UpkServer 64 bit and UPK Developer Client on 32 bit ??

Quick question.
if I have Windows 2008 server - 64 bit and I have UPK 3.5.1. with Oracle 11g release 1.
For above configuration Can I have Upk developer client on 32 bit windows machine or upk developer clients need to be on 64 bit also ?
thanks,
Ramiz

Hello,
The clients can be 32-bit.
Based on your other posts, it seems that you're experiencing some errors during installation which are a bit beyond the scope of this forum. I encourage you to seek the assistance of our support team. You can log a ticket at support.oracle.com.
Best regards,
Marc

Similar Messages

Can use AD authentication on UPK Knowledge Center and UPK Developer Client?

I am quite new to UPK and any one help me advise on whether possible to use AD authentication in upk knowledge center and dev client.
My upk version is 11.1 pro.
Edited by: 985224 on Jan 30, 2013 7:19 PM

Hello,
UPK supports Windows Authentication. You can read more about this functionality in the online documentation. Additional information can be found in the announcement at the top of this forum: https://forums.oracle.com/forums/ann.jspa?annID=1175
Best regards,
Marc

Is it possible to install oracle 11g client 32 bit and oracle 11g client 64

Hi,
I have Windows 2008 R2 64 Bit Operating Server Installed.
Other software that are Installed :
1) Visual Studio 2010 Ultimate 32 Bit.
2) Microsoft SharePoint server 2010 64 Bit.
For my development purpose I want to install both oracle 11g client 32 bit and oracle 11g client 64 on the same machine.
Is it possible to install both 32 and 64 bit instance on the same machine.
Thanks
Sambit

959211 wrote:
Hi,
I have Windows 2008 R2 64 Bit Operating Server Installed.
Other software that are Installed :
1) Visual Studio 2010 Ultimate 32 Bit.
2) Microsoft SharePoint server 2010 64 Bit.
For my development purpose I want to install both oracle 11g client 32 bit and oracle 11g client 64 on the same machine.
Is it possible to install both 32 and 64 bit instance on the same machine.
Thanks
Sambityes, possible; but minor challenge to manage dynamically
how to ensure that you actually use the flavor you desire?

How to uninstall UPK Developer Client ?

I can see the option to uninstall server in my Control Panel > Programs, but, not for Developer client.
Thanks!

Hi Sahil,
I have noticed the same on my Server/Client install for UPK 11.1 - there seems to only be an option to remove the server component of the install.
If I look at the UPK Developer properties, it executes ODDev.exe from the server installation folder, so I would assume that they have integrated the server/client install.
The Install Guide for UPK 11.1 also tells users to remove the client via Control Panel (which is a bit bias seeing that it cannot be done on 11.1 for a client/server combination...)
I will let you know if I figure it out in any way...
Regards,
Greig

CFMX8 64 bit and SUSE SLES 10.2 64 bit glibc 2.4.31 any successfull install/production usage?

Greetings
CFMX expected version 8.01 64 bit.
OS: SUSE SLES 10.2 64 bit with glibc 2.4.31-*
Expected deployment: war under Application Server Container
, JDK 1.6.x
Previous Deployment CFMX 7.02 32 bit, war deployment, RHEL 3,
JDK 1.4.x
We are planning to migrate/upgrade to the CFMX8 64 bit
version but I have been reading that it requires glibc-2.5.25
RedHat 5 is not an option, we have SLES 10.2 64 bit OS which
has a supported version of glibc-2.4.31-*
I have read the following links on the web:
http://rachaelandtom.info/content/coldfusion-801-updater-64bit-linux-gotcha
http://www.talkingtree.com/blog/index.cfm/2008/5/5/ColdFusion-801-64bit-and-Supported-Linu x-Distros
http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:56889
Adding OpenSUSE RPMS's for glibc-2.5.25+ is not an option due
to other dependencies on the server configuration and what
potential problems that might cause.
Any options there besides separate 32 bit install under SLES
10.2 32 bit?
Any idea what features of the CFMX8 will cause "floating
point exception" as noted on above links.
Why particular glibc-2.5.25+ dependency on 64 bit OS for
CFMX8 where a latest major distribution of SUSE, SLES 10 is at
glibc 2.4.31.
By the way I did install as war (CFMX8 Dev. Edition) on SLES
10.2 and got to the CFMX admin interface, so this is not the part I
am asking about.
Thanks for any feedback on this issue.

Actually you don't need an EFI64 ROM to support 8 GBs of RAM. That is determined by the bus size and the memory controller. The ROM only determines the maximum amount of RAM that the OS can address. None of the Macs currently in production can support even the maximum supported by the 32-bit kernel. None have a wide enough memory bus. Of course newer models may support larger amounts of RAM when they are released, but for now there's not much need for using the 64-bit kernel except if you are developing 64-bit software and need to test its compatibility with the 64-bit ROM.

64 Bit Installer says it's made for 32 bit and tells me to install 64 bit

I used PC Mover to clone my previous XP laptop so the version of iTunes wasn't really made for the 64-bit OS of my new laptop and hasn't worked since. I try every couple of months to fix the problem before giving up out of pure exhaustion! I download the new 10.1 for 64 bit operating systems and during install it tells me that this installer is for 32 bit systems and I need to install the 64 bit installer!!! Nothing works!!! Does anyone have a clue how to make iTunes work again or where I can get a 64 bit installer that my computer will recognize as a 64 bit installer???

I download the new 10.1 for 64 bit operating systems and during install it tells me that this installer is for 32 bit systems and I need to install the 64 bit installer!!!
Yeah, it's actually the 32-bit version that PC Mover has wedged into the new 64-bit PC that is returning that 32-bit message. (When you try to install the later version, the installer tries to remove the previous version which suddenly realises it is on a 64-bit system, and everything turns to custard.)
In the best of all possible worlds, I'd prefer to remove the 32-bit iTunes by undoing the migrstion (using the PC Mover undo function). Unfortunately, my understanding is that you can only completely undo the entire migration.
If you aren't keen on that, there's an alternate strategy described in the following post:
http://discussions.apple.com/thread.jspa?messageID=12712585&#12712585
You may not need to search for a copy of Windows Installer CleanUp. In his/her reply to that post cmcmd reports:
Fantastic! I contacted PC Mover and they sent me a link to the Microsoft Clean Up utility. I deleted all of the Apple files, installed teh 64 bit iTunes and all appears to be working.
So you could perhaps try your luck with PC Mover too. Fingers crossed the support person you get through to will also have the link to the CleanUp download.

MySQL 5.0.77 (64 bit) and unixODBC 2.2.11 (32-bit) on Linux 64-bit

Hello All,
Is MySQL 5.0.77 (64 bit) compatible with unixODBC 2.2 (32-bit) on Linux 64-bit server ?
I am facing problem of inconsistent connection to MySQL through the unixODBC driver manager.
I am also using mysql-connector-odbc 3.51.27 which is also 32-bit....
Any help is appreciated...
Bhushan

<div class="DownloadDate">"Release date : 3 Jul 09<div class="DownloadShortDesc">This?download is a?driver providing Microsoft? Windows?7, Windows Vista? and Windows XP support for Creative Sound Blaster? Audigy? series of audio devices. For more details, read the rest of this web release note."?
Right where do I start...... I got the latest drivers installed, "What You Hear" was working for about oh four recordings then stopped and back to choppy recorded sound, I went through alll options and nada. So I downloaded Audacity to see if this was a problem with Wavelab and re-tried. Well same thing choppy sound and even rebooting did not help. So I will be taking EVERYTHING!!!!!! CREATIVE off my machine, if these idiots cannot be bothered to release drivers that work then I'm going elsewhere. My music creating will have to be put on hold, my 22m will still have to sit in it's box.
Creative you are all a bunch of ?$"?%$%" idiots period. You have ALWAYS (till now in my case anyway) had good drivers. Even though Windows 7 has been in RC for ages you (absolutely missed that boat, hell you didn't even get up to try to catch it) cannot be bothered to write drivers that work and your idiotic half cooked attempts at customer service to give your bread and butter (that's right your customers who keep you in business) solid drivers are an absolute joke. YOU CAN KISS MY SHINY METAL HINEY!!!!! (thanks Bender lol). I am going to my onboard drivers. Thanks Creative (the name "creative" is kind of contradiction in itself, you should look up the meaning of the word lol). Oh and I will be advising EVERYONe who thinks of upgrading to Windows7 to avoid Creative hardware.
:angry::angry::angry::angry::angry::angry::angry:: angry::angry::angry::angry::angry::angry::angry::a ngry::angry:
Question for forum users: what is the best way to get rid of every bit of drivers?

Hyperion Essbase on 64-bit and Other application are on 32-bit

Hi
I am going to Install Hyperion Essbase on AIX (Version: 6.1) on 64-bit and Other Hyperion application like EAS,EIS, calc manager, Foundation services, Financial report and planning on windows 2008 SP2 with 32-Bit.
I future any connectivity issue will occur with two different bit type or there will no issue.
Please guide me here, above combination is fine or not.
Thanks
Dharm

Hi
read support matrix :- http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
regards
alex

Computers came with Windows 7 64-bit and we need Windows 7 32-bit

Our company purchased 5 IdeaCentre K300 computers from a big blue retail store. The computers came with W7 64-bit Home Premium preinstalled. We also purchased 5 Windows Anytime Upgrade PIN's allowing us to upgrade to W7 Professional so we can add these computers to our domain. We have several products that launch from domain share and won't work with the 64-bit OS and running in XP mode just flat out doesn't work (for those apps). The person who purchased the computers was told the computers contain both 64-bit and 32-bit W7 Home Premium and we can switch to the 32-bit version by using the OneKey Recovery utility then run the Windows Anytime Upgrade. I booted one of the computer several time and pressed the F2 key when the Lenovo logo appeared and only have one option, the 64-bit version.
How do I obtain the 32-bit version of Windows 7 Home Premium for these computer?
Thanks in advance,
Solved!
Go to Solution.

it's not possible to switch windows 32 <> 64 bit by performing clean windows installation ( with one key recover )
you need to install clean windows installation. download legal windows iso from the link below, then make a clean installation for your computer, for activation, use online activation or call microsoft.
http://forum.notebookreview.com/windows-os-software/428068-legal-windows-7-download-links-just-like-...
ps: make sure you download 32 windows. and burn recovery discs before clean windows installation, just in case.
you can download drivers from the link below:
http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_list.aspx?CategoryID=856301
edit:
windows anytime upgrade pin's allowing us to upgrade to w7 professional
you may select windows 7 32 bit while upgrading windows. so you won't need to download/install windows 7 from legal iso.

Oracle 8i Server (32 bit) and oracle 9i client (32) bit on Win 2003 64bit??

Hi,
1st server (DB Server)
OS : Windows 2000 Server
Oracle 8i Server (32 bit)
2nd server (Web Server)
OS : Windows 2003 SP2 (64 bit)
Oracle 9i client (32 bit)
After i installed, oracle 9i client (32 bit) in Windows 2003 SP2 (64 bit), i managed to install and configure tnsnames and connects using SQL Plus. However, i CANNOT see Oracle in ODBC.
Que 1 : Why? Why i cannot see any Oracle in ODBC? Is it because of 64 bit?
Que 2: If i installed Oracle 9i client (64 bit), will it solve the problem?
Que 3: Will my .Net software gives problem when application installed in IIS interacts with DB server???
thanks
rama

user632098 wrote:
I ahev Oracle 11.2 64 bit client installed on a Windows Server Now I have a reuqireemnt to install Oracle 11.1 32 bit for some SQL Server SSIS connectivity to Oracle.
I can install 11.1 in a separate HOME. Porblem I have is if I install 11.1, it will put 11.1 ORACLE_HOME\bin before 11.2. How can I sendure that 11.2 is before 11.1, so sqlplus is exceuting from 11.2. I do not wnat to deisntall 11.2 and then resinstall it.
Thanks.
establish the PATH variable to contain the desired order

Deleting frames with UPK developer client 12.1.0.1

when deleting frame(s) with UPK client 12.1.0.1 (or 12.1), it does not give you a warning message to confirm if you want to delete the frame. Is there a setting for this I am missing or it is by design?
thanks and regards,
SD

Software is working as designed.
https://support.oracle.com/epmos/faces/SearchDocDisplay?_adf.ctrl-state=14r3lib0kb_4&_afrLoop=546636018391066#GOAL

Develop forms in 32 Bit and run this fmx on 64 Bit ?

can I develop with 32 Bit Forms 11.2 on 32 Bit Windows and
run this fmx' on a 64 Bit Windows Server Installation
with 64 Bit WLS and 64 Bit forms 11.1.1.4 ?
regards

Be aware that Oracle has always provided the Forms compiler with all Application Server installations. The purpose was to provide the utilities needed in order to generate machine compatible executibles. The Forms fmx, mmx, and plx files are not portable. It has always been required that they be created on the machine where they are expected to be run.
So, regardles of whether you are using Application Server 9, 10, 11, or any other, your installation includes the tools needed to create the proper files for your machine. Of course this assumes you have installed the proper Application Server release which was inteneded to support running Forms/Reports.
If you have access to MyOracleSupport, refer to Note 299938.1

Cant play DRM encrypted content with Win 7 - 64 bits and IE9 - 64 bits

Hi,
I have a problem that I need to resolve...
Everything runs fine with Firefox, Chrome, IE7, IE8, Safari on Windows XP 32 bits as well as 64 bits, except on Windows 7 64 bits with IE9 64 bits and Flash 11.3. 64 bits. Furthermore, it's work with Windows 7 32 bits with IE9 32 bits and flash 11.3 32 bits.
After the flash client executes a "loadVoucher(drmContentData)" for the licences server, I receive as a response the error code 3303 ?
According to the reference of the runtime error, it's says that the content is expired.
3303
Content expired.
Reacquire voucher from the server.
Have you met this problem already, if yes, how did you solve it?
Thanks in advance
source : http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/runtimeErrors.html

Hi Hiroshi,
EDITED - 2 hour ago
yes, the encrypted content packaged with the policy.expiration.endData only with a date very far away.
I tested that with IE9 32bit on Windows 7 64bit machine, the video works. Flash Access response without any error.
Here is my result from my tests with IE9 32-bit and IE 64-bit Edition
OS
broswer
flash version
result
test # 1
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (64-bit Edition)
11.3.300.268 (64 bit)
fail
test # 2
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (32-bit Edition)
11.3.300.268 (32 bit)
succes
test # 3
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (64-bit Edition)
11.3.300.268 (64 bit - debug)
fail
test # 4
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (32-bit Edition)
11.3.300.268 (32 bit -debug)
success
test # 5
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (64-bit Edition)
Flash player "Square"
not tested
test # 6
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (32-bit Edition)
10.3.182.20
success
test # 7
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (64-bit Edition)
11.2.202.235 (64-bit)
fail
test # 8
Windows 7 Pro. SP1 64 bit
IE 9 9.0.8112.16421 (32-bit Edition)
11.2.202.236 (32-bit)
success
Windows seems to be not in cause, the problem seems turn around with the flash player version 64 bit .
Thanks,
Seb

Compatibility problem windows7- 64 bits and oracle 8

I have a compatibility problem with windows 7 and 64 bits and oracle 8 client
the data server is also version 8
What type of client is compatible with oracle 8 and 64 bits?
or any solution to the problem.
I use the client to run a desktop application
thanks

Oracle 8 client is not certified on Windows 7. Client 10.2.0.5 is compatible with Oracle 8 and is certified on Windows 7 too.
To install 10.2.0.5 client, please refer to the MOS document.
How To Install Oracle 10.2.0.5 Client Software on Windows 7 (32 or 64-bit) and Windows 2008 R2 (64-bit) (Doc ID 1316079.1)

Differentiate 32 bit and 64 bit

Hi Guyz,
How do we know the SAP we are using is 32 bit or 64 bit?
I am not able to find out this information from the Status.I am planning for a Kernal upgrade for ECC6 and confused which(32 bit or 64 bit) Kernal to use.
Warm Regards,
Syam

Dear Syam,
Please do refer to the note given by Manu . It is actually very old and not updated, but has generic command like once you navigate to exe\run (or a similar path to mine) of your server using command line/ command prompt, you can use disp+work.exe -version etc. In fact I will quote the whole section from it - Point - 12 - please note some of them might be outdated.
12. How can you find out whether an object is installed in its 32-bit or 64-bit version?
a) R/3 executables (R3trans, Kernel, tp, R3load):
                       cd /usr/sap/<SID>/SYS/exe/run
disp+work -version
R3trans -version
etc.
If no bit-version is mentioned within the text, this means it is a 32-bit version. 64-bit version would return something like       .... COMPILED WITH 64-BIT LIBRARIES....
b) Oracle
                       as ora<SID> user start svrmgrl
In the header it shows oracle-version and bit-number.
you can also do a SELECT * FROM V$VERSION;
                       Oracle client-lib
library oracle is using CD $ORACLE_HOME/LIB
FILE LIBCLNTSH.<EXT>libary the R3-tools are using
Please check note 180430 for your R3 release specific oracle client note. The location of the clientshared library has changed with different R3 releases. Get the location of the library from that note and then execute:
cd <directory where the clientlib is in>
FILE libclntsh<version>.<extension>
Most kernels also have the function calls to the oracle libraries extracted to a new library dboraslib.<extension> Please also check this library:
cd /usr/sap/<SID>/SYS/exe/run
FILE dboraslib.<extension>
c) OS
HP:
getconf KERNEL_BITS executed as root user returns either 32 or 64
DEC-UNIX:
automatically 64-bit - also shows with the command /usr/sbin/sizer -v
AIX:
beginning with release 4.3.1 64-bit; please make sure that all hardware components are 64-bit. When installing 4.3.1 AIX automatically detects whether your hardware is 64-bit and will install the necessary 64-bit software components. The easiest way to find out whether AIX is 64-bit is by the following commands:
lslpp -l bos.64bit - this should return a line that bos.64bit is installed
genkex | grep 64    - this checks whether the 64-bit kernel extension is installed. it should return something like
149bf58 a3ec /usr/lib/drivers/syscalls64.ext.
For further details refer to the following webpage http://www-1.ibm.com/support/ docview.wss?rs=0uid=aix12465b658044fc574852569e70056e923
SOLARIS:
isainfo -v

UpkServer 64 bit and UPK Developer Client on 32 bit ??

Similar Messages

Maybe you are looking for