POACCOUNTX-PO_ITEMX = 'X'
POACCOUNTX-SERIAL_NOX = 'X'
POACCOUNTX-GL_ACCOUNT = 'X'
POACCOUNTX-BUS_AREA = 'X'
POACCOUNTX-COSTCENTER = 'X'
POACCOUNTX-ORDERID = 'X'
POSERVICES
POSERVICES-PCKG_NO = '0000100001'
POSERVICES-LINE_NO = '0000000001'
POSERVICES-OUTL_IND = 'X'
POSERVICES-SUBPCKG_NO = '0000100002'
POSERVICES-QUANTITY = ' '
POSERVICES-BASE_UOM = ' '
POSERVICES-GR_PRICE = ' '
POSERVICES-FROM_LINE = '000001'
POSERVICES-TO_LINE = '999999'
POSERVICES-SHORT_TEXT = ' '
POSERVICES-MATL_GROUP = ' '
APPEND POSERVICES
POSERVICES-PCKG_NO = '00100002'
POSERVICES-LINE_NO = '0000002'
POSERVICES-OUTL_IND = ' '
POSERVICES-SUBPCKG_NO = ' '
POSERVICES-QUANTITY = '1.000'
POSERVICES-BASE_UOM = 'AU'
POSERVICES-GR_PRICE = '43,486.21'
POSERVICES-FROM_LINE = ' '
POSERVICES-TO_LINE = ' '
POSERVICES-SHORT_TEXT = 'Demurrage'
POSERVICES-MATL_GROUP = '606100001'
POSRVACCESSVALUES
POSRVACCESSVALUES-PCKG_NO = '0000100001'
POSRVACCESSVALUES-LINE_NO = '0000000001'
POSRVACCESSVALUES-SERIAL_NO = ' '
POSRVACCESSVALUES-QUANTITY = ' '
APPEND POSRVACCESSVALUES
POSRVACCESSVALUES-PCKG_NO = '0000100002'
POSRVACCESSVALUES-LINE_NO = '0000000002'
POSRVACCESSVALUES-SERIAL_NO = '01'
POSRVACCESSVALUES-QUANTITY = '1.000'
POLIMITS
POLIMITS-PCKG_NO = '0000100001'
POLIMITS-LIMIT = '1.00'
POLIMITS-EXP_VALUE = '1.00'
APPEND POLIMITS
POLIMITS-PCKG_NO = '0000100002'
POLIMITS-LIMIT = ' '
POLIMITS-EXP_VALUE = ' '
please help
Thank you for advance

How to handle iTunes Match with multiple libraries (one account, 5 family members)?

How would this work, in the situation below ...
Everyone has their own iCloud account (for their own syncing purposes).
But we (family) ALL share the same iTunes account (for purchasing).
How will this work, since we all have our own iTunes libraries?

One person sets up Match on their computer using the iTunes account. Uploads everything to match.
I would recommend waiting until that person is done, and do computers one at a time. No particular reason, just seems sensible.
Next person sets up match using same iTunes account details. Uploads their stuff. They will then see everything the previous user put into the system, unless you select "Hide music not on this computer" in the view menu. Previous user will now see their stuff too.
Rinse and repeat.
This is how it worked with my multiple machines anyway... As long as every computer uses the same iTunes account for the store, you all get access to the same Match account.

FaceTime issues with multiple devices & one account

I have an iPhone 5s, an iPad Mini and 2 iPod Touch devices, all on the same account and Apple ID. Is there any way to iMessage or FaceTime from one device to ONE other device(not all of them)? Thanks!

You can create another Appleid and use it only for FaceTime and/or messages on 1ipad.
In this manner you can maintain a parent account for all and have child accounts for messaging only.
You would simply log out of messages and log in with new id

One Activity Number with multiple G/L Account (service procurment)

Hi Experts,
We have a problem, we want to create one service activity number (ac03), but we want to use multiple G/L accont . (we want to open one activity number, but we want that it should behave that we have opend several activity number). How can it possible, I know only one G/L can be used for one valuation class and only one valuation class can be maintained in ac03.
How can I do this.
Regards
GR

Hi,
For same activity u cannot assign 2 different GL ac, Better U create one more Activity with little difference in Description. & assign the diff val class.
regds,
CB

Upgrading with multiple lines

My phone (primary line) is available for an upgrade in October, but my wife's (secondary line) isn't until April. We're both grandfathered with the unlimited data plans. If I upgrade mine in October, the family plan will convert to the tiered data plan. What does this do for my wife's phone? Will she continue to have unlimited data until she upgrades, or will she be forced into the tiered system? Is there a way that she can early upgrade as well, without having to pay full price?

As long as you go into the tiered data when you upgrade in October your wife will be able to keep her unlimited until she upgrades. If you want to upgrade your wife's phone in October as well you could pay the ETF which would probably be about $100ish with how long you have been on contract. You also may be able to get the upgrade in October if you've been with Verizon long enough but that is no guarantee.

Multiple Signatures on Exchange/Outlook 365 with multiple connected pop3 accounts wanting sepearate signatures

I was referred here from another thread, see
http://community.office365.com/en-us/f/158/p/245124/778388.aspx#778388but not sure if this is the right forum, so please move/correct my posting if needed!
It's a exchange/Outlook365 query, relating to signatures
I have several connected pop3 accounts to the exchange mailbox, but there appears to be no way to have separate signatures for each connected account, in fact there appears to be only 1 signature for the entire account? So when I send emails I can select
from several different from addresses, but the signature remains the same ...
On desktop outlook 2003-2010 at least, there is the ability to have default reply, default new message signatures for each account in use, is there a way to configure the exchange/outlook365 OWA to do this ?
I'm about to test if an outlook 2010 desktop client allows/recognises the server side linked accounts and allows email to be sent from them, so any tips or points on that would be welcome!
thanks

In Outlook2010 you can set multiple signatures, yes.
If you connect to those accounts LOCALLY using POP3 you can also then set defaults for each account ... HOWEVER
if you set the CONNECTED ACCOUNTS via OUTLOOK365 via the cloud server, the local Outlook will not let you set default signatures for each account. Yes you can have signatures and manually select them, but that's not the same thing, and leads to mistakes.
The whole point of connecting the accounts via the Cloud is that the local PC is then no longer part of the critical path when away from the office, so if the local PC crashed or lost internet, then it would not affect mail delivery to the single exchange
mailbox, for access via the web or mobile devices. Quite important. A common failure we have on local outlook pop3 connections is a single password failure to login, leaves the pop up menu on screen and then stops all other pop3 mail collection from working.
We have tried for 2+ years to solve this "password failure popup", but as the passwords are saved and don't change and the problem persists, we wanted to move to the cloud ... and avoid problems when users are away.
Last but not least, if using the cloud to send a reply to a mail via a connected account, the email is not sent as the connected account (despite it being validated for send as) but sent using a "<exchange Primary email> send on behalf of <pop3
connected email>" which defeats to whole point of connecting the accounts and verifying them!
I've got to say when even Google can get this right! why can't Microsoft? It really does suck!
For a business class product having 1 signature per user within OWA is seriously deficient.
Maybe time to move our email needs to Google, as on searching the depths of old archives it does appear these issues have been raised for several years, yet nothing has improved ... shame on Microsoft.

Hdd upgrade with multiple partitions

I currently have a 250gb hdd with lion and a bootcamp partition of windows 7.
I would like to upgrade my hdd because I am running out of room.
I understand that I could most likely back up the entire drive to an external, then install the new hdd and reinstall the backed up data. That should put both partitions the way they were onto the new hdd. At least that is what I think.
But I would like to have a bigger partition for windows and I am unsure how I would do this correctly. I don't know if reinstalling the backed up data to the new drive, deleting the bootcamp partition, then creating a new partition and reinstalling my same windows would work. Would I even be able to install windows a second time on the same computer without having to buy another key?
Final thoughts:
     1. Will backing up the entire drive to an external, then install the new hdd and reinstall the backed up data put both partitions the way they were onto the          new hdd?
          a. Will the OSX partition get all the new space?
     2. How do I get a bigger windows partition on the new hdd, while keeping all of my existing windows content?
Thank You for the help

Use Windows software to backup your Windows system. When you setup your new Windows partition on the new hard drive reinstall Windows then restore your backup from the backup drive you use for Windows. You don't need another key as long as you don't have the same key active on more than one computer.
Similarly, for OS X backup your current system to an OS X backup drive. See the following:
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

3.1 upgrade with multiple databases

We have 3 Oracle databases (10g) with APEX on a server. Two databases run with APEX 3.0 & one still runs with APEX 2.
I want to upgrade to APEX 3.1. I ran the apexins script against the APEX 2 database, but now I'm faced with the step of copying the new 3.1 images over the old image file. My questions is what will happen to my existing 3.0 APEX installations if I copy the new image files?

Hello,
>> For some reason, I was able to run both APEX 2 & APEX 3 on the same server,…
By “on the same server” you probably mean the same HTTP server. This is a supported configuration. A single OHS can support more than one APEX instance, and they don’t have to be the same version. A single database can’t support more than one version of APEX.
>> … but I can't figure out why except to say that the 2.0 and 3.0 images were somehow compatiable …
New ‘images’ directory, for a newer version, usually add features – icons, themes, templates etc. – to the directory, and don’t delete old stuff. Even the built-in JavaScript library maintains backward compatibility. That means that early version of APEX, like 2.x, can find anything it needs in an ‘images’ directory from 3.x version.
>> But it looks to me like the 3.0 & 3.1 images are incompatible.
I’m not sure what you mean by compatible, but the 3.1 version of ‘images’ is quite different – content and structure wise - from the 3.1 version. Still, application that was built using 3.0 should run with the 3.1 ‘images’ version. The reverse direction is, of course, not possible.
Regards,
Arie.

Using Time Capsule with multiple Macbook Pro accounts

I have had a 500 GB Time Capsule for a number of years, using it both as a router and hard drive. I recently added a 2TB Time Capsule, which I plan to use exclusively for storage and the 500 GB Time Capsule for the router and to store the Time Machine backups. When I only had the 500GB Time Capsule, I could switch between users on my Macbook Pro and still have access to the data that was stored on the Time Capsule without having to log the original user out. I am finding that with the 2TB Time Capsule, that if I switch users not only do I have to log out the orginal user, but I also have to disconnect that user from the Time Capsule. Is there anyway to setup the Time Capsule where I will not have to do this, as it is very tedious and time consuming.
Thanks in advance.

In the 5.6 utility there is an option to disconnect all users.. this should fix it in one go.
Download and install the 5.6 utility.. it has far superior controls to 6.0 which is more a NOUN utility than VERB.
A number of issues were introduced with Lion and 7.6 firmware on the TC..
You can try going back to 7.5.2 firmware although the later Gen4 TC seem to not allow themselves to go back earlier than 7.6.
The older and simpler TC.. might be better as a file store.. Open it up and put a 2TB disk in it.
At least if that works.. well may as well use it.

FileNotFoundException with multiple keywords

With multiple keywords 'pi_keyword=account and manager', my program generates: java.io.FileNotFoundException.......sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:702). But the url works fine in IE address box. In addition, if only single keyword
'pi_keyword=account ', my program works no problem. Any solution? Thanks.
The following is my program:
URL url = new URL(str);
URLConnection connection = (URLConnection) url.openConnection();
connection.setDoOutput(true);
BufferedReader in = new BufferedReader(
new InputStreamReader(connection.getInputStream()));
The fullurl is:
http://jobs.workopolis.com/jobshome/db/work.process_job?pi_post_date=&pi_smart=N&pi_sort_col=&pi_employer=Dummy&pi_advertiser=Dummy&pi_category=Dummy&pi_industry=Dummy&pi_msg=LOCATION&pi_language=EN&pi_keyword=manager and account&pi_location=British Columbia

I think whitespace isn't allowed in the keyword values, what do you get if you replace space with '+'?
That is: "pi_keyword=account+and+manager" and "pi_location=British+Columbia"

Multiple serial port initialisation problem

Good Morning All
I have attached a vi which is giving me a problem that I can't solve, and would appreciate any help.
The vi is supposed to intialise up to 7 serial ports (only using 5 at the moment), and I'm assuming this is a plausible way to do the initialisation (could be wrong). The serial ports are connected to a pc via a usb hub. The windows XP o/s does recognise the ports according to the device manager.
The problem is that when the vi is run the following error is reported as shown in the attached word document.
I have compared the port settings in the device manager properties for each port to the vi settings and they match. What more can I do?
If somebody has a setup with mutliple serial ports could they try the vi and see if it works for them?
Thanks and best regards
Ray
Solved!
Go to Solution.
Attachments:
ax500 serial port init.vi ‏37 KB
init error.docx ‏518 KB

It has nothing to do with multiple serial ports. It has to do with an invalid setting you are trying to use to configure any one of the serial ports.
Look at the information in the error message. Argument 4 of the property node in Configure Serial Port VI is the Stop Bits setting. I see a coercion dot going into that VI, so that tells me the datatype you are wiring in doesn't quite match.
You have an array of I32 values, and your values consist of 1's. Disconnect that array and right click on the terminal of Configure Serial Port VI and pick Create Constant. You'll see you get a ring data type. It is a U16. But if you look at the items in there, you'll see that stop bits 1.0 has a value of 10. 1.5 has a value of 15, 2.0 has a value of 20. So the value of 1 has no meaning to that property node and you get an error. You should be wiring in a value of 10.
Delete that array. Create an array of the ring constants. Turn it into a control, and choose the correct ring value for each element of your array.
You have several other coercion dots. They may not be causing you problems, but I would consider disconnecting them, creating a constant of the correct datatype, and using that in the array you wire to the Configure subVI.
I modified your VI and attached it. See if it works for you.
Attachments:
ax500SerialPortInitMOD.vi ‏37 KB

I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
Mick

Moving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Upgrading with multiple serials on account

Similar Messages

Maybe you are looking for