Upload file in Webserver using Flex

I am currently working in Flex and in a requirement I need to upload a file from local file system to a webserver. The webserver I am using is Apache Tomcat web server . I tried doing that using FileReference class but got IOException when tried to call upload function. Anybody know how to upload
file in Flex please help me out. Its very urgent for me.
Thanks
Purna

You can't upload files to the server directly by using only Flex. You'll need a server-side script that can handle the actual writing of the data. I posted an example on a simple PHP + Flex file uploader back a while, you can take a look at it here: http://blog.wisebisoft.com/2009/01/28/simple-flex-file-uploader/ Good luck.

Similar Messages

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

Upload file in KM using webdynpro without portal.

Hi Experts,
Can we upload files in KM using webdynpro without portal ? If it is possible then please give the whole step by step process? Please reply....its urgent...
I am very new in webDynpro...
Thanks
Regards
Nutan Champia

Hi
Go through this
<a href="/people/rohit.radhakrishnan/blog/2005/05/27/uploading-files-to-km-repository-using-webdynpro-apis
also you can see this
<a href="/thread/452368 [original link is broken]
Regards
Abhijith YS

After uploading file in BLOB using webutil file on system locked?

I uploaded file in BLOB using webutil upload utility. But after uploading it locks the file and i cannot delete the file unless i close the iexplorer window.
Is there any way to unlock the file and delete it with out closing the application(iexplorer). If any body knows please reply.
Regards,
Muhammad Qazzafi

can you post the statements, which you use for the upload ?
thx
Gerd

Uploading files to SAP using HTML5 /AJAX/Gateway media links with real-time progress bar

Hi All,
Check out the blog post 'Uploading files to SAP using HTML5 /AJAX/Gateway media links with real-time progress bar'
Uploading files to SAP using HTML5 /AJAX/Gateway media links with real-time progress bar
Regards
Prabaharan

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Which correspondents fine with the
device "hw:0,3"
in my mpd.conf alsa section.
Also sound worked fine withh this config before I started installing ffmpeg-svn and alikes
hokasch:
I tried changing the mixer to "Master" but that did not change much.

How to open pdf files in browser using flex

hi,
my project is having a Document explorer wchich contains pdf
files,iwant to open it in the browser.can any one tell me how to
open pdf documents using flex programming(i tried with different
thing like swf's but my client wants only pdf formatt).

Another option is by calling a JSP page. This example will
open a pdf file into a new browser without displaying the download
"save" prompt.
Function to call the JSP:
private function downloadFlyer(event:Event):void {
var jspLink:URLRequest = new
URLRequest("jsp/downloadpdf.jsp?fileName=Fundraiser_flyer_2008.pdf");
navigateToURL( jspLink, "_blank" );
JSP code:
<%@ page errorPage="error.jsp" %>
<%@ page import="java.io.*" %>
<%
//Get the parameters
String downloadFileName=request.getParameter("fileName");
String fileName = application.getRealPath("/downloads/" +
downloadFileName);
File file = new File(fileName);
if (!file.exists()) {
throw new IOException("File does not exist.");
// Get the size of the file
long length = file.length();
// You cannot create an array using a long type.
// It needs to be an int type.
// Before converting to an int type, check
// to ensure that file is not larger than Integer.MAX_VALUE.
if (length > Integer.MAX_VALUE) {
throw new IOException("File too big.");
response.reset();
response.resetBuffer();
response.setContentType( "application/pdf" );
response.setHeader ("Content-Disposition", "filename=" +
downloadFileName);
//Prevent the Java error: "getOutputStream() has already
been called for this response"
out.clear();
out = pageContext.pushBody();
InputStream in = new FileInputStream(file);
OutputStream output = response.getOutputStream();
try {
int curByte=-1;
while( (curByte=in.read()) !=-1){
output.write(curByte);
} catch (IOException ioe) {
ioe.printStackTrace(System.out);
} finally{
output.flush();
in.close();
response.flushBuffer();
%>

How to upload images to server using flex and blazeDS

Hi All,
Could you some help me, regarding uploading two images while click on the upload button. i am have two browse buttons and two upload buttons. i am able to select the image, while click on the browse button. but i am unable to upload the image, while click on the upload button. like this, i have to do in my application.
if some help me i will appreciate , its very urgent.
Thanks
venkat

When uploading a file, I use a byte array as a temporary buffer..
So, you should then be able to store the byte array in the
database as binary data.
example>
//Temporary Buffer To Store File
byte[] tmpbuffer = new byte[860];
//Some Code To Upload File...
//File Should Now Be In Byte Array
//Get DB Connection and execute Prepared Statement
Connection con=//GET DB CONNECTION;
String sql=insert into TABLE(page) values(?);
PreparedStatement ps=con.prepareStatement(sql);
ps.setBytes(1,tempbuffer);
ps.executeUpdate();
//Close PS and Free DB Connection
..... and this method looks like you dont even have
to store the file in a byte array, you can just give
it the input stream.
ps.setBinaryStream(int, inputStream, int);
You may have to make several attempts at this. I have
uploaded a file and temporarily stored it in a byte array,
but have never from there stored it in the DB as binary
data.. but this looks like it'll work.
Good Luck!

Problems with uploading file to database using FND_GFM

Hi
I'm having some problems uploading files to the database in apps 11.5.9
As various sources/documents tell me, using the standard FND_GFM / FND_FILE_UPLOAD packages of APPS should transfer an uploaded file into the FND_LOBS table, but some reason it doesn't work. I copied and altered the FND_GFM.upload_confirm function to try and figure out why it doesn;t work and it looks like the file to be uploaded does not appear in the defined table (FND_LOBS_DOCUMENT).
The following DAD is defined (with hidden password and servername to prevent abuse ;)):
[DAD_oes_s]
connect_string = oes_s
password = ****
username = APPS
default_page = fnd_web.ping
document_table = APPS.fnd_lobs_document
document_path = docs
document_proc =
upload_as_long_raw =
upload_as_blob = *
reuse = Yes
connmax = 10
pathalias = fndgfm
pathaliasproc = fnd_gfm.dispatch
enablesso = No
cgi_env_list=SERVER_NAME=***,REQUEST_PROTOCOL=http,SERVER_P
ORT=***,HOST=***
input_filtering = Yes
stateful=STATELESS_RESET
And I'm using the following code to generate the upload-file page
CREATE OR REPLACE PROCEDURE XX_ITRIS_HelloWorld AS--(file IN VARCHAR2) AS
     access_id_v varchar2(1000);
     BEGIN
          htp.htmlOpen;
          htp.bodyOpen;
          htp.formOpen('http://***/pls/oes_s/fnd_file_upload.uploadcompletemessage', 'GET', null, 'multipart/form-data');
          htp.formFile('file');
          access_id_v := fnd_gfm.authorize(null);
          htp.formHidden('access_id', access_id_v);
          htp.formSubmit();
          htp.formClose;
          htp.line;
          htp.bodyClose;
          htp.htmlClose;
     END XX_ITRIS_HelloWorld;
Can anybody point out what is going wrong?

You said you are uploading XML file whereas in the TSQL you have assign as text file i.e @SourceFile = 'test.txt'. Are you sure that you are copying XML file ? What is the size of the source file "test.txt" ? I am sure it is 0 KB. That is what you
have found in FTP site.
Regards, RSingh

Upload files into apex using plsql

i use apex upload option to upload files in to flow_files. Now it has to be deon via PL/SQl process. Via PL/SQL Process the files has to be uploaded on to apex application flow files tables .
the data input to my application come not from same apex another but from extenal source via plsql procedure.
is it possible ?
thanks
Raj

Just for completeness ...
Got this to work, but it's a pl/sql issue as opposed to an APEX issue.
Anyway, if anyone needs to have the ability to read multiple files then a quick easy way to do it (as lomg as they know the file names that will be read), is to create a directory on the database which points to the actual harddrive on your PC, then create a table (called an external table) and read from that external table as if it was an actual database table ...
1 - Log on as sys and grant CREATE ANY DIRECTORY to whatever user you are logging in as (assuming you are not using sys to create apps)
2 - Create a directory e.g....CREATE OR REPLACE DIRECTORY GB_TEST AS 'c:\gbtest';
3 - Create an external table as ...
CREATE TABLE gb_test
(file_name varchar2(10),
rec_date date
rec_name VARCHAR2(20),
rec_age number,
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY GB_TEST
ACCESS PARAMETERS
RECORDS DELIMITED BY NEWLINE
FIELDS TERMINATED BY ','
LOCATION ('data1.csv','data2.csv','data3.csv','data4.csv')
PARALLEL 5
REJECT LIMIT 20000;
That's it then ...
select * from gb_test
where file_name = 'xxx'
will return all the data where the file_name = 'xxx'
very easy to use.

Can't upload files in Firefox, using flash uploader. Already reinstalled flash, works ok in Chrome.

I have a website where I can upload files to the site's server utilizing Flash - I have the latest Firefox and the latest Flash plugin (uninstalled and reinstalled). But the upload is failing - I only get an "Unknown I/O message. but only in Firefox - Works ok in Chrome. I have already run the Adobe uninstall/reinstall process, and I have also tried running Firefox in Safe Mode and the problem persists.

Hi Bilinbaja,
I am not sure if you are using FTP to upload the files, however this error can sometimes refer to a hardware issue. Please try to toggle the hardware acceleration by right clicking on a item using the flash plug in and selecting settings.
Please let us know if this improves the performance as well as if this also happens on other computers, or if it still happens after you delete cache and cookies. Each browser has its own cache, Firefox's cache may also be longer. [[How to clear the Firefox cache]]
Did this help? We look forward to your reply.

Upload file into KM using Web Dynpro ABAP

Hi, I'm looking at converting an existing Web Dynpro Java application to a Web Dynpro ABAP application. However, I cannot find how to upload a file and store it in the Portal KM repository using WDA. I have been able to do it successfully using WDJ. Any help on how to do this would be very much appreciated. Thanks.

Hi, I'm looking at converting an existing Web Dynpro Java application to a Web Dynpro ABAP application. However, I cannot find how to upload a file and store it in the Portal KM repository using WDA. I have been able to do it successfully using WDJ. Any help on how to do this would be very much appreciated. Thanks.

Unable to upload Files to child site collection using REST

Dear All,
I referred this article http://www.shillier.com/archive/2013/03/26/uploading-files-in-sharepoint-2013-using-csom-and-rest.aspx for uploading documents to SP Document Library and it works fine for any document library under the root site collection(
for example "http://<server name>/Shared Documents" but when i upload the same document to one of the sub site collection created using Managed Path( the site collection path is "http://<server name>/files/Case" and the library
name is "records") it fails and i get below error:
The security validation for this page is invalid. Click Back in your
Web browser, refresh the page, and try your operation again, Error Code -2130575251 Microsoft.SharePoint.SPException"
Any help suggestion to resolve this? I've almost tried everything to resolve this issue but no luck.. appreciate any help
for this..
Regards,
Vishal

Hi,
According to your post, my understanding is that you had an issue uploading files to subsite using REST.
I had made a simple code demo below, it will upload a file to Document Library after you make your selection with the File control.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
function uploadFile(){
//alert(2);
if (document.getElementById("file").files.length === 0) {
alert('No file was selected');
return;
var parts = document.getElementById("file").value.split("\\");
var filename = parts[parts.length - 1];
var file = document.getElementById("file").files[0];
uploadFileSync("http://YourSite", "Documents", filename, file);
//Upload file synchronously
function uploadFileSync(spWebUrl , library, filename, file)
//alert(3);
var reader = new FileReader();
reader.onloadend = function(evt)
if (evt.target.readyState == FileReader.DONE)
var buffer = evt.target.result;
var completeUrl = spWebUrl
+ "/_api/web/lists/getByTitle('"+ library +"')"
+ "/RootFolder/Files/add(url='"+ filename +"',overwrite='true')?"
+ "@TargetLibrary='"+library+"'&@TargetFileName='"+ filename +"'";
$.ajax({
url: completeUrl,
type: "POST",
data: buffer,
async: false,
processData: false,
headers: {
"accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val(),
"content-length": buffer.byteLength
complete: function (data) {
//uploaded pic url
console.log(data.responseJSON.d.ServerRelativeUrl);
error: function (err) {
alert('failed');
reader.readAsArrayBuffer(file);
</script>
<input type="file" id='file' onchange="uploadFile()"/>
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Jason Guo
TechNet Community Support

Need to send mail & upload files using JSP

hi, got a lot of issues,.. just starting out as a developer.. so here goes.
1st Need to send mail & upload files to server using JSP(tomcat).. an example to demo it would be nice.
thanx in advance

Look at this for email:
http://forum.java.sun.com/thread.jspa?forumID=45&threadID=285950
and go to:
http://servlets.com/cos/
for a package to upload files.

Error while Uploading File using BLOB

Hi All,
I am trying to upload file into Database using simple JHeadstart generated screen for a table with a column having BLOB attribute. Wile inserting, I get this error message.
JBO-25009: Cannot create an object of type:oracle.jbo.domain.BlobDomain with value:oracle.adfinternal.view.faces.webapp.UploadedFiles$FixFilename@1930089
Any help would be appreciated..
Mamun

The problem you're getting is because the af:inputFile component does not support uploading into columns other than OrdDoc, OrdImage, OrdVideo types.
I think you would need to implement the interface oracle.adf.view.faces.webapp.UploadedFileProcessor in a custom class which would
handle the file upload and configure it in the
adf-faces-config.xml file e.g.:
<uploaded-file-processor>packagename.FileUploadProcessor</uploaded-file-processor>
Someone correct me if I'm wrong, as I haven't tried it out myself yet.

Powershell: How do I upload files with metadata from a manifest file?

I am using the script from this blog to try to upload files into SharePoint, using a manifest file to specify the metadata associated with each file. Right now, the script works, but is not populating
the metadata from the manifest (xml) file. When I write the $metadataManifest variable out to the console, I get the contents of my xml file, so the code is reading the file when it should. However when it gets to the line in bold ($metadataManifest.Columns.Column),
it does not go into that block...it just skips on to checkin the file. Again the $metadataManifest variable shows all the content in my xml manifest file. Here is what the script looks like...
#Get web and document library objects
$web = Get-SPWeb "http://companySite"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "C:\PowerShellScripts\Manifest.xml"
$LocalPath = "C:\Upload\Test Upload\My Upload Directory\"
if ($ManifestFilePath)
$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
#Walk through manifest XML file and configure column values on the file
$metadataManifest.Columns.Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
And here is what the manifest file looks like...
<?xml version="1.0" encoding="utf-8"?>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>9876</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data2</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More more Data</Value>
</Values>
</Column>
</Columns>
I can't figure out what am doing wrong...why my script is not iterating through the manifest file to upload the document along with the metadata. I would really appreciate any help. Thanks

Hi Spawn,
Name should not be a problem.. I will probably post you the entire code (I modified it to meet your goals for having multiple column xml nodes as well)
For the code snippet below:
a. In powershell all my changes will have ## prefixed comments
b. in XML I have changed one column name to "Name" to replicate your case and also added a parent node for making the xml well formed.
and the SharePoint output
Please see the code below
$web = Get-SPWeb "http://intranet/sites/test"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "D:\Manifest.xml"
$LocalPath = "D:\UploadPath\"
if ($ManifestFilePath)
##read the xml file as an xml object
[xml]$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$counter=0
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
## ensure we pick the corresponding node in the columns xml (first file, first xml node, second file - second node likewise)
#Walk through manifest XML file and configure column values on the file
$metadataManifest.FileData.Columns[$counter].Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
##increment the counter to read the next xml node
$counter++
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
and the xml file
<?xml version="1.0" encoding="utf-8"?>
<FileData>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Third File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fourth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fifth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
</FileData>
Thanks and Regards,
Partha
AvePoint

Upload file in Webserver using Flex

Similar Messages

Maybe you are looking for