Upload filter criterias in selection pop up
Hello all,
in Bex Analyzer it is possible to upload an txt-file in order to enter filter values in the selection pop up screen which is very helpful in case of e.g. a lot of material numbers etc.
Is there also an way to upload filter values via txt-file when you running the query via web?
Any help would be great.
Best Regards,
Stefan from Munich/Germany
Hi,
If you have any logic for restricting the materials say material type or Material group etc. then you can create a query on material master data and use this query as a input in you other query by creating a replacement path variable on material.
what will happen is the first query on material master data will run for the restiction in that query and the list of material numbers based on the restriction will become the input for the main query by using a replacement path variable on material.
Assign points if useful
Regards
Venkata Devaraj
Similar Messages
-
CRM 7.0 = ECC 6.0 Upload: Filter criteria for BUPA_MAIN
Dear Experts,
concerning filtering of BUPA_MAIN in CRM 7.0 => ECC 6.0 Upload we have already learned from SAP (to our surprise) that the only way is to redefine publication BUPA_MAIN as "simple intelligent" (Standard is simple bulk). BUPA_MAIN as "simple intelligent" offers a couple of fields (e.g. partner_no, is_customer) which can be defined as filter criteria.
We have the requirement to filter by a bp status field which is not part of this set. By the way, we expected the filtering in object management (TX R3AC1, filters are only valid for ECC=>CRM Dowload) or at least in the TX CRMC_BUT_CALL_FU by registrating a ZFunction module in CRM outbound for BUPA_MAIN. Under certain circumstances the later leads to errors in the subsequent middleware processing.
Has anybody a similiar requirement or does face the same problems?
Thanks for your help.
Regards, MarkHi Mark
Please put this request in the correct forum of CRM Middleware.
I am sure your will get the right help from the middleware experts.
Regards -
Passing Filter criteria parameters to drill-down reports
Hi,
I have a scenario, where my base report prompts a filter criteria for date range (from & to date) based on this criteria, I populate my base report with data's.
Suppose if i have a drill-down, can i make use of the filter criteria value selected in the base report and pass the same value to my next-level drill-down report as criteria.
Please let me know if this is possible. Also, let me know if there is any alternate approach available to achieve the same.
My environment details are provided below.
BAM (11.1.1.3)
Report: Summary crosstab
Any help would be greatly appreciated.
Thanks & regards,
DKHi pypawar,
Thanx for ur reply.
We are not using heirarchical drilling in our case, we are using another report for drill-down.
I will give some more background for this issue.
We have a scenario where we used the date filter for getting the from and to dates based on which we display our Master report (cross-tab).
Further, when drilling down from the master report to child report(which uses the same dataobject as master); we are not able to pass the dates input that were provided in master report as filter criteria.
While assigning parameters in the drill-down for the child report, we are not able to find an option to pass the date value selected in the master report to child report for filter criteria.
In an alternate approach, what we did to resolve the above issue was to pass the primary key fields of the data object while drill-down. But while passing primary keys, we realised there are cases where large number of values are getting passed as filter criteria to child reports and in some case it fails since there large number values getting passed as filter criteria.(in our case the chance of this value could be few 100's to 1000's). You can find details for this error in CACHEEXCEPTION during drill-down in BAM reports
Please let me know if this is possible. Also, let me know if there is any alternate approach available to achieve the same.
Any help would be greatly appreciated.
Thanks & regards,
DK -
Filter in query result table not populated by criteria previously selected.
Hi Experts,
I'm currently working on the the Upgrade of our BW production line from
release 3.0b to 7.0:
Configuration of target system
BW system : Release 7.0
BEx Analyser : Release 2004s, Support Package9, Patch 1, Revision 321
Sap Gui 6.4
We're especially trying to check the non-regression of the non-converted queries in the new system (release 7.0).
And we get the following issue: After having selected the selection criteria in the selection window, the reminder of selected criteria is not done in the filter part of the target query result. Is it a normal behavior or not ?
Indeed, in the previous system configuration (BW 3.0b), the user is accustomed to seeing just above his result table the selection criteria that he had previously filled in in the selection window.
Please find herewith an example describing the problem.
Thanks in advance for your help.In order to be more clear, hereunder an example:
- I have a field untitled "Business Division"in the selection window.*
- I fill in this field with the value "OND"
- I execute the query with this value for this field.
- The query result correclty appears.
- I click on the "Filter" button to display the Filter table with the columns "Navigation pane" and "Filter criteria".
- In the "Navigation pane", there is the field "Business Division".
- For me, the corresponding "Filter criteria" should be the value "OND", but nothing is displayed...
Thanks in advance foryour help.
Regards,
Steph -
Filter criteria in ALV report not working
Hi,
In ALV report , when i click on filter button , it does not filter the report according to the filtered criteria. this happens in the cases where the selection criteria is a lengthy field. when i debug after the filter criteria it goes into standard function.
i am using REUSE_ALV_GRID_DISPLAY
is there any way in which i can correct this?
thanks,
Amit
nullchk this useful thread
Re: ALV problem (with filter use) -
Hi there,
XSLT List View displaying all the list items within the Document Library. In order to implement the Search functionality within Document library out of box "Text Filter" web part is configured as explained below. The solution is similar to
the one suggested at
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=77
"Text Filter" Web Part added to the page.
Filter Criteria (i.e., XSLT List View columns) added to the XSLT List View where the filter parameters take the input from the "Text Filter" Web Part .
3. Both Web Parts (XSLT List View and the Text Filter) are connected.
When the search criteria is entered into the "Text Filter" Web Part, it is passed to the relevant Columns of the XSLT List View and the documents (List Items) that match the search criteria are shown within XSLT List View.
Search functionality working as expected.
Query: Selecting the "Export to Excel" icon from the ribbon generates the excel spread sheet with no data except Column Titles from the Document library. In the investigation it is
found that adding the 'Filter Criteria' on XSLT List View is causing this bug. When the Filter Criteria is removed, then "Export to Excel" functionality is working as expected.
But it is mandatory to add "Filter Criteria" to implement the search functionality with in the document library.
Help: Help/input appreciated on the work around to get the "Export to Excel" functionality work when the "Filter Criteria"
exist on the XSLT List View.
Regards,Once again thanks very much for your help Scott. very much appreciated.
In the investigation it is found that removing the 'Filter Criteria' on XSLT List View makes the "Export to Excel" functionality work. But the 'Filter Criteria' is mandatory to get the 'Document Search' functionality.
I think that due to technical limitations it should be concluded that 'only custom development can make all work, no code solutions using the SharePoint Designer can meet all the requirements.
If you can think of any alternative solution that could help in resolving the current issue or fix the issue without any custom implementation please inform. Otherwise this issue would be marked as resolved with your suggested response.
Regards, -
Issues with Search Filter Criteria Button in Search Help
Hi ,
I have applied an elementary search help to a select option and this help is having four fields. The search help works fne and all the four fields are visible when i do a F4. Now , if i want to restrict the number of entries shown (the number of entries are huge) by clicking the "Search Filter Criteria" button , i dont see any of the four fields using which i can restrict the data . Do we need to do any configuration for this ??
Regards
MayankHi,
in that search help itself you have a option called maximum number of hits, there is a impact if you restricted also.
Thanks & Regards,
Srinivasan.R -
Filter Criteria in Value Help for InfoObject
Hi,
Is it possible to remove the value from Filter Criteria. When I use F4 for a Field (in Screen) , its showing a poup window (Value Help for Info Object) with some personal values. When I click "More Values" option its showing the General Value List, where I can see the Filter Criteria. When I click "Show Filter Criteria", its showing the Criteria with a Value (This value is coming from the field(Screen) from where I am coming). is it possible to avoid of passing value from my screen field to Filter Criteria ?
Thanks
SrinivasMurugan,
I really hope that the moderator do not remove my points for this!
WebDynpro ABAP Select-Options and OVS Help.
How to Achieve OVS Search Help in Select Option in Web Dynpro ABAP
How to Use OVS Help For Multiple Input Fields in Select-Options.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/707f0d73-94f0-2d10-97a2-a3776e2118d8?QuickLink=index&…
Using Select Options in a Web Dynpro(ABAP) Application
Regards,
Ashvin -
Set filter criteria on page 1 for page 2 OData model - "best practice"?
Hello, I have a problem with an app - where I want to filter data on a second page, based on settings from the first page. I use an OData model.
The collections on both pages are not related in terms of "navigation" properties, that is my problem and I can not change the data source...
So I am looking for ideas/best practices to solve this because sometimes my filtering doesn't work... the following problem occurred: Request aborted
I have a page with a sap.m List with items="{/tabWorkPlace}" and and a local JSON model where I store relevant data during the app lifecycle.
handleListSelect - first page
var context = evt.getParameter("listItem").getBindingContext();
var dataModel = sap.ui.getCore().getModel("dataModel");
var workplace = context.getProperty("WORKPLACE_ID");
dataModel.setProperty("/WORKPLACE_ID", workplace);
this.nav.to("SubMaster", context);
The general App.controller.js handles the nav.to function:
var app = this.getView().app;
var page = app.getPage(pageId);
if(pageId == "secondPage") {
page.getController().filterData();
And the controller of the second page:
filterData: function() {
var oModel = sap.ui.getCore().getModel("odata");
var dataModel = sap.ui.getCore().getModel("dataModel");
var workplace = dataModel.getProperty("/WORKPLACE_ID");
var items = this.getView().byId("list");
var oFilter=new sap.ui.model.Filter("WORKPLACE_ID",sap.ui.model.FilterOperator.EQ,workplace);
items.getBinding("items").filter(oFilter);
I don't write this code into the onInit() or beforeRendering() function, because they are called only once and I am navigating back and forth between the two pages, because the pages are created only once and "just" the data is changed.
The desired page looks like this - with an other collection bound to it:
<List
id="list"
select="handleListSelect"
items="{/tabWorkstep_Status}"
>
But when I call it - then the request gets aborted:
The following problem occurred: Request aborted
But despite the fact the Request is aborted, the list on the second page is filtered!
The filter criteria for the model works when I type it into the browser with URL. Maybe this fails because the data binding for the list didn't took place at this phase?
I have this pattern (filter criteria on one page and result on the second page) more times - (and I think a better data model would be better with navigation properties would be better, but I cannot change it)
But at another constellation the filtering doesn't work - same error... the following problem occurred: Request aborted
I also don't want to change the pattern (page 1 to page 2) into popup lists or this fancy new filtering possibilities because it is not suitable for my use case.
Is there maybe a more elegant solution - because sometimes filtering works, sometimes don't..., do I have an error in my solution (general approach)?
Many thanks for any input!
BR,
DeniseHello, yeah you are right, but it works without the odata> stuff because of this in App.controller.js:
var uri = "http://localhost:32006/JsonOdataService.svc";
var oModelMS = new sap.ui.model.odata.ODataModel(uri);
sap.ui.getCore().setModel(oModelMS, "odata");
oView.setModel(oModelMS);
So my question is - how to navigate from one page to another - and on the other page first bind a collection to a select and then when selecting bind certain elements (a textfield) to the selected filtered entity.
The stuff with context and binding won't work, because the two Collections don't have a navigation/association property between them...
So for example:
page1
select a list item with property color: red and year 1985. Press one of the buttons and pass this criteria to another page.
page 2:
show a dropdown box with all car names which fullfill this criteria, and when one car is selected, then display the data for THIS car in several text fields.
This is not a master->detail navigation example, because on page 1 i select certain criterias, and then with buttons I navigate to several pages with those criterias.
But since the OData model has no relationships it is really hard to do it manually... With a dummy mock.json like in DJ Adams Fiori like SAPUI5 apps it is no problem... But with OData and no things related to each other it is hard... -
Filter Criteria with where condition in graph api query
Hi
Filter criteria in graph api is working fine through this api
https://graph.windows.net/adummydirectory.onmicrosoft.com/users?$filter=displayName eq 'Ashok'&api-version=1.5
Select criteria is also working fine through this api
https://graph.windows.net/ adummydirectory.onmicrosoft.com/users?api-version=1.5&deltaLink=&$select=displayName,accountEnabled
But when I am combining both query that means, I want that select criteria should also apply with filter clause like
https://graph.windows.net/adummydirectory.onmicrosoft.com/users?$filter=displayName
eq 'Ashok'&api-version=1.5&deltaLink=&$select=displayName,accountEnabled
But its generating error
"odata.error": {
"code": "Request_UnsupportedQuery",
"message": {
"lang": "en",
"value": "Unsupported expression node type 'Equal' for Where expression."
So please suggest how we can use select clause with filter criteria. our requirement is that we don’t need all attributes .we want selected attributes for filtered users.Greetings!
The differential query syntax does not allow for a filter other than $filter=isof(<directory entry type>). You are not able to use any other query string for this type of query. Please see the following MSDN link for details:
http://msdn.microsoft.com/en-us/library/azure/jj836245.aspx
I will need to do a bit more research to see if it is possible to request specific attributes for an object query and post back to this thread when I have a response.
Regards,
MaxV ( MSFT ) -
Sum the value of look up table based on two filter criteria
Hello Everyone
I am new to Powerpivot and would appreciate if someone could help me on the following problem.
You can download the example of this excel file form the following DropBox link:
Dropbox Link
The first table is tOrders
Week number
Work center
order number
Production time in minutes
2
a
111
60
2
a
112
70
2
b
113
60
3
b
114
50
3
a
115
40
3
b
116
60
4
a
117
90
4
b
118
40
The second is dLookupList
Week number
Work center
mantenace in minutes per week
Break dows in minutes per week
2
a
10
10
2
b
20
5
3
a
15
12
3
b
30
10
4
a
20
10
4
b
10
10
I’m trying to create Pivot that has filter on Week number to show the number of orders, Sum of Production time in minutes and the total of the values form the lookup table dLookupList that matches the work center and the selected week
numbers. So that I can calculate the total time for each work center. Filter criteria is Week number and Work center.
For example if someone select all weeks numbers the result sould look like this
Week number
(All)
Work center
Count of order number
Sum of Production time in minutes
mantenace in minutes per week
Break dows in minutes per week
Total time
a
4
260
45
32
337
b
4
210
60
25
295
Grand Total
8
470
Result for week 2
Week number
2
Work center
Count of order number
Sum of Production time in minutes
mantenace in minutes per week
Break dows in minutes per week
Total time
a
2
130
10
10
150
b
1
60
20
5
85
Grand Total
3
190
How can I relate these two tables to get the above result?
Any help is highly appreciated.
Regards
PriyanHi Recio
Thank you very much for the swift response. I was able to get it work.
I got two questions:
How do you add a total time column to the pivot table like you did? Because there are no calculated field in power pivot.
I prefer that the filter is based on the Orders table. So that if you select all Week numbers in the filter, that pivot will show result for all orders and relevant sums from the lookup list.
Link download the example file
For example: I add Week number 5 to the work center “a”
Week number
Work center
WNandWC
mantenace in minutes per week
Break dows in minutes per week
2
a
WN2WCa
10
10
2
b
WN2WCb
20
5
3
a
WN3WCa
15
12
3
b
WN3WCb
30
10
4
a
WN4WCa
20
10
4
b
WN4WCb
10
10
5
a
WN5WCa
1
1
In the orders table there are no records for week number 5
Week number
Work center
WNandWC
order number
Production time in minutes
2
a
WN2WCa
111
60
2
a
WN2WCa
112
70
2
b
WN2WCb
113
60
3
b
WN3WCb
114
50
3
a
WN3WCa
115
40
3
b
WN3WCb
116
60
4
a
WN4WCa
117
90
4
b
WN4WCb
118
40
4
a
WN4WCa
119
50
But the pivot sums up the week number 5 also.
Do you have any idea how to solve it?
Thank you very much.
Regards
Priyan -
Combined Query Output as Filter Criteria
Post Author: imzdo1
CA Forum: WebIntelligence Reporting
I have the need to run a combined query to produce a list of document numbers (I have that query working) and then use the output from that query as the filter criteria in an expanded query in the same Universe. The output from the first query is 6500 document numbers so it would be very time consuming to cut and paste these into a filter 15 or 20 at a time and then pasting the result of the 300 queries needed to get one report.
I have both reports built, but can not figure out how to link the first report output to the filtering criteria on the second report. I am using Webi, not full client version.
Is is possible and if so how?Post Author: RobotSlave
CA Forum: WebIntelligence Reporting
Hello imzdo1, what type of datasource? the following applies to SQL:
sounds like you need to create a temporary table in your SQL stored procedure, like so:
CREATE TABLE #TempDocumentNumbers
documentNumber int,
documentName Varchar(20)
or however many columns you need, then insert into the temporary table using your existing query like so:
INSERT INTO #TempDocumentNumbers
SELECT (whatever your select statement is)
just remember that you will need to have coresponding columns in your temporary table for each column your select statement returns, once you have the values stored in your temporary table you can join on it just like you would on any other table in the database,
I like to explicitly drop temp tables at the end of my query like so:
DROP TABLE #TempDocumentNumbers -
Set Filter Criteria Fields for ALV
Hi everyone!
Is there a way in ALV that you can set the filtering criteria fields for your ALV report, but not the field values itself?
To be more clear (I hope), When you run the ALV report, it initially shows you the entire report, but when you click on the FILTER button, there are already pre-selected fields for the filter criteria.
Thanks a lot.. points for any useful answer.Hi,
Yes you can do with Layout button in the application tool bar.
First filter out the columns and save it with name.
Everytime you execute the program,click the layout button and select the layout variant .
regards,
Maha -
Additional filter criteria in F110
Hi All,
I understand that there is an additional filter criteria in transaction F110 but is it only to filter specific criteria?
For example, i want to use the allocation field as a filter criteria. I have many documents which are automatically posted to the system with the same leading characters - i.e ABC123, ABC445, ABC918.
In F110, is there a way to ONLY select items with allocation field starting with ABC?
Any help is much appreciated.
Thank you in advance.Dear,
In selection go to document level fields and select Assignment (ZUONR)
Put ABC* and then try if it works...
Regards,
Chintan Joshi -
Extend filter criterias in: MDS_LOAD_COCKPIT
Hello experts,
I'm using mds_load_cockpit for massdata replication in one-client scenario (SRM@ERP) - replication tests were successful (vendors and materials). Now I'd like to use filter criterias to get the desired vendors and material ranges because I'dont want all vendors or materials to be replicated.
My first step was using the listed filters (listed as "fieldnames") in mds_load_cockpit.
But there are only a few fields available which set the criterias:
-Vendors: Account Group, VendorID, Centr.Del Flag
-Materials: DF at client level, mat.group, mat.ID, mat.type
These don't fit my filter requests...
Is there there any way to extend these criterias?
For example like in transaction R3AC1 (which i cannot use in one-client-scenario) for "r/3 material master".
I'd like to use this for materials--> Table: MARA-MAGRV
For vendors i'd like to make a limitation on purchsing org, but I dont know how to do this.
Any suggestions how to proceed? Maybe there is a table where I can maintain/create new entries for my own crits listed as "Filedname" in mds_load_cockpit for filtering.
Could anyone give me a hint?
BR, Patrickhi
i have a big problem during using mds_load_cockpit
when i click on product category->material group and un select backround proccess and execute the transaction i have terminated in program
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program SAPLMDS_LOAD_BRIDGES
Application Component AP-MD-BF-SYN
Date and Time 10.06.2014 09:39:47
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Long text of error message:
Technical information about the message:
Message class....... "MSI_PRODCAT_CUST"
Number.............. 303
Variable 1.......... 1
Variable 2.......... 432339
Variable 3.......... " "
Variable 4.......... " "
Maybe you are looking for
-
Group Quantity field in ALV GRID
hi all, how to group the Quantity fileds in ALV grid output here fldcat-group = 'X' is not useful. ex : in my for a order qty column values are 10.00,10.00,10.00,10.00 for a given sales order then i have to display only one 10.00 instead of 4 tim
-
Error while displying the data of Write-opt DSO
Hai SAP BI Gurus, I have created Write-opt DSO with settings "Do Not Check Uniqueness of Data" CHECKED and data also loaded. Further If i try to "Display data" giving me the below dump. Short text Field symbol has not yet been assigned. What happ
-
Odd Run As issue with Windows 8.1 - Run As domain administrator not working
I'm having an odd issue on a Windows 8.1 laptop. I log in with my standard account, but want to open things like group policy management with my special separate domain admin account. so I press shift, right click, run as a different user - fill in m
-
I've uploaded 4 pdf documents. Now how do I convert them to Excel format?
I've uploaded 4 pdf docs. Now how do I convert them to Excel format so I can manipulate the data? linda93790
-
Recovery of lost file is it possible
I like to recover chat messages from Nov 6, 2012 to Decemeber 2012, can some help please