Upgrate from 10.2.0.1.0 to 10.2.0.4.0

I have Windows XP Professional with 10g 10.2.0.0.1. I need to update to 10.2.4.0, but I got errors as below, please help.
Thanks in advance.
C:\Oracle_Patch\8708077>opatch apply
Invoking OPatch 10.2.0.1.0
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : C:\oracle\product\10.2.0\db_1
Central Inventory : n/a
from : C:\oracle\product\10.2.0\Inventory
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : C:\oracle\product\10.2.0\db_1\oui
Log file location : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch-2010_Nov_15_15-23-34-EST_Mon.log
ApplySession applying interim patch '8708077' to OH 'C:\oracle\product\10.2.0\db_1'
Apply Session failed: ApplySession failed to prepare the system. ApplySession: Required component(s) [ oracle.rdbms.rsf, 10.2.0.4.0 ] not present in the Oracle Home or a higher version found.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 73
C:\Oracle_Patch\8708077>

I am not sure what patch sets are, please see below that are what I have. Are they patch sets? Thanks
Directory of C:\Oracle_Patch\8708077
11/15/2010 03:13 PM <DIR> .
11/15/2010 03:13 PM <DIR> ..
11/15/2010 03:13 PM <DIR> custom
07/29/2009 04:35 AM <DIR> etc
07/29/2009 04:35 AM <DIR> files
03/26/2009 06:15 AM 507,648 ocfs.sys.2k
03/26/2009 06:14 AM 487,424 ocfs.sys.2k8
06/02/2008 10:19 AM 10,240 orafencedrv.sys
11/07/2008 03:46 AM 8,704 orafencedrv.sys.2k8
07/28/2009 04:17 AM 2,923 patchmd.xml
07/29/2009 06:06 AM 79,236 README.html
05/15/2008 10:36 PM 37 README.txt

Similar Messages

Upgrating from iPhone 3gs to ios4

Hey I am upgrating from iPhone 3gs to ios4 but I have noticed that the sim card are not the same . I am living in Lebanon middle east theirs isn t any micro sim card by the company but some friends told me that you can cut the old one to fit the ios4 is this true or theirs is another thing I have to do ?
Rami Saba

iOS4 is firmware update 4.0, which will be pre-installed on the iPhone 4 and will be available as a firmware update for the iPhone 3G and 3GS on 6/21.
The iPhone 4 uses a micro-SIM card. I've seen some discussion about cutting a standard size SIM card down to the size of a micro-SIM card to be used with an iPad. If your carrier does not provide a micro-SIM card, they must not be an official carrier for the iPhone and if not, you have no other choice but to cut down a standard size SIM card to the size of a micro-SIM card.

What r problems came related ABAP/4 work, when upgration from lower version

Hi Experts,
can i know information about upgration.
what are problems came in ABAP/4 realated development,when upgration from lower version to higher version.
Best Regards
jai

Hi Jayasunderreddy,
I have gone through an upgradation project, which upgrades from lower version to higher version, there are some problem we could find and here are they:
1) There were some syntax errors for the variables.
sloution) we should relate them with new version variables and change them.
2) There were some FM to be changed according to the version
3) There were change in BDC also if the objects having BDC then we have to check whether it is functioning well or not, or the best way is to replace the BDC with BAPI, which is independent of version change, so further no problems if at all the version changes.
Is this information ok..this is what we did for that.
if you are satisfied then award the points.
Thanks and regards
Vipin Das V

CIN installation on ECC6 SAP system upgrated from 4.6C SAP release

Hi all,
We have a ECC6 SAP system upgrated 4 years ago from a 4.6C SAP release system. In the old SAP release we don't have installed CIN 40A for India localization, and now we need to have this functionalities has we have to do a rollout on SAP for one indian company.
Problem is that we don't have found any OSS note that explain clearly what we have to do to have in our ECC6 SAP system CIN functionalities.
After application of support packages on level 17 (up minimum required by OSS note 1175384) we have launch function j_1bsa_component_check but we have exception that country IN isn't installed.
We can't use transaction O035 as we have a SAP system already customized.
Thanks in advance for any help or useful information someone can do us about this problem.
Sorry if this couldn't be the right forum to post this type of message, but is't difficult for me, in this particular case, to find the right forum for this type of question.
Regards
Gianpaolo
Edited by: Gianpaolo Papa on Oct 22, 2010 9:55 AM

No asnwers

Upgration from 6.5 to XI 3.1 doesn't show up data in report

Hi Expert,
I have a report which was in BO 6.5 version and this is upgraded to XI 3.1.
When i refresh the report after upgration, the report going into structure mode instead result mode. When i try to convert that into result mode, the system is hanging.
How can we rectify this issue ? Any help is highly appriciated.
Regards,
Suresh

Try:
String sqlStmt = ("INSERT INTO custInfo (fName, lName, phoneNumber, custDayCalled, custTimeCalled, custMessage) VALUES ('" + fName + "', '" + lName + "', '" + phNumber + "', '" + dayCalledIn + "', '" + timeCalledIn + "', '" + message.getText() + "')");

Upgrate from CS5.5 to CS6

It's possible? How much does the upgrate cost?

Go to this page: Creative Suite 6. The price for the upgrade is $199.00 US.

Upgrate from jdk 1.3 to jdk 1.4, applet doesn't work anymore

Hello,
I have several applications that work with the default virtual machine that is installed in the browser. When I updated my virtual machine to jdk 1.3 everything was still ok. But when I updated it now to jdk 1.4 several of these applets doens't work anymore. I allways get the message class not found. Does anyone know the reason or a solutions for this.
I know that in the beginnen of jdk 1.4 most of the applets didn't work on 1.4. But that problem was solved.
Thanks for the reply.

I might be having the same problem. Is the class the first one [the applet] or a subsequent one and if so is it in the same directory or a different one?
What does your applet html code look like i.e CODE= ???? CODEBASE= ????
Pete Antoniak

Upgration from Forms 4.5 to 6i

hi,
how to upgrade forms 4.5 to 6i
thanks

Open you forms4.5 Files with forms6i and compile all and save.
Thats it.
HTh.
G|nter

Two finger zoom doen't work afer upgrating from 3.6 to 4rc on my windows 7 pc

i use a windows 7 ultimate pc connected to a dell sx2210t touch monitor. After upgrading to firefox 4rc two finger zoom does not work any more although scrolling works fine

Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in cmd_fullZoomReduce
browser.gesture.pinch.in.shift cmd_fullZoomReset
browser.gesture.pinch.out cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift cmd_fullZoomReset
* http://kb.mozillazine.org/about%3Aconfig

Data Migration from 4.7 to ECC 6.0

Dear Friends,
We are doing upgration from sap4.7 to ECC6.0.
We have activated new gl. We have configured all ecc6.0 functionality.
But we stuck on data migration from classic gl to new gl.
We want to activate the migration cockpit but system is asking license key.
My question is, which license key it is?
From where we will get this?
Kindly don't send me any links and any documents related to ecc6 functionality.
Please guide us on this.
Thanks & Regards,
Reva Naik

Hi,
following link may give you some hints:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/9e4638a28b2763e10000009b38f8cf/frameset.htm
Regards
Bernd

Routines Migration from 3.5 to 7.0

Is it mandatory to convert ABAP routines to ABAP objects while upgration from 3.5 to 7.0. As we have huge numbers of routines written in the update and trasfer rule. PLease suggest.
amit
9766392606

Is it mandatory to convert ABAP routines to ABAP objects while upgration from 3.5 to 7.0. As we have huge numbers of routines written in the update and trasfer rule. PLease suggest.
7.0 migration from 3.X :
You neednot migrate your routines separately.
All your old routines will be put into a global perform and will execute normally.
Exception : Return tables(not supported in BI 7.0).
3.X :
If your flow is 3.X, no need to migrate at all.If old flow is desirable.

Upgrading from F3.0.F to F.3.0.G

We at CSI are moving to F3.0.G. Is any compatibility issues to take into
account ( apart Conductor ) when upgrating from 3.0.F ?
In particular our developopment environment consists of 2 Central Repos
Server and about 80 development clients. Do you think it is possible to
upgrade server first, let 3.0.F client interoperate with 3.0.G servers, and
then progressively upgrading clients ?
Is it right to apply the same policy to the production environment ?
Thanks in advance
Fabrizio
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Fabrizio,
Be aware that there was some SERIALIZATION error introduced in Forte
3.0.G.2 from Forte 3.0.F.?. We were forced to upgrade all the client
because the runtime client(3.0.F.?) did not work with server Forte
3.0.G.2. Please test all you application out before you upgrade the
servers. I recommend not keeping the two at different versions(Forte
3.0.G.2 on server and runtime Forte 3.0.F.? on the client).
ka
Kamran Amin
Forte Technical Leader, Software Engineering
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From: Fabrizio Barbero[SMTP:[email protected]]
Sent: Tuesday, June 23, 1998 2:39 AM
To: [email protected]
Subject: Upgrading from F3.0.F to F.3.0.G
We at CSI are moving to F3.0.G. Is any compatibility issues to take into
account ( apart Conductor ) when upgrating from 3.0.F ?
In particular our developopment environment consists of 2 Central Repos
Server and about 80 development clients. Do you think it is possible to
upgrade server first, let 3.0.F client interoperate with 3.0.G servers, and
then progressively upgrading clients ?
Is it right to apply the same policy to the production environment ?
Thanks in advance
Fabrizio
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Upgrading from Robohelp 6 to Robohelp 10

Hi,
I have been working on Robohelp 6 HTML to create a huge online help both CHM and Webhelp (Windows 7 and Office 2010). Now my company is planning to upgrade to Robohelp version 10.
1. I want to know the impact it will have on my existing Robohelp 6 files.
2. What points should I keep in mind before saying yes to such an upgrade?
3. Has any problems been reported as yet after opening the Robohelp 6 files in Robohelp 10?
4. Can I directly upgrade from Robohelp 6 to Robohelp 10?
Would really appreciate some help on this. I don't want to recommend something which might end up causing problems for me.
Thanks

Hi
I upgrated from version 7 to 9 about a year ago and it was only possible using RH 8.
My project - created in RH 7 - was pretty messed up when I tried to upgrade directly from RH 7 to RH 9.
I known this answer doesn't solve your problem but it's just a little info about what to expect if you try to jump over 3 versions.
Ulrik

Mavericks installation gave me an error message, I had to erase my HHD and now I don't have my iPhoto, iWeb, and other programs from iLife

I used to have iPhoto and iWeb, which I used constantly and now that I've installed the new software they are nowhere to be found. I looked for the programs in the App Store but they are charging for them.
Please, it's enough that I had to erase all my data from the HD and lost many of my files while doing it because the Mavericks update gave me a error message while installing.
I upgrated from Mountain Lion.
I have an iMac.
Thanks.

I didn't have the applications backed-up... I was not expecting to lose them over an OS upgrade either... yeah, I know, it felt like a once-in-a-life-time experience when I encountered the message (or FATAL ERROR in windows terms).
I don't know where my original installation disc is, I have kids... I no longer have control over where stuff is anymore, especially a disc thingy LOL
Anyway... I lost my iMovie, iWeb, iPhoto... BTW iWeb is not even for sale on the app store anymore.
Apple... really?

Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AM

HI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya

Upgrate from 10.2.0.1.0 to 10.2.0.4.0

Similar Messages

Maybe you are looking for