Upload in ac03

Hi all,
i need clarification on long text upload for ac02 (display service. in this transaction i had to upload the following fields.
asnum,astyp,bklas,meins,..etc. and also long text field.
i developed seperate program for uploading asnum,astyp,bklas,meins.
and seperate program to upload long text.
i uploaded long text based on asnum.
both the programs are working fine.
when i check in the transaction ac03 for my input data give asnum. i am not able to see the long text field data to that corresponding asnum.
below is the code wat i used to upload long text.
REPORT Z_DISPLAY_SERVICE1.
Internal Table for Upload of Long Texts Data
DATA: BEGIN OF itab OCCURS 0,
asnum like asmd-asnum, " Service No
text LIKE tline-tdline, " Long Text
END OF itab.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
INCLUDE STRUCTURE tline. " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname, " Object Name
dl_lan TYPE thead-tdspras. " Language
Constants
Object ID for Long Text of Service Master
CONSTANTS:c_best TYPE thead-tdid VALUE 'LTXT',
c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
PARAMETERS p_file LIKE rlgrap-filename."input file
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = itab
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
Upload the Texts
SORT itab BY asnum.
LOOP AT itab.
dt_lines-tdformat = 'ST'.
dt_lines-tdline = itab-text.
APPEND dt_lines.
dl_lan = sy-langu.
concatenate '00000000000' itab-asnum into dl_name.
Call the Function Module to Create Text
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
fid = c_best
flanguage = dl_lan
fname = dl_name
fobject = c_material
save_direct = 'X'
fformat = '*'
TABLES
flines = dt_lines
EXCEPTIONS
no_init = 1
no_save = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE:/ 'Long Text Creation failed for Service No'(001),
itab-asnum.
ELSE.
WRITE:/ 'Long Text Created Successfully for Service No'(002),
itab-asnum.
ENDIF.
AT END OF asnum.
REFRESH dt_lines.
ENDAT.
ENDloop.
can any body help me in this regard y its not displaying long text for corresponding asnum. please provide solution for this.
thanks in advance.
siva

hi,
thanks for ur quick response,
in internal table it is getting updated. as i mentioned
i am entering some fields by bdc program,and long text by this program,when i click on the corresponding asnum it is displaying the records which i uploaded for th fields.but it is not displaying long text for corresponding field. can u tell me wat is the procedure for uploading
eigther the bdc program first or this long text program.can u help me in this regard.
thanks in advance
siva

Similar Messages

Upload of Service Masters

Hi,
I am trying to upload service masters using recording transaction. Whenever I give the transaction to record as AC03 (Maintain Service Master), the system shows the service master in display mode. There is no option to create. But when I am executing the transaction on its own (not in the recording mode), then I get the option to create and change. Can anyone help on this.
Thanks
Hari

Dear,
U can upload service master either using LSMW batch input method (t.oceAC02) or BDC Programming with the help of ABAPER
Regards
venu gopal

How to upload long text using BAPI_SERVICE_CREATE

Hi,
I'm uploading service master records (transaction AC03) through my program using function BAPI_SERVICE_CREATE. As per the requirements, for each service number, I've to pass long text also (refer to the last text area on the transaction screen).
In the tables section of the bapi BAPI_SERVICE_CREATE, there is a provision for an internal table on the form SERVICE_LONG_TEXTS. But it is of no use as even if I pass data to it, it is not written to the database.
Can anyone tell me solution for my problem?
Thanks.
Anuj.

Anuj,
Create a new program using the following code and run it using an existing service number to see if the longtext gets updated. I ran it in my system and it is working fine. If it works for you, then you can modify your code accordingly.
report zlongtext.
data: header like thead,
      ilines like tline occurs 0 with header line.
parameters: asnum like asmd-asnum.
start-of-selection.
header-tdobject = 'ASMD'.
header-tdname = asnum.            " Make sure it has leading zeroes.
header-tdid = 'LTXT'.
header-tdspras = sy-langu.
ilines-tdformat = '*'.
ilines-tdline = 'Just a test to see how it works'.
append ilines.
clear ilines.
call function 'SAVE_TEXT'
    exporting
      header                = header
   INSERT                = ' '
      savemode_direct       = 'X'
    tables
      lines                 = ilines
   exceptions
     id                    = 1
     language              = 2
     name                  = 3
     object                = 4
     others                = 5.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    call function 'COMMIT_TEXT'.
    if sy-subrc = 0.
      write: / 'updated successfully'.
    endif.
endif.

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
Siddharth

Hi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth

Upload Error message: HTTPS protocol is not supported

Hi,
   Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
   Log says
Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
     How to resolve this?
Thanks
Sumathi

Hi Sumathi,
As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
Hope it helps
Detlev

Downloads to documents folder fail due to parallel upload

Hi, mobile documents is a great tool that I use to replicate all business relevant documents to mobile clients. However there is one great disadvantage for me. When you download a file that is a bit larger (>1 MB), during the download the client will already start uploading the temporary file. So the download then fails as it cannot convert the temporary file into the final one.
This is something that does not happen for equivalent clients (for example skydrive). Do you think this is something that can be fixed?
thanks,
Heiko

Hi Heiko,
Let me explain again:
You said "uploader locks the file so that it can no longer be changed". For the temporary file it is the downloader which have locked the file. Hence, the impression that file is getting uploaded because it is locked is hence not correct.
The next version might be available in Q1\Q2 2014. We will keep everyone updated via community.
Best Regards,
Ashwani Kr Sharma

How do I use the Web module to upload video to my website?

I'm using the Lightroom HTML gallery to upload my photos, fine and dandy, very happy with it. I also have some videos trimmed in Lightroom that I want incorporated into the gallery. This doesn't seem to be happening, instead I just get thumbnails. What/how do I incorporate my video clips into my web gallery? I moved over from jAlbum so I could have a simple one-tool workflow, so I'm really hoping that this is possible.

You can combine stills and video for output to h.264 (mp4 file) for example to upload to Youtube or Vimeo.
FTP upload will be subject to the limitations of your host. The web module within Lightroom creates all resources to link to the file index.html
The forthcoming LR6 is anticipated to have HTML5 galleries.

CD's not purchased from iTunes but uploaded to iTunes do not show up in the music folder on Apple TV! How can I fix this?

CD's purchased from iTunes but uploaded to iTunes do not show up in the music folder on my Apple TV! How do I fix this?

You would need to make sure you're accessing the Computers icon. If you are under the Music icon, that will be accessing the cloud and only show iTunes purchases (unless you subscribe to iTunes Match)

Issue when uploading Sales data from DSO to Cube.

Dear All,
I have an issue when I am uploading Sales data from DSO to Cube. I am using BI 7.0 and I have uploaded all sales document level data to my DSO. Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube. Cube has customer wise aggregation data.
In DSO I have NetPrice(KF) and Delivered_QTY(KF). I do a simple multiplication routine in the transformation from DSO to Cube.
RESULT = SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
Can someone please help me.
Shanka

Hi,
are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
but first verify if other key figures are also having the same issue.
Thanks
Ajeet

Upload data from Excel to BI

Hi 2 all,
Can anyone please send me the complete steps for uploading of data from excel to BI??
Also tell me that when we use DSO or when we use infocube? and if we design query in query designer then we use info cube fields or DSO fields??
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
there is no separate Tcode for 3.5 environment... but in RSA1 itself they give 3.X functionality also.. So, if you want to follow the 3.5 procedure you can go thru that... in the Infosource tab--> select your info area -->and right clcik it.. ->in that create INFOSOURCE 3.X.. for that just right clcik ur CUBE or DSO and --> Additional functions --> Update Rules.. and like that you can follow the same procedure which you done in 3.5..
and for data loading in BI 7.0 from fla file means
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
1) Create a data source
RSA1->Source Systems->FILE(File)->PC_FILE(Filesourcesystem)->Create Application Component(optional)-Create Data source
2) Create the data provider
3) Create Transformation
Right click on the data provider, choose 'create transformation' and choose your data source (give relevant data source and its type)
Just connect the relavant fields between your data source and data provider.
4) Create DTP
Then Double click on the DTP node created under yous transformations. choose the extraction mode
5) Load the data: there are 2 ways:
you can run the infopackage and DTP separately or create a process chain consisting of these infopackage and DTP and run.
Also check /people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option for hex option
Thanks,
Sankar M

On excel sheet upload read the workbook and populate data to sharepoint list

Requirement in my current project:
In a document library when I upload an excel sheet, a specific workbook has to be read and the contents have to be uploaded to a sharepoint custom list.
The approach followed was create an event receiver and register as a feature. Following is the code for event receiver.
public override void ItemAdded(SPItemEventProperties properties)
            base.ItemAdded(properties);
            var list = getSPList("{150301BF-D0BD-452C-90D7-2D6CD082A247}");
            SPListItem doc = properties.ListItem;
            doc["Msg"] = "items deleted from req list";
            doc.Update();
            string excelname=doc.File.Name;
            System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "calling read excel");
            string filepath = doc.File.Url.ToString();
            doc["Msg"] = "excel name" + excelname + filepath;
            doc.Update();
            readExcel(excelname,filepath);
        private static SPList getSPList(String SPListGuid)
           // SPSite Site = SPContext.Current.Site;
            SPSite Site = new SPSite("http://omistestsrv:32252/sites/OMD");
            SPWeb web = Site.OpenWeb();
            Guid listid = new Guid(SPListGuid);
            web.AllowUnsafeUpdates = true;
            SPList List = web.Lists[listid];
            return List;
        private void readExcel(string excelname,string filepath)
            try
                SPSecurity.RunWithElevatedPrivileges(delegate()
                    using (SPSite Site = new SPSite("http://omistestsrv:32252/sites/OMD"))
                        SPWeb web = Site.OpenWeb();
                        string workbookpath = web.Url + "/" + filepath;
                        web.AllowUnsafeUpdates = true;
                        var _excelApp = new Microsoft.Office.Interop.Excel.Application();
                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "iside read excel");
    //my code breaks or fails when cursor reaches this statement. I am not able to open the excel sheet, there is no    //problem related to the permission. same code snippet works in a console application. but when tried as an
event    //handler in sharepoint it breaks. can anyone help me to resolve the problem
                        workBook = _excelApp.Workbooks.Open(workbookpath, Type.Missing, Type.Missing, Type.Missing, Type.Missing,Type.Missing,
Type.Missing, Type.Missing, Type.Missing,Type.Missing, Type.Missing, Type.Missing, Type.Missing,Type.Missing, Type.Missing);
                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "after excel open");
                            int numSheets = workBook.Sheets.Count;
                            // Iterate through the sheets. They are indexed starting at 1.
                            System.Diagnostics.EventLog.WriteEntry("ExcelUpload", numSheets.ToString());
                            for (int sheetNum = 12; sheetNum < 13; sheetNum++)
                                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "inside first for
loop");
                                Worksheet sheet = (Microsoft.Office.Interop.Excel.Worksheet)workBook.Sheets[sheetNum];
                                Microsoft.Office.Interop.Excel.Range excelRange = sheet.get_Range("A13",
"P89") as Microsoft.Office.Interop.Excel.Range;
                                object[,] valueArray = (object[,])excelRange.get_Value(
                                    Microsoft.Office.Interop.Excel.XlRangeValueDataType.xlRangeValueDefault);
                                var list = getSPList("{150301BF-D0BD-452C-90D7-2D6CD082A247}");
                                for (int L = 1; L <= excelRange.Rows.Count; L++)
                                    string stringVal = valueArray[L, 1] as string;
                                    if ((valueArray[L, 1] != null) && (!string.IsNullOrEmpty(stringVal)))
                                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload",
"inside second for loop");
                                        SPListItemCollection
listItems = list.Items;
                                        SPListItem item = listItems.Add();
                                        item["Product"] = valueArray[L,
1];
                                        item["App"] = valueArray[L,
2];
                                        web.AllowUnsafeUpdates
= true;
                                        item.Update();
                            web.AllowUnsafeUpdates = false;
                            //Or Another Method with valueArray Object like "ProcessObjects(valueArray);"
                            _excelApp.Workbooks.Close();
                //workBook.Close(false, excelname, null);
                //Marshal.ReleaseComObject(workBook);
            catch (Exception e)
                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", e.Message.ToString());
            finally
                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "finally block");
Is this the only approach to meet this requirement or is there any other way to crack it. sharepoint techies please help me.

as you described the scenario of the event that it should happen when user upload excel to a document library. Event Receiver is your best bet. However if you would have a requirement that users can send excel files any time to a network file location and
you want to pick it, read it and create list items etc. You would write a sharepoint timer job that would run every 10 minute to check for file and if available on the network drive, perform the operation etc. so that users who send excel file does not need
to come to the sharepoint etc. You can see that you have Event Receivcer option or Timer job option OR you would write a console application to trigger the code at a scheduled time on sharepoint server etc. so you are using the event receiver in the correct
scenario.
Moonis Tahir MVP, MCPD, MCSD.net, MCTS BizTalk 2006/SQL 2005/SharePoint Server 2007 (Dev & Config)

Previewing an image before uploading it using the FileReference class

Previewing an image before uploading it using the FileReference class in flash player 3 not in SDK4

Previewing an image before uploading it using the FileReference class in flash player 3 not in SDK4

Previewing an image before uploading it using the FileReference class in flex 3

Previewing an image before uploading it using the FileReference class in flex 3 ?

hai,
          when this code is used in my application ,i got the name of image and new frame is added each time .But image is not displayed.....
The code starts like this
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
           xmlns:s="library://ns.adobe.com/flex/spark"
            xmlns:mx="library://ns.adobe.com/flex/mx" initialize="init()"   backgroundColor="white" width="100%" height="100%">
    <fx:Script>
<![CDATA[
                import mx.controls.Alert;
                import mx.messaging.Channel;
                import mx.messaging.ChannelSet;
                import mx.messaging.channels.AMFChannel;
                import mx.rpc.events.ResultEvent;
                import mx.controls.Image;
                import spark.events.IndexChangeEvent;
                import mx.managers.DragManager;
<mx:DataGridColumn headerText="Dimension Value" width="10" dataField="dimensionValue"/>
                                               <mx:DataGridColumn headerText="Unit Nmae" width="10" dataField="dimensionUnitName"/>
                                               </mx:columns>
                                       </mx:DataGrid>
                                       <mx:Spacer width="2%"/>
                                   </mx:HDividedBox>
                                   </mx:VBox>
               <mx:Spacer height="0"/>
            <mx:VBox width="100%">
                <s:HGroup height="90" top="0" left="0" right="0" verticalAlign="justify" gap="10" paddingLeft="5" paddingRight="5" paddingTop="5" paddingBottom="5">
                    <s:Button id="btn_loader" top="5" bottom="24" width="100" label="load" click="loadImages()"/>
                    <s:Group width="100%">
                        <s:Group name="cl" top="0" left="0" bottom="0" width="20" mouseOver="//scroll_on(event)" mouseOut="//scroll_off(event)">
                            <s:BitmapImage source="@Embed('../assets/left.jpg')" top="0" left="0" bottom="0" right="0" fillMode="scale"/>
                        </s:Group>
                        <s:List id="imgList" skinClass="skins.ListSkin" top="-3" left="27" right="28" bottom="10"
                                dataProvider="{ImageCollection}" itemRenderer="Image_Render">
                            <s:layout>
                                <s:HorizontalLayout gap="0"/>
                            </s:layout>
                        </s:List>
                        <s:Group name="cr" top="0" right="0" bottom="0" width="20" mouseOver="//scroll_on(event)" mouseOut="//scroll_off(event)">
                            <s:BitmapImage source="@Embed('../assets/right.jpg')" top="-1" left="0" bottom="0" right="0" fillMode="scale"/>
                        </s:Group>
                    </s:Group>
                </s:HGroup>
                <s:SkinnableContainer id="dropCanvas" top="100" left="5" right="5" bottom="5" backgroundAlpha="1.0" alpha="1.0"
                                      dragEnter="dropCanvas_dragEnterHandler(event)"
                                      dragDrop="dropCanvas_dragDropHandler(event)" contentBackgroundColor="#914E4E" backgroundColor="#F7F7F7">
                </s:SkinnableContainer>
            </mx:VBox>
            <mx:Spacer height="5"/>
                                  </mx:VDividedBox>
    </mx:Panel>
</mx:Canvas>

How to delete file from column after upload with messageFileUpload?

Which is the way to delete a file from column i have uploaded with messageFileUpload. After uploading the system generates a link to download the file. But how i can delete the file?

Thank you! Syncing has always scared me...basically I am just afraid to lose any photos. But it worked. Again thank you

Upload in ac03

Similar Messages

Maybe you are looking for