Upload functin works in Edit mode but not in View mode

I am using the Oracle AS 10g PDK to integrate struts application into Portal. I found the upload function works fine in portlet edit mode, but it doesn't work in view mode (Go to the "The page cannot be found" and URL is "http://servername/portal/page"). Does anybody know the reason.

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Similar Messages

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

BDC works in A-mode but not in N-mode. Why?

We recently upgraded from 4.6b to ERP6. I have a BDC that fails in ERP6 so I am trying to rework it. Something odd is happening. I find that some BDCs run through find in A-mode while you're stepping through them but not in N-mode when it's hands-off.
Here's the really odd thing. I have re-recorded a BDC against tran CO01 that creates a PP work order. I take the recording and product a function. I test the function with all of the default values intact accept for the new work order# and the function runs in A-mode. It FAILs in N-mode. It appears that ERP6 cannot run it's own BDC recordings.
I notice in A-mode that there are sometimes green info messages on the status line. What I'm wondering is if these are ok in A-mode because I can hit enter and move on vs. N-mode that perhaps gets stuck on them. I say that because I have seen BDCs fail and report in the MSGTAB information messages as though this is what caused the transaction to fail.
Is there some config setting in ERP6 that tells BDCs globally not to fail because of informational status messages?
Thank you.
Crew

Hi,
this may be an issue if you or the transaction is doing any updates on screens which may fail as call transaction by default updates in the asynchronous mode...
so try executing the call transaction in synchronous mode and then check if its giving you the same error message.
use
call transaction 'TCODE' using bdcdata mode 'N' update 'S'.
Regards,
Siddarth

OSX Mountain Lion 10.8.4: imessage works fine in safe mode, but not in "normal" mode. Any hints?

My iMessages does not work in "normal" startup, but it works perfectly in safe mode.
Any hints?
I have the same problem on a MacBook Pro 17" and on a MacAir 13" mid 2011.
On my MacMini, iMessage work's fine.
I'm using same apple ID on all 3 devices.
Before update to 10.8.4, i had no problems.
FaceTime also stopped working after update to 10.8.4.
Thanks in Advance,
Lars O.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

BDC with call transaction VD02 works fin in A mode but not in N mode

Hi All,
I have BDC program developed in 4.6c using call transaction VD02 works fine with mode A but not with mode N.
Now we upgraded to ECC 6.0.Do I need to change anything?

No, you don't have to change anything for ECC. BTW, I wonder why VD02 is not working in the background for you?

Dll issue, works in release.exe but not in debug mode.

I have an issue with a dll that was previously working in both released and in debug mode. Now if I create a released .exe it functions. If I run it in debug mode the call to the dll function never returns. eventually whatever is occurring behind the scense prevents the released.exe from working also. I do not know if I accidenatally changed a setting in the cvi compiler that broke the code. Is there a way to default cvi2010 settings?

You can go back to the default ADE settings by renaming the following registry key to something else (anything other than "10.0", it doesn't matter what):
[HKEY_CURRENT_USER]\Software\National Instruments\CVI\10.0.
I think it's best to rename it, rather than delete it, so that you can go back to your current settings any time you choose to. Make sure CVI is not running when you rename the key.
After the rename, the first time you run CVI, it will prompt you if you want to copy the settings. Say no to that. At that point, CVI will create a new "10.0" key with the default settings in place.
Once you're done with your investigation, if you prefer to go back to the settings you had, you can delete the new 10.0 and rename the previous key back to "10.0".

Project runs Ok in debug mode but not in release mode

I have an application developed with VC++ 6.0 and measurement studio. The application controls SCXI-1161/1166 relay boards to connect the UUT. The application runs ok in debug mode, but in release mode the application can't drive the relay boards. I have tried to change optimizations mode, it didn't work. Who can tell me how to solve the problem? Thanks!

It sounds like you have an older version of our SWITCH driver which relies on our DAQ driver. I would recommend uninstalling the Traditional DAQ, DAQmx, and SWITCH drivers and then installing the newest version. At this point you have 2 options:
1) You can download Traditional DAQ 7.4, DAQmx 7.4, and NI-SWITCH 2.4 drivers bundled together here: ftp://ftp.ni.com/support/daq/pc/ni-daq/7.4/
2) You can install the latest version: NI-DAQmx 7.5 here: http://digital.ni.com/softlib.nsf/websearch/CF7ECCEA4C4CC7DE86257038004D88AE?opendocument&node=13206... This has support for all of our USB DAQ devices (if you're not using them then you may not want to worry about installing this now) and then install Traditional DAQ 7.4 here: http://digital.ni.com/softlib.nsf/websearch/C36A54ADDA3DC33D86257038004E55E6?opendocument&node=13206... and NI-SWITCH 2.4 here: http://digital.ni.com/softlib.nsf/websearch/9D6B8C7FD41BF3D08625702E0072E294?opendocument&node=13206...
This should solve your problem.

Drag and drop photo files into photo lab website for uploading photos, worked in old version but not in new version.

drag and drop ability not available in new version. I am trying to upload a large number of photo file to an online photo site for processing and the drag and drop does not work it did on the old version.

Nothing to be fixed. Just a little learning for you.
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

I have a VI with menu barattached i want to remove the menu bar.I am able to remove the menu bar in run continuously mode.but not in normal mode how do i do it in normal mode

I have a VI with menu bar.I am able to remove menu bar in continuous mode by setting window appearence.But i want the menu bar to be removed at normal mode also.How do i do it

You can trun off the menu while the VI is running by going into the VI properties (right click on the VI icon and select 'Properties). Then from the Catagory selestion box, select Window Appearance, click the Customize button, then uncheck the Show Menu Bar check box and hit OK twice. That shold do it.
Note that this will only turn off the menu while the VI is running. The standard menu will always be showing when the VI is not running.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

IP: input-ready query shows data in Load mode but not in Plan mode

Hello experts,
we're currently experiencing a very strange issue regarding an input-ready query which consists of a single lead column (read from the cube) and an input-ready plan column. The issue is as follows:
When the cube is in Load mode the lead column shows its data perfectly. However, when switching to Plan mode the data is not shown.
The cube is indexed by a BIA which may be part of the problem.
We're on BW 7.00 SP 21. I've read that this may be related to the OLAP cache, but haven't been able to find any notes relevant for 7.00 SP 21.
Thanks in advance for any suggestions.
Regards, Dirk

Hi Dirk,
I think that the problem comes from the cache used in the plan buffer query. Delete the cache via RSRCACHE. The query name is
IC/!!1IC if you have a query on an aggregation level on an InfoCube IC
MPRO/!!1MPRO if you have a query on an aggregation level on a multiprovider MPRO or directly on the multiprovider MPRO
You might search for note using 'cache' and component pattern BW-BEX-OT*, e.g. 1408959, 1528191, 1560036.
Regards,
Gregor

JApplet run in Debug mode but not in Run Mode in JDev3.1

Hi All
I am having a problem in running a JSP file which contain an JApplet. When I choose Run from the jDev, the applet seems to take a really long time to load and finally failed to load itself.
However when i choose run from debug mode, the jsp run perfectly by displaying the applet.
Any idea why?
thanks for any help
ka

Hi All
I am having a problem in running a JSP file which contain an JApplet. When I choose Run from the jDev, the applet seems to take a really long time to load and finally failed to load itself.
However when i choose run from debug mode, the jsp run perfectly by displaying the applet.
Any idea why?
thanks for any help
ka

CSS rules show up in design mode, but not in live or in browser.

So some rules work in the browser some appear when in design mode, but not in live mode or in the browser.
In one case there is no competing rules I applied background color and border color to a dynamic table and I see the colors in design view. In another there is a competing rule, but the one that wins is #content, when the rule I want #content #footer p is (obviously) a compound and at the bottom of the rules.
Any thoughts?
Thanks
Gregg

AH In preparing my stylesheet to show you, I noticed the rule above those two was missing it's ending curly brace. Problem solved! That's what I get for checking code when I am sleepy!
Thank you SnakeEyez02
Gregg

PSE 10 will print from the organizer and in sharing mode, but not from full edit

I'm using pse10 on a computer with an i7 processor with 12GB of ram and windows 7 with a color laser printer. The print function works fine while in organizer and sharing mode, but not from full edit. When I try to print from full edit, I get an error message with a red "X" on it that says: "Before you can perform printer related tasks such as page setup or printing a document, you need to install a printer." I can't figure it out. The printer is in "ready" state, and works fine in the organizer mode, and in share. Any thoughts on what I'm missing? Thanks for any help in advance.

This occurs frequently with HP printers, though others are implicted as well from time to time
In Control panel>Devices and printers, right click your active printer, go to Printer Properties, and rename the printer to something short, e.g. my printer
http://kb2.adobe.com/cps/865/cpsid_86566.html

HT1349 My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Works in Main Application mode but not the orange NXT mode for some NXT's

A simple Labview program designed using only NXT VI's worked in the Main Application but not in NXT mode. For some NXT's it worked in both modes but for others, just in Main Application mode. I've tried updating the firmware and plugging and unplugging the USB. Any thoughts?

I see. The problem is probably that when you are switching to the NXT Target mode, it is expecting to target the other brick to which you already deployed. If you right-click on the orange banner menu in the lower left corner, you should be able to select the other NXT, or use "Find NXT..." to scan/search for bricks.
Also, I reccommend giving all your NXTs unique names so this is more obvious. (you can use the NXT Terminal tool to do that).
If you still can't get the VI to run in target mode, restart labview.

Upload functin works in Edit mode but not in View mode

Similar Messages

Maybe you are looking for