Upgrading wlc4402 software version

hi
i want to upgrade the software version of my wlc4402-50-k9 but i don know how to go about it,cam anyone help with a step by step approach

Hi Moakofi,
This should get you started;
You can upgrade the Cisco WLC with either one of these methods:
GUI
Command-line interface (CLI)
When a controller is upgraded, the code on its associated access points is also automatically upgraded. When an access point loads code, each of its lights blinks in succession.
Note: Do not power down the controller or any access point during this process. Otherwise, you might corrupt the software image.
The upgrade of a controller with a large number of access points can take as long as 30 minutes. The access points must remain powered, and the controller must not be reset during this time.
Cisco recommends this sequence when you perform an upgrade:
Upload your controller configuration files to a server to back them up.
Turn off the controller 802.11a and 802.11b networks.
Upgrade your controller.
Re-enable your 802.11a and 802.11b networks.
This document provides the steps to follow in order to upgrade the WLC with each of these methods.
Wireless LAN Controller (WLC) Software Upgrade
From this good doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml
Hope this helps!
Rob

Similar Messages

Will there be any data deleted if i upgrade my software version?

will there be any data deleted if i upgrade my software version?

what are you updating? But the short answer is no. whether an iOS device or a Mac you should't "lose" anything. the only problems you might run into are compatibility issues with software not being able to run on newer system software....ie. upgrading to OSX LION means no more PPC apps anymore.

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

Probably a setting. Look at the manual.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

HT4972 Upgrade iPhone software version from 4.3.4 to the latest available

I am trying to upgrade my iPhone software version from 4.3.4 to the latest and keep getting this message whenever I hit <Update> or <Restore>. "The iPhone software update server could not be contacted" - what should I do?

Start by making sure you have disabled any firewall or antivirus programs.

IPhone - Upgrade to Software Version 5.0 - Apple ID Must be an email address

I was prompted to upgrade my iPhone to version 5.0 this morning and did. After some time, a message said that my phone had been restored to factory settings. The next message said that it would restore from a recent back up. It did. The message now says "Restore Completed" but there's a Continue button that asks for some information, including my Apple ID.
My Apple ID is not an email address. It is requiring me sign in with an Apple ID that is an email address. If I put in an email address...will all my purchases from the iTunes store be associated with that Apple ID? How can they be when they are associated with another account? Will I lose access to them? Will I have 2 Apple IDs?
Help.
Thanks.

jcorroon wrote:
If I put in an email address...will all my purchases from the iTunes store be associated with that Apple ID?
No. You cannot, at present, merge Apple ID's.
Will I lose access to them?
No.
Will I have 2 Apple IDs?
Yes.

Is it possible to upgrade the software version of the C40 from TCNC to TC?

Our end user have existing C40 unit which supports TCNC sw and is currently using TCNC6.2.
their HO tried upgrading their unit to TC7.1.4.908e4e9 and it’s successful unfortunately the "missing RK" message appear.
I believe the TCNC is totally different from TC platform.
We also encountered this to other client, wherein the client wanted to upgrade their unit from TCNC to TC; but the difference is that the upgrade is not successful.
Thanks and hoping for your usual assistance.

The TCNC software for Cisco TP is software without encryption availability. Means you cannot make encrypted video conferences. If encryption is allowed in your country you can go to Cisco licensing and ask them to generate for software upgrade keys for TC software.

Upgraded to Software version 4.0, now can't get apps to sync

Last night I was prompted to upgrade and since then it has wiped all the apps off of my ipod touch and no matter what I try nothing will work. Please help. After it syncs it says there was an error and that the apps didn't sync, but on the summary screen it shows a lack of free space as if the apps were there under "other" but the ipod is empty except for music

You're more likely to get people reading your question that can help by posting in the GarageBand 3 forum. This is the GarageBand 1 where very few GB3 users pass through.

Can I upgrade a Software version for 8310?

any thoughts?

That depends. What OS is on the device currently? You can find the latest available for the 8310 here:
http://www.blackberryforums.com/general-8300-series-discussion-curve/153055-latest-os-8310-4-5-0-108...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

How can I upgrade Software version 4.2.1 so that the Wondows Data Execution Prevention does not closr iTunes?

Hi I am trying to add some CD content to my iPod. Windows Data Execution Prevention closes itunes even though I have enanbled the iTunes exception. Is there an upgrade fro software version 4.2.1
which addresses this problem?

Welcome to the discussions,
you will lose your all music you did not buy it in the iTunes Store. The rest can be copied to the new computer by using "transfer purchases" from the File menu in iTunes.
Disable autosync in iTunes on the new computer before you connect, set up your account, authorize in the Store menu and set up at least one contact and event on the new computer, to be able to merge data after your device got erased during the first sync.
After transferring your purchases, back up manually by using "backup" from the same menu.
See what's included in the backup here: http://support.apple.com/kb/HT1766
After your device got wiped during the sync process, restore from that backup again.
It may be useful to create an own user account on the computer, to be sure the content from your ipod will have it's own iTunes library.

Modern firmware and software version not matching

Hi...I upgraded my software version to 5.0.1 and didn't upgrade the baseband. My current baseband is 2.10.04. Would this cause problems? I didn't update the firmware due to turbo issues.
Recently I'm having some problems of 'NO SIM CARD INSTALLED'. Does unmatching of firmware and software version have to do with this ?

your phone is clearly hacked (jailbroken). Not only have you voided your warranty with Apple, but you have forfeited your ability to receive any assistance from Apple, including from this forum. Discussion of jailbroken phones is strictly prohibited by the Terms of Use of this forum.
You'll need to search elsewhere for solutions to your problem. Be prepared for the possibility that you have PERMANENTLY disabled your iPhone.

HT4972 i want to update my software version to 6.1.3. but my c drive runs out of memory and i cannot upgrade it at the end, but having to delete the files and gain more space for the computer to operate... plz help me :(

i want to update my software version to 6.1.3.. but i have never updated this before and this is my first time.. im having 20 GB apps and music in my ipod. so when i click 'update and download' tab it starts downloading the new version and upgrading,... but afetr some time it says im having a very low memory in c drive and i would have to stop the upgrading...
can i use my external hard to save this download and upgrading files without using my c drive? plz give me a solution as im only having only 7GB of space left in the C drive

I would rather you delete/move other files to the external HD rather than downloading the update file to the external HD.
First try going here and delete any update files to regain C drive space.
IPSW file location for Mac and Windows
Also, make sure that you have emptied your computer's recycle bin
You can try the manual update/restore method included here and download the file to the external HD

I have an older iPod Touch, Model MC086LL with an IOS software version of 4.2.1. Many of the applictions which I had previously purchased were recently upgraded and they no longer can be loaded on my iPod. What is the fix?

I have an older iPod Touch, Model MC086LL with an IOS software version of 4.2.1. Many of the applictions which I had previously purchased were recently upgraded and they no longer can be loaded on my iPod. What is the fix?

Reload older versions from iTunes on a computer, or buy a newer device.
(73016)

CUCM 8.5.1 to 8.6.2 Upgrade Software Version license is missing.

We upgraded a demo system which was running CUCM 8.5 to Version 8.6.2 as a dry run before installing our actual 8.6.2 servers and we can no longer register phones. The GUI tells us " Software Version license is missing. Service will not start. Please upload SW Feature license file.
The Licence Unit Report shows 150 Units Authorized and 26 in use for the Phone License Feature - Status shows Demo. It also shows 3 Units Authorized and 1 in use for the CCM Node License Feature - Status also shows "Demo". The Software License Version has no SW Version info and its status shows "MISSING".
We would sure like to be comfortable with the process before diving in head first.
Anyone have any ideas?
Thanks,
Brian

Hi Brian,
It looks like you may be hitting this bug;
CSCtr77210 - Feature demo-license is removed after minor upgrade to 8.6
✓Save To My Bug Watch
Description
Symptom:When doing a minor upgrade to CUCM 8.6 the demo license still works, however the feature demo-license does not work anymore. It shows as "Missing".
Conditions:Minor upgrade to CUCM 8.6
Workaround:
Request new demo licenses
Details
First Found in:
More
Less
Status:
Open
Last Modified:
Apr 02,2012
Known Affected Versions:
More
Less
Fixed in:
More
Less
Product:
Cisco Unified Communications Manager (CallManager)
Platform:
Dependent
Severity:
4 - minor
Cheers!
Rob
"Everything is broken" - Bob Dylan

HT201210 When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid

When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?

Temporarily disable any security software on the computer and try again.

Upgrading Fifth generation iPod to software version 1.2.1

the latest software version for the fifth-gen iPod has been out for a while now, but i havent been able to upgade it because itunes keeps on telling me that "the iPod cannot be updated because it contains files that are in use by another application." can someone tell me why it wont update and what other application is causing it not to update so i can update my iPod. thank you if you can.
Dell Dimension 4100 Windows XP OS was originally Windows ME; iPod version is currently 1.2;

I had that same problem and more; almost sent my ipod back. I also experienced charging problems, freezing, Compatibility problems too many to name. After trying almost everything I did a full install of the new software not the upgrade (that's what messed-up my ipod in the first place)leave the old software on the PC and just download the full "New" version. When you plug the ipod afterwards it should recognize it as an upgrade...don't ask me how that's what did it for me. It also gave me the option to restore the ipod which i did, then it copied all my songs back to my fifth-gen 60g. ipod. Hope this helps. Happy New Year! God Bless!
Dimension E510 Windows XP Pro

Upgrading wlc4402 software version

Similar Messages

Maybe you are looking for