Upload a new SAP GUI Logo.

Hi,
I'm trying uploading a Logo of a company in SAP GUI but without success.
I follow the following link to perform that:
http://www.sap-img.com/basis/changing-the-sapgui-logo-on-the-right-hand-side.htm
It seems the clients are locked.
When I execute trx SMW0, settings, maintain MIME types, I cannot see the "create" button.
How do I have to configure the client?
Best regards

Hi,
for performing that activity in SPRO, SAP NetWeaver, SAP Web Application Server, System administration, Change & Transport System, Configure clients the following parameter must be set as follows:
- Changes and Transports for Client-Specific Objects = different from No changes allowed;
- Cross-Client Object Changes = Changes to Repository and cross-client customizing allowed;
- Protection: Client Copier and Comparison Tool = Protection Level 0: No restriction.
Best regards

Similar Messages

Couldn't change a previous Logo upload in the SAP GUI.

Hi,
I couldn't change a previous Logo upload in the SAP GUI.
How about?
Best regards

For uploading a SAP LOGO follow informatio contained in this link:
http://www.sap-img.com/basis/changing-the-sapgui-logo-on-the-right-hand-side.htm
1) Try deleting tha actual LOGO from trx SMW0 table and Check the file name of the new LOGO and call it with another file name different from previous and Import the new file.
2) Check also the file name trx SM30 table SSM_CUST that must be the new file name.
Best regards

New SAP GUI Patches

Hi,
a couple of new patches were posted to ftp.sap.com :
- SAP GUI for Windows 6.40 Patch 15
- SAP BW 3.5 AddOn Patch 7
- SAP GUI 6.40 - ECL Viewer Patch 2
Best regards,
Christian

Hi John,
short update: I talked to the service market place team, and unfortunately the software corner is not a standard SMP site, so the nice features you know from other pages are not available, and won't be in the near future.
I will post news about new patches here, but as mentioned this is not part of the official workflow and may not always happen, for example when I'm on vacation
Best regards,
Christian

Bandwidth required with new SAP GUi

Hey all,
I am trying to find out what is the bandwidth required for each user for each session for SAP GUI 7.0. With the old SAP GUI 620, we had 3 KB per user per session required.
Thanks in advance.
Laura

Hi Laura,
there shouldn't be very much difference. The [Sizing Guide "Front-End network requirements for SAP Business Solutions"|http://service.sap.com/~sapidb/011000358700003943521999E] doesn't mention any version dependent values.
Regards,
Peter

Material master upload to new SAP system

Hi,
Please help me to decide the procedure on migrating material master from ECC 5.0 to ECC 6.0.
One of my idea is to use LSMW and other is to use ALE.
I am expecting many changes in the current material master, so using standard ALE BD10 is difficult. Example: ECC5.0 material type "ABC" would be "XYZ". (XYZ and ABC are of same material type, example: FERT). I choose to have different material number in new system. Like that there are few more changes.
What are all the best methods to extract the data from ECC5.0? I was checking the program RMDATGEN to download the data, but it is not readable. I can prepare a file format and map the columns in ECC6.0 LSMW. Since both the systems are SAP, I am thinking why to prepare a seperate input file format? Again I need to download the data from ECC5.0 for that format. Is there a simple to download and upload the data? Please let me know.
Thanks
Nagarajan

Here you define your Partner profile:
IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Partner Profiles and Time of Processing > Maintain Partner Profile Manually
And in the details you define for yor message type MATMAS:
Receiver port: X
Output mode: Collect Idocs and Do not start subsystem
This collection writes the idocs to a file.
This file can then be found in SAP file system with transaction AL11.
a clever basis guy can then move it from there to your network.

Export SAP GUI Logon system properites to another laptop

Hi, SDN Fellows.
I want to run SAP GUI logon systems in another laptop. After installing a new SAP GUI client. Instead of re-add the logon system properties, is that a way I can export and import from another laptop? Say I have 10 logon system properties (some with application server and some with logon groups), how do I pick the 8 of 10, and export to another SAP GUI in another laptop?
Thanks,
Kent

Hello Kent,
for SAP GUI for Windows 6.20 or 6.40, please have a look at [SAP note 512040|https://service.sap.com/sap/support/notes/512040], for SAP GUI for Windows 7.10 refer to [SAP note 1035560|https://service.sap.com/sap/support/notes/1035560] and for SAP GUI for Java please read chapter 7 of the manual included in the SAP GUI for Java installation.
Best regards
Rolf-Martin

SAP Gui 730 issue with crobu theme

Hello Frineds, Our developer team is facing some strange issue. They are able using corbu theme in SAP GUI 720. but after the new SAP GUI 730 implementaion, they are not able to use this theme. Checked all the notes etc, but its not clear on themes part. Any one faced this kind of issue or any suggestions. Thanks in advance. Regards Munish

Hi Munish,
Can you raise this in ABAP community ?
Also, to help you further can you drill down to some more relevant information ?
As far as one can understand, it's a rendering problem with SAP GUI 730.
This can also be compatibility issue with your kernel and application.
I would suggested you to check all above options.
Regards,
Divyanshu

SAP GUI Roll Out Best Practice

I was wondering what is the best practice for rolling out a new SAP GUI. My plan is to upgrade our IT Department, and Super Users with the upgraded GUI and see if any errors/problems occur. If I don't have any major issues I would roll out to the User Community after about two/three weeks.
Is this typical practice ? I have heard other Professionals say to just roll the GUI out, and don't worry about testing it ? and I have heard other companies etc.. do a set of testing scripts etc..
Any feedback appreciated. - Thanks.

Hi,
yes I have done it on our company for years.
once new released or new patch of SAPGUI is launched, I will ask my SAP Functional, ABAP and BASIS mates to try it for a month with various report and transaction variation for standard and Z-tcodes, for dialog and background processing, printing, and export and import data.
After my IT-SAP mates feels that SAPGUI is ready to be used, I will launched it to all user in another department and keep to listen any feedback from them regarding this SAPGUI.
hope it help you.
rgds,
Alfonsus Guritno

SAP GUI 7.20 patch 2 and Telephony Issues

Our Call Centers are forced to delete phone numbers via t-code SPHB SAPphone: System Administration and then re-add them using tcode FPHA. This is the only way to re-enable the phone Pop-Up and the new SAP GUI 7.20 patch 2 is installed. I am looking for a fix but can't find anyting.

We finally came up with a work around as follows:
The issue with the SAPPhone on Windows 7 is a u201Csecurityu201D issue having UAC enabled. Windows 7 would not let SAP u201CAddu201D the SAPPhone registry key under HKLM\Software\SAP. This resulted in SAP saving the registry entries in the User section of the registry. No problem for the first/setup user but forced each additional user to re-run the setup.
We included a utility u201Cregini.exeu201D and a configuration file u201Csapphone.iniu201D to grant Local Administrators full rights to the SAPPhone registry key structure. This will allow the keys to be created in the common section of the registry available to all users on the workstation.
We have a Customer Message open on this as well. Microsoft does not recommend deactiviating UAC so once again Microsoft and SAP are not the same sheet of music. We hope SAP will come out with a long term solution other than deactivationg UAC.

SAP Gui 7.20 Configure Color Settings Greyed Out

Hi, I have installed the new SAP Gui 7.20 patch 1 on 2 machines at my company. On one machine we can easily change the color settings for each theme. On the other PC, we can not go into "Configure Color Settings" to change the colors for any theme. The button is greyed out. I followed the extact same installation procedure and have the same access to both as well.
Has anyone seen this issue before and know how to fix it?
Thanks,
Marty

Another classic SAP problem where the solution involves patting your head while simultaneously scratching your nuts and jumping up and down.
Follow these steps:
1. open SAP Login Pad.
2. open up a client and click on the 'Customise Local Layout' icon (Alt + F12).
3. Select 'Options...'
4. Select the ironically named 'Enjoy Theme'.
5. Click 'Apply'
6. Click on 'Ok' and close the client windows and the SAP Logon Pad. Note: you must close restart the SAP Login Pad for the them changes to take effect.
7. open the SAP Login Pad.
8. open up a client and click on the 'Customise Local Layout' icon (Alt + F12).
9. Select 'Options...'
10. click on 'Colors in System'
11. select your favourite colour and click on 'Apply'.
12. click on 'Ok'.
If this post can stop even one person from going insane it will have been worth it.
Regards,
Nick

ANN: SAP GUI for Windows 7.20 Patchlevel 13 is now available

Go to the bottom of this message for the most current information.
Hi all,
SAP GUI for Windows 7.20 is now available for download on SAP Service Marketplace.
The new SAP GUI release comes with a number of useful new features:
- Support for Windows 7 operating system & Office 2010 package (32bit version)
- SAP Logon: Hierarchical organization of items in an explorer like view and a tree like view.
- SAP Logon: With release 7.20, an administrator can define a central saplogon.ini which can be merged into the local user specific saplogon.ini.
- Options Dialog: Almost all options have been merged into a new user friendly dialog that replaces Tweak SAP GUI and the old options dialog.
- Security Enhancements: A set of maintainable security rules which allow administrators and users to prevent unwanted access to the client PCs from SAP systems have been defined.
- Animated Focus Frame: Improved visualization of the focus and its movement across the screen.
- High Contrast Theme for SAP Signature Design: Improved visual design for users with visual impairments, based on the successful SAP Signature Design.
- Better organization of local data: Downloaded files, traces, scripts and other local objects are stored in different folders (roaming and local) according to Windows standards.
Besides this SAP GUI for Windows 7.20 is fully compatible with older SAP GUI releases.
Since SAP GUI for Windows 6.20 is out of maintenance since 1st of January 2011 and SAP GUI for Windows 7.10 is out of maintenance since 13th of April 2011 we recommend to start planning the upgrade to release 7.20 as soon as possible.
Best regards,
Frank

Hi all,
SAP GUI for Windows 7.20 patchlevel 1 is now available.
You may download it from the SAP Service Marketplace [here|http://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=LIST&EVENT=LIST&ENR=01200615320200014751&SWTYPSC=SPP&PECCLSC=OS&INCL_PECCLSC1=OS&PECGRSC1=WIN32&V=MAINT&TA=ACTUAL].
Best regards,
Frank

Add new font types to SAP GUI

Hi,
I'm trying to add new font types to SAP GUI to be available to edit smartforms and mail forms, but, after I do the upload in SAP system (by SE73 transaction)of ARIAL font, when I associate it to a smartstyle, what really appears with ARIAL name is a Times New Roman font example.
Greetings,
Nuno Moreira

Hi Nuno,
Maybe this question isnt corresponding with this forum. But I have a thread with the answer... look at
Re: Adding a new font for SAPscript/SMARTFORM output
Regards.
Manuel

Error in uploading a new logo

Hi
I am trying to upload a new logo to the system and when i ran the program RSTXLDMC i got the following error and the logo was not uploaded in the system.
Tif format error - No baseline TIFF 6.0 format .
I am in ECC 6 system .could some one explain the errror and what other options i have to load the logo.
Thanks
Anjali

Hi
I am seeing the similar post in SDN and some replies state the following.
Often this error occurs because the TIFF file you have has been saved with some form of compression. You need to open in a picture edit program and save as TIFF making sure options are set so there is no compression.
or check this link
Uploading TIFF files to SAP script Texts
Thanks
Viquar Iqbal

How to Upload the new logo on top of Navigation bar

Hi ,
I want to upload a new logo (company logo ) on top of Navigation bar . How can i do that...
1.Upload the specific image(logo) to the specific Skin---in SE80, but where should this new image I have to upload....how the system understand to pick this image.
Regards
Vijay

Did you check the help portal?
Skins - SAP Library
Example: Changing Logo and Navigation Bar Picture - Skins - SAP Library
Cheers!
Luis

Adding a new server in the menu of SAP GUI 640

Hello Everybody,
While adding a new server to the menu of SAP GUI 640 using Server Tab after entering all details like :
1] SAP System ID
2] Hostname where message server is running
3] SAP ROUTER :None
After filling all the above details and after pressing the Generate List Button I am getting the following error .Please help me to know why this error is coming and suggest a solutio for adding a new server to my SAP GUI 640.But I am able to add a new server using User defined tab but I want to add a new server using Server tab.
Below is error details which I am getting:
Error:service'sapmsSBX'unknown
Wed Jan 09 06:41:13 2008
Release 640
Component NI(network interface),version 37
rc=-3,module ninti.c,line 463
Detail NiPGetServByName: service 'sapmsSBX' not found.
Thanks and Regards,
Ashish Thakkar.

Hi,
check etc/services for sapmsSBX entry. If missing - add it (i.e. sapmsSBX 36XX/tcp - where XX is your instance no.)
Add an extra [Enter] after last line of etc/services.
Regs,
FS

Upload a new SAP GUI Logo.

Similar Messages

Maybe you are looking for