Upload in the material master

hi all,
in the material master , plant spec view i need to upload the shelf life fields
fields are : min. rem shelf life , tot shelf life , period of sled
how to upload this fields along in the materials mater for the existing materials

1. In the initial screen, select the tables for which you want to populate values.
2. Click on the fields tab, here select only those fields for which you want to input values.
3. Execute
4. You will find input selection screen, where you can enter the material nos. (you can add more selection criteria, by clicking on the fourth icon you find at the bottom)
5. Specify your input values & execute
6. Then you will find the material nos. & the fields selected, here you can populate the values as required & save.
Hope the above helps.
Regards,
Vivek

Similar Messages

  • Upload of purchase order text in the material master

    Now we have information of Purchase order text for all the material.
    Is it possible to upload the Purchase order text using LSMW.
    Some friends were telling that LSMW is not possible for Purchase Order text.
    Can anyone suggest how I can upload this purchase order text for all 1000
    material using LSMW program.
    /if not LSMW is there any other method to upload it
    thanks in advance
    deepak.s.goura

    Dear Deepak,
    there is standard direct upload i believe
    go to lsmw
    Execute 1st option
    then inLSMW:Object Attribute screen
    in standard batch/ direct input
    firsr radio button
    select object 005
    and method 003
    Program name RSTXLITF.
    Then go by normal process i.e source field , field mapping...
    In this way u can also upload Text in the Material master.
    Rewards if helpful
    Regards
    Sanjay L

  • Upload the material master

    Hi all,
             can u pls give the global structure for Upload the material master (All Views Should Be Covered).
    Regards,
    ravi.

    hi,
    Please go to TCODE SHDB.
    Create a new recording with any zname and enter the tcode in the tcode field.
    Now it will record all the screens which you encounter during a record creation.
    Once it is done, it will take you to the recorded data. Save and come back.
    Now select the recording and click on program which creates a program for your recording.
    you have 2 options one for transfering from file and one for transfer from recording.
    if you use the file options then it will create the internal table with the fields .
    incase of tranfer from the recording then it will directly puts the recorded valus which are to be replaced by creating an internal table and replacing the recorded values with the workareas.
    Make necessary changes in the code which was generated automaticallly.
    hope this is clear.
    Thanks and regards.

  • Error in uploading the material master data

    HI friends,
    I have trasferred the material master data through idocs from one server to another server(with in SAP only).
    Outbound side the status of idoc is 3 which is OK.But inbound side ,the status is 51 and the error is 'Function module not allowed  IDOC_INPUT_MATMAS01'.I debugged the function module in which the control records , data records are getting transferred correctly and also the segments data is also fine.But , i am not able to rectify  the error.
    Can anybody give the solut

    Hi mahesh,
    check the proces code may be having the FM module 'IDOC_INPUT_MATMAS01'. change with some other FM for processing the IDOC. you need check with different ways what is the problem. better dont stick on one thought.
    ~linganna

  • Legacy number in the material master

    Dear SAP Guru,
    Good day.
    We are currently in production support today and we want to understand how a legacy number differs from a material number. As we can see in the material master (Classification View) there is an indicated legacy number there with a corresponding value. Could you further elaborate on how and what is the usage of a legacy number?
    Thanks in advance for your help.
    Kind regards,
    JMT

    Jasmin,
    Basically some clients would be interested to track the SAP material number with referance to the Legacy material number, this data would be uploaded during the Cut-over and data conversion to SAP.
    I would suggest you look at the Functional/Tehnical specification document for the conversion program which was used for uploading the material master data into SAP, that would give you the business reason and the field mapping details.
    Regards,
    Prasobh

  • Attaching u0093material photou0094 on the user tab of the material master transacti

    All,
    We are exploring a solution for attaching “material photo” on the user tab of the material master transactions - MM01/MM02/MM03 in ECC6.0.
    Please review the questions outlined below from the client -
    - Is it feasible to attach a “photo” of material to the user TAB of transactions MM01/MM02/MM03.
    - What’s the performance impact on the online transaction?
    - What’s the storage impact of having photo attached to the materials?
    - Where and how is the “gif or jpg” image of the material stored?  As a file on UNIX?
    - Can a small “photo area” be added user tab?
    - Does this require extensive programming or configuration to achieve this?
    - How much of time would something like this require to setup?
    If anyone has worked on similar requirements, request you to respond at the earliest.
    Regards
    Deepthi.

    Hi Deepthi,
    - Is it feasible to attach a “photo” of material to the user TAB of transactions MM01/MM02/MM03.
    Yes its feasible
    - What’s the performance impact on the online transaction?
    There would definitely be impact on performance. The impact would depend on the Size of the Image file to be uploaded. So you need to do a performance analysis for various Size of Image file & select the one which doesn’t have much impact on performance & also has a good quality resolution of image
    - What’s the storage impact of having photo attached to the materials?
    SAP as such wont have any impact except the additional space required to store the images
    - Where and how is the “gif or jpg” image of the material stored?  As a file on UNIX?
    You can store it using transaction SMW0
    - Can a small “photo area” be added user tab?
    Programmatically yes. It would be a custom container in which you would be uploading the photo
    - Does this require extensive programming or configuration to achieve this?
    No idea whether it can be achieved through some config. Settings.
    Programmatically it’s possible. Yes, it requires extensive programming. You need to maintain a table with Material No. & photo name. Accordingly you need to build the logic to upload the image. This works mostly on the Class CL_GUI_PICTURE & its methods.
    Sample programs
    SAP_PICTURE_DEMO
    SAP_PICTURE_DEMO_ICON
    RSDEMO_PICTURE_CONTROL
    - How much of time would something like this require to setup?
    Well if the image size is defined, then it should take max. 15 working days to develop the same
    Best regards,
    Prashant

  • New Text in the Sales Text View in the Material Master

    Hi All,
    I want to create new text ID in the material master sales text tab
    Can you please help me in how to create the new text for material master sales text tab view.
    Regards
    Rajesh

    Well it may not be possible by standard SAP to create in Material.
    AN alternative might be to use a standard text type and then call it in your Text Determination Procedure.
    T-code "SO10" --> Give "Text Name  & Text ID & Language --> Click at "Create" --> On next screen --> Go to (Menu) --> change editor --> Write the text which you want
    Go to VOTXN , and maintain the required confirguation to get this standard Text copied to the material during order processing.
    Regards
    Sai
    Edited by: Sai on Apr 16, 2010 1:39 PM

  • Open field for cost center on the material master

    We have a unique requirement in a facility we intend to implement plant maintenance in to track a cost center to a material by including the cost center on the material master somewhere.  Cost center is not a field on any of the material tabs we use for maintenance materials, but the requirement is just that it is tracked in a field, even if it's just an open field like a "user defined field" or another field not used often.  We realize there are disadvantages such as the field not being checked against active cost centers, but we are looking at options short of adding cost center as a field manually to a tab (which I believe would require ABAP assistance).  I don't think there are any other fields/tabs we are currently not utilizing but I could be wrong... The best option we can think of is adding it in a material characteristic so it shows on the classifications tab, but I thought I would see if anyone has any other ideas.
    Thanks

    Not sure what is the need of cost center on material master when you want to implement Plant maintenance module. Do you have any specific requirement for this?
    Ideally cost center will be derived from either functional location/ equipment (equivalent of material master) on to PM work order or notification.
    Can you elaborate the requirement?
    After all if you wish to go with cost center, then I suggest it should be at plant level as PM requires plant level distribution. You can add up a custom field and give the reference of cost center data element with help of developer.

  • How to maintain the material master data in plant

    Hi all,
    while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

  • Error while creatting the Material Master IDOC in ERP 2005

    Hello All,
    I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
    I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
    The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
    After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
    On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
    Thanks for any kind of input.
    Regards,
    Rahul
    Message was edited by:
            Rahul Gavande

    Dear,
    Check ABAPer for file settings.
    - CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
    - CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
    - CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
    - CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
    - CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
    - CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
    Check Note: 70752.
    Regards,
    Syed Hussain.

  • Automatic creation of  Warehouse No. data in the material master

    Hi all,
    I want the automatic creation of  Warehouse No. data in the material master record at the time of the first goods receipt is allowed.
    Similar to the way where we can do the same for Storage Location by clicking on Create SLoc. automatically in the plant parameters settings.
    can it be done..plz guide.
    Regards,
    Sandeep

    Hi Deepak ,
    Such facility is not available for Warehouse .
    Regards
    Ramesh Ch

  • Plant specific fields in the material master for product move

    Hi, SAP gurus,
    My scenario is we are moving a existing product in US plant to Brazil plant. What are the fields in the material master that are specific to a plant that will change. For ex MRP controller will change from plant to plant. Like that can anybody please provide me a list of fields that i need to be looking at?
    Thank you
    Anusha

    Hi Anusha,
    First of all, list down all your materials those you want to extend to new plant.
    a) Secondly, pay attention to those fields you will find "filled" in those materials at plant level.
    b) MARC comes handy for you to analyse which fields are at plant level.
    Intersection of fields with values between a and b are the ones you need to work out.
    Good luck,
    Regards

  • Authorisation object for "PO text in the material master"

    Hi,
    My requirement is as below:
    "All users can see the Purchase Order Text as usual, but only a few users should be allowed to create / change the PO Long Text.
    For other users, the same should appear in display mode only (both in creation & in change mode, MM01 & MM02)."
    Please let me know, How to map this.
    As per my knowledge thsi is possible only thru authorisation. But I want to know what is the authorisation object for "PO text in the material master" (Pl note that only for PO text in the material master field). we want control on "PO text of material master"
    Regards.
    Chinna

    Hi,
    The authorisation object is "M_MATE_MAT", pl check
    Regards
    Merwyn

  • For a PR, check the material master

    Hi,
    I have a basic question.
    I have a requirement to check the material master to determine the existence of the material master after a PR is created. Can we create a PR without a material.
    What are the methods of creating PR apart from manual creation
    Thanks.

    > Hi,
    >
    > I have a basic question.
    > I have a requirement to check the material master to
    > determine the existence of the material master after
    > a PR is created. Can we create a PR without a
    > material.
    > What are the methods of creating PR apart from manual
    > creation
    >
    > Thanks.
    Hi,
    Here u can Extend the material master after creating PR,and u can create PR with Out Material master,but this is possible only with Consumable materials and services.
    Thanks & Regards
    suresh

  • Help needed in seeing the material master.

    Hi all,
    How can i see the sales area info in a system. i.e. what material is assigned to what sales area, the mapping between the sales org., distr. channel, division and plants? I ask this because when I see some tabs/views in mm03, it asks me the sales area info and I dont know what to give there.. so in effect i get to see only some views in the material master.
    Thanks,
    Charles.

    Hi Charles,
       If you want to know all those materials which have a Sales View, you can go to
    MARA table and search for all those materials that have  a 'V' in MARA-PSTAT field. Later you can use MM03 to see the sales data for that materials.
    Procedure:
    se16 transaction.
    Give V in PSTAT field n selection criteria. and execute.
    Regards,
    Ravi

Maybe you are looking for

  • Thunderbolt port not working as dvi in New iMac, is there any fix for it?. I have a Samsung SyncMaster 2494 SW

    Just bought the new iMac, also bought apple's mini dvi adapter, when connecting to Samsung SyncMaster 2494sw i get a snow kind of pattern and sometimes let me see apple desktop through it, i tried changing resolutions but nothing, is it a software is

  • Connecting ibook to TV

    My daughter just got a 14" iBook for college. It has a 60 GB hard drive, 512MB memory and built in airport. Is there a way to connect the iBook to a television that has component video and s-video connections so that she can watch DVD's on the TV? It

  • Getting Information about In-Time and Out-Time

    Hello Experts, I want to retrieve the In time and Out time of Employees. The data is maintained in Infotype 2002 (Attendences). How would I get the data. Is there any Function Module avaiable for this ? Please help me out.. Regards, Ravi Khattar.

  • Lightroom from a PC to a MAC

    I have both Lightroom and Photoshop on my PC laptop. Well now I am in the market to buy a MAC, but do I have to buy new softwear again or is there any way to instal it on to a MAC?

  • IPod Touch freeze when stopping iTune backing up iPod

    I have experienced this problem a few times. I have 80 freewares installed. It takes almost 2 hours to backup my iPod Touch. My iPod Touch is not responding when I stopped the backup process in the middle. I have to restore to make it work again. Thi