UPK v11.0.0 Developer Error Message: "An exception was detected..."

A developer on my team is receiving the following error message while attempting to record content in SAP (specifically clicking on the status bar):
+“ An exception was detected in Developer message processing thread. Developer will be shut down."+
UPK then closes and no work is saved. Has anyone else encountered this error?
Regards,
Andrea F.

I just received a similar message "The message processing thread locked up. Developer will be shut down..." This occurred when I tried to end a capture session by pressing Print Screen. I was never returned to the Developer and after waiting for several minutes the message appeared. I guess I'll be submitting a ticket with Oracle as I can't find any references to this error.

Similar Messages

  • Error Message: "A virus was detected in FILENAME. This file will not be uploaded"

    I have been synching files using Creative Cloud Connect for many months. During the past few weeks, I get the message "Some files failed to sync". When I click on "Learn more", it has 3 files there and all have the message "A virus was detected in filename . This file will not be uploaded". I scanned all three files with AVG and Malwarebytes (installed on my system) and both report that there is no virus in those files. I have tried to chat with support but I could not find any resolution with them. I believe that I never got to the right place. I was connected with 5 different people. At the end of the last discussion I spoke to Adobe Captivate support. It so happens that the files with that error are all Adobe Captivate files. But that support also concluded that they couldn't help. I could not find similar entries in the forums either. Did anyone else have this problem?
    I appreciate any help.
    Angela

    No unfortunately, I have not.  I spent over an hour on the phone with them already regarding this topic. In the end, the support in Adobe Captivate (that's the 5th support group they connected me to) told me that I wasn't allowed to upload Captivate files since Adobe Captivate 8 is not a CC application and that's why the problem was happening. I am absolutely sure that this is untrue since I have many Captivate files on CC. I think the key will be to get to the right support group. Good luck! I really hope you find a solution. Keep me informed. Thanks.

  • Popping error message "The disk was not ejected properly"

    Although I am rejecting my external hard disks, still when I unplug them the error message "The disk was not ejected properly" pops up.
    Worth to note that disks are not in sleep.
    My McPro is running OS X Lion.

    I've been following this issue for a long time on one of the other Apple forum discussions. A suggestion was made to install an app called Jettison (by St. Clair Software). Since doing this two days ago, I have not seen the infamous "improper ejection" error message. Jettison seems to  do, automatically without any effort on my part,  exactly what the developer says: "Jettison eliminates the hassle of manually ejecting external drives before you put your MacBook to sleep and remounting them when it wakes."
    By automatically unmounting my two external USB drives when the computer goes to sleep, Jettison is  eliminating the opportunity for Apple's faulty USB power management system to improperly eject my external drives. As soon as my computer wakes up, Jettison quickly remounts the external drives. And, most importantly,  Jettison  has NOT caused any conflict with my Time Machine backups or my SuperDuper clone backups (three of which are scheduled to run automatically at 1:00am every night.
    See: <http://stclairsoft.com/Jettison/index.html>

  • When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

    when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
    i am using office2007  with windows7 premium home edition.  i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
    it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
    a real PITA.   anyone have any solution for this? Thanks 
    ken yanow

    Hi,
    Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
    Click the Microsoft Office Button, and then click Excel Options.
    Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
    check box in the General area.
    Click OK.
    If the problem cannot resolve, the Run as administrator may selected.
    Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
    Right-click EXCEL.EXE > Properties >
    Compatibility tab.
    Under Privilege Level, uncheck Run this program as an administrator
    check box.
    Best regards.
    William Zhou
    TechNet Community Support

  • In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

    In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

    use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

  • Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yeste

    Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yesterday. Anyone else having this problem? Thanks.

    I am having the same problem and took the following steps to mitigate it to no avail.
    1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
    2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
    3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
    Please advise.

  • When I attempt to sych with I tunes I get the following Error Message.  "Itunes was unable to load data class information from synch services. Reconnect or try again later."  How do I fix this?  This started happening after I updated to the latest version

    When I attmpt to synch my Iphone I get the following error message.  "Itunes was unable to load data class informationfrom synch services.  Reconnect or try again later.  This started after I uddated to the latest version of Itunes. What should I do?

    My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade. 
    Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down.  Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
    Still:  Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?!  Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake). 
    **banging head on table**

  • ITunes stopped working on Windows 8. Error message 7: iTunes was not installed correctly.

    I have Windows 8. Originally iTunes worked fine, then it couldn't update (said it was unsuccessful). Then it stopped working, so I (after much research) tried a long and tiresome method of removing all Apple products and re-installing them. I did this 3 times and it eventually worked and has been working fine for a few months. Recently, when trying to update, it has said "update successful", but when checking for new updates, finds the same one it supposedly just installed, wanting to install it again. For a few weeks now it has not worked at all, saying "error message 7: iTunes was not installed correctly" when I attempt to open iTunes. I can't bring myself to go through the whole process again of uninstalling and reinstalling everything, it took hours and it clearly doesn't solve the problem. I have no idea what the problem is. Reinstalling only iTunes doesn't work. The support pages have no advice available for my crappy version of Windows.
    Please help me!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    It shouldn't really take that long to do, assuming it goes smoothly.
    tt2

  • When I try to open a pdf file I get an error message stating "There was an error opening the document.  The file is damaged and could not be repaired."  Other pdf files open fine.

    When I try to open a pdf file I get an error message stating "There was an error opening the document.  The file is damaged and could not be repaired."  Other pdf files open fine.

    You need to get a new copy of the PDF.

  • HT4463 no able to buy apps - can download free ones only - error message is: There was an error in the App Store. Please try again later. (100)

    no able to buy apps - can download free ones only - error message is: There was an error in the App Store. Please try again later. (100)
    i need solution ?

    Hi there hamzaarab!
    I have an article here for you that deals with this exact issue:
    Mac App Store: "An unknown error occurred (100)" when purchasing
    http://support.apple.com/kb/ts3637
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop  After restart error message appears:  - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

    PROBLEM: Cannot print from Photoshop
    After restart error message appears:
    — “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
    • All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
    The printer printed fine until about 2 weeks ago when this error message appeared.  Printing continues from Pages, I-photo, preview etc. —  only Photoshop fails.
    The printer has been turned on and off, as have open documents been closed and open etc..   Preferences reset.  Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
    Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
    Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
    Attempting unsuccessfully to print to Epson 3880
    What Adobe support will be of help.
    Robert Darling —  2/19, 20, 21,22,23/2015

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • When i try to open iTunes I get error message "MSVCR80.dll was not found"

    When I try to open iTunes I get error message "MSVCR80.dll was not found"

    Hey Manyangels!
    Here is an article that will help you troubleshoot this issue with your iTunes:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I keep getting an error message saying "There was a problem connecting to the server.  URLs with the type "file:" are not supported."  Can someone help me get rid of it.

    I keep getting an error message saying "There was a problem connecting to the server.  URLs with the type "file:" are not supported"  Can someone help me locate and get rid of this error.

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • Keep getting error message that iphoto has detected inconsistencies and needs to rebuild

    while adding photos to library keep getting error message that iphoto has detected inconsistencies and needs to rebuild the library..how do I fix?

    By rebuilding your library.
    Back up your iPhoto library before you do that.
    If iPhoto is open, quit it.
    Hold down the Option and Command keys while you open iPhoto (click the iPhoto icon in the Dock).
    The Photo Library First Aid window opens.
    Click "Rebuild database" and click the "rebuild" button.
    If this does not solve the problem, see "option 2" in Terence Devlin's post here:
    Re: i keep getting the message iPhoto has detected inconsistencies in your library but after repairing it it just quits
    Regards
    Léonie

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for