UPK Player Play Back Modes

After publishing Player files, I want to preview the Player output so I launched player.exe. It opens in Internet Explorer, and I can see and expand the modules and view the topic listing. However, I cannot see the Concept pages. All I get is a blank page. I also don't get the playback mode buttons, so I can't launch any topics. Double-clicking does not launch my default mode (Try It) either.
If I open the content by openning the KP file everything works fine it appears that this is specific to play.exe
Note: This question was posted once already but there has not been a response.

Hi There,
It could be a number of things - I experienced something very similar on UPK 3.6.1 a short while ago, and after applying the Service Enablement Pack 3, everything just sprang to life! I am not too sure what version of UPK you are using, but ensure that the compatibilities between the browser and your version of UPK (including any service packs) are in line. You can download any of the enablement packs on edelivery.
Have you attempted to launch play.exe in a different browser? Does it do the same thing? If this is not the case, then you can localise the issue to the browser itself; for instance, you may have 'zoomed in' on the browser, and the player can no longer function correctly unless you 'zoom out' again. You can achieve zooming in and out of a browser by holding down the CTRL key and using the wheel of your mouse to zoom in or out as required.
Also be aware of the screen resolution that the content was recorded on - if it is the same or similar to yours, it shouldn't be an issue, but there are cases where content is created on devlopers that have a much higher resolution, and then users with lower resolutions cannot view that content online (this is assuming that you are working on a multi-user environment, or whether you have imported external content into your developer client).
I hope that helps a bit.
Regards,
Greig

Similar Messages

Why is Flash Player play back poor now?

Flash Player has been poor for me lately under Snow Leopard. Video intermittantly skips on all playbacks (audio is fine), including on YouTube. All system updates applied. I even used Combo udpaters when available. FlashPlayer is updated. Emptied caches etc using AppleJack. Even used DiskWarrior. Everything is working fine but FlashPlayer. Same problem under all browsers. (iMac Intel, 2 GB RAM, 2.0 GHZ)
Interestingly, on the same machine using web browser in WindowsXP (under Parallels) that Flash is working fine.

As stated in my post, Flash Player is working fine in my WindowsXP emulation of Parallels 7 on the same machine with only part of my iMac's RAM assigned to it. What is wrong with this picture?
What's "wrong" IMO is that windows allocates resources and/or prioritizes processes differently than OSX. Yes, OSX may be underlying Parallels but I don't know how Parallels works with respect to accessing OSX resources and prioritizing it's processes within OSX.

Hi Def video is jumpy and will not play back smoothly in FCPX

I have the latest version of Final Cut Pro X only an older, but fully compatible IMac, and have a new Panasonic AG-Hmc 40P video camera. I have shot video on my Gro Prop Hero 2 and the playback of the unedited video is perfect, but as I scroll through the unedited footage shoot by the Panasonic, the video is jumpy and will not play back smoothly. The video plays perfectly on the the camera in play back mode, but in FCPX it is junk.
Do I have an incorrect setting that is doing this? I adjusted the palynack in preference but that made no difference. I need help?

FYI...
There's a hidden feature in Mac OS X Lion that you can use to convert your video footage to Apple ProRes with very little effort and to the right specifications...
Bring your video footage into your desktop or hard drive and then select all of them, and then right-right click on one of them to bring up the options menu... select ENCODE SELECTED VIDEO FILES. Mac OS X will take care of the rest for you automatically.
If this option doesn't show up, make sure to install those codecs I recommendad earlier...
ProApps QuickTime Codecs v1.0.1
http://support.apple.com/kb/DL1396

DVD freeze when play back on dvd player

Hello,
I create a DVD with DVD SP 3.01, When I play back the dvd in 3 brand of dvd player it freeze after 12 min of playback for about 2 sec and after continue to play to go to an other freeze about 10 to 12 min after. It does that in dvd with 25 min and more. If I do a small dvd of 10 min I see no freeze. I ckeck the MPEG2 file made by FCP and there is no freeze inside of it. I also put the QT directly in DVD sp ( encode it before burn ) and I have the same problem. Any idea...
thanks

It may be the brand of disc. Try Verbatim DVD-R or Verbatim DVD+R DL.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally. i have an iPhone 5. I think this happened sometime after the last upgrade but I am not sure when. is there a setting on the phone that may have gotten changed somehow?

Slide your finger up from the bottom of the screen to reveal the Controls panel. One button controls orientation lock to prevent the screen rotating as you rotate the phone. You can toggle that control on and off as you need. Slide the panel back down when you are finished with it.

Not playing back in DVD player

Hello all,
I made a DVD in DVD Studio Pro, and it played back perfectly in the DVD player on my mac. Then I went to play it in 2 other DVD players, and it wouldn't recognize the media. I also couldn't play it on a PC player. I have no idea why. Any input is greatly appreciated.

You can find your files by looking at it's rendering list. There will be a little magnifying glass next to the file name, click on it and the browser will open revealing the file for you.
Actually DVD SP makes fine HD DVDs, you just can't play them much of anywhere. Compressor will make Blu-Ray DVDs in a couple of different ways, some of which are very limited but will work. You can get more extensive menuing by creating the Blu-Ray media in Compressor and using Encore, if you have it, to author the disc. But these methods are not as comprehensive as many of the other applications out there for BR authoring.

HELP!How to create HD disc that will play back in HD DVD or Blu-Ray player?

Footage comes from Panasonic HVX200 as DVCPRO HD 1080i60, all appropriate settings made in FCP5 to edit. Have already made SD DVD, whoopie.
Now client is interested in real HD version that they can play back on HD DVD or Blu-Ray set top unit. Of all my research, I've discovered little about how to make a "real" HD video disc. OSX doesn't support Blu-Ray burning, OK. What about HD DVD burning support? And what drive to purchase for this application?
I understand DVD Studio will allow me to author a disc with HD content...that I can burn onto DVD5. Useless to the client. Need to burn on either Blu-Ray or HD DVD media.
Aside from encoding in Compressor, what do I do when I need to make this HD disc happen? Compressor step seems easy enough to figure out. Just very unclear on how to burn out appropriate video disc.
Thanks for your help.

For Blu-Ray creation:
I'm curious if DVDit! works in parallels too, though it will certainly work in BootCamp. The question is what format should FCP/Compressor output to in order for DVDIt, etc. on BC or Parallels need in order to create the disc?
MPEG-2 and H.264 should work, but who knows?
In the meantime, I have HDV source footage that I edit. I print the final edit back to HDV for archiving, and burn a HD-DVD on a DL DVD+R red laser disc to show on my Toshiba HD-DVD player using DVDSP. It works, and I can get about 40 minutes of MPEG-2/HDV on there without transcoding at 1080i and it looks fantastic.
In the future, I hope to be able to dump the HDV final edit onto a Blu-Ray disc. I'm guessing Adobe Encore will be needed on the Mac for that.
The point here is there certainly are options that work. I do wish Apple added Blu-Ray burning capability.
There's still room for that, however... FCS 1 (and even now 2, with AVCHD support, albeit non-native) have histories of adding new support for codecs, etc. in free updates.

HT3775 Can someone direct me as to how I check whether I have the media formats and codecs that QuickTime Player can play back using my Mac Pro?

I'm trying to use quicktime on my macbook pro but I receive the message below when I make an attemp to use it. Any suggestions?
Media formats supported by QuickTime Player
QuickTime Player natively supports the following media formats and codec components. You can also extend QuickTime to support additional codecs and components.
Below are the media formats and codecs that QuickTime Player can play back in Mac OS X v10.6.x or later:

More alternatives to Quicktime. VLC is recommended a lot.
Video Player - Divx
Video Player – Flip4Mac
Video Player - VLC

How do i change my quicktime player default back to quicktime 7 as my new quicktime won't play certain formats

how do i change my quicktime player default back to quicktime 7 as my new quicktime won't play certain formats

Select one of those files, CMD+I, select QT 7 from the Open With list, and then click the Change All button. Repeat for any in the format class you want to change.

Why does my Flash Player keep freezing during video play back?

I have the very lastest version for Windows 7 64bit OS and it keeps freezing during video play back. The previous versions did not do this. I have to keep the cursor moving inside the video window to prevent the player freezing. I have deslected HARDWARE ACCELERATION and it does not help. Why is this happening and how do I correct this situation?

Right click ANY Flash content and choose "Setings".
Click the folder icon (center tab) and increase the storage to at least 10Mb.

DVD won't play back in bluray player

I just created a DVD in DVD SP, about 5 mins long with audio. It plays back beautifully on the computer, but my sony bluray player doesn't recognize it at all. I haven't tried on a standard DVD player, but I don't see how that would help. A previously made DVD plays fine on the player. Any thoughts?
Thanks
Shelley

Dear Shawn,
Still no good. In a render last night, weirdly, even in my Mac the disk was unreadable and the warning said it was blank, but I rendered again and it works fine on the Mac. But on my SONY player, nothing.
I changed DVD SP to standard in the Preferences and re-created the project from scratch. I used the DVD: Best Quality 90 minutes setting with no changes. Here is the breakdown:
Name: MPEG-2 6.2Mbps 2-pass
Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated size: 2.79 GB/hour of source
Type: MPEG-2 video elementary stream
          Usage:SD DVD
Video Encoder
          Format: M2V
          Width and Height: Automatic
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Start timecode from source
          Aspect ratio: Automatic
                    Selected 16:9
          Field dominance: Automatic
          Average bit rate: 6.2 (Mbps)
          2 Pass VBR enabled
                    Maximum bit rate: 7.7 (Mbps)
          High quality
          Best motion estimation
          Closed GOP Size: 1/2 second, Structure: IBBP
          DVD Studio Pro meta-data enabled
I am at my wits' end. I have two weeks to get this done for a memorial for my late father so you see my desperation.
Do you have any possibilities left? I'd go ahead and sign up for the Pro classes at the Apple Store, but in NYC I'm afraid I wouldn't even get to see anyone in time for FCP and its suite.
Thank you for any advice.
Shelley

Disc I Made With iDVD Will Not Play Back in DVD Player

I used iDVD to burn DVDs I made with iMovie. The DVDs play back without problem on my home DVD player, but when I try to play them on my Mac G5, the computer keeps ejecting the discs. How can this be? Sureley the discs are compatible with my system or they would not be burnable. Please help!

Hi r
No this is an often described problem.
To make a DVD playable to as many devices as possibly there are some alt ways
to go,.
1. From iMovie to iDVD: I don't use the Share/Export to iDVD from within iMovie.
I drop my movie project icon (with a Star on it) into the open window in iDVD.
2. After done necessary adjustments I go to File/Save as a Disk Image.
3. This disk image I burn with Roxio Toast™ but You can also use Apple Disk Util tool.
4. AT AN AS SLOW speed as possibly eg x1, x2 or x4 => Less errors in burn process.
5. I use Verbatim DVD-R. There are other High Quality brands - this I use.
DVD+R or +/- RW I don't use !!
This DVD should play on nearly all devices.
Yours Bengt W

Subtitles won't play back off disk image or DVD player.

Hello,
I am running into problems seeing the sole subtitle track that I have thru a TV DVD Player or a burned disk image. All is fine in DVD SP's Simulator. So the bottom line is that I am doing something wrong, heh?
My set-up is very straight forward: one main menu page, from which I have a "Subtitle Yes No" set of buttons to respectively enable/disable the subtitle track. The "Yes"/"No" buttons enable/disable the subtitle track by checking/unchecking the "View" box of the Button Inspector as described in the first part of this article: http://www.kenstone.net/fcphomepage/dvd_sp2subtitles.html
Furthermore, other menu pages are accessed, playing back media from a single track with numerous chapters in it, and stories made out of that track. I was hoping I could refrain from needing to duplicate all stories, e.g. One set of stories with the subtitling track enabled, the other set disabled, but it seems like this is the way to go to make it work.
Is there another approach to this? I am rather new to DVD SP and am not familiar with Scripts - would a script help this out?
Thanks in advance for any help you could provide...
Cheers,
Alain
MacBook Pro 2.16GHz Intel Core Duo Mac OS X (10.4.8) 2 GB Memory

OK so I've answered my own question, thought I'd post it here if ever this can help someone else...
Duplicating menus and stories toggling on/off the "View" checkbox of my subtitle stream did not work, which is a good thing in a way because it was an ugly scene to work with.
I guess I was impressed by the "Script" term and refrained from using it, but it turns out to be very easy and simple to use... On my "Subtitle - Yes" button, I targetted a 2-liner script that enables "SPRM 2" (the "Subpicture Stream") with the "On" value of 64 for Stream 1. On my Subtitle - No button, I targetted another 2-liner script that disables "SPRM 2" by assigning it a value of 0.
I find the DVDSP documentation on scripting a little lame though, I guess I would have liked some more examples to help the scripting "science" sink in...
Cheers,
Alain

Record audio clip and play back it into media player

how can i record voice clip using java application and play back it with media player.

870902 wrote:
how can i record voice clip using java application and play back it with media player.1) Record from "javasound://0" using a Processor / DataSink
2) Play back the file from 1 using a Player

Help! DVD is pixelating when played back on household player

Help please! This is driving me mad...
I searched the archives but couldn't find the answer, and if I don't finish this wedding video by Monday my mate is gonna litterally string me up!
I've cut the project in Final Cut Pro HD 4.5 - exported as a quicktime file and I'm rying to burn it onto DVD using a Lacie external DVD +/- rw double layer drive. I've been trying to do this using toast 6 lite.
The finished product will play back fine on my iBook, and my mate's powerbook, but when I try and play it back through the telly on a normal DVD player it keeps pixelating - almost like a pulse.
Any ideas? Will save a friendship....
I've been using bog standard sony DVDs, and burnt them at 16x. I'm going to give it a bash at 1x as I've heard this might help - but there seem to be two options in toast - 1x and 1xDVD.
Thanks, Paula.

Paula:
You didn't post any information about how you authored/burned your DVD, but this is a general basic workflow:
- From your sequence timeline in FCP select Export > Using Compressot
- In Compressor select the DVD: High quality 90 min preset (or the preset that match your sequence lenght!) and use the MPEG2 preset for your video and the AC3 for your audio.
- Select a destination where to locate your finale files.
- When completed, import thos .m2v and .ac3 files into DVDSP and create a track with them
- You can build your menus or just select that track as First Play and burn your disc.
- You can check this tutorial about Creating Disc Image in DVDSP (from www.kenstone.net site). It's a good procedure for safe burning.
Hope that helps!
Alberto

UPK Player Play Back Modes

Similar Messages

Maybe you are looking for