UPK v11 Server installation

Hi,
I am attempting to install UPK v11 developer server on a developer machine, but during the installation when asked to select the database server the list is empty and stays empty when I click "browse".
A MySQL Server is running on the machine (community server 5.1), and I have verified that the database server itself is configured properly and running.
Any help would be greatly appreciated.
Sincerely,
Jens

Hi Jens,
Further to Alex's comments, just be cognisant of the version of DB software that you wish to install.
The UPK 11 Technical Specifications only talk to the following DB software:
1. Oracle 10.1, 10.2, 11.1 and 11.2
2. Oracle 11gR2 Express Edition
3. SQL Server 2005 (SP3 or SP4)
4. SQL Server 2008 (SP1, R2, SP2, R2 SP1)
I have not personally used Microsoft SQL Express, and it isn't mentioned in the tech documents, but may be worth a try if you do not have any of the above at your disposal.
Good luck!
Regards,
Greig

Similar Messages

Oracle - Microsoft Odbc Error while installing UPK on Server 2008 64 bit..

upk VERSION: 3.5.1
os: windows 2008 server 64 bit
oracle: 11g.1 for 64 bit
i have created a user with sysdba and other privileges and i am able to login into database as well.
but when i try to run the UPK ( server) installer and select the ORacle database i am getting following error after entering user name and password.
Error:
====
An error occur while trying to connect to the server"
MSDAORA: there was an error logging into oracle
Error: oracle client and networking components were not found.
{Microsoft ODBC for Oracle} there was an error logging into oracle .
error: Microsoft ODBC Driver manager Driver SQLALLOCHandle on SQL_Handle_Env_failed(0).
Any help would be highly appreciate.
thanks.

Hi,
Have you found a solution for this problem yet?
I am facing the same issue.
I would be very gratefull for a solution to this problem.
Edited by: [email protected] on 11.06.2010 03:43

Error when installing UPK developer server 12.1

Hello,
I am getting error as "There was an unexpected error running SQL scripts. Setup will now terminate." when installing UPK developer server 12.1. Any ideas why this would come?
thanks and regards,
SD

I did another round of testing and got the same error again. This time I have collected the install log which is as below-
Installation Starts
Microsoft .NET Framework 4.5: already installed
Windows Installer 3.1: already installed
Microsoft Visual C++ 2012 Redistributable: already installed
Microsoft Visual C++ 2012 Redistributable (64-bit): already installed
Microsoft Visual Studio 2010 Tools for Office Redistributable: already installed
Windows Process Activation Service: already enabled
World Wide Web Publishing Service: already enabled
Call:[ValidateURL]
Call:[GetWinAcctInfo]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll: enabled successfully
Installation Aborted
it says aborted because I only have the option to click on OK and installer exits.
User Productivity Kit
There was an unexpected error running SQL scripts. Setup will now terminate.
OK
any thoughts?
many thanks,
SD

Server installation timeout error

I'm using the following setup:
Server OS: W2008 Server R2
DB: MSSQL Server 2008 R2
UPK 11.1.0
I have set up the database correctly (afaik) for SQL Server authentication. I created a IIS-webpage and it can be accessed via browser (testfile). When i try installing the UPK Developer Server, at the end of the installation I get the folowing error:
2012-07-09 09:29:53 INFO Application started
2012-07-09 09:29:53 INFO Command line: "C:\Program Files (x86)\User Productivity Kit\UPK Developer 11_1Server\LibraryLoader.exe" D:\Stage\UPK\UPK_Pro_v11.1.0 "/librarylocation:http://upk:443/ODSContent" /language:EN /producttier:Server /branding:UPK /overwrite:no /update:no /authenticationtype:standard /username:"content_admin" /password:***
2012-07-09 09:29:53 INFO Source path: D:\Stage\UPK\UPK_Pro_v11.1.0
2012-07-09 09:29:53 INFO Library location: http://upk:443/ODSContent
2012-07-09 09:29:53 INFO Language: EN
2012-07-09 09:29:53 INFO Product tier: Server
2012-07-09 09:29:53 INFO Branding: UPK
2012-07-09 09:29:53 INFO Overwrite: False
2012-07-09 09:29:53 INFO English only: False
2012-07-09 09:29:53 INFO Options:
2012-07-09 09:29:53 INFO Import system documents: True
2012-07-09 09:29:53 INFO Copy files: True
2012-07-09 09:29:53 INFO Authenticate only: False
2012-07-09 09:29:53 INFO Authentication type: standard
2012-07-09 09:29:53 INFO User name: content_admin
2012-07-09 09:29:53 INFO Password: ***
2012-07-09 09:29:53 INFO Update: False
2012-07-09 09:29:53 INFO Loading documents in Server - Client environment
2012-07-09 09:29:53 INFO Authenticate by standard authentication
2012-07-09 09:30:56 ERROR Gkn.OnDemand.Library.OfflineException:
bei Gkn.OnDemand.Library.LibraryComponent.AuthenticateProfile(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryComponent.cs:Zeile 388. bei Gkn.OnDemand.Library.LibraryComponent.Run(String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryComponent.cs:Zeile 309. bei Gkn.OnDemand.ComponentModel.ApplicationCore.Run(String bootComponentId, String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\ComponentModel\AppCore.cs:Zeile 154. bei Gkn.OnDemand.ComponentModel.Application.Run(String bootComponentId, String command) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\ComponentModel\Application.cs:Zeile 538.
InnerException:
Gkn.OnDemand.Library.LibraryConnectionException: There was a timeout connecting to the server. Please verify the server is running and retry to connect.
bei Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:Zeile 98. bei Gkn.OnDemand.Library.LibraryService.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryService.cs:Zeile 290. bei Gkn.OnDemand.Login.LoginService.Authenticate(IUserProfile userProfile, Boolean login) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\Login\LoginService.cs:Zeile 183.
InnerException:
Gkn.OnDemand.Library.LibraryConnectionException: There was a timeout connecting to the server. Please verify the server is running and retry to connect.
bei Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetUserSalt(String userName, String libraryLocation) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:Zeile 157. bei Gkn.OnDemand.Library.LibraryService.GetUserSalt(String userName, String libraryLocation) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\LibraryService.cs:Zeile 350. bei Gkn.OnDemand.Login.LoginService.AssignCredentials[TChannel](ClientBase`1 proxy, IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\Login\LoginService.cs:Zeile 408. bei Gkn.OnDemand.Login.LoginService.AuthenticateWCF[TChannel](ClientBase`1 proxy, IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\Login\LoginService.cs:Zeile 319. bei Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetProxy(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:Zeile 46. bei Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetLibraryInfo(IUserProfile userProfile) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:Zeile 91.
InnerException:
System.TimeoutException: Beim Anforderungskanal ist während des Wartens auf eine Antwort nach 00:00:59.9814453 eine Zeitüberschreitung aufgetreten. Erhöhen Sie den an den Aufruf übergebenen Zeitlimitwert auf "Request", oder erhöhen Sie den SendTimeout-Wert für die Bindung. Der für diesen Vorgang zugewiesene Zeitraum war möglicherweise ein Teil eines längeren Timeouts.
Server stack trace: bei System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) bei System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) bei System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) bei System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) bei System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) bei Gkn.OnDemand.Service.Content.RepositoryServiceReference.IRepositoryService.GetUserSalt(String userName) bei Gkn.OnDemand.Library.RemoteRepositoryStrategy.GetUserSalt(String userName, String libraryLocation) in e:\BUILDROOT_SUN\Builds\Branches\Hacienda\tfs\Core_DotNet\LibraryComponent\RemoteRepositoryStrategy.cs:Zeile 153.
InnerException:
System.TimeoutException: Die HTTP-Anforderung an "http://upk:443/ODSContent/RepositoryService.svc" hat das dafür vorgesehene Zeitlimit von 00:00:59.9960000 überschritten. Der für diesen Vorgang zugewiesene Zeitraum war möglicherweise ein Teil eines längeren Timeouts.
bei System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason) bei System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) bei System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
InnerException:
System.Net.WebException: Timeout für Vorgang überschritten
bei System.Net.HttpWebRequest.GetResponse() bei System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
I'm sorry for the german parts in the log, but I don't know how to change that; the installation was done in English.
So as you can imagine, any help regarding this error would be greatly appreciated.

OP again, I've narrowed the problem down. It obviously has something to do with the settings in IIS.
I have created a website called UPK that uses ssl. Nonetheless UPK installer does not recognize the secure website, and when i enter the details manually, UPK setup tries to connect to http://upk:443/ODSContent which can never work.
So the real question is:
How do I get the setup to accept my secure website?
or
How do I ge setup to access the folder ODSContent via https//<IPAddress>/ODSContent?

Error installing UPK developer server version 11.1.0.0

hi all,
am trying to install UPK developer server version 11.1.0.0 on Windows server 2008 R2 SP1 with Oracle DB as backend. After I complete the installtaion wizard and click on install, I get the below error-
Library error
Encountered a problem while populating the library. Error code: 1. Would you like to open the log file?
Click 'Yes' to open the log file or click 'No' to continue the installation.
Yes No
I get this message during the stage where it says "Please wait while setup populates the library. This operation can take over an hour in some environments."
Has anyone seen this? please advice.
thanks and regards,
SD

I did another round of testing and got the same error again. This time I have collected the install log which is as below-
Installation Starts
Microsoft .NET Framework 4.5: already installed
Windows Installer 3.1: already installed
Microsoft Visual C++ 2012 Redistributable: already installed
Microsoft Visual C++ 2012 Redistributable (64-bit): already installed
Microsoft Visual Studio 2010 Tools for Office Redistributable: already installed
Windows Process Activation Service: already enabled
World Wide Web Publishing Service: already enabled
Call:[ValidateURL]
Call:[GetWinAcctInfo]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll: enabled successfully
Installation Aborted
it says aborted because I only have the option to click on OK and installer exits.
User Productivity Kit
There was an unexpected error running SQL scripts. Setup will now terminate.
OK
any thoughts?
many thanks,
SD

SharePoint Server 2013 single server installation licenses and system requirements

We are thinking of setting up a SharePoint Server 2013 for the following features to be accessed by our test team (<100 users)
Our requirements are as follows -
Total user access <100 users(starts with 50 and may be go upto 100)
Mainly Access to TeamSite(Document library), WiKi, BI reports view(SSRS Reports integration)
We have a Visual Studio Ultimate license that covers SQL Server 2012 and Share Point server 2013.
We have also got a Amazon EC2 machine access to create a Xlarge box with Microsoft recommended Cores, Memory, storage for SINGLE INSTALLATION of SharePoint Server 2013 and SQL server database on Windows Server 2012
My queries are as follows
Are the licenses above sufficient to go ahead with setting up the SP Server? or do i need any other licenses ?
I would like to create local LDAP in amazon without connecting to the company active directory. Would this be possible? We have users from other locations(different countries) providing services to our company and we would like them to access this portal
to share and access docuemnts without any network issue etc..
Are there any known firewall issues with EC2 machines for share point deployment
System requirements for single server installation (with or without BI reports)
Please note this implementation is only for internal use by the test team and is not critical. Not a production implementation.
Is there any better solution?
Much appreciate your help
Thanks
Vara

MSDN subscription licenses for SharePoint aren't, as far as i know, for use as production devices. This means that whilst you can use it for testing and development you can't use that license for the SharePoint server that you'll all be using.
As such I think you will need to buy a SharePoint 2013 server license. The same goes for SQL, Windows etc.
There is also the question of user licenses, ie. CALs. I don't remember if those come included as part of an MSDN subscription.
2) Possibly. As long as Amazon can host a domain for you it should be possible.
3) Pass. Microsoft prefer you to use Azure and most of my training and experience is with that.
4) High. 4 cores, 24GB of RAM minimum.
http://technet.microsoft.com/en-us/library/cc262485.aspx#hwforwebserver
You'll either need a 2XLarge or a memory orientated box, in which case you won't have much storage space.
Internal team infrastructure is still important. If you're using it enough to make it worth having then you need it there and running.
Have you considered using Office 365?

SAP DMS server installation Query

Guys,
I would like to share my plans on DMS server installation under DEV,Quality,prod stage and requesting you all to validate and send me any comments if I am wrong anywhere.
-        We have 1 external DMS server of (250Gb capacity)
-     We are now in realization phase, As we know that we have 3 servers namly Development, quality and production server.
-     In Development Server we do Baseline DMS customization
-     In Quality server we do Integration testing
-     There will be as external computer with harddisk capacity of 80 GB,I will Install Content server CD and make that 80GB hard disk as content server for storing the documents, create content repository and store the documents which are to be tested under both development and quality server stage(Note : we can use SAP database for both testing purpose but If we load huge data there,it will slowdown the server drastically)
-     During the production server install the DMS server (250 gb) and define the content repository config under production server and start storing all the fresh document
-     Note: Since the tested documents are stored in local PC we can avoid all the tested documents under quality stage only,once the DMS server is installaed in production server we can freshly load the documents.
-     Note: I knew I have to install twice the Content server cd(once with 80 GB local hard disk and later with External DMS server)
This is how I planned, I request you to highlight the pain areas by this method else give me the confidence of how I planned?
I appreciate for immediate solution; also how does Kpro comes into picture here.
Points will be rewarded for sure.
Regards,
Murali.S
DMS consultant

Hi Murali,
As per my understanding you want to keep a Temporary Content Server for your Dev & QA system but a full fledge 250GB Content server for Production.
This is a Good method you are following, i.e. when you go for production you will not have any junk data, you will be loading only fresh data (originals) into it.
There is nothing harm or pain in doing this, only thing is you have re-configure the Content Repository and Category in Production System (SAP).
Your Basis person has to open Production System for doing this Settings (Defining Content Repository and Content Category with Port, HTTP, etc)
Document Area to be ensured in each client at any point of time, Physical machine, IP address, Port etc.
You can maintain a Excel sheet with a following Columns:
<b>Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port.</b>
For Transaction OACT & OAC0.
Rest your method is fantastic.
Best Regards
Rehman
Reward Your Points If satisfied.

New Server Installation, now client computers can't connect to services. Where to go from here?

Hello.
I recently had to setup a new Mac Mini Server (Mavericks). We had one previously but one of the raided hard drives failed. No backup.
Our office of 6 Apple MacBook Pros used to connect to all file sharing and calendar services, easily.
On the new Server installation, I added the same users with the same passwords etc. The client computers cannot access calendars, file sharing etc. On the clients, I have opened up System Preferences > Users & Groups > Login Options > Network Account Server and added the FQDN of the server, but I get an error ' Unable to add server. Connection failed to the directory server. (2100) '
2 of the clients are on Mountain Lion. The rest are on the latest Mavericks.
I'm a bit lost on where to go from here and would appreciate your help before I wipe everything and start from scratch.
Thanks.

Hi Strontium90
Ha! There was a time machine backup, but we had a storm here which rendered it and the server useless. We are such a small team without an 'IT' guy, apart form me as I have a vague interest in all things Apple.
What is your DNS name space?
Do you need the name here?
Do the servers and the client agree on this name?
Not sure what you mean. The domain name works as when I type it into a web browser, I can see the 'Welcome to Server' page.
Did you enable an Open Directory Master?
Yes. Open Directory is running.
Did you grant the users/group access to the service you are offering?
Yes. All services are checked for each user.
Make sure the user/group is permitted to access your enabled services.
All allowed, too.
Oh, and implement a backup strategy
Will do, once I sort out this problem. Time Machine and off-site, I think.

Start multiple domains simultaneously on 1 Weblogic server installation?

Is it okay to start and run multiple domains simultaneously. Better yet, when having multiple domains on 1 WLS server, should each domain have a different port number in order to be run simultaneously?
Here's my scenario - I installed Oracle Business Intellgence, which by default installs and configures WLS server for certain Business Intelligence applications (BI Publisher). This instance was running fine and good and still is.
Then I had another application, Oracle Data Integrator, which has a Console piece that requires a domain on WLS. So instead of modifying the existing domain for Oracle Business Intelligence, I created a new domain via the Configuration Wizard and selected those components for Oracle Data Integrator.
therefore current domains:
...\domains\bifoundation_domain --> installed automatically as part of Oracle Business Intelligence
...\domains\odi11g --> I created this domain after I
Now I have 2 domains under 1 WLS Server (windows 7 64bit), but if I startWeblogic.cmd for the bifoundation_domain, and I startWeblogic.cmd for the odi11g...then only the components for the bifoundation_domain become available via the WLS Console.
Questions:
- Can I run both domains simultaneously?
- Should I have modified the bifoundation_domain to include Oracle Data Integrator component; therefore only having 1 domain but having everything run under that domain?
- Does the Port for each domain matter? both bifounddation_domain and odi11g domain use ports 7001
Are there any other considerations? Thanks much.

Hi,
It is perfectly OK to run multiple domains on a single Weblogic server installation. Only constraint would be you have enough capacity available on your server to start multiple instances.
Things to note is, if your domain1 is running on listen address : port { localhost : 7001 } then your other domain should be configured on a different port say {localhost : 8001 }. If you want both domain to run on same port then go for virtual IP's to be plumbed on your physical network interface and configure as,
domain1 - { ip1 : 7001 }
domain2 - { ip2 : 7001 }
this way you will can access both domain admin console on same port.
Remember, Weblogic resources cannot be shared between domain, however a single nodemanager will be enough to monitor both the domains.
* rank it if answer is helpful :) *
Thanks,
Ranjan

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

BPEL Server installation on JBOSS application Server on SUN SOLARIS

I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?

Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected]

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS. Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc. Somethings not right. What the Heck ?

See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

Service Manager data warehouse management server Installation fails

Hi there,
In Virtual Machine Windows Server 2012 R2 Standard with my user being a Local Admin and SQL Admin. I tried to do a Service Manager data warehouse management server
first installation I am facing the following image as error:
In the event viewer I get the following error:
"Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211
The arguments are: -2147024809, The parameter is incorrect."
In the Setup log, some of the errors are:
WixRemoveFoldersEx: Entering WixRemoveFoldersEx in C:\Windows\Installer\MSI35E.tmp, version 3.7.1224.0
WixRemoveFoldersEx: Error 0x80070057: Missing folder property: PSCONFIGFOLDER.A591E3B4_D228_431D_BF89_99D52C8FFB76 for row: wrf4582BC4C5CC47B1D2380408CD7A752DC.A591E3B4_D228_431D_BF89_99D52C8FFB76
CustomAction WixRemoveFoldersEx.A591E3B4_D228_431D_BF89_99D52C8FFB76 returned actual error code 1603 but will be translated to success due to continue marking
CAStartServices: CAStartServices was passed . OMCFG
CAStartServices: Checking if service already started. OMCFG
CAStartServices: Attempting to start service. OMCFG
CAStartServices: StartService failed. Error Code: 0x8007042D.
ConfigureSDKConfigService: CAStartServices failed, trying again.... Error Code: 0x8007042D. OMCFG
Action start 17:47:05: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
MSI (s) (EC!4C) [17:47:05:483]: Note: 1: 2711 2: MOMGateway
SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
I have checked the following post but it did not help me:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c42bb04d-a51e-4037-a8a3-37d714d6faac/scsm-management-server-installation-fails?forum=systemcenterservicemanager
Could you please help me with this issue?
Thanks a lot,
M

Hi,
Sorry I cannot post the full log. I have found also these errors in the log:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: There is no previous serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\InstallationAccount
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSMDWadmins
RegisterSdkSCP: Error: Access is denied.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "D:\Program Files\Microsoft System Center 2012 R2\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
Thanks for your reply.

SAP WAS J2EE server installation on Windows Vista

Hi Experts,
Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
Is there SAP J2EE server also available with Vista compatibility ?
Regards,
Yomesh

> Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
>
> Is there SAP J2EE server also available with Vista compatibility ?
The problem with J2EE is the support status of the used JDK. Sun does not support 1.4.2 under Vista/Windows 2008, technically it works.
Markus

VM Server installer does not recognize RAID configuration in Intel ESRT2

Hello,
I'm having a big issue here trying to deploy my third Oracle VM Server.
I have:
- A Intel Server Board S3420GPLC
- A Intel Xeon X3440 processor
- 16GB DDR3 ECC Memory
- Six 1TB Hard Drives
What I'm trying to do:
- Create a RAID array using Intel ESRT2 (Embedded Server RAID Technology II) using all the discs (done)
- Install Oracle VM Server into the array
- Install some VMs....
The problems:
- When I boot the VM Server installer from USB stick I got an error saying that there is not enought memory. This issue is solved by typing "linux mem=15GB"
- I got a screen per disk warning me about that the discs need to be initialized and all the data will be lost
- When I go to the disk partitioning screen all the disks are listed separated, the installer simply don't recognize the RAID configured before.
What I already tryied:
- Change the RAID controller from ESRT2 to Intel Matrix
-> Didn't solve.
- Create a Driver Disk with the disk images supplied by Intel here
-> I launch the installer using "linux mem=15GB noprobe=ata1 noprobe=ata2 ....". When Im asked by the installer to load the drivers it doesn't recognize the disk, so i couldn't load the drivers.
Now, the questions:
- Is there another driver I can use do make the vm server installer recognize the RAId configured?
- Is there a better way to setup this server, considering that it needs to be "self contanied" (store and run vms)?
Edited by: xyp on 14/10/2010 11:37

So...
- I have installed VM Server into ordinary linux partitions on the first disk.
- I have created a big partition in the first disc with the space not used for the VM Server
- I have created five equal partitions on the other discs
- I have configured software raid 10 using mdadm
Now the problem seems to be solved, i have a storage repository with almost 3TB and can deploy my VMs.
Unfortunatelly only my windows 2008 r2 hardware virtualized vm is working, the linux paravitualized guests not. but this new issue will be a subject for another topic.

UPK v11 Server installation

Similar Messages

Maybe you are looking for