Upload language bundle in p6 sp2?

Hello,
We have EP6 sp2 and we have created a new language bundle to support diffrent names for our meta Data.
I have found a how to guide that explains how to do it but it is version is ep5 sp5 and we have ep6. i have created the jar file but i do not know where to put it in the file system in order to upload it to the km.
Does someone knows how i can do it ?

Hi Asher,
see http://help.sap.com/saphelp_ep60sp2/helpdata/en/e7/cb7339fb23644fa9e406c6bc431c9b/frameset.htm and / or http://help.sap.com/saphelp_ep60sp2/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm
Hope it helps
Detlev

Similar Messages

Upload language

Hi all,
in 4.5WS SP2 when you upload a file, you have a setting:
"The majority of this content is in the following language".
How can I change this setting? Even if my portal is in italian, when I get to this step I have "english" as a default.
thanks a lot
Mauro

Hi Asher,
see http://help.sap.com/saphelp_ep60sp2/helpdata/en/e7/cb7339fb23644fa9e406c6bc431c9b/frameset.htm and / or http://help.sap.com/saphelp_ep60sp2/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm
Hope it helps
Detlev

WLC 5508 - Error When Uploading Webauth Bundle

Currently have a WLC 5508 running 7.4.110.0. I'm trying to upload (download) a webauth bundle to the controller from the web interface and am getting an error. I've tried using FTP, SFTP and TFTP and get a different error with each. When I started out with this, I was using a modified login.tar. Thinking this was the problem, I switched to using the login.tar file included with the Web Authentication Bundle version 1.0.2 downloaded from the Cisco site. This file fails with the errors below. Does anyone have suggestions as to what I'm doing wrong? Is this is a known bug in this version of the software? Thanks!
For FTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 13:51:12.942: #UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:5631
Error FTP file Transfer [ftp_get], <30>, Read-only file system.
For SFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 14:52:58.779: #UPDATE-3-SFTP_TRANSFER_FAIL: updcode.c:5869
Error SFTP file Transfer [sftp_get], <11>, Resource temporarily unavailable.
For TFTP:
The web interface shows:
% Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
Log on the controller shows:
*TransferTask: May 28 15:02:39.232: #UPDATE-3-FILE_OPEN_FAIL: updcode.c:4593 Fai
led to open file webauth.tar.
*sshpmReceiveTask: May 28 15:02:39.153: #OSAPI-3-MUTEX_FREE_INFO: osapi_sem.c:10
87 Sema 0x2b32def8 time=11504 ulk=18587678 lk=18576174 Locker(sshpmReceiveTask s
shpmrecv.c:1662 pc=0x10b07938) unLocker(sshpmReceiveTask sshpmReceiveTaskEntry:1
647 pc=0x10b079

Hi,
1. Did you used PIcozip to compress your webauth bundle?
2. Did you try only with one laptop , if yes then try to use other one.
3. Just try to upload default webauth bundl from cisco to wlc and show the result to us.
7.4.121.0 is very stable version.
Regards

HOW TO upload linux drivers to OES SP2 linux driver store

Hi everyone,
I couldn't get iprntcmd to upload a linux driver to OES SP2 driver
store. Tried everything. Drove me crazy.
The solution I finally came up with is multi-step but it works. Do
this as root.
First:
You can't upload the drivers in compressed form (.gz extension) so to
expand them all you run
for filename in /usr/share/cups/model/*.gz; do gunzip
/usr/share/cups/model/ "$filename";done
This expands all the zipped files in the driver directory.
Second:
Run the following to upload the drivers to the driver store:
for filename in /usr/share/cups/model/*.ppd; do iprntman driver linux
-upload -username admin -P novell -from-ppd
/usr/share/cups/model/"$filename";done
Obviously, you need to substitute your own username and password (-P
parameter). If you don't add the username and password, you'll be
prompted for them for each driver uploaded.
It's not pretty, but it'll get you there.
Regards,
Don

Don,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Error when uploading "The bundle identifier cannot be changed from the previous version"

I have an app on the App Store created with DPS, Single Edition a long time ago, shortly after DPS SE became available. Now I've updated the app, built a new version with DPS App Builder, created a new version of the app in iTunes Connect, and tried to upload the Distribution zip file using application loader. I'm getting 2 error messages:
"This bundle is invalid. The bundle identifier cannot be changed from the previous version. If you want to change your bundle identifier, you will need to create a new application in iTunes Connect..."
and
"This app contains an embedded provisioning profile that is not associated with your account. Please use a provisioning profile associated with Team ID ..."
I've done this several times before with other apps, and never got these errors before. Any ideas of what is going on?
I'm able to view the developer ipa file just fine on my iPad.

Nevermind. I left for lunch, returned, took a fresh look at it, and discovered that it was a stupid human error on my part.

Can´t install KB961143 on Spanish language server SBS 2003 SP2

We need to apply this KB961143, we found
Hotfix SBS2003SP1-KB961143-X86-ENU.EXE but is doesn´t work with our server
2003 SBS SP2 - Spanish-
Thanks.

Hi LCSMAR,
Based on your description, it’s hard to narrow down the root cause. Would you please let me know the complete
error message that you can get when fail to install this Hotfix?
In addition, please check if .NET Framework 2.0 installed before you apply this Hotfix.
Meanwhile, please check if you have installed
KB2028492. If not, please install KB2028492, then download the Hotfix
here manually and check if you can install it successfully.
If this issue still persists, please refer to the following article to reset Windows Update components and
monitor the result.
How do I reset Windows Update components?
By the way, please check Event Viewer and log file if you can find some relevant errors. Those may help us
to go further.
Hope this helps.
Best regards,
Justin Gu

Material Description in Chineese language

Dear All,
I am trying to upload language key ZH - Chineese and material description in chineese language by bdc and Lsmw from text file. But after uploading, text is showing in some other format which is not chineese. Please give me some suggestion to overcome this problem.
Regards,
Mohit.

Hallo.
Do I need to logon in ZH language to do this?
My system is Unicode, so I would like to connect in english (or italian) language, and after enter material description in chineese language without logon in chinese language.
After I will nedd to enter in arabic language, so I suppose that it is equal.
Thanks.
Mario

Upload material description in mm02

i want to upload material description in mm02 using bdc but i dont know how to upload it. Moderator Message: This is not a training forum and we cant help you there
my text file is like
2000251 AF A12345
2000251 AR B12345
2000251 BG C12345
2000252 AF F12345
2000252 AR G12345
2000252 AF H12345
in same material number there r more then one text then how can i upload .
                              'SKTEXT-MAKTX(02)'.
clear COUNTER.
counter = 1.
LOOP AT IT_TAB INTO WA_TAB WHERE MATNR = WA_ITAB-MATNR.
counter = counter + 1.
     CONCATENATE 'MAKT-SPRAS(0' COUNTER ')' INTO V_CHAR. "(02)
      PERFORM BDC_FIELD       USING V_CHAR
                                    WA_TAB-SPRAS.
      CLEAR V_CHAR.
     CONCATENATE 'MAKT-MAKTX(0' COUNTER ')' INTO V_CHAR. "(02)
     perform bdc_field       using V_CHAR
                              WA_TAB-MAKTX.
*perform bdc_field       using 'SKTEXT-SPRAS(02)'
                             'AF'.
*perform bdc_field       using 'SKTEXT-SPRAS(03)'
                             'BG'.
*perform bdc_field       using 'SKTEXT-SPRAS(04)'
                             'CS'.
*perform bdc_field       using 'SKTEXT-MAKTX(02)'
                             'avani'.
*perform bdc_field       using 'SKTEXT-MAKTX(03)'
                             'avani1'.
*perform bdc_field       using 'SKTEXT-MAKTX(04)'
                             'avani2'.
clear wa_tab.
ENDLOOP.
Edited by: kishan P on Nov 13, 2010 2:32 PM

in mm02 Basic Data -> additional data -> material description and language
i want to upload language and material description

Localization of Languages in SAP Portal 7.3

Hello Folks,
We have implemented SAP Portal 7.3 and want to include local Indian Languages (Hindi, Marathi etc) for the users. We referred the SAP Help Portal for customizing languages applicable for older portal versions
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/49/e607426338da6fe10000000a1550b0/content.htm]
From the link above, we searched for an .EAR (com.sap.security.core.admin.730.ear) and .WAR (com.sap.security.core.useradmin.war) files respectively for any of the standard properties file supplied with standard implementation. But, we did not get such files.
Kindly suggest/guide us to any documentation/help available to find the required files in the SAP Portal 7.3 version. Or is there a change in language customization from Portal 7.3?
Regards,
Rahul Juneja

Dear Rahul,
Hindi language is not yet available in portal. You can check the below
link to see which are the Languages supported.
https://websmp207.sap-ag.de/languages
You have to create your own Language Bundles to implement hindi,
But as of now hindi is not supported.
Can you please go through the Sap Note 1013521.
Regards,
kiruthika

Adding Danish language pack to Torch 9800

My Torch 9800 will not allow me to add Danish as an imput language. How can I fix this?

You can use other Carrier's OS. Try any Danish Mobile Carrier just make sure you delete the vendor.xml files before you install it (How to locate vendor.xml files) . I'm not sure it'll work because I never used Danish input on my BlackBerry, but I think it's worth a shot. Goodluck!
BlackBerry Device Software:
The language bundles available with BlackBerry Device Software depend on the wireless service provider. By default, the following language bundles are available:
English only
Multi-languageThis package includes Afrikaans, Arabic, Catalan, Czech, Danish, Dutch, English, French, German, Greek, Hebrew, Hungarian, Italian, Korean, Polish, Portuguese, Spanish, Swedish, and Turkish
East AsiaThis package includes Arabic, Chinese,Czech, Dutch, English, German, Greek, Hebrew, Hungarian, Japanese, Polish, Portuguese, Romanian, Russian, Spanish, Turkish, Thai
All LanguagesAll supported languages
Notes:
There is no guarantee that languages in the preceding lists will be available with the BlackBerry Device Software specific to your wireless service provider.
Afrikaans, Danish, and Swedish are not available to select in the languages list and auto-text is not supported. Limited input is supported for these languages because the default BlackBerry smartphone character set can be used. For example, if Afrikaans is not selected from the languages list, Afrikaans AutoText cannot be supported.
Localization support for BlackBerry smartphones
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Language used by an OVS

Hi!!
I'm using an OVS in an application which is in Spanish, but the OVS shows the fields labels in English.
Which configuration does this depend on? How can I control the language used by the OVS?
Thanks a lot!

Hi Monteverde
here you need to consider 2 thigs
1) Set your User's Language profile in portal to Spanish
2) You need to import Language Bundle available in ".xlf" format into Developer Studio
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/internationalization%20of%20web%20dynpro%20applications.pdf">Try this Tutorial</a>
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/21/9499f2f50ca44a85e9611f14fbdc21/frameset.htm">Information</a>
Regards
Chaitanya.A

Cisco 5508 HA - Webauth Bundle for multiple SSID/multiple web pages

Hi Guys,
I have 2* cisco 5508 WLC in HA mode . Both are running IOS 7.5.102.0 . Everything is working perfectly fine.
I need to Creat 3 differnet SSID and Creat 3 different login Pages for them . Each user from respective SSID will get specified login Page. like
I have few questions :
1) I have downloaded webauth bundle from cisco Support Site and in that itself so many files are there. So based on my scenario , in which folder do i need to copy my login and logo file.
2) i have used Picozip to convert the file in .tar format but its giving me following error "
% Error: Webauth Bundle file transfer failed - No reply from the TFTP serve" but i can ping my tftp server easliy.
3) As Controllers are in HA mode , so once i am successful in uploading webauth bundle then it will be replicated on secondary controller or do i have to turn off SSO and upload in both one by one.
Please help me out in this.
Cheers

Hello Sandeep,
i have uploaded the tar which you have sent to me. When i supply my username and pwd, after that it keeps on going and not showing any end result. so it stays on same page and nothing happening after that.
Are there any more radius ACL's to be defined ? 10.10.13.x is wireless client network , 192.168.10.21 is Radius Server , 192.168.10.215 is proxy server. Is there any other ACL need to be defined ??
                       Source                         Destination                 Source Port Dest Port
Index Dir       IP Address/Netmask               IP Address/Netmask       Prot    Range       Range    DSCP Action      Counter
     1 Any      10.10.13.0/255.255.255.0     192.168.10.21/255.255.255.255 Any     0-65535     0-65535 Any Permit           0
     2 Any   192.168.10.21/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit           0
     3 Out      10.10.13.0/255.255.255.0           1.1.1.1/255.255.255.255 Any     0-65535     0-65535 Any Permit           0
     4 In         1.1.1.1/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit           0
     5 Any      10.10.13.0/255.255.255.0    192.168.10.215/255.255.255.255 Any     0-65535     0-65535 Any Permit          98
     6 Any 192.168.10.215/255.255.255.255      10.10.13.0/255.255.255.0    Any     0-65535     0-65535 Any Permit          98
DenyCounter : 12

Viewing/uploading customized WebAuth pages

Howdy,
I've got a 5508 running 7.6.100 acting as an anchor in a remote location. It is using customized WebAuth pages but I'm needing to verify the actual html content of those pages as they are in use today. Downloading a new WebAuth bundle is easy, and I know I can preview the WebAuth login page, and I've got the pages that 'should' have been downloaded to the controller- I need to see what's there now. Alas, because of my location, I can't simply toss a client on the WLAN to examine the pages either.
Before having to overwrite the existing pages, does anyone have a way to upload or view customized pages on the WLC?

AHA! CLI and Google-fu remain my best friends.
Although the GUI in this version does not allow UPloading WebAuth bundles from the WLC, you can do it from the CLI, you just need the commands....
Fire up your TFTP server (you could use FTP), and set the transfer commands using CLI on the WLC
TRANSFER UPLOAD MODE tftp
TRANSFER UPLOAD DATATYPE WEBAUTHBUNDLE
TRANSFER UPLOAD SERVERIP tftp-server-address
TRANSFER UPLOAD FILENAME destination-filename
TRANSFER UPLOAD START
Check your settings and click 'y' to start
Viola, a copy of the current WebAuth bundle! Unzip the bundle and you can see the current web pages used.

Restrict available languages in portal

Hello forum,
We operate EP 60_SP14 and want to restrict the available languages in the portal.
In the logon screen, the language is detected based on the client browser setting; we can do without this 'automatic' detection and prefer to have a localized logon page that is displayed in the default locale/language.
Is there a possibility to restrict available languages/locales by a method such as to set the default locale (Re: Change default English Locale)
Additionally, if we could provide our users with the possibility to choose which language they want to log on with this would be a plus. We have set ume.logon.locale=TRUE (in UME properties) so that a language selection box is displayed on the logon screen, but this box contains all the languages.
Is there a possibility to restrict this list (in the logon screen) such as you can do within the portal (http://help.sap.com/saphelp_nw04/helpdata/en/49/e607426338da6fe10000000a1550b0/frameset.htm)?
Thanks for your hints!
Kind regards,
Walter

Hello Detlev,
We need to provide access to the portal in two languages only; our default language is dutch (nl) and we want to provide users with the possibility to switch to english.
Therefor, I would like to switch off the automatic language detection and don't use any setting the browser sends, but rather just use 'nl' as the language in which the logon screen is displayed. (we can and will accept the fact that the logon screen is only in dutch).
Instead of translating the logon-screen however, I think that forcing the language to 'nl' is a more neat solution. For example, is there a possibility to set the portalapp.xml property <property name="ForcedRequestLanguage" value="nl"/> for the logon screen somewhere?
Would we not be able to force the language into dutch then removing the language bundles could be a solution. Can you direct me to instructions on how to do this neatly? I guess that just removing the language bundles will still leave me with all the languages selectable in the combobox at the logon screen.
Finally, setting the ume.logon.locale option seems to work; the combobox from the logon screen allows us to select a language without problems. Instead of manually edit-ing the code; I want to restrict languages in this box to Dutch and English.
Thanks so far!
Kind regards,
Walter

Buying native language software

My family have recently bought 3 iMacs (+ MBAir and ipods etc) and really enjoy using them. Our intention is to run a business from home and this hardware fits the bill for our creative aspirations. However, there is a HUGE problem for us. We live in Spain and however hard we try, we cannot buy new software in English without contacting Apple and making a special arrangement. This takes days and is on the whole pretty irritating. I would like to upgrade to Quicktime Pro but again, it is only available in Spanish through the Spanish store.
I really think Apple should consider this problem because there must be thousands of expats across the world who would prefer to buy software in their native tongue but are limited by location. Interestingly, the original software that came with my Mac is English so it must be possible.

Hi(Bonjour)!
There are usually many languages bundled with Apple software. I do not know if FCE include spanish.
The specific language you choose when you buy the software set the language for packaging and paper documentation.
The users have 2 ways to set language for application.
First, use the international pref panel and drag the desired language on top of the list (as suggested earlier in this topic). Your mac will use this language. All application (like QT player in your question) will use this language.
The second way is to select the application icon and use the get infos command (COMMAND-i). From this point uncheck the undesired languages. The next time you'll start this app, this settings will bypass the system language.
Example: I use my mac in French, but I use Final Cut express in english (for forum purpose) using this tips.
Michel Boissonneault

Upload language bundle in p6 sp2?

Similar Messages

Maybe you are looking for