Upload Error, How do you identify the datasource in BI & ECC?

Hi BI Experts,
Hope you can help me on this.
We are using BI content to extract & model the data in BI. For the asset accounting infoarea, we had an unusual dataload. It should update around 10,000 records every day. In this instance there was 500,000 records & eventually the load failed when updating the cube.
I want to investigate why there were so many records. I hoped to check the datasource & check also ECC. But unfortunately I have no experience in data extraction, so I am not clear where to start.
Have you any suggestions on an approach to finding out why there were so many records?
Thanks very much
Michelle

Thanks very much for your repsonse Francisco,
When I choose RSA3 I am faced with settings screen which has automatically populated as follows;
Request ID - TEST
Data Records/Calls 10
Display Extr. Calls 10
Update Mode F
Execution Mode,
Debug not ticked
Auth Trace not ticked
In the Selection Table below, I wish to choose just Period 6, 2011. As this is the restriction on the infopackage.
I have tried to run this with various entries but it doesn't seem to return data, what should I enter in these selections please,
Thanks Francisco,
Michelle

Similar Messages

How do you identify the Logical system in start routine of a transformation

My scenario is this. I have five r3 systems that I am extracting from. In the start routine of the transformation from the r3 data source to my data store I am going to delete data and I need to know the source system id. How do I identify the logical system or source system id in the transformation. Is there a system field that contains this information. I do not want to hard code the source system id in the routine.

hi
have a lool at tables rsreqdone and rsbkrequest with a join you should be able to determine the source.
regards
Boujema
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).
Edited by: Boujema Bouhazama on May 9, 2008 12:04 AM

How do you Identify the last callers number?

In my contacts I may have a contacts with more than one number under their name. When ever I get a missed call from this person the N900 does not list the number the missed call was received from, but instead just lists all the numbers from the contact leaving me to hazard a guess at which number the missed call was from. I find this quite infuriating as this was a feature that I could rely on when I had my N95 8GB.
Is there any solution to this problem?
Regards
G5moni

if you are using the latest release of firmware, pr1.2 (you can check this by going to settings/about product and looking at the version that would say 10.2010.19-1.002) then when you miss a call, if you tap on that missed call ID, then it shows only thenumber that they called you from.
and if you tap on the picture icon, then it will slide up and show all thenumbers that the contact has, and if you tap the icon again, it will slide back down to the number they called you from.
if you do not have the pr1.2, then i would update your handset.

How do you Identify the fulfilling organization on an order?

Can it be identified by the organization_id (or even attribute_category) in the table mtl_system_items_b? Or is that simply the organization where the distribution center (or warehouse) is located? Or is this something that is different within different installations of Oracle?
The problem is our orders are credited to one organization but the actually fulfilling might be done by another. The reason we do this is to have a single customer facing entity. So if you wanted to know where that order actually originated it can be challenging.
Any help is greatly appreciated.
Chad

>
There is a shipping org (basically the warehouse) but it is shared by multiple orgs. So you could have one organization that took the order, it would be shipped from that shared organization, and booked to the customer facing organization. I was hoping to trace the order back to the original organization.
>
Sorry but I am still not clear. Can you give real example and why is it setup this way? How many inventory orgs do you have? Are they under the same OU?
When you say organization, do you mean inventory organization or you mean a company/OU?
I can understand that the physical warehouse is shared by different "orgs". But is the inventory shared too? Or do each orgs maintain their own inventory?
Sandeep Gandhi

How do you identify the computers included in your home share

I want to include my laptop on homeshare but it say
s I already have 5 computers on homeshare.. HOw do I find out whivh ones they are so I can delete one.

Try this. Launch iTunes and select 'View My Account...' in the 'Store' menu.
On the 'Account Information' screen you will see a section called 'iTunes in the Cloud.' Within that section you should see the category 'Manage Devices' that will tell you how many devices are associated with that iTunes account.
Note: You can have up to 10 devices associated with an iTunes account but only five of them can be computers. Apple TVs do not count against the limit.
Click on the link on the right hand side that is labelled 'Manage Devices >' You will now see a list of the devices that are associated with that iTunes account. On the right-hand side you will find 'Remove' buttons for each device that will remove that device from the account making room for you to add another.

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

Right-click the track in your library, Get Info, go to the Info tab, and type in the correct information. When you are done, click "OK."

How do you fix the itunes R6034 error

How do you fix the R6034 error with itunes?

A few more details....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

You have created a link to another part of your book but how do you get the reader back to the original page?

Using iBooks Author to make a book you have created a link to another part of your book but how do you get the reader back to the original page?

Asking me to be verbore is a dangerous thing :-)
When you eneter information into iTunes Producer for uploading, the info must match what is in the internal metadata. In this case, the book is called Mississippi, but in iTunes Producer it is spelled Misssissippi. There is an extra "s". This will cause an error.
- Fabe

How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
Thanks

Hi,
This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
Benoit Lecours | Blog: System Center Dudes

Same question for the "2 iPhones in one account".....How do I change the name. My iPhone is showing my wife's iPhone name when I am syncing it. Why is that? I know about using one iTunes account....But how do you change the name w/o erasing your data?

Hi....How do you change the name? When I sync my iPhone, it shows my wife's name on it?

Unfortunately it is not doing it....
Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update.

How do you change the resolution of a Photo?

In iPhoto, how to you reduce the resolution of a photo in order to reduce the file size? This makes it easier to email because of the smaller file size?

Let's say I have a photo with a resolution of of 3264 x 2448 pixels.
Tat's not a measurement of resolution, that's the dimensions (length x breadth) of the photo, expressed in pixels.
Resolution is a vague term most used to describe the density of pixels - i.e the pixels per inch.
1) I want to edit it and reduce the resolution to 1024 x 768 pixels.
No, you want to reduce the dimensions of the image to 1024 x 768
2) Do this within iPhoto without using the export feature thereby keeping the edited photo in iPhoto?
You can't. It can only be done on export. Why? When you edit a photo iPhoto preserves the original and makes a copy of the file containing the edit. As most people reduce the dimensions, file size or resolution for a specific purpose (to upload it for instance), it's thought best to export it, upload it nd then trash it.
Of course, you can simply import the export back in, if you have a burning need of it in iPhoto.
Regards
TD

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben

How to find out the Datasources for particular data in R/3

Hi ,
I want to retrive the data from R/3 tables which are VEKP, INOB ,AUSP , CABN .. these all are ACCOUNTABILITY details... so, how can i find the BI content DataSources are available or not... if available means..
for these ACCOUNTABILITY details.. i want to know the BI content CUBES and ODS's and Datasources... so, can any one give me the names of datasources.. or cubes.. and how can we find out those names...
helpfull answers will be highly appriciated..
regards
Babu

The best way to go for this is to check the table RSOSFIELDMAP in BW.
Put in the values below and you would see which field of R/3 maps to which info object in BW. If nothing is mapped that means there is no infoobject mapped yet to that field. In this case you need to hunt in the BC or create your own info object.
Soursystem = your r/3 sourssytem
version = A
field = your r/3 field name
Once you get the datasource name, i am sure you can figure out the corresponding infosource and then the cubes and ODS linked to that infosource. ( right click infosource - - show dataflow)
Hope this helps.

How do you open the DVD tray on a K430 without using Windows Explorer?

How do you open the DVD tray on a K430 without using Windows Explorer? I can't find a button on or below the door. Am I missing something? Additionally, will the K430 boot from a DVD/CD if it finds one in the DVD tray instead of the hard disk? Please help. Thanks.
Solved!
Go to Solution.

hi penguin247,
Regarding your questions:
1. Can you try to press the eject symbol on the DVD bay and observe if the DVD tray comes out.
Link to picture
2. By default, the HDD is set as the first boot device and the ODD second on the K430. You will need to change the boot order or continuously tap F12 during POST to boot from the ODD (assuming you have a bootable media inserted).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Upload Error, How do you identify the datasource in BI & ECC?

Similar Messages

Maybe you are looking for