Upload images to eBay

I wonder if anybody is able to upload images to eBay, when selling an item.
If I select an image and then click on the upload button nothing happens. The images are jpg-files with the recommended resolution. I am using the latest version of safari on Mac OS X 10.4.10. Any idea? Are there any special options in safari that have to be checked?

Hello SaTh,
Welcome to Apple Discussions.
Have you previously been able to upload the pictures and this has just started to happen or is it your first attempt to load pictures on ebay.
This is what I do and have not had any problems with my pictures uploading.
Click add picture then choose file
After you select your picture you must click choose in the bottom right hand corner then that pop up disappears and that picture name appears as No. 1. If you need to get another picture click choose file again and do the same as above. When all your picture names are in the list then click upload.
This works for me with Safari. I use Firefox as well with another ID and the procedure is the same except choose file says Browse and choose says open
The only difference I can see between the 2 browsers with ebay is that Firefox seems to do everything a little quicker.
Hope this helps.
Regards,
Alan

Similar Messages

Unable to upload images

As of a few days ago I am unable to upload images online. First I noticed it with a Mixbooks and then with Ebay. In some cases it starts to load it and then starts over and over without any success. On Ebay it just sits there preparing to upload. I tried uploading it from iPhoto and then from my desktop with the same results. The internet connection is good and firewall isn't an issue. I'm running the latest Snow Leopard version on a 6 month old 27" iMac. Any suggestions?
Thanks

Hi
On the WIKI there is a place to report performance issues:
https://lab.msdn.microsoft.com/mailform/contactus.aspx?refurl=http://technet.microsoft.com/wiki
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Since I have installed OS X Mavericks, my Macbook pro (Mid 2010) shut down unexpectly everytime when I uploading image.

Since I have installed OS X Mavericks, my Macbook pro (Mid 2010) shut down unexpectly everytime when I uploading image to Facebook or Ebay. What can I do?

A number of folks have posted similar crashing-related reports with that same system.
http://www.macworld.com/article/2062783/cures-for-a-panicking-mid-2010-macbook-p ro.html
You may wish to contact Apple support.

Safari not uploading images

I am trying to help a friend who is unable to upload .jpg files to Ebay using Safari. She is also unable to send email with .jpg attachments via her AOL online account. Both just keep trying to upload the image and finally give up saying the process timed out. These image file sizes are much less that 1 mb so I don't think it's a file size issue. She is using Safari 5.1.5 and OS X 10.7.3.
I joined her wireless network with my MacBook Pro, Safari 5.1.5, and OS X 10.7.3, and tried uploading the same image to Ebay and had no problem.
The only thing I could think of trying was emptying Safari's cache, but that didn't help.
Can someone please give me some other ideas to try? I would appreciate it.

We're having this problem here at work too. We upload tons of images to a password protected website. Our designers who are still on 10.3.9 have zero problems with Safari. Anyone on 10.4 (they're at 10.4.5 or .6) all have problems with Safari. The first upload usually works, but after that your success rate drops quickly. I have tried clearing caches, adjusting sysctl settings, etc., but nothing helps much, if at all. Restarting Safari or logging out of the site sometimes gets you another good upload or two, but then it doesn't work.
There are three things that have worked for us:
- Submitting again. If we just click our submit button once more, it works 100% of the time.
- Running Firefox. It works every time. It seems a little slower and has 10-20% more packets on a 9MB file than Safari, according to tcpdump.
- Running tcpdump. This is a Unix command, and must be run as root. This looks at packets being sent and received and can filter to just look at certain destinations. I was using this to see why Safari was failing, but it won't when you run this. I don't recommend this, since I don't know what else will break if I leave it on.
By the way, I found that by running Activity Monitor and viewing the network usage in the dock icon will quickly tell you if your upload is working. On a 9MB upload that takes 60-75 seconds, you can tell within the first 5-10 seconds if it is working since you see outbound traffic. If it isn't working, you will only see very small amounts of outbound traffic.

Can not upload image of larger size in jsf

i had some issues in file uploading. File uploading is working fine in my local machine and when i am using the www.mywebsite.com:8080/fileUpload.jsf
but i can not upload images by using the following www.mywebsite.com/fileUpload.jsf
Ie: without the port. I am using windows server and tomcat 5.5.27
When i am trying to upload a bigger size image i am getting the following error
I am using jsf(tomahawk)
09:10:47,315 ERROR MultipartRequestWrapper:? - Exception while uploading file.
org.apache.commons.fileupload.FileUploadException: Processing of multipart/form-data request failed. Socket read failed
at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:384)
at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:268)
at org.apache.myfaces.webapp.filter.MultipartRequestWrapper.parseRequest(MultipartRequestWrapper.java:85)
at org.apache.myfaces.webapp.filter.MultipartRequestWrapper.getParameter(MultipartRequestWrapper.java:181)
at org.apache.myfaces.context.servlet.RequestParameterMap.getAttribute(RequestParameterMap.java:42)
at org.apache.myfaces.context.servlet.AbstractAttributeMap.get(AbstractAttributeMap.java:91)
at org.apache.myfaces.renderkit.html.HtmlResponseStateManager.getTreeStructureToRestore(HtmlResponseStateManager.java:159)
at org.apache.myfaces.application.jsp.JspStateManagerImpl.getSequenceString(JspStateManagerImpl.java:260)
at org.apache.myfaces.application.jsp.JspStateManagerImpl.restoreTreeStructure(JspStateManagerImpl.java:230)
at org.apache.myfaces.application.jsp.JspStateManagerImpl.restoreView(JspStateManagerImpl.java:267)
at org.apache.myfaces.application.jsp.JspViewHandlerImpl.restoreView(JspViewHandlerImpl.java:231)
at org.apache.myfaces.lifecycle.RestoreViewExecutor.execute(RestoreViewExecutor.java:81)
at org.apache.myfaces.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:95)
at org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:70)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:139)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:100)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:147)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at com.zerone.rrs.authentication.AuthenticationFilter.doFilter(AuthenticationFilter.java:100)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
at org.apache.coyote.ajp.AjpAprProcessor.process(AjpAprProcessor.java:444)
at org.apache.coyote.ajp.AjpAprProtocol$AjpConnectionHandler.process(AjpAprProtocol.java:472)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1286)
at java.lang.Thread.run(Unknown Source)

Never mind . problem solved after i restarted

Error message "This program cannot display the webpage when uploading images to Cafe Press

I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
Most likely causes:
• You are not connected to the Internet.
• The website is encountering problems.
• There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address."
I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
Server not found
Firefox can't find the server at members.cafepress.com.
* Check the address for typing errors such as
ww.example.com instead of
[url=http://www.example.com]www.example.com[/url]
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
Nancy
http://www.cafepress.com/calendarflr

Sounds like your desktop application is in fact running from
a server. CHMs were identified as a security risk by Microsoft and
are best suited to the user's PC.
Click
here for more information.

Simple upload image to amazon S3 winjs for windows phone 8.1?

Hi
Can behind simple upload image to amazon S3 winjs for windows phone 8.1?Thank

Yes.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Problem when trying to rename uploaded images using session value

Hi,
I have a form where 9 images are uploaded made into thumb nail size and then stored in a file. What I´m trying to do is rename those thumbnails from their original name to username_0, username_1, username_2 etc for each of the 9 thumbs. The username comes from the registration form on the same page. I have created a session variable for the username and am trying to use that to change to name of the image name, whilst my images are uploading and resizing the name stays as the original and not as the new username_$number. I have pasted relevant code below and would very much appreciate any help with this:
<?php session_start();
// check that form has been submitted and that name is not empty and has no errors
if ($_POST && !empty($_POST['directusername'])) {
// set session variable
$_SESSION['directusername'] = $_POST['directusername'];
// define a constant for the maximum upload size
define ('MAX_FILE_SIZE', 5120000);
if (array_key_exists('upload', $_POST)) {
// define constant for upload folder
define('UPLOAD_DIR', 'J:/xampp/htdocs/propertypages/uploads/');
// convert the maximum size to KB
$max = number_format(MAX_FILE_SIZE/1024, 1).'KB';
// create an array of permitted MIME types
$permitted = array('image/gif','image/jpeg','image/pjpeg','image/png');
foreach ($_FILES['photo']['name'] as $number => $file) {
// replace any spaces in the filename with underscores
$file = str_replace(' ', '_', $file);
// begin by assuming the file is unacceptable
$sizeOK = false;
$typeOK = false;
// check that file is within the permitted size
if ($_FILES['photo']['size'] [$number] > 0 && $_FILES['photo']['size'] [$number] <= MAX_FILE_SIZE) {
$sizeOK = true;
// check that file is of a permitted MIME type
foreach ($permitted as $type) {
if ($type == $_FILES['photo']['type'] [$number]) {
$typeOK = true;
break;
if ($sizeOK && $typeOK) {
switch($_FILES['photo']['error'] [$number]) {
case 0:
include('Includes/create_thumbs.inc.php');
break;
case 3:
$result[] = "Error uploading $file. Please try again.";
default:
$result[] = "System error uploading $file. Please contact us for further assistance.";
elseif ($_FILES['photo']['error'] [$number] == 4) {
$result[] = 'No file selected';
else {
$result[] = "$file cannot be uploaded. Maximum size: $max. Acceptable file types: gif, jpg, png.";
................CODE BELOW IS THE INCLUDES FILE THAT MAKES AND TRIES TO RENAME THE THUMBS................................................
<?php
// define constants
define('THUMBS_DIR', 'J:/xampp/htdocs/propertypages/uploads/thumbs/');
define('MAX_WIDTH_THB', 75);
define('MAX_HEIGHT_THB', 75);
set_time_limit(600);
// process the uploaded image
if (is_uploaded_file($_FILES['photo']['tmp_name'][$number] )) {
$original = $_FILES['photo']['tmp_name'][$number] ;
// begin by getting the details of the original
list($width, $height, $type) = getimagesize($original);
// check that original image is big enough
if ($width < 270 || $height < 270) {
$result[] = 'Image dimensions are too small, a minimum image of 270 by 270 is required';
else { // crop image to a square before resizing to thumb
if ($width > $height) {
$x = ceil(($width - $height) / 2);
$width = $height;
$y = 0;
else if($height > $width) {
$y = ceil(($height - $width) / 2);
$height = $width;
$x = 0;
// calculate the scaling ratio
if ($width <= MAX_WIDTH_THB && $height <= MAX_HEIGHT_THB) {
$ratio = 1;
elseif ($width > $height) {
$ratio = MAX_WIDTH_THB/$width;
else {
$ratio = MAX_HEIGHT_THB/$height;
if (isset($_SESSION['directusername'])) {
$username = $_SESSION['directusername'];
// strip the extension off the image filename
$imagetypes = array('/\.gif$/', '/\.jpg$/', '/\.jpeg$/', '/\.png$/');
$name = preg_replace($imagetypes, '', basename($_FILES['photo']['name'][$number]));
// change the images names to the user name _ the photo number
$newname = str_replace ('name', '$username_$number', $name);
// create an image resource for the original
switch($type) {
case 1:
$source = @ imagecreatefromgif($original);
if (!$source) {
$result = 'Cannot process GIF files. Please use JPEG or PNG.';
break;
case 2:
$source = imagecreatefromjpeg($original);
break;
case 3:
$source = imagecreatefrompng($original);
break;
default:
$source = NULL;
$result = 'Cannot identify file type.';
// make sure the image resource is OK
if (!$source) {
$result = 'Problem uploading image, please try again or contact us for further assistance';
else {
// calculate the dimensions of the thumbnail
$thumb_width = round($width * $ratio);
$thumb_height = round($height * $ratio);
// create an image resource for the thumbnail
$thumb = imagecreatetruecolor($thumb_width, $thumb_height);
// create the resized copy
imagecopyresampled($thumb, $source, 0, 0, $x, $y, $thumb_width, $thumb_height, $width, $height);
// save the resized copy
switch($type) {
case 1:
if (function_exists('imagegif')) {
$success[] = imagegif($thumb, THUMBS_DIR.$newname.'.gif');
$photoname = $newname.'.gif';
else {
$success[] = imagejpeg($thumb, THUMBS_DIR.$newname.'.jpg',50);
$photoname = $newname.'.jpg';
break;
case 2:
$success[] = imagejpeg($thumb, THUMBS_DIR.$newname.'.jpg', 100);
$photoname = $newname.'.jpg';
break;
case 3:
$success[] = imagepng($thumb, THUMBS_DIR.$newname.'.png');
$photoname = $newname.'.png';
if ($success) {
$result[] = "Upload sucessful";
else {
$result[] = 'Problem uploading image, please try again or contact us for further assistance';
// remove the image resources from memory
imagedestroy($source);
imagedestroy($thumb);
?>
I hope i´ve supplied enough information and look forward to receiving any help or advise in this matter.

Use double quotes here:
$newname = str_replace ('name', '$username_$number', $name);
Change it to this:
$newname = str_replace ('name', "$username_$number", $name);

"file does not exist on remote server" when uploading image

As the title says, when uploading an image im getting the
message "file does not exist on remote server"......yet dreamwever
has uploaded the file, its there. All other pages on my website
work fine when uploading images. Any ideas?

What image type is it? Is it in an images folder or the root
directory? It would be helpful to post a link.

How to display uploaded image in jsp page.

Hello,
I am using struts 1.2.9 and and have uploaded image on the server. Now what I want to do display the image in jsp page after clicking on one link in jsp. I have tried many thing to display image in jsp page. But I am getting an error during displaying image in jsp. I have displayed absolute path in servlet. and used InputStream and outputstream to display image in jsp page.
Can any one help.
Thanks in advance
Manveer Singh

Follow this. This topic is very popular recently on the forum.

How to insert or upload image in RichTextEditor ?

Hello everyone,
I am new to flex and trying to design a full-fledged RichTextEditor in flex builder,Can anyone tell me how to add or upload image
in RichTextEditor at users cursor location ?
also user should be able to resize and move the image around the text editor.

It can be done in either. There are 3 steps.
Learn about greenscreen (keying) including lighting, filming, best formats for video (the way they do it in the weather segment) or masking and roto.
learn about image editing including sizing images, color correcting, applying effects
learn about controlling motion and editing duration of stills in a NLE or After Effects
When you have a few of these basics down and have designed your production you then load up the video and the stills, key out the background or mask around your talent to separate the talent from the background, add your photos to the time line and animate their duration and position.
This is extremely basic stuff that can be accomplished in a NLE or in AE. You can basically reproduce just about any effect you've ever seen in a movie in AE with the right planning and plug-ins. You can do just about anything you've ever seen in a news broadcast in any modern NLE.

How do i create a website that allows customer to upload images and text?

I need some help i have a friend who has asked me if i can create a website that allows them to upload their own images and text at their leisure.
His company is in the car sales trade so they need to regularly be updating their stock, and this needs to be done by somebody with limited computer knowledge so ease of use is fairly important.
I am using dreamweaver cs4 on a G5 Imac running Snow leopard 10.6.8, my skills are limited to creating uncomplicated websites but i am very keen to learn, i am aware of content management systems such as Druplal but have zero knowledge on how to use these.
Any assistance would be greatly appreciated
Andy Barrington
www.andybarrington.com

You can take a read here
http://www.hotscripts.com/category/php/scripts-programs/classified-ads/autos/
http://icloudcenter.com/auto-dealer-car-sales-script.htm
Although putting together a form that would upload images and all the descriptions required seems like a fairly straghtforward project, depending on your current skill set.
Gary

Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.

Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
    NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
    NSMutableDictionary *properties = [NSMutableDictionary dictionary];
    [properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
    [properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
    [self.session createDocumentFromInputStream:inputStream
                                       mimeType:@"image/png"
                                     properties:properties
                                       inFolder:salesOrderRouteMapFolderId
                                  bytesExpected:[imageData length]
                                completionBlock:^(NSString *objectId, NSError *error) {
                                    NSLog(@"Object id is %@",objectId);
                                    if(error == nil) {
                                        [inputStream close];
                                        NSLog(@"Uploading Sales order route map successfully.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
                                    } else {
                                        [inputStream close];
                                        NSLog(@"Uploading sales order route map failed.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
                                } progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
                                    NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
             httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
                    properties:(CMISProperties *)properties
            contentInputStream:(NSInputStream *)contentInputStream
               contentMimeType:(NSString *)contentMimeType
                 bytesExpected:(unsigned long long)bytesExpected
                   cmisRequest:(CMISRequest*)request
               completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
                 progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
    // Validate param
    if (link == nil) {
        CMISLogError(@"Must provide link to send atom entry");
        if (completionBlock) {
            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
        return;
    // generate start and end XML
    CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
    writer.cmisProperties = properties;
    writer.mimeType = contentMimeType;
    NSString *xmlStart = [writer xmlStartElement];
    NSString *xmlContentStart = [writer xmlContentStartElement];
    NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
    NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
    NSString *xmlContentEnd = [writer xmlContentEndElement];
    NSString *xmlProperties = [writer xmlPropertiesElements];
    NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
    NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
    // The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
    // the fly to support very large files.
    [self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
                                     httpMethod:httpRequestMethod
                                        session:self.bindingSession
                                    inputStream:contentInputStream
                                        headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
                                  bytesExpected:bytesExpected
                                    cmisRequest:request
                                      startData:startData
                                        endData:endData
                              useBase64Encoding:YES
                                completionBlock:^(CMISHttpResponse *response, NSError *error) {
                                    if (error) {
                                        CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
                                        if (completionBlock) {
                                            completionBlock(nil, error);
                                    } else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
                                        if (completionBlock) {
                                            NSError *parseError = nil;
                                            CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
                                            [atomEntryParser parseAndReturnError:&parseError];
                                            if (parseError == nil) {
                                                completionBlock(atomEntryParser.objectData, nil);
                                            } else {
                                                CMISLogError(@"Error while parsing response: %@", [parseError description]);
                                                completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
                                    } else {
                                        CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
                                        CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
                                        if (completionBlock) {
                                            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
                                                                                 detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
                                  progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.

Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip

Storing Uploaded Image Path into Mysql

Hi I am developing a cms and am using the code David gives in his book PHP Solutions, everything works fine but I can't work out how to extract the uploaded path so that it is stored in my table.
Help would be really appreciated, I am making good progress in learning the php especially with David's books but am still struggling when it comes to having to customized the code.
The code for the upload.php is as follows,
<?php
class Gp1_Upload{
protected $_uploaded = array();
protected $_destination;
protected $_max = 51200;
protected $_messages = array();
protected $_permitted = array('image/gif',
                                'image/jpeg',
                                'image/pjpeg',
                                'image/png');
protected $_renamed = false;
public function __construct($path) {
    if (!is_dir($path) || !is_writable($path)) {
      throw new Exception("$path must be a valid, writable directory.");
    $this->_destination = $path;
    $this->_uploaded = $_FILES;
public function getuploadpath (){
public function getMaxSize() {
    return number_format($this->_max/1024, 1) . 'kB';
public function setMaxSize($num) {
    if (!is_numeric($num)) {
      throw new Exception("Maximum size must be a number.");
    $this->_max = (int) $num;
public function move($overwrite = false) {
    $field = current($this->_uploaded);
    if (is_array($field['name'])) {
      foreach ($field['name'] as $number => $filename) {
        // process multiple upload
        $this->_renamed = false;
        $this->processFile($filename, $field['error'][$number], $field['size'][$number], $field['type'][$number], $field['tmp_name'][$number], $overwrite);
    } else {
      $this->processFile($field['name'], $field['error'], $field['size'], $field['type'], $field['tmp_name'], $overwrite);
public function getMessages() {
    return $this->_messages;
protected function checkError($filename, $error) {
    switch ($error) {
      case 0:
        return true;
      case 1:
      case 2:
        $this->_messages[] = "$filename exceeds maximum size: " . $this->getMaxSize();
        return true;
      case 3:
        $this->_messages[] = "Error uploading $filename. Please try again.";
        return false;
      case 4:
        $this->_messages[] = 'No file selected.';
        return false;
      default:
        $this->_messages[] = "System error uploading $filename. Contact webmaster.";
        return false;
protected function checkSize($filename, $size) {
    if ($size == 0) {
      return false;
    } elseif ($size > $this->_max) {
      $this->_messages[] = "$filename exceeds maximum size: " . $this->getMaxSize();
      return false;
    } else {
      return true;
protected function checkType($filename, $type) {
    if (empty($type)) {
      return false;
    } elseif (!in_array($type, $this->_permitted)) {
      $this->_messages[] = "$filename is not a permitted type of file.";
      return false;
    } else {
      return true;
public function addPermittedTypes($types) {
    $types = (array) $types;
    $this->isValidMime($types);
    $this->_permitted = array_merge($this->_permitted, $types);
protected function isValidMime($types) {
    $alsoValid = array('image/tiff',
                       'application/pdf',
                       'text/plain',
                       'text/rtf');
      $valid = array_merge($this->_permitted, $alsoValid);
    foreach ($types as $type) {
      if (!in_array($type, $valid)) {
        throw new Exception("$type is not a permitted MIME type");
protected function checkName($name, $overwrite) {
    $nospaces = str_replace(' ', '_', $name);
    if ($nospaces != $name) {
      $this->_renamed = true;
    if (!$overwrite) {
      $existing = scandir($this->_destination);
      if (in_array($nospaces, $existing)) {
        $dot = strrpos($nospaces, '.');
        if ($dot) {
          $base = substr($nospaces, 0, $dot);
          $extension = substr($nospaces, $dot);
        } else {
          $base = $nospaces;
          $extension = '';
        $i = 1;
        do {
          $nospaces = $base . '_' . $i++ . $extension;
        } while (in_array($nospaces, $existing));
        $this->_renamed = true;
    return $nospaces;
protected function processFile($filename, $error, $size, $type, $tmp_name, $overwrite) {
    $OK = $this->checkError($filename, $error);
    if ($OK) {
      $sizeOK = $this->checkSize($filename, $size);
      $typeOK = $this->checkType($filename, $type);
      if ($sizeOK && $typeOK) {
        $name = $this->checkName($filename, $overwrite);
        $success = move_uploaded_file($tmp_name, $this->_destination . $name);
        if ($success) {
            $message = "$filename uploaded successfully";
            if ($this->_renamed) {
              $message .= " and renamed $name";
            $this->_messages[] = $message;
        } else {
          $this->_messages[] = "Could not upload $filename";
?>
The code for my form page is this
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<?php
//THE FOLLOWING CODE IS FOR THE UPLOADING OF IMAGES AND FILES
// set the max upload size in bytes
$max = 51200;
if (isset ($_POST ['submit']))
            //define the path to the upload folder
            $destination = 'uploads/';
            require_once('classes/Upload.php');
            try {
                $upload = new Gp1_Upload($destination);
                $upload->setMaxSize($max);
                $upload->move();
                $result = $upload->getMessages();
            } catch (Exception $e) {
                echo $e->getMessage();
// END OF UPLOADING OF IMAGES AND FILES
?>
<form id="newvenue" action="" method="post" enctype="multipart/form-data" >
      <?php
           // THIS CODE DISPLAYS ERROR MESSAGES FOR THE FILE UPLOADS
          if (isset($result)){
          echo '<ul>';
          foreach ($result as $message){
              echo "<li>$message</li>";
          echo '</ul>';
       ?>
<table id="neweventdisplay" cellpadding="5" border="0">
    <tr>
<td></td>
<td><input type="hidden" name="user_id" value="" /></td>
</tr>
<tr>
<td></td>
    <td>Organisers Name</td>
    <td><input class="input80px" id="org_name" name="org_name" type="text" /> </td>
</tr>
<tr>
<td></td>
<td><label for="image">Upload image:</label></td>
<td><p>
<input type="hidden" name="MAX_FILE_SIZE" value="<?php echo $max; ?>" />
<input type="file" name="image" id="image" />
</p></td>
</tr>
<tr>
<td></td>
<td>Details about your upload</td>
<td><input class="input80px" id="org_uploadcapt" name="org_uploadcapt" type="text" /></td>
</tr>
<tr>
<td></td>
<td><input type="submit" name="submit" id="submit" value="upload"></td>
</tr>
<tr>
<td class="heading"> </td>
<td></td>
</tr>
</table>
</form>
<prep>
<?php
if (isset ($_POST ['submit'])){
    print_r($_FILES);}
    ?>
    </prep>
</body>
</html>

Hi David
Thank you very much for your help. I had continued to work on the code and had worked out how to input the image path into the database but it was using the original filename, so when every it is changed it did not work. The code in my page at that point was the following,
<?php     // 2. NEW USER REGISTRATION<br />
        include_once ("includes/form_functions.inc.php");
        $max = 100000;
        $destination = 'uploads/';
        // START FORM PROCESSING FOR A NEW REGISTRATION
        if (isset($_POST['submit'])) { // Form has been submitted.
        $errors = array();
        // perform validations on the form data
        $required_fields = array('org_name');
        $errors = array_merge($errors, check_required_fields($required_fields, $_POST));
        $required_numberfields = array('user_id');
        $errors = array_merge($errors, check_number_fields($required_numberfields, $_POST));
        $fields_with_lengths = array('org_name' => 36, 'org_website' => 100, 'org_contact' => 40, 'org_conemail' => 80, 'org_contel' => 30);
        $errors = array_merge($errors, check_max_field_lengths($fields_with_lengths, $_POST));
        /*Here I am using trim as well as ucwords, this function converts the first letter of each work into a capital letter, I am using this only on the
        firstname and surname to ensure that the data is how I want it as it is going into the database, The better the data is preformated the better the data
        swill be within the database.*/
        $org_name = trim(strtolower(mysql_prep($_POST['org_name'])));
        $org_website = trim(strtolower(mysql_prep($_POST['org_website'])));
        $org_contact = trim(strtolower (mysql_prep($_POST['org_contact'])));
        $org_conemail = trim(strtolower (mysql_prep($_POST['org_conemail'])));
        $org_contel = strtolower (mysql_prep($_POST['org_contel']));
        $userid = $_POST['user_id'];
        $org_uploadcapt = $_POST['org_uploadcapt'];
        $image = $_FILES['image'];
        /*Here is the code that takes the variable captured from the input form and matches it up with the appropriate field in the database. An important point with insertion is that the variables are in the same order as the mysql field names, there will be an error if the number of variables does not match the number of field names. Note that there is no entry for the user id as this is an auto increment file within mysql and so is not needed to be entered*/
        if ( empty($errors) ) {
            $sql = "INSERT INTO organiser
                      (org_name, org_website, org_contact, org_conemail, org_contel, user_id, org_uploadurl, org_uploadcapt)
                      VALUES
                      ('{$org_name}', '{$org_website}', '{$org_contact}', '{$org_conemail}', '{$org_contel}', '{$userid}', '{$destination}".$image['name']."', '{$org_uploadcapt}' )";
            $result = mysql_query($sql, $connection);
            if ($result) {
                $message = "The organiser was successfully created.<br />";
            } else {
                $message = "I am sorry but the organiser could not be added.";
                $message .= "<br />" . mysql_error();
            } else {
                /* this counts the number of errors and informs the user of how many fields were
                incorrectly entered*/
            if (count($errors) == 1) {
                $message = "There was 1 error in the form.";
            } else {
                $message = "There were " . count($errors) . " errors in the form.";
    } else { // Form has not been submitted.
        $org_name = "";
        $org_website = "";
        $org_contact = "";
        $org_conemail = "";
        $org_contel = "";
        $userid = "";
        $org_uploadcapt = "";
//THE FOLLOWING CODE IS FOR THE UPLOADING OF IMAGES AND FILES
// set the max upload size in bytes
if (isset ($_POST ['submit']))
            //define the path to the upload folder
            // Use This On The Local Hosting Machine
            //$destination = 'C:/upload_test/';
            // Use This On The Live Server
            require_once('classes/Upload.php');
            try {
                $upload = new Gp1_Upload($destination);
                $upload->setMaxSize($max);
                $upload->move();
                $result = $upload->getMessages();
            } catch (Exception $e) {
                echo $e->getMessage();
// END OF UPLOADING OF IMAGES AND FILES
?>
<title>Horse Events</title>
<?php include_once("includes/meta.inc.php");?>
<?php include_once("includes/cssfavgoogle.inc.php");?>
<link href="css/adminpanel.css" rel="stylesheet" type="text/css" />
<style>
input[type="number"] {
    width:40px;
</style>
</head>
<body>
<div id="wrapper">
    <div id="admincontent">
<form id="newvenue" action="neworganiser.php" method="post" enctype="multipart/form-data" >
      <?php if (!empty ($message)) {echo "<p class=\"message\">" . $message . "</p>";} ?>
      <?php if (!empty ($errors)) {display_errors($errors); } ?>
      <?php
          // THIS CODE DISPLAYS ERROR MESSAGES FOR THE FILE UPLOADS
          if (isset($result)){
          echo '<ul>';
          foreach ($result as $message){
              echo "<li>$message</li>";
          echo '</ul>';
       ?>
<br />
      <table id="neweventdisplay" cellpadding="5" border="0">
    <tr>
<td></td>
<td><input type="hidden" name="user_id" value="<?php echo $url_userid ['user_id']; ?>" /></td>
</tr>
<tr>
<td> <span class="compuls">*</span></td>
    <td>Organisers Name</td>
    <td><input class="input80px" id="org_name" name="org_name" type="text" />
     </td>
</tr>
      <tr>
      <td><span class="compuls">*</span></td>
    <td>Their Website</td>
    <td><input class="input80px" id="org_website" name="org_website" type="text" /></td>
</tr>
    <tr>
    <td><span class="compuls">*</span></td>
    <td>Organisers Contact</td>
    <td><input id="org_contact" name="org_contact" type="text" />eg: Mrs Jean Kelly</td>
</tr>
    <tr>
    <td><span class="compuls">*</span></td>
    <td>Contact Email</td>
    <td><input class="input80px" id="org_conemail" name="org_conemail" type="text" />
      </td>
</tr>
    <tr>
    <td><span class="compuls">*</span></td>
<td>Contact Tel No.</td>
<td><input id="org_contel" name="org_contel" type="text" /></td>
</tr>
<tr>
<td></td>
<td><label for="image">Upload image:</label></td>
<td><p>
<input type="hidden" name="MAX_FILE_SIZE" value="<?php echo $max; ?>" />
<input type="file" name="image" id="image" />
</p></td>
</tr>
<tr>
<td></td>
<td>Details about your upload</td>
<td><input class="input80px" id="org_uploadcapt" name="org_uploadcapt" type="text" /></td>
</tr>
<tr>
<td></td>
<td><input type="submit" name="submit" id="submit" value="Add Your Organiser"></td>
</tr>
<tr>
<td class="heading"> </td>
<td></td>
</tr>
</table>
<a class="delete" href="controlpanel.php">Cancel</a>
</form>
    </div>
I have added the code you kindly forwarded but am getting an error, I am still trying to learn the basics of php and am unsure of what to do next, my php Upload.php now looks like
<?php
class Gp1_Upload{
protected $_uploaded = array();
protected $_destination;
protected $_max = 100000;
protected $_messages = array();
protected $_permitted = array('image/gif',
                                'image/jpeg',
                                'image/pjpeg',
                                'image/png');
protected $_renamed = false;
protected $_filenames = array();
public function __construct($path) {
    if (!is_dir($path) || !is_writable($path)) {
      throw new Exception("$path must be a valid, writable directory.");
    $this->_destination = $path;
    $this->_uploaded = $_FILES;
public function getMaxSize() {
    return number_format($this->_max/100000, 1) . 'kB';
public function setMaxSize($num) {
    if (!is_numeric($num)) {
      throw new Exception("Maximum size must be a number.");
    $this->_max = (int) $num;
public function move($overwrite = false) {
    $field = current($this->_uploaded);
    if (is_array($field['name'])) {
      foreach ($field['name'] as $number => $filename) {
        // process multiple upload
        $this->_renamed = false;
        $this->processFile($filename, $field['error'][$number], $field['size'][$number], $field['type'][$number], $field['tmp_name'][$number], $overwrite);
    } else {
      $this->processFile($field['name'], $field['error'], $field['size'], $field['type'], $field['tmp_name'], $overwrite);
public function getMessages() {
    return $this->_messages;
protected function checkError($filename, $error) {
    switch ($error) {
      case 0:
        return true;
      case 1:
      case 2:
        $this->_messages[] = "$filename exceeds maximum size: " . $this->getMaxSize();
        return true;
      case 3:
        $this->_messages[] = "Error uploading $filename. Please try again.";
        return false;
      case 4:
        $this->_messages[] = 'No file selected.';
        return false;
      default:
        $this->_messages[] = "System error uploading $filename. Contact webmaster.";
        return false;
protected function checkSize($filename, $size) {
    if ($size == 0) {
      return false;
    } elseif ($size > $this->_max) {
      $this->_messages[] = "$filename exceeds maximum size: " . $this->getMaxSize();
      return false;
    } else {
      return true;
protected function checkType($filename, $type) {
    if (empty($type)) {
      return false;
    } elseif (!in_array($type, $this->_permitted)) {
      $this->_messages[] = "$filename is not a permitted type of file.";
      return false;
    } else {
      return true;
public function addPermittedTypes($types) {
    $types = (array) $types;
    $this->isValidMime($types);
    $this->_permitted = array_merge($this->_permitted, $types);
protected function isValidMime($types) {
    $alsoValid = array('image/tiff',
                       'application/pdf',
                       'text/plain',
                       'text/rtf');
      $valid = array_merge($this->_permitted, $alsoValid);
    foreach ($types as $type) {
      if (!in_array($type, $valid)) {
        throw new Exception("$type is not a permitted MIME type");
protected function checkName($name, $overwrite) {
    $nospaces = str_replace(' ', '_', $name);
    if ($nospaces != $name) {
      $this->_renamed = true;
    if (!$overwrite) {
      $existing = scandir($this->_destination);
      if (in_array($nospaces, $existing)) {
        $dot = strrpos($nospaces, '.');
        if ($dot) {
          $base = substr($nospaces, 0, $dot);
          $extension = substr($nospaces, $dot);
        } else {
          $base = $nospaces;
          $extension = '';
        $i = 1;
        do {
          $nospaces = $base . '_' . $i++ . $extension;
        } while (in_array($nospaces, $existing));
        $this->_renamed = true;
    return $nospaces;
protected function processFile($filename, $error, $size, $type, $tmp_name, $overwrite) {
    $OK = $this->checkError($filename, $error);
    if ($OK) {
      $sizeOK = $this->checkSize($filename, $size);
      $typeOK = $this->checkType($filename, $type);
      if ($sizeOK && $typeOK) {
        $name = $this->checkName($filename, $overwrite);
        $success = move_uploaded_file($tmp_name, $this->_destination . $name);
        if ($success) {
            $message = "$filename uploaded successfully";
            if ($this->_renamed) {
              $message .= " and renamed $name";
            $this->_messages[] = $message;
        } else {
          $this->_messages[] = "Could not upload $filename";
public getFilenames() {
    return $this->_filenames;
?>
The error is Parse error: syntax error, unexpected T_STRING, expecting T_VARIABLE.
I have not worked with oop before and have only very briefly looked at the principle was on my foundation degree.

Since I upgraded to Yosemite I can no longer upload photos to eBay by selecting "events" all my photos pop up together. Anyone know how to fix this?

I recently updated to Yosemite 10.10.1. Since I updated I can no longer upload photos to eBay, Shutterfly, Craigslist by selecting "events". It is no longer an option.
All my photos come up as one entire library. When I view them in iPhoto they are divided into events, however once I go to upload them the entire library appears without any defining options, such as "events", recent imports, etc. I thought at first this might be an issue with eBay, but realized it wasn't when I tried to list on Craigslist. This is a nuisance and time consuming process. Does anyone know if there is a fix in the future or if I am just missing some quick fix?

I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne

Upload images to eBay

Similar Messages

Maybe you are looking for