UPK creation issues (Firefox 3.6.1, Oracle R12 (12.1.3), HP-UNIX)

Hi, our organization is testing the following software upgrades:
- Oracle R12 (from 11)
- For HRMS, replacing IE 6 with Firefox 3.6.1
Based on an email from one of our clients:
- Trouble recording UPK in HRMS R12 with Firefox (works fine in R12 with IE6)
- Example - did not register the field being clicked on
- Some system prompts did not generate
- System generated prompts not appearing in Topic Editor
- When you publish or preview the UPK, the default prompt to enter characters is typo-ridden and says:
-- "Entera valid valuee.g."Training Supplier 1."
- Strangely, when copied-and-pasted, the typos disappeared.
- And within the Topic Editor, the typos are also absent. They only seem to appear when actually using the UPK.
Any tips would be much appreciated! Let me know if more detail needed.
Thanks
Bill

Hi Bill,
What build of UPK is being used - 3.6.1?
Have you applied any applicable Service Enablement Packs - specifically for versions 3.6.1 (SP3 available) and 11(SP1 available)?
I had a similar issue although it was with R11 and applying SP3 on UPK 3.6.1 sorted out all of my Firefox issues.
I hope this helps somewhat.
Regards,
Greig

Similar Messages

Performance Issue with PAY_BALANCE_VALUES_V View in Oracle R12

Dear all ,
We have recently upgraded from 11i(11.5.10.2) to R12(12.1.3). We are facing one Issue with slow performance of the queries where PAY_BALANCE_VALUES_V is used. We have so many reports & logic in Payroll which uses this View.
In 11i this works fine, however in R12 it takes very long time. There are no configuration changes we have done from 11i to R12.
Is there any way to optimize the performance or alternate way to retrieve the Balances Data in Payroll ?
Any heads up would be highly Appreciated.
Thanks,
Razi

Hi Razi,
The balance related performance issue is written in the following note.
Note:1494344.1 UK Payslip Generation - Self Service Program Takes Much Time To Complete (Performance Issue)
This issue was fixed in HR_PF.B RUP6 or patch:14376786. Did you apply this patch? If not, I suggest you apply it.
Also, HR_PF.B RUP6 has some balance related performance issues.
If you already have applied HR_PF.B RUP6, I suggest you log a SR with SQL trace.
Thanks,
Hideki

Session creation issues with DS3.2

We are using BODS 3.2 for development. We are aware that a newer version of DS has been released quite a long time ago but due to some reasons we are still using DS 3.2.
We are facing some session creation issues. We are using Teradata and Oracle as source and extracting\updating data using some SQLs in script tasks. SQLs are targeting huge amount of data. We executed a job and checked on the servers, sessions were created on the databases. Job kept on executing for long time and was not getting completed, there was no error also. After waiting so long, I checked on Database server and found that session was lost for these SQLs on Database servers. We are able to create a successful connection using Data Stores.
Please suggest something, Why the sessions are not getting lost on the database servers?.
Thanks & Regards,
Gaurav Bansal

ginger_11 wrote:
Hi...I'm new to the forum.
2 of the same phones in my household having similar issues since OS upgrade.
-Text automatically going to MMS when sending pics and the pics won't send. 1 phone freezes, the other acts like its sent but not sent-this phone won't load emailed pics either.
-Keep getting notifications that passwords need updated for email accounts.
-Facebook app won't load on 1 phone-tried deleting, pulling battery and re-installing. Still getting "session re log-in required" but there is nowhere to load the log-in info under accounts. Getting the same message on the other phone but the app is still listed under accounts so am able to log in.
-Both phones are randomly re-starting. Multiple times over past 3 days.
Any known issues like these?
There must be some common factor why both phones are having the same problem.
With the 10.2.1.537, the only problem I had was a few contacts merged and surnames were repeated.
I haven't noticed any difference with the latest upgrade.
Maybe a security wipe and restore contacts and email then one app at a time.

Compatible issues firefox v37.0.2 with att yahoo mail

6:43 PM 4/24/2015
Compatible issues firefox v37.0.2 with att yahoo mail
Hello: this is my first post,hope I am doing it properly.
I am using W7pro OS and ATT DSL 3.0Mbps dl
I noticed this week that I was unable to save attachments from my ATT Yahoo mail I could view them but no choice as to ware to save them--only choice (save to my comp.)But no ware to be found.
I reinstalled v 36.0.4-preventing auto upgrade-But still had same problem.
At this point contacted ATT support supervisor-we spent about 4hr working on problem--He was using your v 31.5.0--and had no problem accessing and saving attachments using remolt access on my comp.
We also found using my comp.FF v 36.0.4 & v 37.0.2 browser,that we could without any problems access an save attachments--AOL mail-- & mail2web.--& IE--Even when forwarding inaccessible mail to above sites.
He informed me that (ATT mail Yahoo)only uses resources to make them compatible with--Google IE & Chrome &Apple? (basically he was saying,that they would NOT commit resources to FF--any version)BUT he was not allowed to commit.
PS: The last time I know it worked ok was 3-18-15 I have 3 comp.2 wxp pro 1 w7 pro the same problem on all 3--so feel confident not OS related-but compatible problems with FF & yahoo mail.
The ATT support supervisor-was unable to determined the date they may have made changes on their site.without extensive research-which we decided wasn't worth the effort as they wouldn't look in to it.
I hope someone or FF will be able find a workaround-as I do not want to use the browsers they suggest. I LOVE FF.
Thank You Gary

I have no idea what you are asking me to do ??--can you explain at a dummy
level--I wont be offended.
gary

Urgent :- Issue with deploying application in Oracle Application server

Hello All,
Hope all of you are doing good ! I am facing an issue relating to deploying applications using the Enterprise manager. When i deploy the war file using Deploy WAR file option in the OEM, i get the following error -
Failed to deploy web application "gCube". Failed to deploy web application "gCube". . The configuration files for this OracleAS 10G instance are inconsistent with the
configuration stored in the repository. In order to protect the repository,
no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. The exception associated with this failed operation is:
{0}
. Please also check the logs located at
ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
the configuration files on disk. Some possible causes are:
* permissions on files
* file contention issues on Windows NT
* internal Oracle error
After resolving the problem that prevented DCM from updating the configuration
files, you may use the dcmctl resyncInstance command to resolve the problem.
Alternatively, you can stop and then restart the active dcmctl or EMD
process and resyncInstance will automatically be performed.
Root Cause: invalid stream header
Resolution: . invalid stream header
Please could you throw some light on this issue and also provide a resolution to fix this issue at the earliest ?
Your help in this , will be greatly appreciated.
Thanks and Regards,
Ramanan.

Hello All,
Could anyone assist me with a fix for the problem ?
Would appreciate it greatly.
Thanks.

10.6.7 - general pdf creation issues?

I wondered whether anyone else had run into this issue after updating to 10.6.7 when using pdfs created by Preview - perhaps related to the pdf/font issue.
If it is generally happening, then the 10.6.7 pdf-font issue has an even larger
impact than previously described:
1. Open a pdf document in Preview
2. Select a region and save to clipboard
3. Save as a new pdf file
4. Then try importing it as a "Picture" into any of the new Office 2011 apps: Word, PPT, etc.
This crashes my office 2011 apps (latest version, 14.02) But NOT any earlier version of Office (2008. etc.), which may not do as much pdf checking.
Before the 10.6.7 upgrade (ie, 10.6.6), this never happened with Office 2011.
Acrobat complains when opening the Preview-created pdfs about 'missing fonts', so I suspect some sort of pdf creation issue.
Any fixes (besides the previously suggested one of downgrading to 10.6.6)
If it's a real bug (not just local to my system), then it's a more far-reaching one than previously described.

rcberwick wrote:
So, 3 different Apple tech support people say they know this problem affects
"multiple applications, including any that deal with pdf files" but that "no fix is
currently in the works"
That is wrong because it only involves OpenType Postscript fonts.
The only solution offered so far is to "downgrade by doing Archive & Install" and
then re-applying each Combo Upgrade, starting with 10.6.3 up to 10.6.6.
You wouldn't have to do that either. That is the point of a Combo update. You only need to apply the one you want. It includes all of the previous updates.

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..
I am getting below error when i m trying to access oracle db using oracle 11g client. It works with earlier oracle client versions. how do i resolve this. is there any issue with version of ojdbc6.jar that i am using??? I cant use thin driver since its an old application for which i dont have source files.
Apr 6, 2013 1:00:59 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.UnsatisfiedLinkError: no ocijdbc9 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:262)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at PettyCash.SysDate.getSysSubSys(SysDate.java:232)
at org.apache.jsp.PettyCash.index_jsp._jspService(org.apache.jsp.PettyCash.index_jsp:186)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Code is as follow for reference
import oracle.jdbc.driver.*;
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
conn = DriverManager.getConnection ("jdbc:oracle:oci8:@" + database,db_user, db_pass);
eNVIRONMENT VARIABLES set are as follows:
classpath
C:\Program Files\apache-tomcat-5.5.12\common\lib\servlet-api.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\classes12.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\ojdbc6.jar;
JAVA_HOME
C:\Program Files\Java\jdk1.5.0_04
PATH
C:\Program Files\Java\jdk1.5.0_04\bin
ORACLE_HOME
D:\Oracle11\product\11.2.0\client_1\BIN

Apr 8, 2013 5:24:06 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.NullPointerException
     at org.apache.jsp.abc.index_jsp._jspService(org.apache.jsp.abc.index_jsp:280)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:432)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:868)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:663)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)

Performance issue with Crystal when upgrading Oracle to 11g

Dear,
I am facing performance issue in crystal report and oracle 11g as below:
In ther report server, I have created a ODBC for connect to another Oracle 11g server. also in report server I have created and published a folder to content all of my crystal report. These report can connect to oracle 11g server via ODBC.
and I have a tomcat server to run my application in my application I refer to report folder in report server.
This way can work with SQL server and oracle 9 or 10g but it facing performance issue in oracle 11g.
please let me know the root cause.
Notes: report server, tomcate server are win 32bit, but oracle is in win 64bit, and i have upgraded DataDirect connect ODBC version 6.1 but the issue can not resolve.
Please help me to solve it.
Thanks so much,
Anh

Hi Anh,
Use a third party ODBC test tool now. SQL Plus will be using the Native Oracle client so you can't compare performance.
Download our old tool called SQLCON: https://smpdl.sap-ag.de/~sapidp/012002523100006252882008E/sqlcon32.zip
Connect and then click on the SQL tab and paste in the SQL from the report and time that test.
I believe the issue is because the Oracle client is 64 bit, you should install the 32 bit Oracle Client. If using the 64 bit client then the client must thunk ( convert 64 bit data to 32 bit data format ) which is going to take more time.
If you can use OLE DB or using the Oracle Server driver ( native driver ) should be faster. ODBC puts another layer on top of the Oracle client so it too takes time to communicate between the layers.
Thank you
Don

I want to know when we issue truncate table statement in oracle .

i want to know when we issue truncate table statement in oracle .No log will be write in redo log .But we can recover data using flashback or scn.I want to know where is the actually truncate table statement log is stored in oracle database.Please explain me in detail step by step .

Hi,
I have truncated table after that i have restored that data.See below the example.I want to know from where it's restored.
From which log file it's restored.
create table mytab (n number, x varchar2(90), d date);
alter table mytab enable row movement;
Table altered.
SQL> insert into mytab values (1,'Monsters of Folk',sysdate);
1 row created.
SQL> insert into mytab values (2,'The Frames',sysdate-1/24);
1 row created.
SQL> commit;
Commit complete.
SQL> select CURRENT_SCN from v$database;
CURRENT_SCN
972383
SQL> select * from mytab;
N
X
D
1
Monsters of Folk
30-DEC-12
2
The Frames
30-DEC-12
N
X
D
SQL> set lines 10000
SQL> /
N X D
1 Monsters of Folk 30-DEC-12
2 The Frames 30-DEC-12
SQL> select to_char(sysdate,'yyyymmdd hh24:mi:ss') from dual;
TO_CHAR(SYSDATE,'
20121230 09:29:24
SQL> set timing on
SQL> truncate table mytab;
Table truncated.
Elapsed: 00:00:15.75
SQL> select * from mytab as of timestamp TO_TIMESTAMP('20121230 09:29:24','yyyymmdd hh24:mi:ss');
N X D
1 Monsters of Folk 30-DEC-12
2 The Frames 30-DEC-12
Elapsed: 00:00:00.28
SQL> insert into mytab select * from mytab as of timestamp TO_TIMESTAMP('20121230 09:29:24','yyyymmdd hh24:mi:ss');
2 rows created.
Elapsed: 00:00:00.01
SQL>

Issue to install mhVTL on Oracle Linux 5.9

Hi Everyone
I'm dealing with an issue to install mhVTL on Oracle Linux 5.9, my current operating system. My goal is to install Oracle Secure Backup once that mhVTL is running.
According to the the link https://sites.google.com/site/linuxvtl2, I have followd this steps:
1.- rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
2.- rpm -Uvh http://www.elrepo.org/elrepo-release-5-4.el5.elrepo.noarch.rpm
3.- rpm -Uhv http://dl.atrpms.net/el5-x86_64/atrpms/stable/atrpms-repo-5-6.el5.x86_64.rpm
* NOTE: By default, the liblzo2_2 is not installed and my box doesn't have a repository to find it. For this reason I have installed this rpm file that let my box access a repository with the liblzo2_2 lib
4.- yum yum install liblzo2_2
5. sudo yum install mhvtl-utils kmod-mhvtl
After running all this steps, I get the following message if I perform /etc/init.d/mhvtl start:
/etc/init.d/mhvtl start
FATAL: Module mhvtl not found.
No kernel module loaded to feed these daemons.
Need mhvtl kernel module version at least 0.18.11
Did you remember to compile the 'mhvtl' kernel module ?
Please see http://sites.google.com/site/linuxvtl2/
According to this message, I understand, that I haven't install the kernel, so I have downloaded and uncompressed the mhvtl-2013-10-20.tgz file but with no success
1. tar xvzf mhvtl-2013-10-20
2. mhvtl-1.4
3. cd kernel
4. # make
Output:
make -C /lib/modules/2.6.39-400.211.3.el5uek/build SUBDIRS=/tmp/mhvtl-1.4/kernel modules
make: *** /lib/modules/2.6.39-400.211.3.el5uek/build: No such file or directory. Stop.
make: *** [default] Error 2
does someone have a tip to help me with this issue?
Thank you in advance

If the problem is only to install Xvfb, you can do that doing the following:
# yum list "*xvfb*"
Available Packages
xorg-x11-server-Xvfb.x86_64 1.15.0-22.el6 public_ol6_latest
# yum install xorg-x11-server-Xvfb

[svn] 4910: Implementing workaround for history manager rendering issue ( Firefox/Mac) caused by a long standing player bug.

Revision: 4910
Author: [email protected]
Date: 2009-02-10 11:51:58 -0800 (Tue, 10 Feb 2009)
Log Message:
Implementing workaround for history manager rendering issue (Firefox/Mac) caused by a long standing player bug.
Bugs: SDK-17020.
QE Notes: None
Doc Notes: None
Reviewer: Alex
Tests: DeepLinking
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17020
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/managers/BrowserManagerImpl.as
flex/sdk/branches/3.x/templates/html-templates/client-side-detection-with-history/history /history.js
flex/sdk/branches/3.x/templates/html-templates/express-installation-with-history/history/ history.js
flex/sdk/branches/3.x/templates/html-templates/no-player-detection-with-history/history/h istory.js

How to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer.
I downloaded Oracle Linux 5.6 Media Pack for x86_64 (file name V24479-01) from https://edelivery.oracle.com/linux.
I have installed OEL 5.6 for VM rac1 and done the follows:
1) install rpm and oracleasm packages for rac1.
2) edit /etc/hosts to set up IP addresses for eth0 and eth1 for rac1 and rac2.
3) edit eth0 and eth1 for rac1 by using command [root@rac1 \]# neat
But when boot the OS, I see "initializing Oracle ASMLib driver: FAILED".
When configure Oracle ASM library driver by running the command:
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: FAILED"
I think the reason is the OS cannot initialize Oracle ASMLib driver. My question is:
Do any folk understand how to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?
Thanks.

Folks,
Hello. Thanks a lot for replying. OEL 5.6 comes with 2 kernels: uek and red hat
I have chosen to use red hat kernel for 64-bit. I run the following command:
[root@rac1 /]# uname -rm
Output: 2.6.18-238.el5x86_64
I have downloaded 4 files for this version of kernel from
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html as below:
oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-debuginfo-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
I have installed the 4 files and got the error messages for the first 2 files as below:
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-xen=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-debug=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
The last 2 files have been installed successfully. But when reboot Oracle Linux Server-Base 2.6.18-238.el5, I still see :
"Initializing ASMLib driver: FAILED."
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: OK "
My questions are:
Does the issue OS "Initializing Oracle ASMLib driver: FAILED" have effect later ? Do we need to solve it ?
Thanks.

Site Creation Issue.

We had a user report a site creation issue with their site. They had been able to create sites with no problem up to this point. But now, when attempting to crate a site they get an error "User can't be found". But if they create a blank site
I or a blank team workspace. The site creates without incident. Any idea? The permissions appear to be correct but they can't create anything but blank sites without receiving the error. Maybe check permissions to webparts and templates (Do you know where
I could do that)?

Hi,
Did you mean create site collections in the CA?
Did the users have admin permission or other permission? You can use the admin account to check whether it works.
To narrow down the issue, you can use other web application to check whether it works.
Maybe the web application had been corrupted.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Installing Oracle R12 Express Installation

Dear All,
Is it possible to install Oracle R12 Express Installation on Windows XP SP2 which is on a WorkGroup and not a part of Domain.
How to convert the Workgroup into Domain. Please Guide.
Regards
Hitesh Parsawala

Hi Hitesh;
Please follow Hussein Sawwan's greatest post about same issue, you can find installation steps&pre-request etc
Oracle r12 installation on Windows XP
Oracle E-Business Suite R12 Installation Steps on Windows XP
Hope it helps
Regard
Helios

Printing Checks from Oracle r12

I'm not too sure on where I should have put this post because I really don't know anything about Oracle. In my company I handle Server and PC maintenance mainly. The only thing I do with Oracle is I have to run a report every morning. The people in the positions that would usually handle what I need to get done are extremely busy right now and they have asked me to do research on this issue.
We are currently in the middle of upgrading to Oracle r12 and running 11i right now. The current check printing we have won't work with r12 from what I hear. Do I have to use a third party program to print the checks from Oracle or is this something we could code ourselves? Sorry if this doesn't make since to anyone, please reply and I will try to explain as well as I can... remember... I only know how to run this one report in Oracle.
Thanks in advance for any help or advice anyone can give me.

Hi,
We are currently in the middle of upgrading to Oracle r12 and running 11i right now. The current check printing we have won't work with r12 from what I hear. Why? What is the reason? Can you print it in Apps11i?
Do I have to use a third party program to print the checks from Oracle or is this something we could code ourselves? Sorry if this doesn't make since to anyone, please reply and I will try to explain as well as I can... remember... I only know how to run this one report in Oracle. You do not need to use third party software, if you have a printer configured in the application, and you register you custom report (the check report) properly, then you should be able to print from the application.
You may also review the following documents.
Note: 312353.1 - Check Printing Using XML Publisher
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=312353.1
Note: 110406.1 - Check Printing Frequently Asked Questions
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=110406.1
Note: 459306.1 - XML Checkwriter/Deposit Advice
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=459306.1
Regards,
Hussein

UPK creation issues (Firefox 3.6.1, Oracle R12 (12.1.3), HP-UNIX)

Similar Messages

Maybe you are looking for