Upload Electronic Account Statement (FF.5)

Hi,
I have the following problem. Today I uploaded the Electronic Account Statement from yesterday and - my mistake - only a part of the Electronic Account Statement from today. Now I have the problem, to
upload the second part of the Electronic Account Statement from today. FF.5 accept only once each number of the Electronic Account Statement and day.
I hope, someone can tell me, what I can do now. Thanks.
Andreas Müller

An idea - the transaction FBRA is new for me!
But I will do now the following. I will manipulate the UMSATZ.TXT and AUSZUG.TXT from tomorow - I insert the missing position from today in the files for tomorow - change the bank statement numbers in this positions and update the AUSZUG.TXT. So I think, it will go.
But now a question to your comment: "Now we have a variant that stops the users posting immediately!". Can you tell me, what you have done. Thanks again.

Similar Messages

Down Payment in electronic account statement

Hello experts,
I have to involve down payment in electronic account statement.
We use the electronic account statement to book and balance automaticaly incoming payment from debitors.
But down payment requests from debitors (booked as noted items, special G/L indicator 'F' with transaction F-37 or VF01) aren't identified and automaticaly booked out.
However the noted items (special G/L indicator 'F') should be balanced and booked as down payment received (special G/L indicator 'A').
That isn't working.
In customizing is in line from posting rule already an F for special G/L indicator.
But it don't work for testing.
In addition I implemented the user-exit FEB00001 (EXIT_RFEBBU10_001).
So that I can define in this user-exit which posting rule should sap use, if it's a special G/L or not.
But it's very difficult to program because break-points don't really work in this user-exit.
Thanks a lot!

Hello
For each transaction code (MT940-BTC) you specify the corresponding interpretation algorithm.
For Orbian business processes this is almost always algorithm 015, as this enables the subsequent clearing on the interim accounts (per assignment number and SAPF124). The following business processes are exceptions to this:
Discounting an OC (No. 3 in the table)
Receipt (incoming payment) of an OC (No. 6 in the table)
For these you can use algorithm 001, for example.
Reg

Format file problem uploading electronic bank statement files FF_5 RFEBKA00

hello
I am facing a problem when uploading electronic bank statement files with the file format. The situation is as follows:
1- Electronic bank statement files are sent by FTP from the bank to a certain directory in AL11
2- we have developed a "z" program that just picks electronic bank statement files from AL11 directory and process them using standard FF_5 (RFEBKA00) program.
3- When processing some files had an error, when debugging we have verified that errors are caused by some "special" characters non Unicode as "®" (=Hex'AE') with UTF-8, a '#' is displayed.
SAP answers a question as follows:
AL11 is designed to display os-files (log-files, trace-files etc.)
from within the SAP-system for supporting purposes in order not to
logon to the os itself.
It was not designed to display any file-content in the system created
with any code-page.
AL11 opens the file in textmode with encoding option default, which
means UTF-8 in a unicode system and NON-UNICODE in the other case.
You cannot change this setting.
If you have the need to specify these options, depending on your files,
you can make a copy of report RSWATCH0 and customize the OPEN-statement
to yor needs.
On a Unicode system, the files need to be in Unicode format (UTF-8).
Eg:When you interpret a non-Unicode "®" (=Hex'AE') with UTF-8, a '#' is
displayed.
Case 1:
Who is creating those files? Are these files
1) created by you
2) are they written by a SAP application?
==>There are the notes 752835 and 747615 for cases like these.
In case 2) it may be that the application responsible for the file
download (not AL11!) should be the problem, considering note 752835.
There is also the possibility for you to convert the file to the correct format using our tool RSCP_CONVERT_FILE (note 747615).
System administrator has told me to copy standard RFEBKA00 program and modify the OPEN-statement but I am not agree because I think that the problem is when generating the files in bank's system and/or sending the files to SAP by FTP.
Does any body face a problem like this before? Any ideas?
Thanks a lot

Hello,
The files that are available in AL11 are in Unicode.
Can you convert them to text by using the following method and then try:
You must have mapped this directory and having access.
Right click on file
Open with: Microsoft Office Word
Then the pop-up comes: File conversion - bacs
Select Other encoding radio button
Then select "Unicode" from list
and say OK
Now the file is being opened in readable format:
File SAVE as PLAIN TEXT
Save the file in the same folder that you are referring to in AL11
Now if you try with this .txt file, it should work in FF_5
Thanks,
Ravi

How to convert electronic account statement to MultiCash format?

Hi,
Please provide me procedure for following conversions:
(1)How to convert electronic account(bank) statement(of Saudi Arabia country) to MultiCash format?.
(2)How to convert electronic account(bank) statement from MT940 format to MultiCash format?.
Thanks & Regards,
Seshagiri.

Hi,
Please provide me procedure for following conversions:
(1)How to convert electronic account(bank) statement(of Saudi Arabia country) to MultiCash format?.
(2)How to convert electronic account(bank) statement from MT940 format to MultiCash format?.
Thanks & Regards,
Seshagiri.

Unable to clear sub-ledger items on uploading electronic bank statement

Hi All,
The client is in Belgium & uses format BE for bank statements. in postprocessing of EBS (FEBA), there are a few items with a posting rule 0002 (for Eg) that need to be posted manually. The posting rule is as below:
0002 1 40 BE INTERIM 50 BE BANK ZR 1
0002 2 BE OUTGOING BE 50 BE INTERIM ZV 4
As you can see the posting type is 1 & 4. The user's contention is that this should knock off items in sub-ledger i.e., vendor & customer open items but the system is posting to the GL accounts that are assigned to the account symbols shown above.
My question is... Is it possible with such a posting rule to clear items in sub-ledger? If yes, is there any setting that needs to done to ensire that in FEBA, on manually trying to post the system should direct to the screen where you can enter the customer or vendor number & select open item?
Thanks,
Lakshmi

I found the answer in Customizing new G/L. thanks anyway.
Heiidi

Automatic Clearing & Electronic Bank Statement

Hi,
During EBS processing, open items are automatically being cleared but only based on amounts. I've configure in OB74 that criteria for clearing should be amount & value date. It seems that EBS does not read the settings in OB74? Where is the correct path to set this up?
Does EBS really allows upload of bank statement even if ending and beginning balance are not equal? Is there a way to control this?
Thanks,
Chaikaru

Hi Chaikaru,
OB74 is not the path for EBP processing. OB74 is used for account clearing in F.13 or F13E.
You need to go to the path:-
SPRO > Financial Accounting (New) > Bank Accounting > Business Transactions > Payment Transactions > Electronic Bank Statement
You need to define interpretation algoritham. Please go through the below one:-
OSS Note 494777 - Customer enhancements in electronic bank statement
OSS Note 597428 - El.accnt statement: Customer-specific interpret.algorithms
OSS Note 549277 - FAQ: Electronic account statement
OSS Note 414233 - Accnt statement:customer-specific interpretation algorithms
Regards,
Gaurav

Bank key vs Electronic Bank Statement

Hello,
What is recommended by SAP is to have bank key for house bank the same as SWIFT code. I have case now that bank from Turkey has TGBATRIS Swift code and the same i use as bank key. But when they have sent bank statement and i import it using FF.5 it looks like in field 25: (where the bank account is delivered) they provide this data ':25:277/6296649'. So 277 is bank ID and after slash / we have bank account ID. Problem is that error comes up when i have bank key TGBATRIS as no bank account 6296649 is found for bank key 277. So it looks SAP is recognizing first part 277 as bank key that should be customized.
Is there any way to use bank key as SWIFT and not asking bank to change bank statement format of field :25: ?
Thanks for info.

Look if you can get in the house bank this information in the field Alternative Bank Acct Number
If you have house bank accounts with identical account numbers and use the electronic account statement for these accounts, then you enter the internal key used by your house bank here (usually the account number with attached currency encryption). If you use the manual account statement, then you can freely assign the alternative account number. Using bank account number + currency code is, however, recommended

Electronic Bank statement - Configuration

Dear All,
Anybody have complete configuration steps for Electronic Bank statement. If you have plse send me .
Raj

Hi Raja
please go through the follwoing steps for configs
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
     - Create Account Symbols
     - Assign Accounts to Account Symbols
     - Create Keys for Posting Rules
     - Define Posting Rules
     - Create Transaction Types
     - Assign External Transaction Types to Posting Rules
     - Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
    - Search String Definition
    - Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
   a. setup all co codes for payment transaction - Customer and vendors
   b.setup paying co codes for payment transactions
   c.setup payment method per country
   d.setup payment method per co code for payment transaction
   e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI     (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
and furthur notes see the below site
http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/a6c52add1cb44a86ff77c175baf907/frameset.htm
if you feel it is useful award points by way of thanks.
nagesh

Electronic Bank Statement BAI file format

Hi,
I am trying to upload electronic bank statement with BAI file format. When I select the file and executed in FF_5, it is not giving any error. Nothing is happening. The same file I have used I was able to upload it. I am searching where it went. I have maintained complete configuration.
Then I have prepared a simple file on my own in text format, that simple file is working fine and able to upload.
Can somebody have any idea why it might have gone wrong?
Thanks in advance.
Ravi

all the file lines are filled with " in the beginning and at the end. Then I replace all those " values and I am able to upload the file. I am not sure how these " values are placed in the file.

Electronic Bank Statement and Bank Accounts change...Statement Upload

Hi,
I have an issue with electronic bank processing.
Currently my client is using A100 company code and bank account 123456 gl code 45000 and they are updating bank statements through electronic bank statement.
Now they have activated A200 company code and they want to use same bank account 123456 and gl code 45000 in new company code and the entire electronic bank statements need to be updated into A200 and A100 company code will exist in sap but client dont want to use this.
What customizations need to be done in SAP and how system will come to know A200 company code need to be updated when they update electronic bank statement next time?
Is there any specific customization in sap that shifts company codes and gl codes for electronic bank statement uploads?
What will happen to historic data when the same gl codes are used with different company codes?
Once the F110 is executed there will be batch job which will run to upload file...do we need to change anything here....
Jaya.

Hello-
Are you saying going forward you are are not going to use A100 and start using A200? If so, from an EBS config standpoint, all you would have to do is use the same transaction type and remove the assignment of old company code & bank account + bank key to the transaction type and enter the new assignment to new company code.
Next, make sure to create all the bank accounts and clearing accounts in the new company code (assuming all the config related to bank is completed).
This is it. When you upload using FF.5, it will look at the bank account number from the upload file and look for the company code.
Hope this helps.
Shail

BAI file clearing cheque outgoing sub account - Electronic Bank Statement

Hi,
I am facing problem with clearing the cheque when uploaded bank statement through FF_5 (electronic)
If I use the following file, there is no problem in clearing the cheque (this prepared by me for test purpose)
01,EBSTest,EBSTest,101005,0944,1,99,99,2,,,,,,,/
02,EBSTest,609242,1,101005,0944,GBP,,,,,,,,,/
03,0077503702,GBP,010,200000,,,015-100000,,,045-100000,,,/
16,475,100000,Z,,,Check #150000,,,,,,,,,/
49,100000,99,,,,,,,,,,,,,/
98,100000,1,99,,,,,,,,,,,,/
99,100000,1,99,,,,,,,,,,,,/
The following is the real file (where it is failing to recognise the cheque number)
16,475,52378,0,GB84197,0000000027827/
88,YOUR REF=027827,CHECK NO=00027827,REMARK=RPS BATCH 26390434 027827 SECTION 1
88, ITEMS 027827
I tested interpretation algorithms 11 and 13, but still not use.
Can you please tell how can I clear the items in sub account (cheque outgoing account) based on the cheque number when I upload the bank statement.
Any valid suggestions will be highly apprecicated.
Regards,
Ravi

Thank you very much for your answer.
I tested with leading exactly same as FCHN but still somehow it is not working. Changing the electronic bank statement manually may not be possible due to security concern. They the bank statement is week and it has high volume of entries.

Configuration / Uploading of Electronic Bank Statement Steps

Hi
I have confirgured the electronic bank statement functinality, I have used interpetaton alogrithm as 015, In Assign External Transaction type to posting rule, we have only two exteranal transaction 1001 for Credit and 1002 for debits in bank, we have assigned posting rule Z1 to external transction 1001 and Z2 to 1002.
I have received the following bank statement in multicash format.
Line Items File UMSATZ.TXT
Bank
Account
Statement Number
Value Date
Blank column
Text
Blank1 column
Blank2 column
External transaction code
Reference
Amount
Curr
Blank3 column
Statement Date
Header File AUSZUG.TXT
Bank
Account
Statement Number
Date
Curr
Opening Balance
Credit
Debits
Closing
Kindly advise the step to upload the above files and how the system will identify the reference column and external transaction from the statement to post based on above configuration.
Basically I want to ask that we are aware that bank statement have this column, but how SAP will identify the same and post.
Awaiting for early reply.
Best Regards
Mukesh Mokashi

Hi Srikanth
I have executed the test program, the system has posted three documents document pertaining to GL accounts as mentioned below:
1. G/L acct postings
Cash disbursement
00011 FB01 SA        001 40 215019      INR       30,000.00-
                                   002 50 215002      INR       30,000.00
         Document 25000037 was posted in company code 1000
Outgoing checks
00012 FB01 SA        001 40 215019      INR       31,000.00-
                                   002 50 215001      INR       31,000.00
         Document 25000038 was posted in company code 1000
Outgoing checks
00013 FB01 SA        001 40 215019      INR       32,000.00-
                                   002 50 215001      INR       32,000.00
         Document 25000039 was posted in company code 1000
Files created
LI file
          C:\Documents and Settings\10000058\Desktop\UMSATZ1.TXT
          Lines:                3
Stmt file
          C:\Documents and Settings\10000058\Desktop\AUSZUG1.TXT
          Lines:                1
2. For Customer Open Item it has show error as "(GLT2 001) Item category 04000 not allowed in accounting transaction 0200 /0001"
Point No.1
I am confused what system has performed and how the GL codes are picked for posintg for point no.1, further the message
shows files are generated, the file contents are blank.
Point No.2
Error for customer open item creation
Can you please explain the above points.
Best Regards
Mukesh Mokashi

Electronic bank statement upload

Hi SAP GURUS,
I have some doubts in ELECTRONIC bank statement.
After uploading the statement in FF_5.
How the open items will get cleared? and on based on which parameters it will get clear?
Where do we maintain these parameters like based on the my Assignemnt field and reference fields , header text. like
the parameters where do we maintain for clearing the open items.
Regards
Sai

Hi
Just check this settings
Fin Accing>Bank Accing>Business transaction>Payment transaction>ELE Bank Stat>Making Global Settings for ele bank Stat.
Assign Bank Accounts to transaction types.
Hope this will be help full
Regards
Arun Mulgund

Issue with electronic bank statement upload

Hi All,
          Presently I face an inssue in posting electronic bank statement upload (Tcode - ff_5).
The scenario goes like this.
         First we do payment to vendor using 'f110' transaction.Here the document currency is different from local currency.Let us say we paid 100 EBP i.e, approximately 177 USD.
After the payment we get statement from Bank (in this case BAI format).In the bank statement due to exchange rate difference the amount will not be exactly 177 USD but slightly different like 185 USD or may be 170 USD.
       At this point we have to upload this statement using transaction 'FF_5' to system.Here obviously the differential amount goes to the system ( 185 USD or 170 USD).
Now the issue is we have to post this difference amount like USD 8 or USD 7 to a specific GL account ( 11800 or any other GL acc number ).
The 'FF_5' transaction updates the tables 'FEBKO,FEBEP' by using the programs 'RFEBBU00',
'RFEBBU10'.There is an exit also like 'FEB00001'. We can put this difference amount in one of the fields of FEBEP table by using this exit.
   But the point I don't know is how to post this difeerence amount 8 or 7 USD to a specific G/l account ? I could not locate in the above program 'RFEBBU00' where the posting happens ?
Thanks for any help.
Vinod.

Hi Sharaad & Naga,
                     Thanks for the replies.One more doubt, Will I have to use these function modules inside the exit or do I need to change the sap standard program to incorporate these FM calls ?
Thanks
Vinod.

Electronic bank statement upload to SAP....?

HI experts,
plz can any body pass some inputs on electronic bank statement.
we have received the electronic statement from bank recently and want to upload it to SAP.
we try to use the TCODE: FF_5 to import the statement.
but in that tcode need to specify the statement file and line item files.
actually whatu2019s that files mean ..Where we have to generate those two files from the existed electronic bank statement wt we received fromt the bank.
and those file should be in which format...?
plz advise i have not worked on the electronic bank statement before....
i have done all the related configuration settings in the system... i have assigned the external transaction type MC ( multi cash format) to My bank Key in the config.
if u have any documentation and file formats please send i to me to sandhya.rani at issconsulting.net
thank you very much...
Sandhya Reddy.

Hi Sandhya,
For this you need to do a lot off customizing and testing, perhaps to imlement an user exit.
When you have activated EA-FIN you have more options.
The setup is different by country, bank, record format,.
Have a look in customing and click on help. There are some examples available.
SPRO: Financial Accounting /Bank Accounting/ Business Transactions /Payment Transactions /Manual Bank Statement
The first step is to look to your bank statements from the last year and write down all possible cases and how you post it. (Like customer invoice, bank transaction code XXX in the text you will found the invoice number, bank costs, interest, slaery payments,......)
Based on this you can set-up the rule's (customizing - User exit)

Upload Electronic Account Statement (FF.5)

Similar Messages

Maybe you are looking for